Mac Mini and Air Port Express

I bought Airport Express today for my Mac mini. I tried to hook it up and nothing is happening. All I get is the amber light flashing on and off. Do I need the base station (Airport Extreme? What am I doing wrong? I am connecting with a cable wire.

Hello SoulRyder. Welcome to the Apple Discussions!
I assume that you had your Mac Mini connected directly to your cable modem using an Ethernet cable prior to getting the 802.11n AirPort Express Base Station (AXn) ... correct? ... and that you were not having any issues accessing the Internet when connected this way?
If the answer is yes to both, the it is always a good idea to perform a complete power recycle of your network components when introducing new devices.
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AXn, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AXn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AXn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AXn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Similar Messages

  • Mac Mini with Air Port & Mac Mini w/no Air Port - how do I network them?

    I want to put in a wireless network so that my two Mac Minis can both access the internet. One Mac Mini (2007) has an airport built in - the other does not. I purchased an Air POrt station but doesn't seem to work with the Mini that has no Airport built in. Should I use a Router?

    Can I connect my Mini with no Air Port to the new Airport Station and then connect the Airport station to my DSL Modem? That would the leave my other Mini with Airport free to connect wirelessly through the Air Port Station - correct?
    Yes, that is correct. There are a number of different Airport base stations you could have, but unless it is an Airport Express (slightly larger than a cigarette packet in size) it will have a WAN port (which connects to the DSL modem) and at least one LAN port (to which you can connect a computer with a suitable ethernet 'patch' cable). The latest Airport Extreme base station has three LAN ports, you can use any of them.
    If you have the Airport Express base station, it only has ONE ethernet connection, so it can't be used to connect upstream to the modem and downstream to the computer at the same time. However, you could then try your Buffalo wifi base station instead - it may not state that it is Mac compatible, but as long as it meets the standards laid down for wifi, it should work just fine.
    I thought my Older Mini had to have the Air Port card installed in order to connect at all to the Station.
    No, it only need an airport card inside for wifi connection. The ethernet port on the back works with or without airport installed.
    I thought I tried this and it didn't work but perhaps I did it wrong.
    Without familiarity with these devices and systems, it's very easy to 'get it wrong'... and very hard to figure out what the problem is! Reading the manual for the base station will help you, as will looking at the sort of article Neil linked to earlier.
    If you connect everything up and it doesn't work, post back with details of how you have connected things, how you have configured them, and what is happening - the more detail the better since small things can make a big difference in whether networks work or not!!

  • Mac Mini and AIR Travel - Experiences, Please

    Hey people, can any of you share your experiences with bringing your Mac Minis on planes? I'll be carrying it on myself, no checked baggage. And please nobody say "FedEx" it or anything like that - it's not an option for me, going overseas. Too pricey.
    I'll take any tips or stories. Thanks!
    Steve

    Steve
    "what's the worst? They can't really just tell you you can't bring it on because they don't know what it is."
    In USA, yes they can or at least not let you board. They will let you ship it or if lockers are availible out side security area store it till you return.
    But ,if it is in your checked bagage it sails right thru....just a minor loop hole in the system that ,I guess, the Homeland Insecurity folks assume the bad guys won't think of.
    Maybe; as a backup, if you take a flat shipping box and some bubble wrap you might be able to ship it by mail or FedX etc. at airport without missing your connection if worst case happens.
    iMac (15'' Flat Panel)   Mac OS X (10.4.5)   Blueberry iBook OS X (10.2.8)

  • I have air port express 802.11n and imac ver 10.7.5.  When I try to set up my wifi I get error message 'that the version mac os x is not supported' Help?

    I am trying to set up wifi using air port express 802.11n version 1.3 on my imac os x ver 10.7.5.  Get error message Air port can't be installed on this disk that the ver of mac not supported - Help????

    Please check the model number on the side of the AirPort Express in the faint print. It will start with an "A" followed by four numbers, as in A x x x x.
    Post back with your findings.

  • I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

    I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
    I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

    If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal.  In this type of setup, each Express communicates directly to the Time Capsule.
    How did you setup the AirPort Express devices?
    What version of the Mac operating system are you using on your MacBook?   Or, do you have AirPort Utility installed on your iPad?

  • Airport Express problems with new MAC MINI and DLINK router SOLVED

    Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
    I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
    Problem was briefly
    Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
    also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
    Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
    last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
    I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
    between us we carried out the folowing and resolved the problem and I am now very happy
    mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
    This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
    Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
    We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
    we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
    this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
    you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
    Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
    Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

    Hello macfar14. Welcome to the Apple Discussions!
    For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
    Just to be sure nothing was missed, here are the basic steps to do this:
    Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
    AirPort > Wireless
    o Wireless Mode: Join a wireless network
    o Network Name: <existing wireless network's Network Name or SSID>
    o Wireless Security: <select the encryption type of the existing wireless network>
    o Wireless Password: <enter the existing wireless network password>
    o Verify Password: <re-enter the existing wireless network password>
    Music
    o Enable AirTunes (checked)
    o iTunes Speaker Name: <enter desired speaker name>
    o iTunes Speaker Password: (optional)
    o Verify Password: (optional)
    o Click Update to write the new settings to the AX
    In iTunes:
    iTunes > Preferences... > Advanced > General
    o Look for remote speakers connected with AirTunes (checked)

  • Air port express and ipad, iphone, apple tv

    i have my audio speakers plgged into my 3 air port express for 3 rooms in my house. when i use my old apple tv, i can play my music on all 3. however, on my ipad, itouch and mac computers, i can only do one at a time. Why?

    The iPod Touch does not have the "Multiple" speakers function.
    You only get one choice.
    I have 3 Airport Express units and this is just the way Apple has it setup for the iPod Touch.
    You should be able to choose all 3 on your Mac.
    Look at the bottom right of your iTunes window and you should be able to choose multiple speakers.

  • HT4259 We decided to set the Air Port Express in a room using only the power outlet and relying on the existing wifi signal...we have a verizon modem and didn't want to mess with connecting the Air port express directly to the verizon device.  It didn't w

    I bought a Air Port Express device from Apple yesterday.  We decided to set the Air port device in a room near the router to use as a wifi extender to areas of the house where the signal is weak.  In our discussion with Josh, the Apple Rep.  he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house.  We have verizon DSL.  Our town is very small...no cable provided so we are lucky to have what we have...some areas of our town can't even get what we have.  We, didn't want to connect it directly to the Verizon device (router)....we followed the directions from Josh as well as the explicit directions provided by Apple support...it didn't work. We keep getting an error message.  Does anyone have any advice ?  Any help would be greatly appreciated.  Please speak in "Laymen's terms"  I am not technically savy....but..am determined to get this set up.  Thanks to anyone, in advance!
    Signed,
    MEAbeep

    In our discussion with Josh, the Apple Rep.  he explained how it can either be connector to the router or use in another room relying on the existing wifi signal to extend it further into the house.
    Unfortunately, it appears that Josh was not aware that the AirPort Express can only "extend" a wireless signal from another Apple router.
    From Apple's literature:
    Extend an existing Wi-Fi network’s range.
    If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, Time Capsule, or another AirPort Express — and near the area where you want your wireless connection. Launch the easy-to-use AirPort Utility app on your iOS device or Mac, and you’re mere minutes away from long-range Wi-Fi enjoyment.
    The AirPort Express is not compatible with a Verizon product for this purpose.
    Your might want to have another conversation with Josh to ask his advice on how best to proceed at this point.
    If you do decide to keep the AirPort Express, it will be necessary to connect it to your Verizon router using a wired Ethernet cable connection if you want the Express to provide more wireless signal coverage.

  • HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

    My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

    Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
    On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

  • Share snapshots here, Air Port Extreme and 2 Air Port Express are working

    is there a way to attach snapshots here
    after 1 week I fig out how to get it to work in windows XP using my FIOS router and my Air Port Extreme, but before anything make sure you have the MAC address of all the Apple devices
    As I config my devices(Air Port Extreme and 2 Air Port Express) I took snapshots since I did not want to go through this again

    Unfortunately, if the light is out, the outboard power supply has failed, or the internal power supply has failed.
    If you have a voltage tester, check the outboard power supply for 12 volts. If it delivers 12 volts, then the internal power supply on the AirPort Extreme has failed, and you will need to replace the AirPort Extreme.
    If the outboard power supply does not work, you might be able to replace that outboard power supply to get things working again.
    Take the AirPort Extreme to an Apple Store....if you have one near you.....to let them take a look.

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Mac mini  and macbook air startup takes hours

    When I restart my mac mini, it takes approximately 16-18 HOURS to boot. During this time the grey screen is displayed with the Apple logo, and the turning wheel is turning and turning but nothing happens.
    I updated the mac mini to Mountain Lion.
    What is funny, my macbook air has exactly the same problem. So I dont think that this is a hardware related problem. My macbook air takes about 8-10 hours to restart.
    Anybody has the same experience or has a solution?
    Again, both my mac mini and macbook air have this problem.
    Thanks!!

    Whew, this is incredible!?
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free Disk space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?
    Open console in Applications>Utilities, check the system log for the date/time of the last  Startup for clues.

  • I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook  while travelling, it will not be on my Mac mini when I get home :(((

    I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook  while travelling, it will not be on my Mac mini when I get home :(((

    Hey iWeb plubishing problems,
    I would first check to make sure that you meet the system requirements for OS X to support Documents in the Cloud. For that your Mac’s needs to be running at least OS X Lion 10.7.5 or later to make sure that everything syncs. Take a look at the article below for more information. 
    iCloud: Troubleshooting Documents in the Cloud
    http://support.apple.com/en-us/HT203517
    Take care,
    -Norm G. 

Maybe you are looking for

  • Issue Exporting TIFF Files in Lightroom 3

    When exporting files from Lightroom in a TIFF Format Lightroom is applying specific dimensions to my photos. How do I make this stop so my files maintain the original image size? For example.  Original Photo - 4256 x 2832, 10.8MB .NEF File shot on D7

  • Copy and paste images  altered using Instant Alpha

    I have put many hours cropping and altering images with Instant Aplha. I want to save these images so I can use them in other files. I have tried to copy and paste but i get nothing. I have trying dragging them but that does't work either. What am I

  • "Add to Audition" grayed out

    I have a multicam clip that I created and is edited by varioius angles in the timeline. However, there is a section of it I wan to possible replace with a re-do of that section. I have a seperate multicam clip ready to go and I want to use the auditi

  • Prevent Passcode From Being Set

    Hi all -- My younger brother keeps setting a passcode on his iTouch and then forgets what it is. I have had to restore the iTouch several times now. Is there a way to prevent him from creating a passcode? Thanks in advance!

  • There are error " READ_SWITCHSTATES_FAILED"

    hi, all.      How can i do well?When i look over the function with SE37 the error will apper."The import of the current switch configuration from the database into an internal switch status buffer has failed." "Error analysis     The error when impor