Mac mini and cube speakers

Hi, I was trying to use the Cube USB speakers with the Mac Mini. They seem to work, the system recognizes them, I can see them in the list of devices in System preferences -> Sound -> Output.
The problem is that the volume is very low even when I put it to the top.
Is it wrong using these USB speakers with the Mac Mini?
Thanks
ben

The Cube's USB speakers require a bit more power to operate fully than most USB ports can deliver. The Cube itself (and compatible Apple displays of the time) had USB ports that were enhanced to cope with the extra power demand. In the absence of that extra power the speakers would not perform correctly. The document at http://docs.info.apple.com/article.html?artnum=58676 explains this.
You might find you can get better performance if you use a powered USB hub, and if you've got one handy it may be worth a try. Otherwise I suspect you may be better looking for a more orthodox solution.

Similar Messages

What kind of cables do I need to hook up the mac mini and stereo speakers

I

Depends what kind of TV you have.
RCA jacks? http://store.apple.com/us/product/MC748ZM/A?fnode=MTY1NDAzOQ
HDMI input? http://store.apple.com/us/product/MC953ZM/A

I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

Are you using HDMI or an Apple Airplay Module to go to the TV Speakers?
If you are using an HDMI it's straight through output. The internal speakers are disabled.
If you are using an Airplay Module:
- Go on iTunes
- Locate the Airplay icon that has a TV with an up arrow icon much like your iPhone has for Bluetooth
- Click on that and Airplay to ModuleName

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

I have a first edition mac mini and internal speaker are not enabled yet.. what can I do?

I have a first edition mac mini and internal speaker are not enabled yet.. what can I do?

If you are using an HDMI connection, go to Apple / System Preferences / Sound and see if you can select the Built-In Speakers?
If you have headphones, buds or something plugged into the Audio Output jack, unplug it.
If not then perhaps the micro switch inside the Audio Output jack is stuck? In that case, try plugging and unplugging some headphones, buds or something in and out a few times to see if it will un-stick.
If it will not un-stick, then you will need to make an appointment for service.
see > Apple - Support - iMac - Service FAQ

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

I suspect the monitor has an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor?

Just got a new mac mini and I can't figure out how to authorize it. Help!

Just got a new mac mini and cannot figure out how to authorize it. Help!
m

Link your phone number and Apple ID for use with FaceTime and iMessage

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

Connecting new mac mini and a pc to internet

I have ordered a new mac mini and airport express to connect it to my broadband connection. I have a none wireless pc already connected to the DSL. This is a usb connection to the pc.
Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port? Will this work and would the Mac then pick up the connected printer?

Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port?
No, this will not work. To use an AirPort Express (or AirPort Extreme) base station, you will need a DSL modem that has an Ethernet port. The reason is that the USB connection requires a software driver to be installed on your computer. Since it's not possible to install drivers (Mac OS, Windows or otherwise) on the AirPort Express because it's not a computer, you'll need to use the Ethernet port. I would recommend you visit the AirPort Express forum. There are some knowledgeable people there who can help you find a new modem that has Ethernet and get everything configured for you.
-Doug

Mac mini and cube speakers

Similar Messages

Maybe you are looking for