Mac mini and external superdrive

hi
yesterday buy a new mac mini core i5 with a external superdrive and have the next probleme:
when insert a dvd movie the external superdrive no read the movie, only eject the dvd.
what probleme have.
thank you so mutch.

I'll correct myself:
I think you will find that you can't boot from that
drive because it's a USB device. Intel minis can
USB-boot, but PPC systems can only do so from
firewire externals.
Actually some users have had success booting (rather slowly) from USB devices on some Macs, so the above is not universally true. However, if the drive is bootable and the mini recognizes it as such, it will show in the boot loader screen when the system is started with the Option key held down. If it does not appear in the screen and it is correctly attached and powered and has a valid install disk for the system loaded in it, then it isn't bootable.

Similar Messages

  • Mac mini and External Optical drives

    hi all,
    just wondering if i'll be able to use external optical drives with my mac mini which doesn't have a DVD writer, it detects and mounts in OSX, but can't playback a dvd or burn, do i have to use any third party software like roxio?
    any help would be much appreciated.

    You omit specifics but this might help, especially if you already have an external hd on firewire and plan to add an ext optical drive to the firewire chain. Burn Disk created one perfect DVD (consisting of backup files) but then became flaky, dying during burns. Patchburn (www.patchburn.de) did not help this problem but it did change system profile of the new optical drive from: 'unsupported' to 'vendor authorized' which may have helped generally. With Panther it will be required!
    I did lots of searching on Web, Groups & Apple Discussions but could not find anything on "Error: 0x80020020: BE, sense error, etc".
    I discovered the solution to this problem: I put the DVD external drive between the Mac Mini & the external harddrive (instead of at the end) and now BurnDisk works 100%. "Sense Errors" were common back when I was using SCSI drives and usually pointed to cable length issues. This was the simplest alteration I could make to my PPC G4 Mac Mini setup. I am using the 3 ft shielded cables that came with both of my external enclosures so it is reasurring that these did not have to be modified.
    Now Burn Disc creates solid DVDs of backup folders, no more coasters or long pauses in the burning process, followed by the inevitable error code.
    Using Pioneer DVR-112D drive in a generic ext enclosure. The drive is current production so I have not modified the firmware. Using Memorex DVD-R from WalMart.
    --

  • 3 x Mac minis, with external superdrives, incapable of importing a CD cleanly. ***?

    I have three mac minis, each without internal drive, rack mounted in sonnet rack mac enclosures. Each one is directly connected to macbook air superdrives - as sold to me by the mac dealer.
    None of these units is capable of importing a CD of any kind cleanly. They all skip the first couple of seconds of a track or play it a few times. I have tested all systems by swapping out the superdrives but always the same thing. Currently the only way to import music on these machines is to import the CD on the desktop mac then put the tracks on to a USB drive.
    What do I do?
    The minis are only about 4 months old, as are the superdrives. They all have Lion installed.
    It's important that they have CD drives as they are primarily used for audio playback.

    Hi Woodmeister
    They are 2.3GHz Intel i5 machines with no internal CD drive. They have 2Gb ram and are running OSX 10.7.2.
    The Macbook air superdrive is plugged in directly to to the back of the mini.
    I thought it might just be a bad import but for each disk the errors seem to be fairly consistent across all the computers even using different disks, different drives and different minis. I haven't yet got a successful full import of a CD. It usually messes up the beginning of the first track (by going backwards and forwards over the same bit over and over), and then again about 5-6 tracks in of a normal CD (same thing). It doesn't seem to make a difference whether it's a bought or burned CD.
    I have used iTunes, QLab, and Finder to import the CDs and it's always the same.
    Thanks

  • I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

    I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

    Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
    OS X Mountain Lion: Burn a CD or DVD may help.

  • Mac Mini and thunderbolt/vga to LCD TV

    Hi All,
    Here is an interesting one......
    I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them.  The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
    The HDMI/DVI is not used.
    In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
    If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor.  If I then change cables without a reboot, the LCD TVs show correctly!
    I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary.  However, on reboot it's as if the details are all forgotten!
    Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs.  That said, I wanted to put my environment out there and see if anyone had an ideas.
    Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
    Thanks for ANY ideas!!!!

    Hey Spost!
    You have explained exactly what happened to me last night.  I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week.   I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.  
    Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet"  airplaying prior to the move worked great ... then last night 4:3 Green Screen. 
    My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out.   Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac. 
    Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run. 

  • I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    1. Remove the drives, install them in external enclosures.
    2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

  • Access files on mac-mini from external hard drives hooked to PC...

    Have two external hard drives hooked up to my PC. I am in the process of daisy-chaining (via firewire cable) from the one external-Hrd-Drv (only one that has firewire input) to my MAC-MINI. APPLE STORE REP says it will pick up BOTH hard dirves (through a "daisy-chain" -like cycle) and that their icons will just pop-up on my mac-mini. So, it's all hooked up and then I clicked over to the mac-mini and there's NOTHING. Both hard-drive icons are no where to be found! There still ONLY found on my PC, of course. Once a again, I was told that my mac-mini would pick-up or access both hard drives from my PC by JUST using a firewire cable! I've done that and I'm having no such luck. Is there a way to do this? Please Help...thanks!

    Can you re-state exactly what drives are connected to which computers, and how?
    An external hard drive plugged into a PC (or, indeed, even another Mac) on your network will not automatically "show up" on your Mac mini, no matter whether it's USB, Firewire or what. The only way you can even connect to it from the Mini would be to share it out from the PC as an SMB/CIFS (Windows file sharing) share across the network.
    Matt

  • Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this?

    Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player.  Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

    As posted previously:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    If installing Leopard the process is similar in some respects.  If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button.  To install over an existing system do the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Mac Mini and USB 2.0 hubs (hubs stop working within a month)

    I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
    I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
    One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
    I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

    Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
    There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
    The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
    The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
    So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
    Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
    Message was edited by: blick
    Message was edited by: blick
    Message was edited by: blick

  • Getting error "The disk you inserted was not readable by this computer." on mac mini and imac but it works on old macbook pro

    Please help! My hard drives work on all other computers except new imac and macmini.

    Both the mac mini and imac do not have cd drives. The trouble is why should I repair the external HDs when they work fine on other computers? I'm running OS X 10.8.4. I feel like its an OS X problem but I cant say. I will try the suggestion but I absolutely cannot reformat these drives right now becuae it would be way too time consuming to recover all the files on them

  • MAC mini and Photoshop CS6

    Dear all,
    I want to swich to MAC from my current Windows PC.
    I'm thinking about to use a MAC mini because I have a good external display, so the iMAC is not necessary.
    But I would like to know if the MAC mini is powerful for using Photoshop CS6 (image editing, no 3D).
    Does someone has experience with a MAC mini and using Photoshop??
    Thanks a lot in advance for your support!
    Alecs

    The mini uses Intel's integrated graphics rather than a discrete GPU which puts it at a small disadvantage compared to the iMacs.  I'm not a graphics professional but I use Photoshop extensively in my work and use it on my MBA (which is a bit slower than today's minis and also uses Intel's integrated graphics)  as much as my much faster iMac. Since loading and saving large PS files can be time consuming you might want to consider the Fusion model to get the benefit of SSD speeds.

  • Mac Mini als externe Festplatte nutzen

    Want to buy a MacMini and want to connect it to my 27" imac as an external hard drive, is this possible? And wenn yes do I connect is with fire wire or thunderbolt?

    Have a look at > How to use and troubleshoot FireWire target disk mode
    and > Thunderbolt ports and displays: Frequently asked questions (FAQ)
    To me, it seems like a lot of extra expense to buy a Mac Mini and only use it as an External Hard Drive?
    Why not buy something like a Drobo, a Thunderbolt External Drive or a couple of large FireWire / Thunderbolt External Hard Drives.

  • How do i move files from mac mini to external hard drive

    how do i move files from mac mini to external hard drive

    The simplest method would be to drag & drop the files you want to move to the external drive using the Finder. Just open both the source and destination locations in separate Finder windows.

  • Where can i get setup cause i formated my mac mini and now i am not able to download cause i did not have any backup

    where can i get setup cause i formated my mac mini and now i am not able to download cause i did not have any backup

    How did you format your Mac Mini? Did you restart into Recovery Mode (Command+R) and erased your Macintosh HD? Or did you use some external drive or DVD to erase it?

  • How to use mac mini as external hard drive

    trying to wipe an old mac mini and use as external hard drive for my iMac.  Help!

    Connect them with a FireWire or Thunderbolt cable and start up the Mac mini with the T key held down. If desired, use the Disk Utility in the /Applications/Utilities/ folder to erase it.
    (86231)

Maybe you are looking for