Mac mini and flash

Does the Mac Mini support a Flash Player?

Yes. Mac OS X 10.7 doesn't include Flash but is compatible with it.
(61777)

Similar Messages

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

New mac mini and can't access some websites

Just upgraded to the new mac mini and am having trouble with loading some sites on safari, primarily social networking sites. Also hangs up on other pages when loading (trying to load google now etc). We have not tranferred anything from the old mini onto the new one yet so not sure what the problem is. Suggestions??

First try > OS X: Updating your software
then > Adobe - Install Adobe Flash Player

Mid-2007 Mac mini and HDMI issues

I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
Super frustrating problem.

Opperman,
I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor. I tested it using the DVI cable with HDMI adaptor, and there was no sound.
I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
Cheers.
Message was edited by: Numenorean

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

I have a new MAC MINI and I want to install a second monitor. I have one connected to the HDMI and it works. I can't get a signal to the other one. It is connected from the thunderbolt to its HDMI port. How can I make it work?

Could be a bad cable or bad Thunderbolt port.
You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
You can also make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

I suspect the monitor has an ADC connector
http://en.wikipedia.org/wiki/Apple_Display_Connector
If so you need one of these:
http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
Otherwise what connector is on the monitor?

Just got a new mac mini and I can't figure out how to authorize it. Help!

Just got a new mac mini and cannot figure out how to authorize it. Help!
m

Link your phone number and Apple ID for use with FaceTime and iMessage

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help.

Connecting new mac mini and a pc to internet

I have ordered a new mac mini and airport express to connect it to my broadband connection. I have a none wireless pc already connected to the DSL. This is a usb connection to the pc.
Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port? Will this work and would the Mac then pick up the connected printer?

Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port?
No, this will not work. To use an AirPort Express (or AirPort Extreme) base station, you will need a DSL modem that has an Ethernet port. The reason is that the USB connection requires a software driver to be installed on your computer. Since it's not possible to install drivers (Mac OS, Windows or otherwise) on the AirPort Express because it's not a computer, you'll need to use the Ethernet port. I would recommend you visit the AirPort Express forum. There are some knowledgeable people there who can help you find a new modem that has Ethernet and get everything configured for you.
-Doug

Mac Mini and my TV

I was entertaining the idea of purchasing a Mac Mini and hooking it up to my TV. I have all the ports (HDMI) necesarry for this style of configuration. My only question is resolution. What should I be looking for with regards to resolution so that if I do hook up my Mac Mini to the TV, I get a clear picture...

Hi Scorogers
I am thinking about going down the same line wanting to upgrade the resolution from my ATV2.
The Panasonic TV's HD resolution is 1920X1080. The Mac Mini on HDMI will output 1920X1200 and on Thunderbolt even higher so I do not see any reason for not getting a great picture. Hopefully someone on here has it setup and could just confirm the same..........

Mac mini and flash

Similar Messages

Maybe you are looking for