Mac mini and networking

Hi. simple question. I have a mac mini bought last year, dual processors etc...
i want to set it up on a cable modem. My question is this, do I have to purchase a wireless router to connect my other notebooks to it or will the airport express wired into the mini work as the router? I am currently on my notebook (pc) on a shared network.

You could use the wireless (AirPort Extreme) capability of the Mac mini to wirelessly share the connection.
->System Preferences->Sharing->Internet->Ethernet to AirPort.
->System Preferences->Sharing->Sevices->Enable Personal Web Sharing
However you don't really have any configuration options. Your Windows PC will only be able to join if you don't use any wireless encryption.
An inexpensive wireless router will give you many more configuration options and allow you to use wireless encryption.

Similar Messages

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

New mac mini and can't access some websites

Just upgraded to the new mac mini and am having trouble with loading some sites on safari, primarily social networking sites. Also hangs up on other pages when loading (trying to load google now etc). We have not tranferred anything from the old mini onto the new one yet so not sure what the problem is. Suggestions??

First try > OS X: Updating your software
then > Adobe - Install Adobe Flash Player

My wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

my wife and i both have an itunes library installed on to our separate pc's, we are now de-commissioning the pc's and are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?

graham218 wrote:
are moving over to a single mac mini, can we install both libraries on to the mac mini and run them as separate libraries?
Generally YES.
It's possible to hold separate iTunes library's on a single machine.
Generate two new folders inside the Music folder of the Mini and name them differently; e.g. man and woman.
Copy your whole library into "man" and your wifes into "woman"
Go to sharing in the system settings of the Mini and share the Music folder in your network.
After copying the whole library's to the Mini you may point iTunes to the new location at startup by holding the option key (alt) at the keyboard.
iTunes will then ask you where the library is located.
Point it to the matching library on the Mini.
That's all.
Lupunus
PS ... If you both use only the Mini you have to setup a user account for each and just copy the whole library to the Music folder in particular.
Message was edited by: lupunus

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this?

Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.

As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Internet connection sharing between Mac Mini and Imac G3- how?

Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
Network (on the M Mini) shows
Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
Network (on the G3) shows
Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
Any help would be really appreciated
Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB Mac OS X (10.4.8)

OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
Except it's not connected to the net.
If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
So I opened port 394 (not really knowing what i'm trying) but it had no effect.

How do I sync files on Mac mini and MacBook pro

I want to sync files between my Mac Mini and my MacBook Pro. Is there a way to do this? Primarily, I want to access photos in my LightRoom Catalog from both platforms. Thanks for any help you can provide.

Note that there's a difference between sharing and syncing.
Sharing will allow you to access the files on your Mini from your MBP, but the files won't be on your MBP when you take it somewhere else.
Syncing is making both Macs have identical copies of files, so that a change on one Mac makes a change on the other Mac.
If you've got a large LightRoom catalogue and limited space on your MBP, then you want sharing. The link above should get you started with that.
For syncing, I recommend BitTorrent Sync, which is free. It's basically "DropBox without the cloud". You select a folder to sync, and then whenever your two Macs are on the same network, any file in that folder that changes is synced to the other Mac.
I use it to keep my entire Documents folder synced between my Mini and MBP.
http://www.bittorrent.com/sync
You may need to be careful about modifying the same document on both computers at the same time, though I believe BS does handle this in some way. Also, if you're syncing an app's data library, then some database files (e.g. with computer-specific data like file path names) may not sync well.
Of course, you could use DropBox, though you'll need to subscribe if you want more than a couple of GB.

Loose connection between Mac Mini and Apple TV 2

Help! I have a new Mac Mini 2.5 ghz running Lion and Apple TV2 hooked up to my 32 inch LG TV.
Before I got the Mac Mini, Apple TV was running just fine on the same network with my Win 7 machine.
Ever since I got the Mac Mini and I run the Apple Tv at the same time. I loose connection on both. My cable provider replaced the router and all my other Win 7 machines run just fine on a wireless network. I might also add that when the apple tv and mac mini goes down, my ipad 2 goes down too. Of course, air play doesn't work . It comes and goes.
I have a 2nd Apple TV 2 and hooked that up to the same tv with the same results. I have called Apple many times. They are helpful but not been able to solve my problem. The cable provider and I have traced down to a conflict between the Apple TV, Mac Mini and the IPAD 2 .
Does anyone have any ideas what may be wrong?

I have had multiple ATV's, desktops, laptops, and i Devices all running at the same time without a problem. Typically on a network when you start 2 devices and the connection crashes it is an IP problem. Check the IP address on both devices and see. It is usually easiest to have the router assign IPs automatically using DHCP. The router, computers, and ATVs should also be set to DHCP.
If everything is set to DHCP try disabling DHCP and assign fixed IPs to each device.

Difficulty connecting Mac Mini and Windows Vista laptop

I have a Windows Vista laptop. I have been connecting to the Internet via a wireless DSL router. I just purchased a Mac Mini and want to hardwire the Mac Mini to the router and also create a home newtork where the Mac Mini can transfer files to and from the Vista laptop and vice versa.
What is the best way to do this? Could you please provide detailed information as well? I don't have a lot of experience with computers or networking.
Thank you!

Hi Bruce!
What you're wanting to do is very possible and is done often. However, please search Apple's website or Google first or search this forum for answers to your question. They've been asked and answered multiple times.
If you have problems with some of the steps then definitely post back and folks in this forum will be glad to help you get over those hurdles. We're users just like you but our time and efforts aren't unlimited.
For starters, I'll point you to these excellent pages by iFelix <http://www.ifelix.co.uk/tech/windowsxp.html>.
Good luck!
bill

I want my Mac book to synchronise with my Mac mini, and visa versa, so that I can work on either computer knowing that everything i do will be accessible from either computer - do i need to buy os x server to do this or is there a different way?

I want to know that if I create a document on my macbook it will be available on my mac mini and visa versa, is there an easy way of making two computers synchronise.
Currently my older mac book contains loads of old documents that I transferred to my mac mini via the apple migration software when I bought my mac mini but unless I always create documents on my mac mini I start to work between computers that makes it very confusing and difficult to manage.
Thanks

Turn on file sharing. If they are both on your wifi network you can share via wifi. Or set up an ethernet connection between the two machines.
Mac Basics: File Sharing - Apple Support
Hope this helps.
PJRS

Help.   New Mac Mini, migration, networking

Hi All,
I had a 2009 Mac Mini that was networked over wifi with my three other computers. I just purchased a new 2011 Mac Mini to replace it.
I hooked the new mac mini up to a TV and it said it could not run setup assistant while connected to this TV so it automatically created a user called "administrator".
I then took it to the Genius bar.   I wanted to get this user called "administrator" deleted and to migrate my own user (called MacMiniAnna).   They did migrate my user information using migration assistant and they did delete the user called administrator however...
When I try to network to the new Mac Mini it is still called "administrator's Mac Mini"   I want it to be named "Anna's Mac Mini"
And even though I went to the Mac Mini and turn file sharing ON for my entire home folder and said that everyone could read and write, I am not able to network to this computer from the other computers.
You can see what the problem looks like here:
http://kuperberg.com/clients/NetworkProblem.png

I feel that I can fix this whole thing if I can get the mac mini back to the state it was when I opened the box.   And then start all over, migrate my old data without creating this "administrator" account first.     Does anyone know how to just get the Mac Mini back to the original out of the box state?

The Battle between Mac Mini and windows machines

Ok i have a strange problem. I have a Mac Mini and it likes to fight with windows machines on the same network resulting in a loss in internet connectivity. Ok so here is the info the mini and the windows are on the same network the windows is wireless the mini is wired when both computers are on the internet for the whole network slows down. So i brought it to a friends house and hat it share his wireless connection same problem different windows machine except the internet connection stopped completely. With an all macintosh network nothing bad happens to the network.
Solutions anyone?

If your Mac Mini is wired you can easily turn 'Airport' (the built in wireless) off. By clicking on the icon next to the speaker icon in the top right haand corner and clicking Airport off.

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac mini and networking

Similar Messages

Maybe you are looking for