Mac mini and newertech ministack v3 question

I'm going to use the ministack drive as a boot drive. I'm looking for a large drive for the ministack, can you install a SATA/300 drive in the SATA/150 ministack and use it as a boor drive? Any recommendations on a drive?
Thanks

For bootable copies of your Minis HD and other backups, you need CarbonCopyCloner (donationware) :
http://www.apple.com/downloads/macosx/systemdiskutilities/carboncopycloner.html
Or Deja Vu (shareware) :
http://www.apple.com/downloads/macosx/systemdiskutilities/dejavu.html
And if money is no object, the fabulously expensive Dantz Retrospect:
http://www.versiontracker.com/dyn/moreinfo/macosx/13108

Similar Messages

Thinking of buying a mac mini and had a few questions. D:

I went to Best Buy a while ago, waited about an hour for help and I couldn't get anyone to help me.
haha so anyway, I want to get a mac mini. A reason is because I've never used an operating system other than windows, and all windows-based pcs that I've had start slowing down after a month; even with an anti virus program. So hopefully I won't have that problem with a different operating system.
One thing I wanted to do was to get a small 20-22 in LCD HDTV, would I be able to connect a mac mini onto one? Will it also play HD movies? The reason why I want to get a tv instead of a monitor is because I want to be able to connect a ps3 or xbox on it and play games every once in a while; unless maybe you can do the same with regular pc monitors. Would it be better to get a pc monitor instead? Which would you suggest?
Thanks lots. :]

The smallest full HD TV is going to be 32" although it's possible there might be one or two that are 26" in size. Anything smaller is going to be 720p and may support 1080i. The other option would be to get a monitor that size as they will more then likely support up to 1080p although as already mentioned bear in mind they may be difficult if at all possible to connect to a gaming console.
Having said that they may possibly come with one or two HDMI connections. Sound will be the other issue and you will have to sort out some sort of external sound option. lastly having full HD on anything smaller then a 32" is probably pointless unless you're sitting right up close to the display.
I currently have my late 2009 Mac Mini connected to a 32" full HD Sony TV via HDMI and it works great. I don't really use it for games though as I have a PS3, 360 and a Wii for that. The Mini goes through my Onkyo surround sound amp to my TV detects it as a 1080p TV. As it's going from mini display to DVI to HDMI I use a separate external JBL 2.1 sound system connected directly to the Mini for the sound. Apparently the Mini is capable of outputting digital surround sound but I've not looked into that yet.

Mac mini and Promise Pegasus Thunderbolt Question

I'm a semi-pro photographer and my wife is a graphic designer. I just bought a new mac mini with the Promise Pegasus 8 TB RAID drive. I know the mini HD is slow and the small so I want to use the RAID as a boot disk and to house my applications and files - effectively by-passing the weakest mac-mini link and as our primary music/media server o movies, music and photography. I've never used a RAID array before - usually individual multiple external hard drives. How do I go about using this RAID array for everything? Is it as simple as selecting this drive as the target or are there other hoops to jump through? I want to get as many answers as I can while everything is being shipped. I've had two HD crashes recently and I need the security of knowing all our data is safe...plus the additional speed and redundancy are very important.

Welcome to the Apple Support Communities
You can get the maximum resolution for the Thunderbolt Display (2560x1440) on both monitors, but the graphic performance may decrease

MAC Mini and Sony TV LCD question

In the past, when I connected to my Sony projector tv, unable to use the highest setting because lost part of the desktop with icons on bottom and entire top bar. New Sony LCD used and same thing happening. I am using a HDMI connection on the Apple. Wonder if this would happen if I switched to analog? Any other settings I can manually adjust to get the full screen and menu bars??

In the past, when I connected to my Sony projector tv, unable to use the highest setting because lost part of the desktop with icons on bottom and entire top bar. New Sony LCD used and same thing happening. I am using a HDMI connection on the Apple. Wonder if this would happen if I switched to analog? Any other settings I can manually adjust to get the full screen and menu bars??

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

2010 Mac Mini and HDMI question

Just bought a new Mac mini and have it hooked up to a Samsung px2370 HDMI to HDMI and as good as the picture looks I'm thinking it could look better ... And I've heard that generally a computer shouldn't be hooked up that way... The Mac mini has another mdp and the Samsung has dvi also, what are my options? All these adaptive have me stumped... Plus like I've heard On another thread the mini is thinking I have a television hooked up... Plus when the monitor was on 16/9 the menu bar was not visible and I changed it to screenfit on the monitor which worked but should I of kept it on 16/9 and adjusted it with underscan? Plz help

It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

Mac Mini and my TV

I was entertaining the idea of purchasing a Mac Mini and hooking it up to my TV. I have all the ports (HDMI) necesarry for this style of configuration. My only question is resolution. What should I be looking for with regards to resolution so that if I do hook up my Mac Mini to the TV, I get a clear picture...

Hi Scorogers
I am thinking about going down the same line wanting to upgrade the resolution from my ATV2.
The Panasonic TV's HD resolution is 1920X1080. The Mac Mini on HDMI will output 1920X1200 and on Thunderbolt even higher so I do not see any reason for not getting a great picture. Hopefully someone on here has it setup and could just confirm the same..........

Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

How is the Mini coonected to the momitor?
Does the power button n the mini not work?

Mac Mini and USB 2.0 hubs (hubs stop working within a month)

I have an aluminum Mini running OSX 10.6.6 (Snow Leopard). With only 4 USB ports, I have need of a USB hub to accommodate my external drives and other peripherals: keyboard/mouse, camera and iPhone have to use the existing ports in the Mini (difficult access to ports due to space limitations), leaving one port for up to 4 external drives (older drives 40-60gb used for backup and extra storage).
I have problems using powered USB 2.0 hubs with this computer; I have 'burned out' 2 hubs since buying the Mini in February. They just flat out stop working, though they still show power (the power indicator light on the hubs); no peripheral is recognized when plugged into the hub (which worked fine for about a month). I can unplug the 'must use Mini ports' (camera, iPhone, charger, etc) and the peripheral drives are recognized and work normally when plugged directly into the Mini ports.
One hub was a Belkin 4-port hub (about 1 year old) and the other was a GE 3-port hub with several flash card readers (19-in-1 card reader), also about a year old. Is there any reasonable explanation why powered hubs would suddenly stop working, related to use with the Mac Mini 2010 aluminum version?
I had worse problems with the USB ports in an old (~2006) Mac Mini (out of warranty), where the USB ports in the Mini stopped working, which is partly why I bought the new mini. In light of this tidbit, (be honest, please) are there known issues with Mac Minis and USB?

Each of the external drives has its own power supply; I generally only use one drive at any one time, but on rare occasions I have powered up more than one to confirm or transfer files. I don't leave any of those drives on when not in use, and when everything is working I properly eject/unmount them before turning them off.
There have been times when I powered up a drive connected to a powered hub and both the hub and the drive indicated activity but the drive didn't mount. On those occasions the drives sometimes would not appear in Disk Utility, and other times would appear, but would not be "mountable". I didn't know what the best way to deal with that was, so I would just turn the drive off, hoping the lack of mounting on the desktop meant no real drive activity was occurring and I wouldn't risk data loss or drive damage. So far all the drives seem to work fine when plugged directly into the back of the mini.
The main external hard drive I was using when the Belkin hub failed (iomega 40g) is USB 2.0 only (no firewire). I have another drive that is only firewire (la cie 60g)... so it wasn't a factor. Two other external drives are ACOM, one 40g one 120g, and then there's my old iMac G5 disk (display fizzled and everything but the disk recycled through Apple's recycling program) which is mounted in an external enclosure and is part of the USB contingent, but is not being used for anything but backup (all three both USB 2 and FW400 capable). (I know, too many toys... but why throw them out?)
The USB hubs both had their own power supplies, too, and I never used them without power (though I tried it as part of troubleshooting, before reading the Apple article on USB and power requirements). Other USB devices that only work when plugged into the mac directly are my Epson Stylus CX4800 all-in-one, and my Radio Shark.
So, whaddya think? Should I risk buying another powered USB hub or just live with plugging in peripherals to one available USB port (through a short USB 2.0 extension) and only use one at a time? That would be a bit of a pain, but if there are no issues you've heard of with Mac USB ports (several unanswered questions in the Mini Support forums here involving USB and peripherals, I noticed), what else would explain the seemingly short lives of USB hubs?
Oh, here's something I just remembered: the last time the Belkin hub was working (last night), I had my Radtech BT mouse charger cable plugged in (not charging, mouse not attached) along with two of the external hard drives, and my Fuji camera USB cable. I got an error message onscreen (on the Mini) that a drive had been improperly ejected (or put away?), yet the hard drive in question was still mounted on the desktop. I looked at the hub, and the loose ends of the charger and the camera USB cable were touching. Could that have caused the error (and maybe the hub to fail)? (Edit: the camera cable I think was plugged into the mini's one available port; 3 external drives and the mouse charger were plugged into the hub, _but only one drive powered up and in use (3rd edit)_. The camera end of its USB cable contacted the mini-plug end of the mouse charger... could that have short-circuited the hub? +That wouldn't explain the failure of the GE hub a couple weeks before... but I don't know if any of this is connected, so to speak--2nd edit.+)
Message was edited by: blick
Message was edited by: blick
Message was edited by: blick

Updated iMovie on my brand new mac mini and lost "SPEED" function.

Updated iMovie on my brand new Mac Mini and lost "SPEED" function.

Hello bbryson68, I'm sure you've just over-looked it.
The answer is to click on Adjust above the Clip in Viewer, this will bring into view a adjustments bar also above the Clip.
Now you just have to select the speed via the Turtle icon. Once the clip has been speed-up or down, you'll get a Slider
over the clip in question & a Rabbit icon indicating the clip has been speed-up.
If you want to keep audio undistorted check the Preserve Pitch checkbox above the viewer.
The Clip Slider & icon of Rabbit appear in the Clip-Trimer window below the main Clip, also check your Pref's to see if you have
Apply Slow Motion checked? This will slow or speed up all other clips to the first clip.

Front Row - Mac Mini - and PowerBook G4, Mac-Mini Multi Media centre.

I will be purchasing a HDTV is the near future and would like to buy a Mac Mini to complement it. ( then sell my DVD player )
The big question are:
-Can I ( using Front Row ) stream AVI data (film) from my PB G4 to my Mac-Mini and watch the content on my new HDTV. ( over AirPort )
-Do I need to buy a new PB that also has Front Row ? ( I hope not )
-What type of video data can I stream ? (iTunes and iPhoto I already know about)
-What about HD DVD's when they come out. Is the drive in the Mac-Mini HD DVD compatible ?( I don't think so )
Please - If you have any other relevant points or question's about the Mac-Mini usage as a multi media centre, Post them here.
15" PB G4 SD 1.5 GHz Mac OS X (10.4.5)

I just tried a AVI film and it work's with QT,
although a mpg film did not.
Now that I think about it, I tried a mpg plug-in for
QT and was disappointed.
Has anyone had any success with such a plug-in ?
Another Question:
Must then this AVI data reside in iTunes for
Front-Row to "see" it ? How does this work ?
I guess that when a Blue-Ray drive is added to Apple
products that a HD DVD will not play, or will it play
it but only burn Blue-Ray ?
When shopping for a HDTV I asked about the difference
in Blue-Ray and HD and he told me that the TV will
play both versions.
I hope that the drive will also play both, although
the way I know Apple it will be Blue-Ray only. (
at-least in the beginning ) Remember DVD-R
i would not worry about the blu-ray - HD-DVD thing right now. too much still in the air. once they realize consumers are too un-techie to figure it out and just continue to buy DVD's their will be a standard plus their is already other formats being developed. then if you talking about movies and such my guess is downloaded content is the way apple will go with an itunes movie store but thats my guess.
but yes, HDTV's will play either, its the player. I have a 61" samsung 720p DLP and my new mac mini looks good on it at 1280x720. front row is great. I also watched a ton of HD trailers from quicktime's website and they were amazing.
and from what i have seen from front row it only shows content that is in itunes or iphoto not random folders but i could be wrong, still palying around with it.

Is it possible to run dual display monitors on a KVM switch between my mac mini and a PC desktop?

I have two 23" monitors utilizing DVI that I currently have plugged into my PC desktop. I'd like to purchase the mac mini and utilize the same monitors for both systems and switch back and forth between the two. So, I'm wondering if it's possible. The only two hangups I can anticipate is dual display capability on the mini (I expect that some adapter will be necessary), keyboard compatibility between the two systems, and finding a switch that will handle all the above. Any help would be greatly appreciated!!!!

I think this video could help you
http://www.youtube.com/watch?v=IYoC2teAbmE
Other question is the switch box, You will have eight income cables (4 video, 4 usb) and four output cables
http://www.showmecables.com/viewItem.asp?idProduct=10778
http://www.networktechinc.com/pdf/cat-kvmsplit-usb-hdmi.pdf

Bought MA607LL/A Intel 1.66 2006 mac mini ubuntu pre install have question

Hey guys. I bought this model and comes with usb pre installed to drive. Doesn't have OSX. My question is I have a net book with 320gb and that is esata so I'm going to install in the mac. Now can I put the 60 gb hard drive that came with mac mini into a usb enclosure and when i feel like go into well i think need to push option? Go through that then boot up the external drive that has ubuntu when i feel like using ubuntu? I run ubuntu on main computer and so would like to use mac os on mac mini and ubuntu. Ty

Hello,
Yes, normally holding alt key or option key will show your boot choices, but some Linux distros need a boot manager installed.

Difficulty connecting Mac Mini and Windows Vista laptop

I have a Windows Vista laptop. I have been connecting to the Internet via a wireless DSL router. I just purchased a Mac Mini and want to hardwire the Mac Mini to the router and also create a home newtork where the Mac Mini can transfer files to and from the Vista laptop and vice versa.
What is the best way to do this? Could you please provide detailed information as well? I don't have a lot of experience with computers or networking.
Thank you!

Hi Bruce!
What you're wanting to do is very possible and is done often. However, please search Apple's website or Google first or search this forum for answers to your question. They've been asked and answered multiple times.
If you have problems with some of the steps then definitely post back and folks in this forum will be glad to help you get over those hurdles. We're users just like you but our time and efforts aren't unlimited.
For starters, I'll point you to these excellent pages by iFelix <http://www.ifelix.co.uk/tech/windowsxp.html>.
Good luck!
bill

Mac min and i movie

When i launch i movie it says my mac mini does not contain an quartz extreme compatible graphics card & quartz extreme is not working in i movie. Any suggestions of the source of the problem and how to fix would be appeciated..thanks..

Its nice that this problem was solved, but it would be even nicer if we knew what solved it.
I am looking at either a Mac Mini (2g/2g) or the iMac 2.4g/24", and have been perusing the Mini forums for info on how well the Mini runs iMovie, or even FCE. I have used FCP 3.0 for years on my G4 / 900 m, but don't need the power of FCP (or the hefty upgrade price).
I took a look at iMovie 06 an iDVD 06, and find they will pretty much suit my current needs. I am mostly just moving (and editing) old VHS home video to DVD. However, iMovie bogged down quite a bit on my tired old G4 after some extensive editing that required lots of sound track work. While this isn't normal in the simple VHS-DV conversion process, I figure I might as well get a newer, faster, system to allow for it.
Many comments on the Mini address "great for everything but 3D graphics gaming" This is perfectly fine, but I noted a warning about "quartz extreme" regarding FCE, so am interested in the same problem with iMovie.
The real question I am asking, tho, is whether iMovie or FCE editing is as the upper edge of chanllenge for the Mac Mini, and I should go for the iMac, or is the editing just a middle-of-the-road challenge for the Mac Mini.
I am intrigued with saving hte $1000 on the iMac by reusing my Monitor, Keyboard and Mouse, bu tnot at the risk of finding that the Mac Mini only "almost" does the job.
Thanks

Mac mini and newertech ministack v3 question

Similar Messages

Maybe you are looking for