Mac mini and old iBook

My dad (aged 84) has got used to using an old iBook. Recently, it started quitting any time he went on line. An Apple certified store said it is too old to fix. Could we connect a new Mac mini to the iBook, getting around the problem while keeping the same interface for him?

Still not sure which iBook, but...
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/

Similar Messages

  • I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

    I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

    I suspect the monitor has an ADC connector
    http://en.wikipedia.org/wiki/Apple_Display_Connector
    If so you need one of these:
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
    Otherwise what connector is on the monitor?

  • I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions? Thanks

    I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?

    What do you mean by "HD to VGA adapter converter"?
    Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
    Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
    In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
    You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
    http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
    Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work

  • I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    1. Remove the drives, install them in external enclosures.
    2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

  • Decided to upgrade from an old PowerBook G4, mostly for eyesight issues. Bought a new Mac Mini and hooked it up to an Apple A1267 Cinema Monitor. I cannot even figure out how to turn them on. Help please.

    I am exhausted just getting to the point of being allowed to ask my question.  I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now.  I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store.  Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt.  I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?

    How is the Mini coonected to the momitor?
    Does the power button n the mini not work?

  • I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

    Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.

  • HT2487 how do I clean my mac mini and get rid of old files and clutter please

    how do I clean my mac mini and get rid of old files and clutter lease

    Try using one of these applications to see what is taking up your hard drive space.
    File Scanner - OmniDiskSweeper  Requires 10.8 or better
    File Scanner – Whatsize

  • HT1719 I have music on my Shuffle and want to transfer it onto iTunes but when I go to Sync it, it warns me that all the music on my Shuffle will be deleted and replaced with what's on my iTunes. I have a new mac-mini and my old computer was an HP.

    Can anyone tell me how to tranfer the music that is on my Shuffle to iTunes? When I go to Sync it, it gives me a warning that all the music on my Shuffle will be deleted and replaced with what is on my iTunes. I recently changed computers from an HP to a Mac-Mini and did not transfer/sync the itunes prior to getting rid of my itunes. So the music I had on itunes does not appear in my library. Help please!

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Then proceed to do the Erase and Sync or restore the device.
    B-rock

  • Getting error "The disk you inserted was not readable by this computer." on mac mini and imac but it works on old macbook pro

    Please help! My hard drives work on all other computers except new imac and macmini.

    Both the mac mini and imac do not have cd drives. The trouble is why should I repair the external HDs when they work fine on other computers? I'm running OS X 10.8.4. I feel like its an OS X problem but I cant say. I will try the suggestion but I absolutely cannot reformat these drives right now becuae it would be way too time consuming to recover all the files on them

  • Mac Mini and DVI to ADC adapter

    I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • FINALLY! Mac mini to old Sony WEGA tv success!

    After having tried several different setups I finally got it working.
    My late 2009 Mac mini is now hooked up to my old 27” Sony WEGA Trinitron TV.
    They magic/missing link was the “VGA to RCA/ S-Video/VGA Converter” from MonoPrice ($27.51).
    I used a mini display port to VGA adapter ($13.47, but can get them cheaper) from my Mac mini to the converter and then from the converter to the tv using a standard composite (yellow RCA) cable. Then another cable from the Mac mini audio port to the red/white ports on the tv. Started up the Mac mini and all was good...almost.
    The resolution on the tv just isn’t good for text, and it’s often difficult to read, but the main reason I’m using the setup is video. Hulu, YouTube, TWIT live, etc. All of these have picture quality equal to that of the tv hooked up to cable tv. I tried changing the Mac minis display resolution, but found the default setting of 1024 x 768 works best for video. I have a 2.66 GHz Intel Core 2 Duo iMac in my office. I just turned on Internet Sharing on the iMac and turned on Airport on the mini to get the wireless internet connection. No Base Station/Router needed. I have a bluetooth mouse, and an Apple wireless keyboard. I can now sit back on the sofa and enjoy!
    This isn’t a permanent solution, but until I can upgrade the tv, it will do just fine.

    Terry Jackson1 wrote:
    where did you get the:
    James Press1 wrote:
    I used a mini display port to VGA adapter ($13.47,
    is it apple branded or an off brand?
    I bought it through amazon. NOT Apple branded. The seller was Global Source. There are other sellers on amazon that are less expensive, and some that are more expensive. I’ve heard of people having problems with some cables, so I didn’t want to go with the cheapest one, and settled on a mid priced cable.

  • New mac mini and can't access some websites

    Just upgraded to the new mac mini and am having trouble with loading some sites on safari, primarily social networking sites. Also hangs up on other pages when loading (trying to load google now etc). We have not tranferred anything from the old mini onto the new one yet so not sure what the problem is. Suggestions??

    First try > OS X: Updating your software
    then > Adobe - Install Adobe Flash Player

  • Mid-2007 Mac mini and HDMI issues

    I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
    However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
    The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
    The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
    Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
    Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
    Super frustrating problem.

    Opperman,
    I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor.  I tested it using the DVI cable with HDMI adaptor, and there was no sound.
    I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
    The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
    Cheers.
    Message was edited by: Numenorean

  • My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

    What model is your TC? What is the firmware?
    I recommend you do a factory reset and use short names.. not apple recommended names.
    Short.. 2-20 characters .. less than 10 even better.
    No spaces.
    Pure alphanumeric.
    Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
    That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

  • Have music files from a windows PC and put them on a usb drive. how do I transfer them to the mac mini and iTunes?

    Bought a mac mini and have music files from my old windows PC on a USB drive. need to know how to transfer all the music from the USB drive to itunes so I can sync them with my new ipod.

    Choose Computer from the Finder's Go menu, double-click the icon for that drive, locate the song files, drag them to any location inside the Home entry, open iTunes, and drag them from there into it.
    (92208)

Maybe you are looking for

  • Having trouble with JCheckBox and JTree

    I am trying to render the JTree to display JCheckBox's instead of just ordinary JLabels. It's fine, compiles, and when you view it it looks normal, until you try to check one. You can't check it at all. What am i doing wrong with this? Thanks

  • DV6 3019 TU FAN

    I have a HP Pavillion Dv6-3019TU laptop. OS is Windows 7. There was a problem with heating and fan noise from the purchase dare. I went to the HP Service Centre, but the problem didnt solve. Before a week ago the fan gone crazy, it started making noi

  • Question about lost linked files

    I have an illustrator PDF with a linked photoshop PDF as the background, but have lost the linked file on my HD. The background image still appears when I open the illustrator PDF in acrobat and photoshop, but not in illustrator because it cannot fin

  • Error during build

    Hello I am new in premier pro cs4 sdk. I give the following error when build the  SDK_Custom_Importpipl &  SDK_Custom_Import.cpp Error    3    error LNK1104: cannot open file 'C:\Program Files\Adobe\Adobe Premiere Pro CS4\Plug-ins\Common\\CustomImpor

  • How to register a resource in a grid (cluster)???

    I want register a resource "specifically ASM" in a grid (cluster)....what is the comand? Look: srvctl stop asm -n Node1 PRCR-1001 : Resource ora.asm does not exist Regards and thanksss Edited by: user10404821 on 09-mar-2010 0:46