Mac mini and Sharp Aquos

I am planning to buy a mac mini. What do I need to connect it to my Sharp Aquos 32 inch? Anything I need to be aware of when setting up the connection? Thank you

Your primary concern is choosing the type of connection to use for your TV. If you are using a separate audio tuner or surround sound, you can use the included adapter that provides a full sized DVI port. You can then use a DVI to HDMI cable to get the video to your TV. If you wish to send both video and audio to your TV, particularly via HDMI, you can use an adapter like the one sold by Kanex:
http://kanexlive.com/products/item-id-3495.html
Once you've made that connection, you will probably have to use a scan setting on the TV to allow the desktop to properly fill the screen. If you can provide the exact model number of your TV, I might be able to find the manual online and give you an idea which setting may be most effective.

Similar Messages

  • Help mac mini and sharp aquos 32 through DVI

    I am a newbie, been looking through this discussion to find out if there were any previous threat to my problem. I did not find any. So, I was trying to connect mac mini with my LCD using DVI, nothing showed up. I change it with S with the converter that i purcase for mini, the pic showed up but looked terrible. I want to be able to use the DVI. Help!!!

    Perhaps try here:
    http://www.avsforum.com/avs-vb/showthread.php?threadid=500389

  • Current Mac Mini and HD decoding

    Hi there,
    I am considering buying a Mac Mini as an HTPC to connect via DVI->HDMI to an LCD TV. I was wondering if any of you has experience in playing HD content on a current generation Mac Mini and how does the Mini cope with it. Please note that I am not talking about BluRay since the drive only supports DVD, but rather .MOV, .MKV or .AVI videos encoded at 1080p using codecs like H.264 or similar. Can the Mini decode those without missing any frames on a 1920x1080 LCD TV?
    Thanks in advance!

    480p seems to be the minis domain with H.264
    The processor hits 100% in spots and can find a safe cushion of 9% free CPU from time to time. It seemed to lock on fine at 24fps constant, with the smallest of climbs to 24.57fps on the BBC Motion Gallery Andes Film [848 x 480 resolution].
    Full screen locked on fine but I didn't have any fps readouts up. Only stuttered once for a short while, could have been the end of the download stream.
    Compression artifacting is still readily visible on this particular 480p encoding when viewed on the much sharper 2005FPW LCD monitor.
    This is why I primarily never saw the Front Row package ever being available for the current minis. Apple wants it to be a centrepiece for H.264 which the current graphics and cpu powered minis just aren't up for (H.264 pushes G5's and the fastest Intel CPUs to the wall as well when decoding.) Then again, a mini with all the extra hardware wouldn't be the mini I want. A low powered, silent beast that sips electricity and is perfect as a heavy web browser/email task oriented machine.
    --add a G5 and a faster GPU and you end up with an iMac which low and behold is what Front Row ships on
    Jan J.

  • Mac Mini and DVI to ADC adapter

    I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

    when you say "Mac flat screen LCD", do you mean this:
    http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
    if it is, you might wanna try this:
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • Mac Mini and thunderbolt/vga to LCD TV

    Hi All,
    Here is an interesting one......
    I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them.  The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
    The HDMI/DVI is not used.
    In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
    If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor.  If I then change cables without a reboot, the LCD TVs show correctly!
    I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary.  However, on reboot it's as if the details are all forgotten!
    Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs.  That said, I wanted to put my environment out there and see if anyone had an ideas.
    Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
    Thanks for ANY ideas!!!!

    Hey Spost!
    You have explained exactly what happened to me last night.  I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week.   I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.  
    Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet"  airplaying prior to the move worked great ... then last night 4:3 Green Screen. 
    My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out.   Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac. 
    Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run. 

  • I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161.  Any ideas?

    The latest Apple driver support begins with the MP 171.
    Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
    Hopefully, this will solve your device issues.

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • I have a new Mac Mini and a 7 year old Mac monitor. The connectors don't match. What to do?

    I have a new Mac Mini and a 7 year old Mac monitor. The connectors dont match. What to do?

    I suspect the monitor has an ADC connector
    http://en.wikipedia.org/wiki/Apple_Display_Connector
    If so you need one of these:
    http://www.amazon.com/Apple-DVI-ADC-Display-Adapter/dp/B00011KHT2/ref=cm_cr_pr_p roduct_top
    Otherwise what connector is on the monitor?

  • Just got a new mac mini and I can't figure out how to authorize it. Help!

    Just got a new mac mini and cannot figure out how to authorize it.  Help!
    m

    Link your phone number and Apple ID for use with FaceTime and iMessage

  • I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow.

    I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?

    Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
    OS X Mountain Lion: Burn a CD or DVD may help.

  • Connecting new mac mini and a pc to internet

    I have ordered a new mac mini and airport express to connect it to my broadband connection. I have a none wireless pc already connected to the DSL. This is a usb connection to the pc.
    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port? Will this work and would the Mac then pick up the connected printer?

    Can I connect the dsl to the airport express usb port and then connect my pc to the free ethernet port?
    No, this will not work. To use an AirPort Express (or AirPort Extreme) base station, you will need a DSL modem that has an Ethernet port. The reason is that the USB connection requires a software driver to be installed on your computer. Since it's not possible to install drivers (Mac OS, Windows or otherwise) on the AirPort Express because it's not a computer, you'll need to use the Ethernet port. I would recommend you visit the AirPort Express forum. There are some knowledgeable people there who can help you find a new modem that has Ethernet and get everything configured for you.
    -Doug

  • Mac Mini and my TV

    I was entertaining the idea of purchasing a Mac Mini and hooking it up to my TV.  I have all the ports (HDMI) necesarry for this style of configuration.  My only question is resolution.  What should I be looking for with regards to resolution so that if I do hook up my Mac Mini to the TV, I get a clear picture...

    Hi Scorogers
    I am thinking about going down the same line wanting to upgrade the resolution from my ATV2.
    The Panasonic TV's HD resolution is 1920X1080. The Mac Mini on HDMI will output 1920X1200 and on Thunderbolt even higher so I do not see any reason for not getting a great picture. Hopefully someone on here has it setup and could just confirm the same..........

  • Mac Mini and LCD TV, changed resolution and now cannot use the screen anymo

    hello,
    I have a Mac Mini and and LCD TV which is connected via HDMI cable. I was playing around with the resolution settings (not very smart in hindsight) and managed to select a resolution that my TV does not support. I do not have another monitor or Macbook. Is there anything I can do to reset the resolution settings? I tried to reset the PRAM, but that didnt seem to solve the problem. I also tried starting in Safe mode but that didnt do the trick either.
    Appreciate your help!

    Arie, it may be possible to get to System Preferences via the keyboard. But you have to be sure the Finder is the foreground application. Is your Mac set to boot straight into your account or does it pause waiting for a password? If it boots straight into a user account, you can try the following procedure:
    \- Restart the Mac (It should be hooked up to the misbehaving display in case that's not clear)
    \- When it is done booting, type Cmd-Tab and then Cmd-Q. Do this several times. (Cmd-tab will step the Mac through all the programs that might be running. Cmd-Q quits them. Doing this several times ensures that only the Finder is running since the Finder can't be quit. This is important for the next step)
    \- Type Shift-Cmd-a (This should open the Applications folder)
    \- Type "sys" quickly (System Preferences within the Applications folder should now be highlighted)
    \- Type Cmd-o (This should open System Preferences)
    \- Type out the word "screen settings" completely (This should cause Displays to be highlighted in the System Preferences main panel)
    \- Hit the Return key (This should open Display Preferences)
    \- Hit the Return key again (This will clear any alert box that may have popped up)
    \- Hit the Tab key once (This will shift the keyboard focus to the resolutions list)
    \- Now start using the up (or down) arrow on the keyboard one press at a time. Each press of the arrow key moves to the next resolution in the list. Wait at least five seconds between arrow key presses for the resolution change to take effect. Hopefully, at some point, the monitor will light up with a stable image and you are back in business.

  • Mac mini and Philips tv

    hello. I bought the mac mini and philips tv, but I get pink screen. looking at various forums that this is a known issue between apple and philips.is there  no solutions to this problem?

    Hi, what all inputs does the Phillips have, & how is it conected now?

Maybe you are looking for