Mac Mini and Vizio 42" HDTV Model SV420M

I’m going to be canceling my cable tv, and just going with cable internet.
I’m going to be getting a Mac Mini to hook up to a tv and am considering the Vizio 42” Class 1080p HDTV, Model #SV 420M. I’ve looked at this tv at our local Walmart. The picture quality looks good, plus it has 4 built-in speakers. Anyone have a similar setup?
WalMart and Sears are the only options to purchase a tv locally, and the Vizio models look good for the price.

The mini ships with a mini-DVI to DVI (D) adapter. I use that plus a Belkin DVI (D) to HDMI cable. But I have to run a separate analog cable (you can use digital if your TV has a digital port) from the mini's audio port to an audio port on my TV. I have to configure the TV to know to associate the two ports, HDMI + audio to get the whole package. Some TV's are easier to use that way than others.
The little more expensive route, but what I intend to switch to using, is to get this device from Monoprice and combine the video and audio signals. Then you can run a single HDMI to HDMI cable from the converter to the TV for full digital audio and video in an HDMI signal. The device has Toslink and mini-DisplayPort cables for the digital audio and video, and a USB cable to power the device.

Similar Messages

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

Mac Mini and Samsung 43" DLP HDTV gets Black Screen Only

Just bought a new Mac Mini with great anticipation for some large screen viewing.
After numerous attempts the Mini has yet to produce anything but a black image with the occasional red or white horizontal line on my 43" Samsung DLP TV. Not even a brief grey start up screen. Just permanently black.
Here's the kicker: I do get a great computer screen image on this 43" DLP TV in Mac OS 8.6 off my ten year old Macintosh PowerPC. (The trouble is it's a noisy older computer and has no bluetooth for wireless mouse & keyboard: and no Front Row with remote control)
I have the VGA cable connected to the "computer in" port on the back of the Samsung DLP TV .
This is with the exact same cable and connection that refuses to work with the Mini.
Earlier attempts at using the DVI port were unsuccessful so for now I am staying with what works on the older Mac.
Some other things I've tried:
-with my Mini hooked up to a 17" CRT Samsung monitor I have tried all available resolution settings at 60 Hz, reconnecting to my large screen Samsung each time, producing nothing but the black screen.
I've tried turning the TV on before the Mini and vice versa
I always check to make sure the PC connection is selected on the TV
As well, I have re-installed the OS onto the Mini to eliminate any possibility of a sofware conflict from data transferred from my Emac
After consulting an Apple technical page (article 303406) regarding Black Screen issues and Mac Mini on large screen HDTVs, I went into single user mode and changed some text as specified. That did't help either
So far I have never seen a grey startup screen at all, only a totally black screen.
Someone in a recent post here or on MacMini.com touched on impedence issues with signals into VGA or DVI ports. The Mac Mini operates on low voltage. Could there be some connection to how strong a signal it produces compared to my old PowerPC with its ATI graphics card?? And just why would that make a difference
I haven't seem my particular issue addressed in this forum or on MacMini.com
Thanks for any help
Mac Mini 1.83 Intel Core Duo 512 Mb Ram Mac OS X (10.4.7) Emac; 604e PPC with G3 Upgrade & ATI Video Card

Just finished testing the Mini remotely with the use of the Redstone software recommended by BSteely in a previous post. Fun Stuff.
I saw the Mini "desktop" on my Emac screen and could control it remotely, even though the mini was connected to the large screen Samsung.
But the "fix" did not progress from there. When I called Apple for further help they were not able to help me tweak my Mini. Apparently there was nothing to tweak.
A second level Apple technician finally told me (after a few calls to both Apple support and Samsung) that this Mac Mini is likely not capable of producing a screen image on my large screen Samsung.
He said the Mini supports "Coherent Displays up to 154 Megahertz and Non Coherent displays up to 135 Megahertz". On his recommendation I checked with Samsung (second tier) and they are not sure exactly what that means. Same here.
Samsung did reply that the "pixel clock (of this HDTV) is 74.2 Megahertz". Again, too technical for me.
The latest second tier Apple guy just told me said that my Samsung 43" DLP is probably not compatible with the output capability of my Mac Mini.
Bottom line
It's all about the output capabilities of the Mini's "Intel Extreme Graphics GMA
The Mini's video output is not upgradeable like the other mac which works with this HDTV.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

Mid-2007 Mac mini and HDMI issues

I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
Super frustrating problem.

Opperman,
I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor. I tested it using the DVI cable with HDMI adaptor, and there was no sound.
I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
Cheers.
Message was edited by: Numenorean

2010 Mac Mini and HDMI question

Just bought a new Mac mini and have it hooked up to a Samsung px2370 HDMI to HDMI and as good as the picture looks I'm thinking it could look better ... And I've heard that generally a computer shouldn't be hooked up that way... The Mac mini has another mdp and the Samsung has dvi also, what are my options? All these adaptive have me stumped... Plus like I've heard On another thread the mini is thinking I have a television hooked up... Plus when the monitor was on 16/9 the menu bar was not visible and I changed it to screenfit on the monitor which worked but should I of kept it on 16/9 and adjusted it with underscan? Plz help

It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

2010 Mac Mini and OSX Lion

Hi Everyone,
Hoping I can get some advice.
I have a 2010 Mac Mini and am thinking about upgrading to OSX Lion.
Although I know my Mac meets the system requirments (Intel Core 2 Duo, 2Gb RAM), I was wondering what the performace is like on with these specs.
I mainly use my Mac for iTunes, Safari, Twitter and iPhoto if that makes any difference.
Thanks!

It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

Bridging the gap between Mac Mini and iMac

Does anyone agree that Apple needs to add another model between the Mac Mini and the iMac? I think they need something like a Mac Mini Plus. Two models, one with the 1.83GHz Core Duo and one with the 2.0GHz Core Duo. The unit itself would be slightly larger than the standard Mini and include a PCI Express slot with several video card options and a faster (7200RPM) hard drive. Personally, I hesitate to buy an iMac because of the built in monitor. I would prefer to buy a separate LCD flat panel monitor that I could keep for years and use with different Mac models as I upgrade. As for the current Mac Mini, it's video and processor options are on the low end, albeit perfect for the casual user, but for someone that wants to do some gaming or video editing, they don't quite cut it.
Don't get me wrong here, I love the elegant design of the iMac, but I think Apple needs to offer something that allows us to have the iMac equivalent computing power without the built in monitor and without having spend a thousand more on a PowerMac.
Athlon XP 1800+ Windows XP Pro

Yes, I'd love something in the form of a Mac Mini that was closer in spec to the iMac.
Honestly, the only reason I won't buy an iMac CoreDuo is the built-in monitor.
And, the only reason I won't buy a new Mac Mini is that they are underpowered.
I have owned two iMac G5 systems, and both had serious faults with their built-in LCD panel.
The first would permanently etch in anything on the screen for every hour of intensive use.
It wouldn't etch it in in normal use. But, if I did any of my audio work, it would heat up the system so hot that the image on the screen would literally cook into the LCD panels plastic surface.
It literally looked like you took a razor blade, and precisely carved the exact image into the surface of the screen. Pretty nasty looking. Nothing would get rid of it, and it would happen every time I did my audio editing / processing work for an hour.
Naturally, the more work I did, the worse it got. I only got two editing sessions out of an LCD panel before having it replaced.
After going through that for a while, I sold the system after having a fresh panel installed under warranty.
I got tired of damaging the screen after every hour of work.
The second iMac G5 was purchased a year later. That one also suffered permanent damage to it's LCD panel. But, not quite as noticeable.
I know that there are a bunch of people getting ready to hit me with the "Image Persistence" explanation. But, trust me, I know about Image Persistence, and this wasn't it.
I was seeing actual permanent screen burn-in (which is not supposed to happen on LCD panels).
The service tech was absolutely amazed at the appearance of my screen. And, yes we verified it was the actual panel that was damaged. He wouldn't replace it without verifying that it was the panel itself.
Anyway, I called to arrange service on the second system again, and before I could get it in there, the backlight started flickering. And, I had already had tons of other stuff fixed on the machine. So, I sold it and bailed-out.
Now, after all the problems I've had with the built-in screens on the iMac G5 systems, I don't want another Apple product with a built-in screen. I want to use my own LCD panel.
I have an LCD panel that I'm using now. It's about 3 years old, and only cost me $200. And, it doesn't have even the slightest indication of image burn-in or image persistence. I use it every day, and use it just like I did the iMacs.
So, what I want now, is a machine comparable to the iMac CoreDuo, but without the built-in screen.
The current Mac Mini's cost way too much for their very low specifications.
I already have a Mac Mini G4. It's underpowered as well. But, no worse-off than the current Mac Minis.
Now, if Apple produced a Mac Mini with identical specs to the iMac, I'd gladly buy it.
Even better for them, I'd pay the same price as the current iMac to get it without the built-in monitor.
Yes, that's right, I'd pay the full price of the iMac to get a Mac Mini without a monitor if it was of the same specifications otherwise.
The current Mac Mini is obviously stripped-down to prevent competition with the iMac. But, I think they'd find that they would simply expand their user base if they offered a better Mini.
With their product line as it is, the current Mac Mini is not a compelling machine, and the iMac is not an option because of it's built-in monitor.
Get me a high-end Mac Mini and you've got a sale.

MAC mini and Photoshop CS6

Dear all,
I want to swich to MAC from my current Windows PC.
I'm thinking about to use a MAC mini because I have a good external display, so the iMAC is not necessary.
But I would like to know if the MAC mini is powerful for using Photoshop CS6 (image editing, no 3D).
Does someone has experience with a MAC mini and using Photoshop??
Thanks a lot in advance for your support!
Alecs

The mini uses Intel's integrated graphics rather than a discrete GPU which puts it at a small disadvantage compared to the iMacs. I'm not a graphics professional but I use Photoshop extensively in my work and use it on my MBA (which is a bit slower than today's minis and also uses Intel's integrated graphics) as much as my much faster iMac. Since loading and saving large PS files can be time consuming you might want to consider the Fusion model to get the benefit of SSD speeds.

I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.

Front Row - Mac Mini - and PowerBook G4, Mac-Mini Multi Media centre.

I will be purchasing a HDTV is the near future and would like to buy a Mac Mini to complement it. ( then sell my DVD player )
The big question are:
-Can I ( using Front Row ) stream AVI data (film) from my PB G4 to my Mac-Mini and watch the content on my new HDTV. ( over AirPort )
-Do I need to buy a new PB that also has Front Row ? ( I hope not )
-What type of video data can I stream ? (iTunes and iPhoto I already know about)
-What about HD DVD's when they come out. Is the drive in the Mac-Mini HD DVD compatible ?( I don't think so )
Please - If you have any other relevant points or question's about the Mac-Mini usage as a multi media centre, Post them here.
15" PB G4 SD 1.5 GHz Mac OS X (10.4.5)

I just tried a AVI film and it work's with QT,
although a mpg film did not.
Now that I think about it, I tried a mpg plug-in for
QT and was disappointed.
Has anyone had any success with such a plug-in ?
Another Question:
Must then this AVI data reside in iTunes for
Front-Row to "see" it ? How does this work ?
I guess that when a Blue-Ray drive is added to Apple
products that a HD DVD will not play, or will it play
it but only burn Blue-Ray ?
When shopping for a HDTV I asked about the difference
in Blue-Ray and HD and he told me that the TV will
play both versions.
I hope that the drive will also play both, although
the way I know Apple it will be Blue-Ray only. (
at-least in the beginning ) Remember DVD-R
i would not worry about the blu-ray - HD-DVD thing right now. too much still in the air. once they realize consumers are too un-techie to figure it out and just continue to buy DVD's their will be a standard plus their is already other formats being developed. then if you talking about movies and such my guess is downloaded content is the way apple will go with an itunes movie store but thats my guess.
but yes, HDTV's will play either, its the player. I have a 61" samsung 720p DLP and my new mac mini looks good on it at 1280x720. front row is great. I also watched a ton of HD trailers from quicktime's website and they were amazing.
and from what i have seen from front row it only shows content that is in itunes or iphoto not random folders but i could be wrong, still palying around with it.

Mac Mini and Final Cut Pro

Hi there, I wanted to see if anyone out here had a good or very bad experience working with FCP on the newest model Mac Mini, and more so, if it is possible to use the HDMI output on the Mac Mini as a video and audio out to a TV while working. Can ProRes 422 HQ or ProRes 444 when played in a sequence in FCP be seen on a TV connected to the HDMI port?
Many thanks

I disagree I am using FCP7 AND CS5 on my late 2009 mini. It doesnt have HDMI out but it functions with HD footage. My Sony Nex Vg10 shoots are cut with it, and I even have used CS5 with Red files without issues. The HDMI should work but I don't have that model and have never hooked it up for that reason.
Yes in an ideal world we would all have 12 cores with SSD, color grad monitors, and thunderbolts (that hook up to nothing as of today lol), etc. But for the rest of us in reality you have to work with budget you have and not every gig is destined for the silver screen. My Mini can get stuff done, even if its not portable like a MBP or multi cored like a Mac Pro. PS FCP7 only can use 1.5 cores anyway and like 3gb of ram since its 32bit the higher end machines are irrelevant right now (unless your using another NLE like CS or Avid). FCP X will be 64 bit and make more sense to run on higher ended machines.
So if you own the mini, and the HD tv and FCP, and all that is preventing you from trying this out is the adaptor, go grab it and test it out, just don't lose your receipt.... Its a lot easier to buy that adpaptor vs a new machine, and I am sure you will be fine. If you use FCP with a mini your probably already used to rendering anyway and as an editor sitting around rendering while getting paid can be ton$ of fun! i am going to miss that the most in the new version i think

Mac mini and duel monitors

I want to purchase a mac mini (2011 model), and have two Saumsung SyncMaster monitors that I want to hook up to it. What cords do I need to be able to run both of them through the mac mini?

Have a brand new Mac Mini and having trouble trying to hook them up, specifically to two
ViewSonic VX2250WM-LED monitors. Everyone I talk to says to get a DVI D splitter so that one DVI goes into adapter and the other two branch out to the monitors. This hasn't worked so far and every where else I read mentions tons of other ways of doing this. Since DVD D splitters are impossible to find, what else is there?

Macbook, mac mini, and pro tools

Can anyone tell me if it can be done and how to setup a macbook to view and control a mac mini and then use the two computers processors to beef up the processing power to run a pro tools digi 002 rack for recording? I think the digi 002 wants to only see one operating system, but can one computer "borrow" some ram and processor power to help with the pro tools recording needs? Thank you so much for your time.

thinking about maybe switching to a mini later this year depending on what the new ones offer when they're announced.....
If that's what you are planning, wait till they are announced to be in the channel to find out what the mileage is like. You never know what new compatibility issues might arise. Remember with each new release, no Mac can run an older Mac operating system than shipped with it. So any experience we give here today may be vastly different from what you might run into in the future.
Then if people's mileage is not what you want, and it is better on the old, get a refurbished model*:
http://www.macmaps.com/usedrefurbished.html
Note, most Mac Mini users are not running Pro Tools. If you want Pro Tools experience of today, it is better to ask in the Mac Mini forum. If you like, I can ask a moderator to move this thread.

Mac Mini and DVI to ADC adapter

I have an old Apple Cinema Display with an ADC port. I have the DVI to ADC adapter, which I have been using to connect to an old Power Mac which is on its last legs. I want to replace the Power Mac with a mac mini and connect it to the display from the HDMI-DVI cable (included) to the DVI-ADC adapter, and then connect on to the Display. The Apple sales representative (after laughing for a while, which I thought was fairly insensitive) said that I won't have audio with this setup, and I will have to get a whole new display. Is this true?

when you say "Mac flat screen LCD", do you mean this:
http://www.ares-woo.com/christmas2005/images/pc_cine.jpg
if it is, you might wanna try this:
http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

Mac Mini and Vizio 42" HDTV Model SV420M

Similar Messages

Maybe you are looking for