Mac mini audio output

Hi, i've seen this interesting program http://www.algoriddim.net/index.html
for djs.
These djs program usually use to way to work:
- dual sound card
- mutiple output on a single sound card
This program use the second approach.... but mac mini has only an output.
I remember that my last pc was able, using a tune program, to convert an audio input to an audio output to get 5.1 system.
I wonder to know if it is possible to convert the input to output with some kinda program, or is there any way to get working the pre-cue with a mini.

hello mini users with the "no audio output" problem
it seems that there are faulty output jacks in the macbook and the mac mini
there are two things you can try:
i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
macam installs a file called "macam.component"
if you have the same, do this - take that file out of:
(your hard drive)/library/quicktime - macam.component
and just put it on your desktop
restart, then in your sound pref's choose your audio output (if doesn't work restart again)
the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
it seems macam causes the problem, the two can not work at the same time.
the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
my mini does not have a red light on. i tried using a paperclip but it doesnt work.
hope this helps, beleive me i feel your pain!!!!
what good is a computer without sound?
extremely annoying problem that i hope apple looks into and fixes
-andrew

Similar Messages

  • Mac mini audio output problems

    This is similar to a problem that appeared before, but with a different twist.
    On 4 July all was well. On 5 July I switched on and there was no "chord" from the Mac. When I collected my mail - no sound from my speakers (which are part of my screen). Logged on to a couple of sites - no sound.
    The System Profiler, under the "Audio (Built In)" category, says: "No Built-in Audio." I know that's wrong because it's always worked before and when I plug my headset in it works fine.
    When I go to the Sound preferences panel in System Preferences, it finds the headset but if I unplug that it finds nothing.
    I tried running the hardware test (by putting in the OS X install disc and holding D during startup.) It couldn't find a problem.
    So, as far as I can see, audio output is fine for the USB headset output but not for the others. Is there a simple fix? The nearest Apple store is about 200 miles away and I don't fancy the idea of posting the Mac off.
    (And I think it's still under warranty for a couple more weeks.)
    Mac mini   Mac OS X (10.4.10)  

    hello mini users with the "no audio output" problem
    it seems that there are faulty output jacks in the macbook and the mac mini
    there are two things you can try:
    i tried everything and began thinking about what new software i had installed. it was "macam" which enables you to use older webcams on OSX. i needed that to use my webcam on skype.
    macam installs a file called "macam.component"
    if you have the same, do this - take that file out of:
    (your hard drive)/library/quicktime - macam.component
    and just put it on your desktop
    restart, then in your sound pref's choose your audio output (if doesn't work restart again)
    the first time i took it out, i had my sound back instantly, another time i had to choose audio output in sound prefs. you kind of have to try different things. after you get your sound back, you can put back "macam.component" to use your webcam.
    it seems macam causes the problem, the two can not work at the same time.
    the second thing: if you dont have "maccam" try plugging and unplugging output jack a few times and restarting until you have sound.
    the problem still could be with the OSX 10.4.10 update / quicktime...or maybe even a hardware problem like others with macbooks were saying (with the red light), not sure.
    people with macbooks and who have the red light on, say to use a paperclip to turn off the switch inside.
    my mini does not have a red light on. i tried using a paperclip but it doesnt work.
    hope this helps, beleive me i feel your pain!!!!
    what good is a computer without sound?
    extremely annoying problem that i hope apple looks into and fixes
    -andrew

  • Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output?

    Is there a way to connect the Apple TV as a second display without it automatically changing my Mac's audio output? I would prefer to use an audio interface for playback and the apple tv as a third display. I know I can go back to system preferences and swap my output back manually, but it is getting to be really inconvienient. Thoughts?

    Hi and welcome to Discussions,
    have a look at ScreenRecycler http://www.macupdate.com/info.php/id/22908/screenrecycler
    Regards
    Stefan

  • New Mac mini audio problem - beeping from audio output

    Hi Apple fans
    Please help me. I recently purchased a new Mac mini from my local store. It's three-and-a-half weeks old as of today.
    It's an i5 2.3 with 8 GB of corsair RAM.
    I like to watch movies and TV on it and have the audio connected to an external amp and speakers via the headphone output.
    After a reboot today I lost the sound through that output. All that I hear through it now is an electronic beeping, six notes, descending in pitch, repeating.
    I have no idea what it is, other than annoying since this happened on a brand new computer. Not looking forward to the idea of losing my mini for a week as Apple figure it out, but it may be all that's left to do.
    Maybe somebody here can help me out - anyone have an idea what's going on? I did an fsck -fy already, and there seems to be nothing wrong, based on that check. For completeness sake, I ran the sound over a USB sound card, and the beeping noise was not there, and sound worked fine. Ditto for the internal speaker - no weird noise there, this seems limited to the headphone out port. I've tried different cables, and even amps, and a set of small speakers without amp. The noise is there when using the headphone jack, and it's absent when using the wee internal speaker or USB-based sound. Please help?
    I captured the sound on a video which I've uploaded. It's kind of jarring, so keep your hand on the volume button.
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    Thanks much for any input - it would be very much appreciated.
    Pascal

    Hi Pascal,
    Certainly strange, but I have no ideas other than having it looked at by Apple.

  • Mac Mini Audio Intermittent over HDMI, Cuts out with Assertion in kernel.log

    Hello. I've been having trouble with a mac mini (Mid 2011) that I bought on Thursday. It's running OSX 10.7. The Mac Mini is the $599 unit.
    I've got it hooked up to my Sony BRAVIA HDTV (also this year's model) via HDMI, with audio configured to be delivered via HDMI to the TV alongside video. Initially the audio will play through my TV, but after an hour or two of watching something, it will cut out, and there will be no more sound coming out of the TV from the mac. Ultimately, the only way I can fix it is to reboot the Mac Mini. I've also observed that at about the same time sound cuts out, the following error message appears in kernel.log:
    Aug 12 19:21:40 joshs-Mac-mini kernel[0]: Sound assertion "0 != result" failed in AppleHDAWidget at line 3957 goto handler
    Aug 12 19:22:10 --- last message repeated 5 times
    As far as I know, assertions failures usually mean software problems (bugs). I suspect I may be encountering a kernel-level bug in Lion, as this error message is showing in kernel.log.
    The following is a list of diagnostic steps I've taken:
    - I've double-checked the sound output device in preferences. It didn't spontaneously change from SONY TV (HDMI) after sound cut out.
    - I've tried changing output to the internal speakers. It plays sound from the mac mini (as expected). When I change it back to HDMI, still no sound from the TV.
    - I've tried turning off and back on the tv. No effect.
    - I've tried unplugging and replugging the HDMI cable. No effect.
    - I've tried replacing the HDMI cable with two other alternates. No effect.
    - I've tried other HDMI inputs for my TV with HDMI attached. No effect.
    - Note: I've got a ps3 and xbox360 on the TV that has successfully used the HDMI inputs and cables tested on. They've never had this type of problem, so I don't think there's a problem with the TV.
    - I've tried rebooting the mac and resetting the "PRAM" (Command-Option-P-R before the grey screen on bootup). Sound still cuts out after a while.
    - All updates are applied.
    Does anybody else have any ideas about what I could try to fix this? This problem is pretty much a deal breaker, as rebooting the mac mini mid-movie kind of destroys the movie-watching experience.
    Thanks

    I'd just like to jump in on this thread to report exactly the same problem. 
    2011 Mac Mini (the 2.5GHz i5 model) running Lion, Sony Bravia TV, HDMI sounds cuts out after a while with the console error "Aug 15 18:30:25 Mini kernel[0]: Sound assertion "0 != result" failed in AppleHDAWidget at line 3957 goto handler".
    Interestingly, after the error occurs, I can still get 5.1 sound through Plex, but not through Quicktime. 2.0 sound and system sounds all fail until I reboot the system.
    Any help would be appreciated. I would prefer not to have to return the Mini.
    Thanks.

  • Mac Mini audio weak

    My spouse got a new Mac Mini 1.83GHz currently with OS 10.5.4. The migration process from her old PowerBook went fine. The only problem is the audio is weak. With all sound controls at their loudest and the Sound preferences Output Volume at its max, the sound is low to medium whether in Safari or iTunes. On my iMac it would be screaming if had that setting. I don't expect good sound quality out of the Mini but I would expect enough loudness. Also, the ViewSonic monitor being used has the same issue when plugging the sound cable into the Mini sound jack.

    Wayne my response may not be relevant to your issue but let me share my experience.
    I have a Mini 2.0 on a Bravia connected to a 5.1 AV system. The only way I got the thing to blast. Even Harman Kardon Soundsticks were unsatisfactory, hence the 1000w system.
    First, the 3.5 audio jack on the Mini connects the 3.5 next to the HDMI on the LCD. (I use a DVI > HDMI for video). Then 2 RCA jacks connect the chosen channel (in my case 'TV') on the LCD to the corresponding channel on the AV Receiver and there you have it.
    I have 600g worth of movies and music parked in an external and the 5.1 makes all the difference.
    Cheers

  • Mac mini audio out

    I have a mac mini.  what type of connector/cable do I need to output digital audio?

    Some Toslink Optical Cable Kits come with 3.5mm adapters.
    If you already have an Optical cable, then all you need is a > Toslink to Mini Plug Adapter
    If not, then you will need a > Toslink to Mini Toslink Optical Cable

  • Mac Mini Audio

    I bought a mac mini at the beginning of this month and a few days ago i noticed that the audio is only playing out of the right channel of my speakers
    i've tried using the earphones that came with my ipod and its only playing out of the right channel too
    any suggestions??

    Hello,
    First, I'd check the audio settings in your system preferences.
    Go to the  menu
    Then, System Preference
    Then Sound
    Then the Output tab
    Now, check the balance, and make sure it's centered and not to the right.
    Let us know what you find.
    I hope this helps.
    Let us know if you have other questions.
    P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

  • Mac mini sound output

    new 2014 mac mini -> two monitors setup -> upon "awake", sound output from monitor choice disappear.  Only to restart to have those output appeared again.  any solution?

    It depends on the sound input socket on the LCD. On the mini end, it's a standard stereo mini jack. If the LCD has the same, small, circular socket marked audio in, then a standard stereo mini jack to stereo mini jack cable will be what you need. On the other hand, if the LCD has two sockets marked audio in, one red and one white, then you need a stereo mini jack to twin RCA/phono cable.

  • New mac mini audio out through usb

    Do any of you know what is the output i would get if i connect my mac mini to my hifi stereo to playback my songs that are 24bit 96khz, can i get that resolution out?

    You certainly should be able to do that, not sure on your setup, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

  • Override mac mini headphone output

    Hey,
    I was wondering if it is possible to override the audio headphone output, so the internal speaker will play instead ? or, if the headphones are pluggin for the internal speaker to play as well.
    Thanks for your time !
    Paul

    My thoughts as well. The only work around I could see was to have extra hardware for the sound output via USB.
    _The back story_
    The reason I ask, as I suddenly had a strange circumstances, where I had to get a message to my girlfriend - at home, who's phone battery had gone flat. I was at work, so jumping into my shared screen mac mini, thinking I could play some music as a attention grabber, while displaying textedit message of "PHONE ME". But realizing that the mac mini was plugged into a TV on standby. I had to resort to restarting the mac mini constantly, to get a chime out. Obviously my girlfriend just thought that something was wrong with the mac, and ignored it. That is why I needed it. A one in a million occurrence.
    Since it has / must be a software issue, someone at apple must know the solution. Still this is on the list of "would be nice" .. but no where close to being on the "must have" list.
    Best,
    Paul

  • Mac Mini No Output Device?

    I can not get my sound to work on my Mac Mini!  In 'System Preferences' it shows 'No Output Device Found'?  There are no options listed for me to select an output device.
    If you have any ideas that might fix this problem I would really appreciate your help!
    datgrt

    do you have any audio apps working?
    open one up (quicktime player, dvd player, facetime, skype etc)  and look in its preferences to see if it offers you a choice.
    do you have a pair of headphones (to see if that provokes a physical connection)?
    is this a new problem? if so, whats different?
    do you have a cam connected?
    in system preferences, does it detect input, as in a microphone?

  • Mac Mini Audio out jack - s/pdif coaxial?

    The MAC mini manual says " the headphone port is also a S/PDIF stereo 3.5 mini-phono jack".
    So how do I hook up the MAC mini to my receiver's coaxial S/PDIF ports (standard RCA connector) - not optical Toslink ports.
    Are there three choices:
    1. stereo headphone (analog) output to analog input on receiver
    2. optical Toslink S/PDIF via mini-Toslink adapter
    3. mini 3.5mm S/PDIF jack to coaxial cable to RCA S/PDIF input (google search turned up a report this should be done with a monoaural 3.5mm jack)
    see http://www.ramelectronics.net/html/RCA-mini-spdif.html
    Or is option 3 a misunderstanding of the Apple manual?
    Will plugging a mono jack into a stereo headphone jack short circuit the two audio channels or do some other damage?
    The guys at the local Apple store didn't have a clue about coaxial s/pdif nor did Apple support by phone.
    Thanks.

    You'll need three parts (this is exactly how my Mac mini was plugged into my coaxial digital audio receiver, but with a converter from Radio Shack that doesn't seem to be available):
    1. mini-Toslink to Toslink cable (or Toslink cable with one mini-Toslink adapter)
    2. An optical to coaxial adapter, like this: http://www.smarthome.com/777097rp.html
    3. A coaxial digital audio cable (as you mentioned, could be a standard RCA cable)
    -Doug

  • Mac Mini Audio out only sending to right speaker

    I am running a Mac Mini OS X 10.6.4 as media center.  I am running video directly to my TV, which works fine.  I am running the audio from the Mac Mini out the headphone output through a Y audio Left / Right cable to a sub woofer. The issue I am having is that the audio is only coming out the right side?
    When I hook up a pair of headphones I get sound out of both sides, but when I switch it back to the Sony Soundbar it is segemented to the one side.
    Any suggestions?

    If the output works fine with a set of headphones and not the Sony soundbar, that suggests the cable feeding the soundbar or the soundbar have issues. Have you reversed the cable channels at the soundbar to verify that the soundbar is working correctly? If the working speaker switched sides, then get a new cable.

  • 2011 2.3 GHz mac mini audio got delay

    I am using a HDMI cable to connect my mini to a philips LCD with build-in speaker. When i play youtube video or using the text to speech function audio will got delay for half or few sec before u can hear the sound coming out from the speaker. I did call apple care and try to find a solution. They told me is my HDMI cable not meet the requirement. They said i have to use 1.3+ HDMI cable to solve the problem. Then i go out and got a 1.3b HDMI cable and the problem insist. I tried to use the headphone jack to output audio to a normal PC speaker, the audio work perfectly fine and no delay. Then i tried to use the headjack to output audio to my Philips LCD and set the output source to use headphone output, but no sound at all. I am hoping to use my Philips LCD speaker to output audio so i dont have to use another speaker on my desk. Hope someone can solve my problem. Lastly sorry for my bad English
    so i have 2 problems:
    - using HDMI to HDMI cable connect to a LCD with build in speaker, audio got delay.
    - using mac mini's headphone jack output audio to my LCD while HDMI cable connected to it cant switch the audio output to use headphone jack output.
    btw i am using lion 10.7.2 , thx

    I have a MacMini Late 2011 with 2.3 GHz I5 and 4GB RAM and I use it as media center... It's enough to play FullHD movies but it uses 256 on 512 MB of (shared)RAM... I don't think that you can use a mini for hard gaming...
    But AngryBirds Space on a 60" FullHD TV looks great
    edit:
    welcome to discussions... i'm a newbie too

Maybe you are looking for