Mac Mini can't see the same wireless networks as a Aluminum 24" Imac ....

I have a question for ya'll. Is there any reason why my new Mac mini 2.0g system can't see the wireless networks that my Imac can?
What I mean, is that I can see two Networks with my Imac:
1. Mine
2. Other networks around me.
On the Mini, using 10.4 or 10.5 My mini can only see my wireless network. Which is only 1 foot away from the mini (and Imac).
It has been suggested to me that my antenna is bad ... Are there ways to test this? Or is it just inherit for the mini?

The Mini has a much smaller antenna (the size of a larger postage stamp) -- and it is located in the back upper right corner, as you face the mini from the front.
The antenna is less capable than the larger antenna in the iMac, and it is more easily blocked. Make sure nothing is between it and your wifi router.

Similar Messages

  • Mac mini can not find the NAS

    In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

    I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
    Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

  • Airplay mac mini can't see apple tv, but itunes does

    it seems that my mac mini can't see my apple tv for airplay, macbook on same lan does see it
    both are connected via ethernet, mac mini has hands off installed
    i try to use guest account but can't see from there too

    I'm not referring to the latest version, I'm asking if your mini is 2011 or newer?
    Click the link I posted previously.

  • How do I share files between computers (mac's) on the same wireless network?

    How do I share files between computers (mac's) on the same wireless network?

    Turn on File Sharing in System Preferences - Sharing, then you should be able to see them in the other Macs' Finder sidebars (under Shared). Click on them, click Connect As, and log in with the user credentials you're sharing from.
    Matt

  • I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    I use a iphone and MacBook Pro using mail on each.  How can I see the same mail boxes on the laptop that I see on the iPhone?

    for starters this is not the forum for notebooks or for that matter icloud or iphone.
    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/iphone

  • Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Hello stacksofamber and welcome to Apple Support Communities,
    You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

  • After sync my iphone4 to itunes i can't see the same apps on itunes that are on my phone.  How do i make them show the same?

    after sync my iphone4 to itunes i can't see the same apps on itunes that are on my phone.  How do i make them show the same?

    Hello Louise,
    There are a couple of ways that you can download your apps to iTunes on your computer. 
    First, you can transfer your purchases to from your iPhone to your computer using the steps in this article:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/HT1848
    Alternatively, you can download the apps directly from the iTunes Store using the steps in this article:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT1461 For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    For Boot Camp, if you save a file when you are on the Windows side, when you return to the Mac side, can you see the file or can it only be "seen" on the operating side you create it in?

    Why don't you  (generic most every post lacks critical details) be clear and say you never used Mac OS etc.
    But, I did try to anticipate and give you what you needed.
    Excel is one of those rare programs that, if they are extremely large complex spreadsheets still tend to run better under Office for Windows.
    A VM won't do for that but it does make it easier to transition. As in: install Windows natively, then use VMware Fusion or Parallels to attach to the partition and OS. That way you can run Windows as Guest OS VM under Mac; and still run Windows natively dual-boot when needed.
    The word "see" was not what you wanted, was it? really? you want to open and make changes and keep it on Windows side rather than Save As or copy to Mac
    You use Windows and don't know it has NTFS (NT FileSystem)?
    http://en.wikipedia.org/wiki/NTFS
    http://en.wikipedia.org/wiki/Hierarchical_File_System (HFS) native file system used by Apple
    And there is much more UEFI style "bios" and other things I suppose.
    Great thing about Google and encyclopedias or dictionary, you can look up what you don't know.

  • How to connect 2 apple TV to the same wireless network?

    Hi,
    Can somebody please help me shed some light here on how to connect 2 ATV to the same wireless network? My first ATV connected to the network just fine and syncing with my itunes, however the 2nd ATV keeps getting problem connecting to the network everytime I tried to connect to the network. It detected my home network on Linksys router just fine, but it wont connect to it.
    Hope someone can help me out here... Thanks peeps...

    Hm ive make sure all the password and everything is correct and yet it wont connect. Keeps getting the problems connecting to the network, please check your setttings.

  • MacBook can't see my home wireless network after upgrade to OSX 10.8.5

    After upgrading to OSX 10.8.5, my MacBook does not detect any wireless nertworks. My iPad and iPhone work fine, my router has been rebooted, WiFi is turned on, and the ethernet connection is how I am writing this message to you via broadband. There are a half dozen wireless networks in range (according to my iPhone) but the MacBook cannot find the router I am sitting next to. Any ideas on how to correct this issue?

    It appears an SMC reset was required:
    HT5815 I've just done the 10.8.5 update on my MacBook Pro end of 2008, and WiFi don't work after reboot... Impossible to activate it...
    Here is your other post: MacBook can't see my home wireless network after upgrade to OSX 10.8.5
    If you reply to it and marked it "solved", perhaps with a link to that post (copy and paste it, or just say you performed the SMC reset) it will help others find a solution. Thanks!

  • Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Is there a way to play on the same wireless network with 2 different xbox 360 accounts?

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

    Welcome to the Apple Community Willy.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

    Is the maximum number of users for Airport Extreme per device, i.e. 2 AEBS = 100 users, one AEBS extending the other on the same wireless network?

    50 users per device, assuming that the "main" router is setup to deliver an adequate number of network IP addresses for all devices.
    2 AEBS = 100 users, but that is really more of a theoretical max. 
    If you really need 100 connections, it would be much better to use 3 AEBS to spread things out.

  • Mac Mini – can't see Internal HD after adding SSD-.

    I have installed a SSD in my brand new Mac Mini – it was shipped with the 1TB drive.
    I booted up and got the blinking Question Mark Folder.
    • So, I booted up with option held down; I could see the SSD and the Apple 1TB (which has Mavericks system installed).
    • No problem I thought – it probably needed me to choose the start up disk
    • Opened Disk Utility; I can see both drives; that's good! I thought I'd format the SSD while I was here, so I did.
    • Quit out of Disk Utility to get Start Up Disk options – both discs missing. Oh, dear.
    • So booted up again and did an internet recovery; putting a system (Mountain Lion) onto the new SSD (whereas before it was an empty, erased Disk).
    • This took an hour over the net but it worked. I booted up with it and it very fast – but the Apple internal 1TB is missing.
    Weird part:
    • Opened Disk Utility on the computer; I can see only see the new SSD; so I opened  Disk Utility to see if I could view the internal, nope - not there.
    • So I thought I would be scientific and boot up again holding OPTION down; opened disk Utility; and viola – there's both drives; each with a system and OK according to Disk Utility.
    So in a nut shell – when I boot up with Disk Utility holding OPTION I can see the internal BUT when I am booted up as normal with the new SSD; and open Disk Utility; I can't see the internal.
    Shall I just erase the 1TB internal and start again? I spent a bit of time Migrating my old machine to this 1TB; so would like to not to have to do that gain.
    Thanks
    Barry

    Hi 66 Firebird,
    I have similar issue. 
    I can see my Samsung 840 Pro 256 SSD and original 1TB hard drive in Internet recovery mode. But it did not allowed to format 1TB drive.  As soon as software installed into SSD and booted from it, my 1TB vanishes.
    Do you have any luck? 
    What did you to get your 1TB back?

  • MAC Mini can't see HD

    I have a AEBS working fine, sharing a printer and HD. I can see everything fine from my powerbook. Connect to the HD fine and can see it in HD utility.
    Today I tried to connect my MAC mini to AEBS, I can get out to the 'net ok but I can't see the HD.
    The HD utility doesn't see the HD and it won't even appear on the menu bar.
    Any ideas?

    Yep, clicked on the disck util, checked the buttons, it won't appear in the menu bar, even after I restarted and it won't see the drive. This is very strange.
    I can print and also get to the net from the mini
    Everything works on the powerbook fine.

Maybe you are looking for

  • Scheduling Agreements / Delivery Schedule / Firm zone, Trade zone

    Dear all. I am in the process of setting up scheduling agreements (LPA type) with firm zone and trade zone in SAP 4.5b The following issues  I have: 1.) with the release via ME84, it gives me an error 'no processing message ME 857, no message record

  • Get Directory name in Chinese and Chinese chars to Excel

    Hi, <b>Question:1</b> I use "cl_gui_frontend_services=>directory_browse" to get the Directory name from the presentation server. It works good for the directory names in English. However I need to perform a similar operation when the user has logged

  • Preview won't open.....period

    I have seen other topics on Preview, however it seems they are all about opening multiple files. I am unable to open preview at all. I deleted the com.apple.preview plist file and still doesn't work. When I try to open a pdf, Preview just blinks and

  • Error calling web service

    Hello experts, I've a function module (copy from SAP standard BAPI), it is remote enabled. From that FM, I generated a Web Service. Afterwards, I did the necessary steps in both WSADMIN en WSCONFIG. When I try to open it in an Internet Explorer sessi

  • IDVD slideshow in manual advance mode

    Has anyone found a solution to using manual advance for slides in iDVD slideshow. My slideshows created in iDVD will only advance or reverse using the arrows on the minicontrol panel that take you supposidely to the beginning or end of the slideshow.