Mac Mini crashes when HDMI-connected AV receiver powered off

This issue concerns a Mac Mini, mid 2011, running Yosemite. It is connected to a Yamaha AV receiver using HDMI and under normal circumstances works normally. However, whenever I power off the AV receiver, the Mac Mini crashes (spontaneously restarts).
I can't find any trace of a kernel panic, and there is no message after startup to say that the system has restarted unexpectedly.
For example, the system log from last night shows that is was performing a backup, and then there's the boot message at the time I shut the AV receiver down:
1/24/15 10:18:29.000 PM kernel[0]: hfs: mounted Recovery HD on device disk0s3
1/24/15 10:18:29.810 PM mds[32]: (Volume.Normal:2464) volume:0x7f8775141000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
1/24/15 10:18:29.854 PM fseventsd[20]: Logging disabled completely for device:1: /Volumes/Recovery HD
1/24/15 10:18:29.000 PM kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
1/24/15 10:18:29.982 PM com.apple.backupd[5261]: Starting post-backup thinning
1/24/15 10:19:17.000 PM bootlog[0]: BOOT_TIME 1422130757 0
1/24/15 10:19:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
1/24/15 10:19:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
I have swapped out the HDMI cable in case it is faulty, but this has not changed anything. This issue is easily reproducible but I haven't been able to find any possible solutions. It started after the Yosemite upgrade. Also, the AV receiver need not be displaying the Mac Mini video for this to occur. It will crash regardless of what channel the receiver is showing.
Any help would be much appreciated!

I have a similar issue after recently buying a receiver (Sony STR-DN1050) and wiring my mac mini through it.
Some observations that seems to be linked.
1. When I power up the receiver with another hdmi input than the mac mini, the mac mini switches fast between displays, from the TV name to unknown (observed through Remote Desktop), and sometimes log out the user.
2. Then, when switching to the mac mini hdmi input, everything works fine, as the mac will recognise the TV.
3. When switching off the receiver, the remote desktop disconnects and usually the mac mini will log off user or restart- not sure which.
Edit: Right now, when I powered off the receiver, the mac stayed on... no idea why, as it usually disconnects as mentioned above.
Edit2: As I look in the Display settings, the mac now recognizes my receiver as Display when it is turned off, presumably because I turned off HDMI pass-through on the receiver settings.
However, I still have problem 1 above: When I turn on the receiver with any other input than the Mac Mini, the mac will start switching displays and log out the user.

Similar Messages

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Mac Mini crashes when exporting imovie projects

Hi.
When I try to export imovie projects, my Mac Mini crashes. Not ever, just every two or three times.
My system is 10.6.7 and imovie is 11. Can anyone help me? Thanks, I apologize for my bad English

Thank you, I'll try!
I hope you're right, because is boring to see out of the blue all the screen getting grey and the window that invites you to reboot, without hope... It happens, for example, after two or three succesful exporting projects, then I reboot and go on for another two or three projects and then again... I'm afraid it's a RAM problem, but I'll try to update system and software.
Thank you again

Mac mini crashing when booting up

Hi, does anyone know why the mac mini crashes at bootup. it gets teh strart up ping, then the loading screen, then the harddrive turns off. any ideas why this is happening

I had a similar problem recently, my mini froze during a backup, held the power button down left it for a few mins and rebooted, only got the grey screen with apple logo and the spinning gear and that was it, could not get past that so I installed OS X on an external drive, the internal HDD took upto 10 mins to mount then vanished copletely a day or so later, in the mean time the optical drive stopped working as well!!, took it to the Apple store who thought it ws a dodgy interconnect board, but they called yesterday to say that both the hard drive and optical have conked out, and that the machine was packed full of dust, and possibly caused everything to overheat!! (am allergic to dust so keep my flat quite clean!!), to replace both costs about the same as a new machine so not worth it!. So off to collect it today and buy a new one. Have had the machine barely 2 years! and thought it would outlive my Dell PC!

Mac Mini crashes when connected to USB mouse!

This problem just happened all of the sudden--I came into my office a few days ago and there was the multi-lingual screen of death telling me I needed to restart my computer. Tried numerous times, no success--same message.
Took Mac Mini to Genius Bar--they said it checked out just fine.
Brought it home, plugged everything in--same problem!
Started eliminating USB and Firewire items that I was connecting to it. Narrowed it down to my Verbatim USB wireless mouse. When I disconnected it, the computer booted fine. However, can't navigate anywhere w/o a mouse, so I figured my solution was to just go buy a wired USB mouse.
Bought wired USB mouse. Same crashes! My computer will not boot with any USB mouse connected and when I connect a mouse after it is booted, it crashes the moment the mouse is connected.
Even if there is something I could install or uninstall, I can't do it because I have no navigation w/o a mouse!
Error messages on screen of death have to do with "kernels" and what not--again, if it was something I could replace/reinstall that would be great, but how can I do anything w/o a mouse?
Please help!!!
Thanks,
Phil

I have three 2008 model Mac minis, each with verbatim mice. Luckily one hasn't been upgraded to 10.6.8 because I'd be without a working desktop machine.
The 2010 Mac mini doesn't have this problem.
So far I've tried four different USB mice and all of them lock up the machine, even in safe mode.
I can't afford to go and buy three apple Bluetooth mice - it's the only way I can use these machines.
I hate downgrading machines, so I'm hoping apple supplies a patch soon.

Mac Mini crashes when watching a video online

I have a Mac Mini Model (2,1) with Mac OS X (10.6.2).
Environment:
I use my mac mini as an HTPC. I use a DVI to HDMI converter to connect to a 1080p projector. I use WIRED connection to connect to internet. The sound output is connected to my receiver.
Problem Description:
Recently, I have been experiencing system freeze and unexpected reboots while watching videos online. So I decided to do a fresh install of Snow Leopard. For about 5 days, the system worked fine and I was able to watch videos through YouTube, NBC, FOX etc.. The system started crashing again and the following is what i see in the CONSOLE.log file
* launchd[1] has started up *
(com.apple.Kerberos.renew.plist[100]) Exited with ext code: 1
Can someone help...
Thanks
Kris

Our 1 year old mini also crashed trying to watch a tv show from the internet - after about 5 minutes of the show it started automatically rebooting over and over again (10 + times). Now I can't get it to start up at all. We use this with our HDTV as an entertainment machine

Mac mini crashes when switching users without a display

Hello, i have this Problem on my Mac mini 5.3 with 10.6.8. I connect to the mac over vnc and when i want to switch the user the mac freeze. I got the Problem only when the Mac Mini hasnt got a display pluged in. When a Display is plugged in i can switch users over vnc. Can somebody help me??
Best regards

Our 1 year old mini also crashed trying to watch a tv show from the internet - after about 5 minutes of the show it started automatically rebooting over and over again (10 + times). Now I can't get it to start up at all. We use this with our HDTV as an entertainment machine

Mac Mini crashes when I attempt to boot to OS Disc

Can't reinstall/reformat. System crashes when I try to reboot with the OS disc in. Before that, when i started the computer, the pinwheel kept spinning and I had to boot in safe mode and run Disk repair. Then it booted fine. But my iMovie project keeps losing the sounds I put in and unable to control the volume of some sounds i put into the movie project. Could this be my hard drive is dying?

Hi Clifford,
Just asking, is the OSX Install Disc the exact one that came with that Mac?
Not that you'd want to use it if your on 10.8.5 though!
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Mac Mini crashes when airport is turned on

Hi
I have a mack mini from 2008 running leopard 10.5.7. It just crashed/hung the other day for no reason so i wipped the HD and reinstalled leopard after a long process of illimination. I had it working in safe mode prior to reinstall with no problems so i assumed this was a software problem. So after the reinstall everything works fine except for one thing. When i turn on airport it does exactly the same thing...just crashes and hangs. I have run out of ideas as to how to correct he issue. It's airport for sure and I have no idea why it's happening. Any ideas would be most welcome.
thanks

Thank you for the reply...I had already done the hardware test....but since posting if discovered this in an article and it works.
SOOOOO...here what this is....the airport tcpip settings(IPv6) needs to be switched off...it's as simple as that...
System preferences, Network, Airport, TCP/IP, Configure IPv6, SET IT TO OFF...and all good...
many thanks

Unibody Mac Mini Crashes

My Unibody Mac Mini Crashes when I switch my 1080P Samsung's input sources and when I switch back to the HDMI input source that the Unibody mac mini is on the Mini crashes and I have to hold down the power button to restart it.
I don't know why this is happening.

Sorry to hear you are experiencing this as well. Please see this post for more info:
http://discussions.apple.com/thread.jspa?threadID=2477139&tstart=0

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

Mac Mini sluggish when USB external drives connected

I'm not sure what's causing this issue, but I have a Late 2012 Mac Mini and when I plug in a USB 3.0 thumb drive or my WD My Book Studio (also USB 3.0), the mouse cursor is very sluggish and laggy. I will physically move around my mouse and the cursor is extremely slow to reflect such movements on the screen. It did it with an empty USB flash drive, so there's no indexing or anything else going on in the background. Ejecting the drive will not solve this issue until I physically remove the drive from the USB port. What's causing this and how do I fix it?

format the drives for MAC OSX extended journeled.....when you do that, is the problem still present?
Ive head of this before on WD drives (cant stand them) because they have some nasty bloat loaded onto them for installing them (no need for that EVER) on your computer.
when you insert the WD drive, does the drive come up AND ANOTHER icon saying something like "WD xxxx" (i recall its something like WD utility, or WD support) ???
Ive got nearly 100 hard drives, but wont own a WD, ....if i get a free one, i destroy anything on it with a erase and wipe with disk utility "format for mac osx extended journaled"
AS FOR YOUR STICK DRIVE,......are you sure its mac compatable??? most stick drives list that in the fine print, and mac owners buy a cheap stick drive that isnt 'kosher' with MAC

Mac mini (late 2012) HDMI video going blank randomly in Yosemite 10.10.1; sometimes comes back on with snowy screen

Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
I also have power management problems again with computer not sleeping properly and my Magic Mouse
being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
I also have Wake for network access, power nap and start up after power failure unchecked as well.
Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
These problems occurred after shutting down my Mac and restarting it this morning.
I know using a VGA cable will fix it but I don't want to do that.
Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
of HDMI video blanking out while in the OS.
I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
flawlessly and I really mean flawlessly. It was magical. Not a single problem.
I guess we have to wait for 10.10.2 or 10.10.3.
I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
no use for work or multimedia.
I'm sorry about the rant.
If anyone has figured out a workaround until Apple can issue another point release, please let me know.
I already tried resetting the SMC and NVRAM several times to no avail.
Thanks in advance.
I appreciate any help.
Paul

EtreCheck version: 2.1.2 (105)
Report generated 13 December 2014 at 9:03:00 AM GMT+7
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:11
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
USB Information: ℹ️
Apple Inc. iPhone
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DAEMON Tools Lite.app
[not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
/Applications/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.1) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.tencent.xin.WeChatHelper.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uHD-Agent UNKNOWN (missing value)
Google Drive Application (/Applications/Google Drive.app)
MacFortHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% WindowServer
      0% BBLaunchAgent
      0% AppleSpell
      0% fontd
      0% Google Drive
Top Processes by Memory: ℹ️
241 MB Safari
172 MB mds_stores
155 MB com.apple.WebKit.WebContent
120 MB spindump
103 MB Google Drive
Virtual Memory Information: ℹ️
11.13 GB Free RAM
3.86 GB Active RAM
998 MB Inactive RAM
1.19 GB Wired RAM
2.15 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 08:10:23 AM Self test - passed
Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash

Why Does My Mac Mini Crash So Much?

I have a Quicksilver PowerMac and a Mac Mini, and they both have (substantially) the same software configuration - the latest Apple software. The Quicksilver is solid as a rock. It never crashes.
The Mac Mini crashes frequently - I'd say an average of twice a day. Many different applications are in the foreground when it happens, but it is usually Safari. I suspect it might have to do with the memory that I substituted. I put in a 1 GB memory module - Kensington from Fry's. Memory tests say it is fine.
How can I track this down? Does Apple help?
Brian

First off, I would like to thank you all for attempting to help me out.
Next, I'd like to correct my original message. The memory is "Kingston", not "Kensington". (I was working from memory, and that doesn't always work so well.)
I think I'm going to go with the suggestion to swap the memory out and observe what happens. I was hoping that someone would come up with a method of finding a "smoking gun" - something that would positively identify the memory as the culprit or eliminate it as the problem. I guess it doesn't work that way. Last night (all night long), I ran REMBER, a GUI "wrapper" for the "memtest" command line program, and it found nothing. I suspect I can run it for a weekend and get the same level of information.
I hope Andy's right about his "no quibble" comment. I called Kingston, and when I told them that I had the 1 GB PC3200 DDR, he informed me that the Mini was spec'ed for the PC2700 memory. It's my understanding that both of these are supposed to work (the 3200 slows down to 2700), but I can see the beginnings of quibbling.
Brian

ITunes crashes when I connect my iPod to the PC when iTunes is running....

I have written about this problem before, but there have not been any successful solutions as of this date. I will explain my situation a little further and maybe someone can help.
Most of the time, when I connect my iPod to my pc while iTunes is running, the instance the iPod shows up on the library site, and whenever I move the cursor, iTunes crashes, so I have to close iTunes right away and try to disconnect my iPod. Most of the time, a message comes up that says info is being transferred to the ipod and that I shouldn't disconnet it at that time, but I usually go ahead because I know it isn't transferring at that time, since itunes has crashed.
Sometimes, after I have clicked on the first message to go ahead and disconnect my ipod, another messages comes up that says something to the effect of, "You can't disconnect because it is being used by another server at this time." So I click "OK" and then iTunes stays on for a few moments which gives me time to transfer a song or two, but then itunes crashes as soon as it finished transferring or before it finishes.
As anyone can imagine, this has really become a hugh problem. Having an iPod and not being able to use iTunes makes it very unhandy. I'm not able to add any new music or any of the playlists which i have been working on. Does anyone have a solution, or any suggestions as to what may be going on? It would be deeply appreciated.
I plan to restore my iPod in a day or two if I don't get a solution to this, but I don't have all of the music, videos, etc. that I have on the iPod since I removed much of it from iTunes to help the computer run faster. I had over 2000 items in the library, so it was pulling the pc down and it was taking forever to use the computer.
I am unable to use any of the software to transfer everything from my iPod to the iTunes library because of the problem with iTunes crashing when I connect the iPod, so this isn't a solution at this time.
Someone, please help!
HP Windows XP Using DSL for internet access

I suspect a hardware problem. But do the following to rule out a software problem:
- Reset. Nothing will be lost.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Resore the iPid to factoery defaults/new iPod.
In the latter part of you post, I thin you ar sayng that you do not have a syning computer and the music is not on the computer. If so, do the following so you will not lose anthing (or very little) when you restore.
- Transfer iTunes purchases to the computer:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Best iPod to PC
- Connect the iPod to the computer and right click on the iPod under Devices in iTunes and select Backup. This will make a backup so you can restore to the backup

Mac Mini crashes when HDMI-connected AV receiver powered off

Similar Messages

Maybe you are looking for