Mac Mini data restore?

My Mac Mini would not boot apple care said they could replace drive but I should use firewire to use my imac and boot mac mini into slave mode and copy files off. I did that they replaced the drive how do I get data back? The copy was just drag drop copy not time machine.

This is the first time I posted so should have phrased it better here is the question
I have Mac Mini would not boot Apple care said my hard drive was going bad and to use Firewire to connect it to my iMac and boot mini with T held down and would become slave disk and I could copy everything off before they replaced the hard drive. I did, and now have it back do I do the same thing to move all stuff back to Mac Mini?

Similar Messages

Mac mini cannot restore

My mac mini is version late2012 updated to 10.8.5. It cannot boot up after I install USB driver ( I nned that driver for my 4G USB Dongle). After that I restore using internet and I'm sure it complete download during restore process ( log file shows all 424 chunk downloaded) but when it restart by itself it hang like before. I did this 2 times which mean that I waste my download quota about 9G. Anyway I try other way by making USB bootable both form 10.8 and 10.8.1. I purchase Lion via App Store and restore to USB. But still cannot restore.
One step that I not yet try is to completely Erase the volume. I want to customize during restore and repair back the driver and I love my 600G data and no backup yet.
Any help?

That means the startup drive is malfunctioning.
If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

How do I transfer my mac mini data to a new mac mini?

I used Migration Assistant to transfer my data from my old Mac Mini to my new Mac Mini. Now when I turn on my new Mac Mini it shows a login screen with my old mac and my new one. If I login to my old one everything is there, however it still looks like the old Mac. If I login to my new mac there's nothing there from the transfer. It's like having my old Mac Mini and the new one all in the same computer. How do I get everything from the old Mac to the new one?

That's because you used Migration Assistant after you setup your new MacMini. The trick is to use Setup Assistant when you setup your new MacMini.
You can't use Migration Assistant to migrate data to an existing User Account. It Migrate your old User Account.
Your options now:
1.Delete the 1st new User Account that you created when first starting the new MacMini. You would do that while signed into the older User Account. Job done.
2. Erase the drive and reinstall OS X, and when prompted use, Setup Assistant. This would take a lot of time, and you would wind up with the same configuration as option 1.

Macbook Pro to Mac Mini data sharing, sync, and/or time machine backup?

I currently have a MacBook Pro and am about to buy a Mac Mini. I do a good deal of multitasking on the MBP I and would like to use the Mac Mini as the "home base" of my dealings and my MBP as an extension of it, the way it should be. In short, I will have a desk for the new Mini but I don't really intend on ever being physically at it. Rather, I will be on my MBP or remoting in to it from a PC. At any rate, as an example, is it possible / what would be the best solution for being able to work on my iWeb site via my MBP if it's housed and stored on my Mac Mini?
Secondly, since I will now have 2 mac machines, there is a data question at hand. Specifically, is there a good way to sync all information and settings bewteen two macs running Snow Leopard? If so, what/how, if not, what would be the best option for accomplishing this type of goal?
Lastly, since I will now have 2 mac machines, how should I handle the time machine backups? I have a 2tb ext hard drive serving as a time machine backup for my MBP right now but how would I go about doing the same for the Mini? Should I / can I use the same drive for the mini or does it have to be a seperate time machine backup?
(For the record, I do have an additional 2tb ext hard drive that I would be happy to use as a sync point for all of this data if needed should it be possible to "share" data, apps, etc between the 2 machines. I would be able to broadcast it wirelessly via a device called pogoplug.)
I feel like there is a better and more efficient way to integrate what it is that I'm trying to do here. Any thoughts on the matter?

There are numerous solutions to sync information on two or more Macs. Try doing a google search for "Mac sync" or something along those lines.
As for Time Machine backups, you could connect an external disk drive to your Mac mini and use it as a Time Machine disk for the Mac mini and if you share it out, you can probably also use it to do Time Machine backups of your laptop, but I personally have not tested that yet so I cannot say with certainty that the sharing part will work.

How to clone one mac mini and restore on another

Hi,
I have 2 mac mini's. Both are version OSX 10.6.8.
Is it possible to backup one Mac Mini and fully restore on the other so it is an exact clone? So software, files, user accounts, settings etc. would all need to be backed up and restored from the source machine to the target machine
Cheers

See:
http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-mac-hard-drive/
You can use Disk Utility if you boot into recovery as described in the article
If you want to cone one Mini to the other, Boot the source Mini in recovery and the other one in Target Disk mode and connect the two via firewire

Brand new Mac Mini data transferred instore - what's my admin password?

Picked up my new Mac Mini today from Apple Store, data has been transferred from my windows laptop. They've set up a user account with the same password as my laptop. I've tried to download Flash from Adobe - one of the main uses of the Mini will be for internet TV - and it's asking me for a password. My login & Apple ID passwords aren't working. I don't know what the admin password is
I've since looked at a few other settings & I need the password there too.
I've only briefly used a Mac before, several years ago, so I'm very confuddled & frustrated.
Can anyone please help

Ha problem solved . . . . . after about 30 minutes on the phone to tech support via south east asia & neither of us being able to understand each other very well and trying the same thing over & over & it not working . . . . . . him booking me an appt at the Genius Bar . . . . . I quickly called the store I bought the Mac Mini from . . . . . the password is set up as no password . . . so I needed to do was press return . . . . .
Thanks for your help

Mac mini, data sync with ipad2, + photo editor suggestion

Don't stop reading when you see the word "windows".....On windows (yes, the blasphemy OS), if I connect my ipad 2 I get an icon and can explore the ipad photos folder as if it were a removable drive, drag 'n drop, copy/paste. I havent found the same functionality on a mac. Can I add the ipad as a mount device? Also, what's the best file synching app avail avail from the app store. I want to be able to do just as I do with my other devices, sync photos, files, etc. to a designated folder (NOT A DEFAULT, UNCHANGEABLE FOLDER, but one I specify) automatically when I connect the ipad to my mac. Ive seen several solutions on the net, but most of those are the usual "install our FREE download manager app", which is usually malware. I don't mind spending a little money to get a product that will work easily but I prefer to get it from the app store to minimize risk. Also, I want to edit photos, crop, lighten, darken, selectively make changes to areas, etc.. Any ideas on a good product for mac? NOTE: Mac mini, only 8gb ram, so don't have a lot to play with. Thanks in advance for the help.

I persuaded my group to switch to iphones, and acquire ipads. I've been "volunteered" to write instruction guides on installing the software we need to use. As part of that, I need to be able to take a screenshot, copy parts of that screenshot, move parts around (buttons etc), draw arrows, insert text boxes, adjust lighting (i.e. make all but one selection dark/grayed out) to help those who are, shall we say, a bit slower at things identify the appropriate area being referenced in the document. I looked at iphoto, but it doesnt have the features.
Thanks for the suggestion on iFunBox. I don't want to use freeware on work devices due to the risk of malware. I know apple is more secure than winblows, but it wouldnt be difficult for someone to write a pretty app that does one thing on the surface while doing other things in the background. Purchased/licensed software *should* be inherently safer, as well as having vendor support for upgrades/troubleshooting.

Mac mini lion restore from USB drive - getting no-entry sign

I'm trying to recover my dead mac mini, and I'm having lots of problems. The disc is dead - I've booted in target mode and been able to reformat it from another machine, soit's working to that extent.
There's obviously no recovery system running now, and I need to get Lion running because Mountain Lion isn't supported.
I've created a few flash drives to boot from - downloading the lion install package, opening it, taking out the .dmg file and using disk utility to copy it - all as recommended by other advice.
Each time what happens is that the boot starts, then it hangs with a no-entry sign.
Any suggestions?

Which version of OS X came with your mini?

Help with Mac Mini data recovery from damaged harddrive

So I've recently had a hard drive failure with my Mac. This is the second time it's happened with the first instance being my fault as I overloaded the fan with too much ram and it kept overheating. This time I got it home turned it on and got the icon that has a folder with a question mark. So I rebooted it while holding alt and performed an internet recovery. I tried a repair but it was greyed out, so I contacted apple and they said I should have it checked and attempt a data recovery providing the drive is not badly damaged.
I have been on the phone to a repair service and they said they can perform a recovery for a minimum of £100 to a max of £200. I'm aware there are places that provide services on badly damaged drives for extortionate prices so I won't be giving them a try. The turn around time is also a maximum of a week. The hard drive is over a year old so I would like to keep the files i have on it as I need them for work.
Is this a good price for data recovery, or is it possible to get it cheaper at other shops? And is there anyway I could do the same at home for cheaper? If anyone has any places they could recommend that can do the same for a better price that would be great as I'm currently living in London.
Thanks

It depends on the nature of the problem what the best solution will be. However in a case where I had a hard drive with a physical problem (rather than corruption), I was able to recover the data using Disk Warrior. Disk Warrior can not only rebuild the hard disk directory (in the even of corruption), but if the hard drive has a physical problem it can build a hard drive catalog in memory and with that create a virtual drive on your desktop from which you can recover files.
It depends on how sick the drive is but if it is 'merely' terminally ill rather than completely dead it can get you out of a hole. If you hear the drive repeatedly clicking then this is usually a sign of a terminally ill drive. I recovered several hundred GB this way.

Built-in ethernet port not working in unibody Mac Mini

Hi,
So ever since I acquired this new mac mini I haven't been able to get it to recognize any devices connected via ethernet. I obviously checked the cables and all is good there. I tried connecting it to another mac, and while the other machine was detecting a device (the mac mini) at the other end of the cable, the mac mini kept saying that the cable is unplugged or the device off.
After several days of having the issue I decided to remove the ethernet service from the network preference pane to set it up again but to my surprise, the built-in ethernet option was not available (I only got airport, firewire, bluetooth DUN, VPN, PPPoE and 6 to 4). At this point I tried removing the networkinterfaces.plist file form the system configuration folder in the system preferences folder to no avail. I then tried to zap the PRAM, NVRAM, reset the SMU, SMC and all that kind of things to get the port recognized by the system but no luck.
When I look at the system profile I get these weird results in Ethernet Cards:
pci14e4,4353:
Type: Other Network Controller
Bus: PCI
Vendor ID: 0x14e4
Device ID: 0x4353
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0093
Revision ID: 0x0001
Link Width: x1
BSD name: en0
Kext name: AppleAirPortBrcm43224.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrcm 43224.kext
Version: 425.16.2
Comparing it to other macs I have It should read "ethernet" rather than that strange pci name on top and the kext name shouldn't read airport but something like AppleIntel and in location it shouldn't direct to the IO80211Family.kext package but rather to the IONetworkingFamily.kext.
So I popped in the system install DVD and fired up System profiler and at that point I didn't even get an "ethernet cards" option in the left side pane. So this is leading me to believe that the hardware is not being recognized at all, so maybe it's damaged. I did replace the HDD with a bigger one and change the RAM modules to bigger ones but I don't think I could have damaged the hardware in these processes, also I don't see how this would affect the ethernet port as it's integrated to Motherboard and didn't messed with it at all (I was very careful, to say the least!).
The last thing to do is reinstalling the system but I don't think it'll help (after seeing that the ethernet port is not even being detected by the install OS) but I need to offload all the data from my internal disk and at the moment I don't have an spare drive to do it.
So, what's the recommendation? A field trip to an Apple Store? Closest one is like 3,000 km from where I am right now, so...
Well, thanks for any pointers, suggestions and help in general.

I do not have any answers for you. Yes it appears to be reading what should be an ethernet card as an AirPort card. Have you played around with trying to install another version of Mac OS X other than the version that shipped with the Mac mini? Apple has long told us that we should not install a version of Mac OS X that was older than the shipping version. With the Mid 2010 Mac mini, the Restore DVD has the only version of Snow Leopard that will work with this Mac mini's specific hardware. At least until Apple releases 10.6.5. If you have installed other versions of Mac OS X, then erasing the HDD and installing the OS from the Restore DVD(s) that shipped with the mini may get you back to the point you need to be.
Unfortunately I think that you voided your Apple Warranty when you installed the different HDD. That was always a question in the past when folks wanted to open the former version of Mac minis and upgrade the RAM. But with the 2009 models folks started reporting here in the Apple Discussions that Apple was informing them that they had voided their warranty by opening their Mac mini. This new model made the RAM user upgradable, but the User Manual specifically states on page 43, 54 and 61 that there are no user serviceable parts in the Mid 2010 Mac mini except the memory.
Dah•veed

I need to erase the HDD and reload OSX on my new mac mini without a DVD

I have purchased a Mac Mini and restored from a time machine backup, however I need to erase all the data so that I can give this computer to my son, how do I delete everything and reload OSX. Please I need some help. Thankyou

erdmd wrote:
...I need to erase all the data so that I can give this computer to my son,...
See Thomas Reed's How to Prepare your Mac for sale
Also see Kappy’s comprehensive post here...
https://discussions.apple.com/message/21565512?ac

Problem migrating to new Mac mini Server from Time Machine Backup

I sell my old Mac mini Server and after I purchase the new one (unibody). I had the Time Machine Backup but I'm not able to restore it to the new mac mini. I started it with the Server Install DVD into it and I went to Utility menu to choose "*Restore from Time Machine backup*" but it said that *it was not possible to restore the backup to this machine because its a different hardware, and suggested to use Migration*. So I restarted it and when it asked me to choose between "setting up a new server" or "transfer information from an existing server" I chose this last. In the next menu didn't appear any Time Machine backups so I mounted the time machine backup and copied the Latest hd backup to an external firewire hd and I connected it to the new one. In the migration menu list appeared my backup but there was a *yellow triangle icon* over it and the message "*Migration is not supported from servers which are configured to use dynamic network addresses. Configure the source system to have a manual network address and try again*". But how can I config a static address into my backup if I can't restore it into a machine? I don't have anymore the old mac mini to restore the backup and make any change in the configuration!
Any one can please help or give me suggestions?
Many thanks

I solved it!
I changed the network settings by editing /Library/Preferences/SystemConfiguration/preferences.plist
So I successfully restored my SL server installation, but now I have an issue with Ethernet and SD reader. See this post if you are interested:
http://discussions.apple.com/thread.jspa?messageID=11709463#11709463

How can i copy my data files from a windows backup to mac mini

I recently purchased a mac mini and waiting on its arrival. I am converting from WinXP and my current system is not working at the moment (started smelling smoke one day and the video hasn't displayed since from the PC - so its been shut down). I can easily fix whatever the issue is with the PC - however - my question is. I perform periodic backup of my data files to an external drive with Windows Backup, can I restore my files from the Windows Backup to the Mac Mini? If I don't have to fix the PC - I can save that cost and buy an CD drive for the Mini (or something else).
I haven't investigated the real problem on the PC - I just know its hardware related (not OS).
My last backup was atleast 1 month ago - so I know I might lose a couple of things....but not very much. If its "simplier" for the migration process to fix the PC - then that is the answer but if I can extract from the external 1TB Seagate. I think I only have 50GB of data (itunes / pictures / etc)
Thanks

Maybe by:
Switch Basics: Migrate your Windows files or system to your Mac
It depends upon the format of the disk.Yu will likey have to:
http://reviews.cnet.com/8301-13727_7-57588773-263/how-to-manually-enable-ntfs-re ad-and-write-in-os-x/

Alum Mac Mini SLOW after restore from Time Machine backup of 09 Mac Mini

Hi,
I bought a 2010 Alum Mac Mini (2.4Ghz/2GB/320GB/OS10.6.4) a couple months ago, and I restored it from a time machine backup from my old '08 Mac Mini (1.83ghz/2GB/OS10.6.4). All data moved successfully, but this machine seems 2x slower than my old Mac Mini.
Issues I'm encountering include:
iDisk sync extremely slow
launching Apps slow
Trouble handling more than 3 or 4 open apps (Chrome, iTunes, Pages, Numbers)
Is it possible that this is an issue because of restoring from the backup?
Thanks in advance!
PS - I'm a fairly intermediate-advanced user, no programming background, but solid on most other things.

Welcome to the Apple Discussions!
If you still have the TM backup, I would suggest erasing the new Mac mini's HDD and doing a fresh install from its Install DVD and then do a migration of the TM backup rather than a clone. There is something in that clone that the new mini does not like.
You could also, as an alternative, try installing Mac OS X from the Install DVD over the top of the clone and see if it fills in the gap or corrects whatever the new mini does not like. This should not touch your data, just install Mac OS X Snow Leopard over the version already there. But you should always make a backup of anything that is not backed up.
Dah•veed

My mac mini is running very slow all of a sudden, how can i restore it's speed?

my mac mini is running very slow all of a sudden, how can i restore it's speed?

This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; grep -q 'No th' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; o=`ls /L*/L*/Dia*/*.panic | wc -l`; Ps "Panics"; o=`ls /L*/L*/Dia*/*.c* | tail`; Pm "System crash logs"; o=`ls L*/L*/Dia* | tail`; Pm "User crash logs"; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(egrep -v '(local|broadcast)host' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in {0..1}; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac Mini data restore?

Similar Messages

Maybe you are looking for