Mac Mini does not start up and if it does, it hangs

My 2010 Mac Mini shows grey screen with progress bar on startup and after some time I get multi language restart notification. I reboot and etry and it seems to work but once it goes to sleep there is n waking up. Please help.Could it be the last Mac update?    

Thanks Eric.
I tried that. Disk Utility told me that there were some node sector errors (I think that's what is said).
I somehow managed to take a time machine backup But that was the last I saw of my Mini booting up.
I decided to use Lion Recovery, formatted the HD (via disk utility) and when I tried to reinstall Lion, I would see the error 6002F/P. I took the machine to local Apple service center (place where I stay there are no direct Apple service centers only Apple authorised ones (genuine), but understanding is that they are skilled enough)
That was 2 days ago and today I came to know that the mother board had gone kaput.....is that possible? This machine is not even 2 years old and has not been treated bad.
They will get back to me by evening with estimates. I do not have many options and am worried.Disappointed.
Any suggestions? Second opinion?
Anyone knows/has had similar problem...please let me know what can be done.

Similar Messages

  • My Mac Mini is not starting, but when it does it goes to the grey screen, but sits there making a clicking noise

    My Mac Mini is not starting properly, when it does it goes to a gray screen, but sits there making a clicking noise

    Welcome to Apple Support Communities
    What OS X version have you got? Press Option key and check if you can select OS X

  • Help, my Mac mini will not start up, only keeps thinking on first page( white screen with apple emblem)

    Help, my Mac mini will not start properly. Only goes to the white screen with thinking. Will not go to the password section

    Are you sure about your hard disk health, any clicking noice recently?
    Go to boot menu (press option button or button left to your space bar while booting) > Select Recovery drive > Disk utility > Verify the volume on which OS X is installed.

  • Mac mini will not start up

    I recently upgraded my RAM (3 months ago) on my 2006 mac mini at a licensed dealer. It has been working fine, until 3 days ago it froze with the little colour wheel still spinning so I powered it down holding the power button on the back. Now when I start it up it makes the start up sounds and goes to the grey screen with the apple logo, but stalls there. A loading circle goes round and round and a progress bar shows up at the bottom. The bar does gradually fill up(takes about 24 hours), but nothing happens (it doesn't get past this page).

    I would insert the first OS X disk that came with the system in the DVD drive, and boot holding the alt/option key down. Choose the Apple hardware test, and when prompted choose the extended test. Does that point to a hardware issue?

  • Mac mini does not start up after password is given

    Our mac mini is strating up, but when entering the right password there's coming a blue screen and you return to the login where you have to enter your password. Whe are sure we are typing the right password but the mini is not starting up and every time returns to the login user screen.
    OSX 10.4 and not a intel mini.
    Can anyone please help us.

    Hello, first try this...
    "Try Disk Utility
    1. Insert the Mac OS X10.4 Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Mac Mini won't start up - I have Leopard DVD, what can I do?

    Hey friends,
    I need some serious help. My brother's intel Mac Mini will not start up - it stays on the progress wheel interminably, until it goes to an error screen - and so I want to fix it using my Leopard install DVD. (FWIW, Tiger is currently installed on the Mac Mini).
    What can I do to start the computer up with the DVD? I eventually want to Archive & Install.
    Thanks so much for your help!

    If it were me ... and if there is more free space on the external hard drive than there is "stuff" on the Mini that needs to be saved ... I would probably connect the Mini to the G5 with a firewire cable, connect the external to the G5, and startup the Mini in Target Disk Mode (which will mount it on the G5's desktop.) Then I'd rescue everything of value from the Mini's hard drive by copying it in small chunks to the external drive.
    Then I'd shut everything down, disconnect the cables, and boot the the Mini from the Leopard disc and do a clean install. Then I'd bring the relevant data files back from the external drive.
    (The actual details might vary slightly.)
    (I see Nick had the same simultaneous thought -- though he expresses the process more clearly than I.)
    Message was edited by: Boece

  • Mac Mini won't start with scheduler after power loss

    Hello,
    I have a Mac Mini here. It is configured to start at a certain time (say 1:00 AM). In the evening I shut down the Mac Mini and power off the socket where it is connected. In the morning I switch on the power socket and the Mac Mini is not starting.
    When I do the same thing with an iMac everything works. The iMac will start because he missed the 1:00 AM.
    I checked this with the current Mac Mini MC815D/A: here it works again!
    So, what is wrong with my Mac Mini? I have this model:
    APPLE #MAC MINI 2.4GHz (MC270LL/A)
    Model No: A1347 (EMC 2364)
    Model ID: Macmini 4,1
    Can this be verified my some other user?
    I use the latest firmware, and this behaviour shows up on several OSes (Snow Leopard, Lion and Mountain Lion)
    Best regards
    Matthias

    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions,  then move these files to the Desktop.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist
    (Then Trash the original of these last two, as "moving" them only copies them.)
    Then reboot once more.

  • My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen

    My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
    I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
    Reset SMC  no change

    Run the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.

  • My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

    My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

    Try disconnecting any external devices, especially hard drives
    and try rebooting.
    If that doesn't help, then :
    If you are running Lion, boot to the Recovery HD and run a
    Repair Disk on the OSX partition.
    If Snow Leopard, boot to the installl DVD and run Repair Disk.
    Also, you may want to bookmark this:
    http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
    for future reference.  It is a pretty good explanation of the
    Mac boot process and how to identify where problems may be.

  • My new mac mini does not see usb drives, but in hardware info the usb is visible

    my new mac mini does not see usb drives, but in hardware info the usb is visible
    i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
    what is wrong and doe anyone has a solution ?

    It does not show up in disk utility, its only visible through systeminformation.
    When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
    To remove it I shut down the computer because I cannot eject the USB device anywhere.
    After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
    By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
    I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

  • My Mac Mini won't start. The Power light blinks continusly (not pulses)

    My New Mac Mini won't start up. I bought it online from J&R a week ago. My monitor says "no input detected" and the power light blinks. I recently fed it the gray mac os x install disk one, which it won't give back. Holding the mouse button when it turns on doesn't have any effect. So now i can't put a disk in or start it up.

    Welcome to the Apple discussions.
    No video with the power light blinking once per second means either bad or no memory. See this Apple note: http://docs.info.apple.com/article.html?artnum=303083 . Specifically, below is from that note:
    If the computer detects no SDRAM (Synchronous Dynamic Random Access Memory, also referred to as RAM) or the RAM installed does not meet the appropriate specifications, the screen will remain black but the power LED on the front of the computer will blink once per second to signal the error. This error condition may be due to physically damaged RAM, installing the incorrect type of RAM, or not having RAM installed.
    Has it ever worked since you got it? If not, you should call J&R and tell them they sent a dead on arrival system, and ask for a replacement (ask them to send a will call tag or prepaid label to send the non-working machine back).

  • ITunes on new Mac Mini does not show shared libraries on network or songs on NAS drive

    iTunes on new Mac Mini does not show shared libraries on network or songs on NAS drive
    The latest version of iTunes on a 3-month old Mac Mini (8 gig RAM, OS 10.10.2) does not see any of the shared iTunes libraries on a  MacBookPro (MBP) (OS 10.9.5) and a 14-month old Mac Mini (OS 10.9.5). And a network shared drive/media server does not appear as well. I have a Gigabite Ethernet G4 and on it, the MPB and the "old" mini I can see the various shared music libraries and NAS, but not on the new Mini.
    The little house with a music note inside it that I see on the upper left corner of the iTunes 12.1 window on my MBP does not appear on iTunes 12.1 on the new Mac Mini. I have gone through all the iTunes preferences and can not find where I can turn on this feature. The new Mac Mini is on the local network and I can reach the internet successfully.
    I have been using iTunes since its beginning (still have a PowerTower Pro with a working copy of SoundJam), so I am not a newbie, but this has me baffled.

    May I add, that I gave full rights to the user at the Mac Mini to access and change data on the server drive for ITunes Media.

  • Help - Mac Mini does not boot after re-install of OS X

    Hi,
    I have a Mac Book Pro and Mac Mini. I needed to reinstall my Mac Mini but lost the install disks. The install disks of the Macbook do not work (machine specific). So what I did was boot the Mac Mini in firewire target mode and installed OS X to it from the Macbook. Worked ok. Except for one thing: The Mac mini does not boot the fresh OS X installation. I get a blinking folder icon with a question mark on top of it.
    I booted from the Mac OS X install disk, repaired disk permissions etc. and tried to use the "Startup Disk" utility to select the hard drive as a boot device. But that utility does not offer me to select the hard disk, it doesn't even show up (while DiskUtility can perfectly see it).
    Any hints for me? I am pretty much stuck right now.
    Thanks

    Well, see, the fact that it wouldn't let you boot from the MacBook install disks should have been your first clue to not try to do it. There's a reason it wouldn't let you. The MacBook install disks contain a version of the OS specific to the MacBook, in order to prevent people doing what you just tried to do (ie, installing the same copy of the OS on multiple machines).
    If you don't have the Mac Mini system disks any more, you'll have to go buy a copy of OS X. You could also ask for help from an Apple Store, if there's one in your area, but I honestly don't know if they would give you new disks. I would think they should (for a small fee), since Mac Mini system disks would be useless to anyone who didn't already own a Mac Mini, but you never know.

  • When i plug my itouch into my computeri get a pop-up that says "this ipod cannot be used because the apple mobile device service is not started." and when i plug it it my itouch name does not come up on my itunes, how do i start it and fix this?

    When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT4759 My mac mini is not updating its software to OSX Lion v10.7.5.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.

    My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud.  I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8. 

    You need to get the newer version from the Mac App Store.
    (70404)

  • Mac Mini won't start and constantly makes disc ejecting noise

    My Mac Mini won't start. It was working fine, then just locked up and won't start again. When I push the start button it just makes this repeated disc ejecting noise from the DVD drive. It doesn't make the chime noise or display anything on the monitor. I've disconnected the optical drive, but it didn't help. Then it just doesn't start at all. I thought that if I would disconnect the optical drive, that it would ignore it and just boot off the hard drive, but nothing happened. The power light comes on. Then, if I hold down the power button for 10 seconds it shuts down. The fan operates. It just never attempts to boot up. I can't put in a system DVD because the optical drive is just in eternal eject mode.
    If you have any suggestions let me know. Thanks.

    I have the same situation.
    I think the drive thinks it has a disc to eject or part of the mechanism is stuck and can't return to it's resting position. I was going to disconnect as you tried but now I think I'll try to disassemble the drive to see if there might be some debris jamming things up.
    Please let me know if you solve the problem.

Maybe you are looking for