Mac mini doesn't recognise audio CD's when trying to download
I'm trying to download a new audio CD I have bought to my Itunes library through Mac mini-however it doesn't recognise the CD and just spits it out. It has previously imported CD's. I have tried several different CD's to check CD not faulty but no difference-can anyone help?
Your optical drive is probably bad. You can try restarting the computer, or try blowing out dust or fuzz that may be blocking the laser in the drive, but it isn't at all unusual for optical drives to simply stop working after several years. You don't say which model Mini you have. Post this issue with the exact model number on the appropriate Mini forum and people can give advice on options. if you are technically inclined you may be able to replace the drive yourself, or you may simply decide to purchase an external optical drive (which may be cheaper if the alternativeis taking the computer to an Apple Store, unless still under warranty).
Similar Messages
-
Mac mini doesn't recognise Powerbook G4 in Target Disk mode
The hard disk on my Powerbook G4 is reporting errors so I would like to get the data off it by connecting it to my mini in target disk mode with a firewire cable.
The powerbook drive fires up into target disk mode but the mini doesn't seem to recognise it. Anyone else had this problem and solved it?
Thanks in advance.
MKHi,
Thanks for your reply, I cannot get startup manager to come up unfortunately, I have tried trying to get startup to take place with the 10.4 bootup DVD, but couldn't get that to work either. I am thinking of resorting to using DiskWarrior DVD to load from it and see what I can salvage.... -
I need safari on my computer. I have attempted to download safari. It would not update. I attempted to upgrade from leopard to 10.7, but it would not upgrade.
Kevin HolmanApple will want you to update to a newer OS to download Safari. However, you can get an older version of Safari by downloading it from this third-party site. Download the version for your OS. Then, after installing it, open Software Update, and check to see if there is a newer version that is still compatible with 10.5.
-
My Mac Mini doesn't recognize my Avengers DVD--it keeps saying "Supported disc not available." I've tried other DVD's which work, but not this one. itunes and everything else has been updated to the newest versions. Help? Also...It doesn't recognize the digital copy DVD.
I have ALL the exact same symptoms as on my home computer.
It sure sounds to me like something on the iPod is broken. If it's under warranty then I would send it back for repair. If not, check out some of the web repair services, such as iPodResQ etc. -
I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?
The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.
-
TS2057 mac mini doesn't see dvd
Recently my mac mini doesn't see dvd's when i put them in to play.
I have to agree with Dah●veed and use an > LG GE24LU20 Reviews that I call Brutus.
Not only has Brutus spared the SuperDrives in both my 2006 iMac and 2010 Mac Mini, but he runs circles around the SuperDrives when it come to burning, importing, playing, even booting from System Install and Upgrade Disc's.
Other External DVD Drives that are highly reccommended here in the forums, are:
OWC's > SuperDrive DVD, DVD Dual-Layer, CD-R/RW, Blu-Ray Optical Drive Solutions FireWire, USB2, eSATA
and the LaCie's > LaCie - LightScribe DVD±RW, Duplicators and Blu-ray - USB 2.0 & FireWire -
Hi,
My 2009 Mac mini doesn't boot anymore : all I get is a blank screen, I can't even chose to boot on the restoration drive.
From your experience, what do you think it could be linked with ? motherboard ? RAM ? It doesn't looke like a hard drive issue.
Thanks
BenoîtHello! I'm having, what sounds like, the same issue. Everything was working fine, until I ran a combined update, as prompted, for 10.8.2. After the normal reboot, the computer boots to a plain, white screen with no Apple. The computer is not responding to any keyboard command at startup, be it any of the reset commands, 'C' to boot to the optical drive, or option to select the startup destination. When pressing the Caps/Num lock keys, I notice that none of the LED lights will turn on on the keyboard. The piggybacked optical mouse is not showing it's red light from the bottom either. These tested fine on my MacBook Pro, however, and have always worked with the Mac Mini. Connecting and reconnecting the devices does not help. I know how to run all of the hard disk repairs, the permission fixes, etc., but it appears as though something is stopping my USB devices from being utilized (or even powered) at startup. I work in IT, and I support Apple computers every day (point being, I do know my stuff).
I opened the case and disconnected the hard drive from the logic board, thinking a potential hard disk issue is to blame. Upon restart, I still get the BONG (chime), but the machine will still not respond to any keyboard commands. Plugging in a USB stick that was created as a Mountain Lion boot device in Disk Utility with the InstallESD.dmg doesn't yield any results (as I am unable to 'tell' the computer to boot from it). The system disc that was packaged with the Mini is in the optical drive, but the Mini won't boot to that either. I'm at a complete loss. This is a 2010 model which was purchased new in December in that year. I'm using HDMI directly to an HDTV. The cable is working, the TV is working, the optical drive works in another machine, and the hard disc makes the necessary sounds (but not anything out of the ordinary).
To reiterate, this happened IMMEDIATELY after installing the combined 10.8.2 update. I am seeing a lot of posts about this issue, but no actual solutions. The dialogue seems to die somewhere after, "Reset the PRAM."
PLEASE ADVISE -
Mac mini doesn't do anything after startup
My early 2009 Mac mini doesn't allow me to do anything after booting. Once the desktop loads, anything I do causes a spinning beach ball to appear.
Important info: Hard drive has over 30Gb of free space, so that isn't an issue.
Help please!To be honest, I think it's over 60Gb of free space. The hard drive is either 320Gb or 360Gb.
I can't check
EDIT: I'm completely wrong, it has 112GB left of 320
Message was edited by: Ert00044 -
My new mac mini doesn't have upper dock?
My new mac mini doesn't have upper dock?
You appear to be confusing Macs and iOS devices. The Mac mini does not run on iOS 4, if new, it has Mac OS X 10.6.x Snow Leopard.
You should sort out the profile that you show so we know what devices you have with which proper OS and then be much more explicit about what the problem is. -
My Mac Mini doesn't start up when usb devices are plugged in.
My Mac Mini doesn't start up when usb devices are plugged in.
It just shows the "White screen of Death" when 1 or more usb ports are used.Haha. I just restarted it and it worked. Instead of turning it off and on. But thanks.
By the way:
Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
So I hope it is fixed for now. But could someone also post another solution? -
How do i burn to a song to a CD when my mac mini doesn't have a CD slot. qmedjohn
How do I burn a song to a CD when my mac mini doesn't have a CD slot. qmedjohn
Use an external optical drive such as Apple’s USB SuperDrive.
(125654) -
hello my mac mini didn't go into sleep mode when i am using an optical thunderbolt cable to my thunderbolt display
has any body els this problemHello josfromkerkade. Please contact me so that I can get more details.
We'd like to understand which monitor you're using, how old it is, which Thunderbolt port you're using (tethered cable or TB port), & the version of firmware.
[email protected]
Thanks, Mitch -
I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob
Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely -
I have mac pro and firefox 3.0.19
I am trying to download a video from youtube.?
I can see the video. I want to download it and save in my computer to see it again.
I have download helper. While the 3 red,blue,and yellow sphere are turning, It gives me the choice of place to save,and when I click and choose desktop , for example, this message comes ."Conversion requires an external application that appears to be missing on your system. Configure conversion ?
When I click on okay, another page comes, which says" converter and a box next to it . in the box is written FFMpeg. but I can change it to MEncoder. In another box, says configure conversion rules. When I click on it, nothing happen.Thanks for your help.
== This happened ==
Every time Firefox opened
== I want to download a video from youtubeNo, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key. -
Hi I have just bought a new Mac Book Pro 15" Retina display with 256 SSD and 8G RAM. I had my info transferred form my Previous Mac Book Pro late 2011 to this machine. When trying to download Mavericks it says it cannot be loaded onto this machine? Strange as I have just downloaded Pages, Numbers and Keynote...free? Thanks and Regards
BrianWelcome to Apple Support Communities
You already have got OS X Mavericks installed (the Keynote, Pages and Numbers versions available in the Mac App Store are only compatible with OS X Mavericks).
You have got a Late 2013 MacBook Pro, which uses a special OS X Mavericks version that is not available in the Mac App Store. This is the reason why the Mac App Store is not compatible with OS X Mavericks even if you are using it. This will be fixed in OS X 10.9.1, when your Mac uses the same Mavericks version as all other Macs.
Until then, you can reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718
Maybe you are looking for
-
Mailto form with spry validation won't open in IE
Hi, I've created a mailto: form using Spry validation fields and have two issues. 1. I create the form, transfer it to the webserver and the validation fields work. But when I reopen the form in Dreamweaver to make changes, an error window comes up
-
A Free Video Converter For Converting AVIs To Mov
i just got a macbook and im having trouble playing avis in frontrow and i was wondering what converter/codec should i download
-
About dynamically setting bind variable in LOV View
Hi, I have a LOV VO for an af:SelectOneChoice field in the page. The LOV is depended on an SQL statement in which there is a bind variable in the where clause. When I open the page, I set the bind variable by using VO.setNamedWhereClauseParam in the
-
Removing session/thread after client disconnect
I'm using blazeDS to stream data in a push-only sort of fashion so I'm using a StreamingAMFChannel. This channel is configured as such: <properties> <idle-timeout-minutes>1</idle-timeout-minutes> <max-streaming-clients
-
I currently have Lightroom 3.4.1, what is the best way to upgrade to 4.3?