Mac Mini dual monitors?

Hi Guys!
Can a brand new Mac Mini (latest edition) support 2 monitors, and if so how (what should i buy)?
** I have 2 brand new monitors with DVI cables.
Cheers!
I.

Marina,
I do not know the exact pixel resolution of my monitors, but I did connect my mac mini to two 24" monitors of different make and I still like the result. The "HDMI to DVI" adapter was supplied with the mini (server with 8GB RAM but I use it as a normal mac only, not as a files server). I bought the "Thunderbolt to DVI" adapter separately and I needed two DVI cables (one I found in the office, the other I had to buy). That was it. I tried to connect the second monitor directly using a HDMI cable but that had a downside. That monitor was not switched on and off by the mac via the HDMI cable. The HDMI cable is more suitable for TV connections. With the DVI cable that problem was solved.
I hope that this helps.
All the best and merry Christmas
Ueli

Similar Messages

  • 2014 mac mini dual monitor problem

    I just brought a mac mini (Late 2014) i have two displays monitors connected, one HDMI to DVI. and one thunderbolt to DVI. I can have both thunderbolts connected and the problem its the same, when back from sleep ,one monitor doesn't turn on. i have to disconnect one and then both work, it only happens when the mac goes to sleep. on cold restart or turning the mac on, this problem doesn't occur. any help.

    I have this same problem too. I purchased the Mac Mini with the intention of running dual monitors. I'm using the HDMI and mini-display/Thunderbolt to DVI. I've also tried MiniDisplay/Thunderbolt to HDMI and I'm experiencing the same problem as angelfromfullerton. Whenever it tries to wake from sleep, it can't decide on monitor arrangement and keeps flicking between the two, making the OS unusable and forcing a reboot... EVERY TIME. I've also experienced the issue once or twice on a cold boot. It doesn't matter which Thunderbolt port is used either.
    I'm going to have to return my Mac Mini unless this problem is fixed asap.
    Mac Min, OSX Yosemite (10.10).

  • Mac mini dual monitors setup

    Hi, i just got my mac mini and have placed the order for 2 Dell U2312HM monitors. I want to get the correct cables for the dual monitors setup before the delivery. Could any one comment if i got it right? Thanks. -Jason
    - Mini DisplayPort to DVI adaptor x 1
    - HDMI to DVI-D Cable x 1

    You have it right.
    Your monitor has:
    Full HD resolution, 1920 x 1080 at 60 Hz
    The 2012 mini supportds:
    supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

  • Advice: Mac Mini / Dual Monitors / PC Mac Configuration

    Hey Guys, need some advice for a semi-switcher friend.
    I have a business associate who has asked me the following questions and wanted some advice from the mac forum.
    My friend's background is as professional web site developer. He is currently using Windows XP with dual monitors.
    His boss is going to buy him a Mac Mini to work along side his PC. He wants to know what would work for dual monitor / PC / Mac Mini configuration.
    Here are his questions:
    "One, what do I need to do to run dual monitors on a Mac Mini since it doesn’t have another graphics card like my PC?"
    "And two, what is the best way to use my dual monitors with my Mac and PC? Should I trash the PC and use Bootcamp/Parallels or use something like a KVM switch since the Mac doesn’t come with a keyboard or mouse?"
    "I still need to be able to do testing with IE7 and Firefox (which I believe is different on a Mac than a PC), so that’s why I considered using Bootcamp or Parallels. (I prefer Parallels due to the rebooting of Bootcamp, but am wondering if I might experience any troubles otherwise and am better off with Bootcamp since it’s a Mac product and not third-party software. I’m neutral on this.)"
    Any help or suggestions would be welcomed.
    Thank you in advance.
    Mac Mini   Mac OS X (10.4.3)  

    There is one factor you might want to pass on to your semi-switcher friend in his consideration of a mac system.
    There's a subtle difference between MacOS and Windows that can significantly impact on how well a Windows user adjusts to the Mac, particularly when used to dual head operation. Windows attaches a menu to each and every window (and application) whereas MacOS does not. While a Windows user only has to navigate to the menu bar at the top of each window, a MacOS user has to navigate to the single menu bar along the top of the screen (or primary screen if on a dual head system.
    It's not a major issue, but for a pro used to simple and quick navigation off on the secondary display, having to navigate over to the top of the primary display to do something instead of quick flick up and done, there can be a small degree of frustration and a slight impact on workflow.
    I hasten to add that with those I have seen make this very transition, the effects were short lived, but it leads to the thought that where the Mac is concerned, it might be marginally better to go for a single widescreen display than dual head.

  • Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

    hi there guys,
    will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?
    I'm not sure if my machine is 64 bit - it is the current model base mac mini.
    Many thanks for any help you can offer !
    Simon

    SkiJumptoes is right. 4GB is not enough to comfortably run Logic X.
    Your Mac Mini will need DDR3 SODIMM RAM. That website seems incredibly steep though. I guess that's the price of finding it for you. You're better off going to any below:
    http://www.ebuyer.com/191206-kingston-4gb-ddr3-1066mhz-laptop-memory-kvr1066d3s7 -4g?utm_source=google&utm_medium=products&gclid=COqM6KzdxbgCFcfJtAodoicARg
    http://www.ballicom.co.uk/cmso4gx3m1a1600c11-corsair-value-select--memory--4-gb- -so-dimm-204pin--ddr3--1600-mhz--pc312800--cl11--15-v--unbuffered--nonecc.p87434 0.html?ref=5&gclid=CKyej_HdxbgCFQSS3godEjwAug

  • Mac Mini Dual Core vs PowerMac DP G4

    I am considering purchasing a Mac Mini Dual Core to replace my PowerMac DP 1.25Ghz G4 . I'm worried whether I will be happy , and if it will be faster than my G4. The app's I run most are univeral binary or will be soon , so I'm thinking , yes. But I would feel more comfortable if I could get some solid input from some power Mac user's experienced or knowledgeable with the new Mac Mini
    PowerMac DP 1.25 Ghz , 1.5GB RAM   Mac OS X (10.4.5)   Dual 80GB Seagate Barracuda drives

    I can't imagine that an Intel Mac mini would ever be "faster" than a dual-processor G4 tower for most operations. The comparisons that Apple advertises, like "4X faster" are all against single-processor PowerPC Macs. Mac OS X does a good job at managing dual PowerPC processors.
    Although the new Intel Mac mini now has a faster system bus, you're MUCH more limited by the use of portable-size hard drives (for example, your PowerMac probably has over a 100GB drive to start with and could have 500GB without much cost). If you want to max-out the RAM on the new Intel Mac mini to 2GB, it will cost you $300 more. So, a 1.66GHz Core Duo Mac mini with a 120GB hard drive and 2GB of RAM is $1,224.00 (US). If I were you, I would, without question, keep the PowerMac and invest in a newer Super Drive and/or hard drive(s) before giving it up.
    -Doug

  • Mac mini Dual core vs. G4 500MHz Dual tower w/ non native applications

    I have a Power Mac G4, Dual 500MHz. I wanted to upgrade to the G5 tower, but am getting concerned that I will be buying an obsolete computer as Apple migrates to Intel. I use Microsoft Office and Adobe's Creative Suite 2 (CS2) primarily on my G4 and am really tired of the slow performance. I was thinking of buying the new Mac mini dual core and add an additional 7200 RPM external Hard Drive to improve the drive performance until the new Intel towers come out. I know that the applications I use are not written for the Intel processor. Does anyone know how well these applications perform on the Intel mini vs. my old old G4?

    In a year or so, there will probably still be more PPC Mac users than Intel ones, and I doubt that any smart company will end support for PPC Macs that early. Apple provided developers with a way to create Universal Binaires for two reasons : to avoid the confusion introduced by two versions (PPC & Intel) of the same app, and to force (i.e. strongly encourage) developers to support both platforms for quite some time.
    There's no doubt that a PowerMac G5 will run Leopard (Mac OS X 10.5), and probably the following version too. CS3 will be Universal, and will thus run at full speed on both PowerPC and Intel-based macs, and there's a chance that CS4 could be Universal too. If you buy a PowerMac now, it probably won't be outdated before three years or more.
    While the Intel Core Duo is much faster than a G4 and quite a bit faster than a single G5, I think that a Dual G5 could be about as fast as they are (maybe a bit slower "per-gigahertz", but Core Duos don't reach 2.3/2.5 Ghz yet anyway) ...
    Regarding the fact that Office runs well under Rosetta but not CS2, that's because CS2 is a much more demanding suite of applications, which probably features a lot of AltiVec code (software sepcifically optimized for the G4/G5's Velocity Engine - which wasn't originally supported by Rosetta and now is, but translating PPC code into Intel x86 isn't fast, so translating code that's supposed to run very close to the processor itself must cause an even grater performance loss). Even though Photoshop probably won't run slower than on your dual 500 Mhz, it probably won't run much faster, so if you don't want to get a PPC Mac, then I suggest that you keep your G4 for now and wait until Apple releases the next generation of PowerMacs.
    On the other hand, one of the reasons why your G4 is slow with Photoshop could be because you don't have enough RAM. Most people who have used the latest version consider that 512 MB is a minimum, and 1 or 2 GB are recommended. If you only have 256 MB or so in your Mac, why don't you just add some memory and wait until the next PowerMacs ?

  • Mac Mini DVI Monitor Problems

    Hi all,
    I'm running OSX10.8.5 on a Mac Mini 2.5 GHz Intel Core i5 with 4 GB 1600 MHz DDR3 memory and Intel HD 4000 512MB graphics.
    I've just upgraded my monitor from a VGA 17" to an AOC E2462VWH 24" monitor, plugged into my computer via DVI with a Thunderbolt adaptor.
    In a normal boot-up, the monitor displays video for a split second and then cuts to black. The picture works fine in Safe Boot mode but video is jerky, everything loads slower, I can't play .mov files (Quicktime tells me unknown error -101) and there is an annoying flicker every 10 seconds. The fact the monitor works fine in Safe Boot suggests to me the problem is software. Resolution is set to 1920 x 1080 @ 60Hz and OSX is not letting me change that via Settings.
    I went searching for drivers only to lean it sounds like OSX deals with monitors in a plug-n-play format. Is this true?
    Firstly, can I confirm my mini has the power to drive this monitor?
    Besides that, can you please help me figure out how to boot this computer so the monitor displays in normal boot-up mode?
    Thanks for your help!

    Then it sounds like yo need one of these:
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter

  • Mac mini dual display - blue screen flashes frequently

    I recently purchased a mac mini i7 model, with fusion drive.
    I have upgraded the RAM to 16GB.
    I have also purchased 2 monitors, both are LG 22EA63V LED.
    I connected one monitor direct HDMI to HDMI.
    The other monitor is connected from Thunderbolt to HDMI.
    Everything worked amazingly well for the first few weeks. Now, not so much....
    I frequently have the screen freeze and flash blue, and then resume as normal dual display mode.
    Other times the screen will flash blue and then come back as a single display. In this case the Thunderbolt to HDMI display appears as primary display, while the HDMI display loses connection.
    If I unplug the HDMI display completely, the blue screen flashing does not happen at all.
    So, what could be causing this problem, and how do i fix it?

    Hi Matt,
    See if there's some setting on the HDMI monitor for Input Source, or things like Auto-tune.

  • HT201173 mac mini poor monitor resolution

    I bought my mac mini today. I connected using the DisplayPort <-> VGA cable to my HP LP2065 monitor. I have been using this monitor for my Windows XP which used to give me 1600x1200 resolution.
    But with Mac mini I only get maximum reolution of 1400x1050, which is low and the whole experience of Mac is poor.
    I have used the same monitor with various version of Linux flavours. But normally I get it working after installing some NVIDIA drivers. Is there similar thing in Mac world?
    Thanks and Regards,
    Janardan

    Were normally stuck with the graphic drivers Apple gives us, but the new Minis have Intel Graphics only...
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    768 MB*
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html
    No idea why you only get a low rez, could it be the cable?

  • Mac Mini dual core or Mac Mini quad core server for normal use ?

    Hello
    I am looking to replace my desktop work computer from my 2011 i7 quad core 2.0 MBP for a Mac Mini because it was actually made for desktop use and my minidisplayport - dvi adaptor just broke ( I think because to many unplugs and plugs from the laptop to the monitor ) .
    I work in Photoshop, Dreamweaver, Aptana, Netbeans, open 20 + tabs in chrome, firefox so I need a bit of performance
    I have no use for Mac OSX Server, I just want to be at least as fast as my MBP. I can see that the 999$ Mac mini has the same processor as my MBP ( 2.0GHz quad-core Intel Core i7 ) but no dedicated video card. Also, the 800$ Mac mini has a video card BUT just a dual core - 2.5GHz dual-core Intel Core i5 .
    What do you think I should get ? I don't play games, I have windows for that anyway. Would the dedicated video card make much of a difference ? ( does photoshop or mac use it much - openCL etc. )
    Thanks!

    You might also consider the Apple only available Mini
    which has a 2.7 GHz i7 dual core which has dedicated
    graphics. Also, all the 2011 i7 processors (Sandy Bridge)
    are hyperthreading.
    As for dedicated graphics, they are really only needed
    for high end gaming or 3D rendering apps.  It will
    make no difference with the software that you mention,
    as they are more CPU intensive.

  • LE 9.0 performance on Mac Mini (dual core) Vs. iMac (quad core)

    I am in the process of evaluating options to replace my 2007 MBP with a faster DAW. I am on a budget so while I am looking for performance improvements over what I have, I don't need overkill either. I am considering the 2011 Mac Mini (2.5 GHz, dual core) and the 2011 iMac (2.5 GHz quad - core). Whichever configuration I choose, I will bump up RAM to 8 GB.
    I use LE 9.0 and a Presonus Firestudio Project and would like to know whether what kind of performance improvements I will see between the two options I am considering. I use a lot of plugins, and an external Firewire 800 drive for recording. Obviously with the Mini, I will have to buy an optical drive as well. I already have two monitors, keyboard and mouse.
    The only thing that worries me about the Mac Mini is the slower 5400 rpm hard drive. While I plan on using an external drive for recording, I am concerned because of the number of plugins and sample files that need to load during recording / playback.

    I am in the process of evaluating options to replace my 2007 MBP with a faster DAW. I am on a budget so while I am looking for performance improvements over what I have, I don't need overkill either. I am considering the 2011 Mac Mini (2.5 GHz, dual core) and the 2011 iMac (2.5 GHz quad - core). Whichever configuration I choose, I will bump up RAM to 8 GB.
    I use LE 9.0 and a Presonus Firestudio Project and would like to know whether what kind of performance improvements I will see between the two options I am considering. I use a lot of plugins, and an external Firewire 800 drive for recording. Obviously with the Mini, I will have to buy an optical drive as well. I already have two monitors, keyboard and mouse.
    The only thing that worries me about the Mac Mini is the slower 5400 rpm hard drive. While I plan on using an external drive for recording, I am concerned because of the number of plugins and sample files that need to load during recording / playback.

  • Initial setup using mac mini without monitor

    Hello,
    I want to start the install of my new purchased mac mini with snow leopard server without connecting (or need to buy) it to a monitor to see what is going on.
    I know that AFTER the initial start up/install, I would activate Screen Sharing in the Sharing preference pane from my other mac (macbook pro - Leopard).
    My question is, how can I install the server version and see what is going on without attaching a physical monitor to it the first time?
    Thanks
    Lawrence

    I was hooping I can just ssh to it or connect it to somehow via command line, start the basic install and set up the screen sharing. After this I can connect to the server via screen share...
    We don't have the monitors.

  • Mac Mini 2011 - Monitor Problems - Help

    My picture is not sharp... just blury. Icons, pictures, text, mostly everything is bad except high quality video files.
    I just purchased a Mac Mini 2011 second option and a Samsung TA531 monitor that arrived today. Hooked it up and to my surprise, it is blury and bad quality no matter what kind of resolution i use. I also try to text smoothening through terminal.. nothing helps.
    My setup:
    Mac Mini 2011 - second option stock
    Samsung SyncMaster T27A531
    Cable: HDMI
    After reading about this issue, some people recommends to use a DVI or VGA cable and claims that HDMI is not suitable for computer monitors, especially Samsung.
    Please, feel really sad and lost among a lot of new computer equipment that doesn't work properly

    I had the same issue and didn't want to give up my Thunderbolt port, so I opted to get a Gefen HDMI Detective Plus. What this does is make the CPU think an HDMI display is attached so that your graphics CPU 'unlocks' and full speed is back. The Gefen box can either 'learn' the code of any HDMI display in your office/home, or you can preset it as a stock 1080p display. TOTALLY solved my problem... even though it did cost $85.
    Apple needs to fix this as so many people use the MINI headless.
    http://www.gefen.com/kvm/ext-hdmi-edidp.jsp?prod_id=8005

  • My mac mini & samsung monitor 172V don't work together

    I bought a mac-mini and connected it to my samsung monitor 172V.
    On screen the words " video mode not supported" appears. What does it mean? What can I do to make it work?

    It should be compatible...I think that means your refresh rate is wrong.
    First try this... turn on the computer... unplug the monitor AND the little DVI adapter ... plug the monitor into the DVI adapter ... then plug them both into the computer. It should auto refresh and fix it.
    If not: Do you have a second monitor or another computer with remote desktop?
    Try changing your resolution /refresh rate with a different monitor, then plugging in the new one.

Maybe you are looking for