Mac Mini - Dual Screen (Keynote Presentation)

Is it possible to set up a Mac mini to use a iWork Keynote presentation with two screens, one showing a primary display and one a secondary display with presenter notes?

Yes I use a "new" mac mini and have dual dsplay setup
I did do my final Bachelor presentation on this very mac mini and keynote, took the mac with me to university, andused the screen and the beamer, had the keynot dual display setup, everything worked like a charm. I had to buy quita a bit of adaptors dor DVI and VGA, but now I am set.

Similar Messages

Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

hi there guys,
will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?
I'm not sure if my machine is 64 bit - it is the current model base mac mini.
Many thanks for any help you can offer !
Simon

SkiJumptoes is right. 4GB is not enough to comfortably run Logic X.
Your Mac Mini will need DDR3 SODIMM RAM. That website seems incredibly steep though. I guess that's the price of finding it for you. You're better off going to any below:
http://www.ebuyer.com/191206-kingston-4gb-ddr3-1066mhz-laptop-memory-kvr1066d3s7 -4g?utm_source=google&utm_medium=products&gclid=COqM6KzdxbgCFcfJtAodoicARg
http://www.ballicom.co.uk/cmso4gx3m1a1600c11-corsair-value-select--memory--4-gb- -so-dimm-204pin--ddr3--1600-mhz--pc312800--cl11--15-v--unbuffered--nonecc.p87434 0.html?ref=5&gclid=CKyej_HdxbgCFQSS3godEjwAug

Mac Mini Dual Core vs PowerMac DP G4

I am considering purchasing a Mac Mini Dual Core to replace my PowerMac DP 1.25Ghz G4 . I'm worried whether I will be happy , and if it will be faster than my G4. The app's I run most are univeral binary or will be soon , so I'm thinking , yes. But I would feel more comfortable if I could get some solid input from some power Mac user's experienced or knowledgeable with the new Mac Mini
PowerMac DP 1.25 Ghz , 1.5GB RAM Mac OS X (10.4.5) Dual 80GB Seagate Barracuda drives

I can't imagine that an Intel Mac mini would ever be "faster" than a dual-processor G4 tower for most operations. The comparisons that Apple advertises, like "4X faster" are all against single-processor PowerPC Macs. Mac OS X does a good job at managing dual PowerPC processors.
Although the new Intel Mac mini now has a faster system bus, you're MUCH more limited by the use of portable-size hard drives (for example, your PowerMac probably has over a 100GB drive to start with and could have 500GB without much cost). If you want to max-out the RAM on the new Intel Mac mini to 2GB, it will cost you $300 more. So, a 1.66GHz Core Duo Mac mini with a 120GB hard drive and 2GB of RAM is $1,224.00 (US). If I were you, I would, without question, keep the PowerMac and invest in a newer Super Drive and/or hard drive(s) before giving it up.
-Doug

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

Mac mini Dual core vs. G4 500MHz Dual tower w/ non native applications

I have a Power Mac G4, Dual 500MHz. I wanted to upgrade to the G5 tower, but am getting concerned that I will be buying an obsolete computer as Apple migrates to Intel. I use Microsoft Office and Adobe's Creative Suite 2 (CS2) primarily on my G4 and am really tired of the slow performance. I was thinking of buying the new Mac mini dual core and add an additional 7200 RPM external Hard Drive to improve the drive performance until the new Intel towers come out. I know that the applications I use are not written for the Intel processor. Does anyone know how well these applications perform on the Intel mini vs. my old old G4?

In a year or so, there will probably still be more PPC Mac users than Intel ones, and I doubt that any smart company will end support for PPC Macs that early. Apple provided developers with a way to create Universal Binaires for two reasons : to avoid the confusion introduced by two versions (PPC & Intel) of the same app, and to force (i.e. strongly encourage) developers to support both platforms for quite some time.
There's no doubt that a PowerMac G5 will run Leopard (Mac OS X 10.5), and probably the following version too. CS3 will be Universal, and will thus run at full speed on both PowerPC and Intel-based macs, and there's a chance that CS4 could be Universal too. If you buy a PowerMac now, it probably won't be outdated before three years or more.
While the Intel Core Duo is much faster than a G4 and quite a bit faster than a single G5, I think that a Dual G5 could be about as fast as they are (maybe a bit slower "per-gigahertz", but Core Duos don't reach 2.3/2.5 Ghz yet anyway) ...
Regarding the fact that Office runs well under Rosetta but not CS2, that's because CS2 is a much more demanding suite of applications, which probably features a lot of AltiVec code (software sepcifically optimized for the G4/G5's Velocity Engine - which wasn't originally supported by Rosetta and now is, but translating PPC code into Intel x86 isn't fast, so translating code that's supposed to run very close to the processor itself must cause an even grater performance loss). Even though Photoshop probably won't run slower than on your dual 500 Mhz, it probably won't run much faster, so if you don't want to get a PPC Mac, then I suggest that you keep your G4 for now and wait until Apple releases the next generation of PowerMacs.
On the other hand, one of the reasons why your G4 is slow with Photoshop could be because you don't have enough RAM. Most people who have used the latest version consider that 512 MB is a minimum, and 1 or 2 GB are recommended. If you only have 256 MB or so in your Mac, why don't you just add some memory and wait until the next PowerMacs ?

After plugging my ipod into my mac mini, my screen split into 2 duplicate screens, one on top of the other. How do i make that go away?

after plugging my ipod into my mac mini, my screen split into 2 duplicate screens, one on top of the other. How do i make that go away?

I am not sure about everything, but there is something that may fix some of your problems. Go to System Preferences, and choose the "Universal Access" preference pane. In Universal Access, turn off VoiceOver, Zoom (seeing tab), Sticky Keys, Slow Keys (Keyboard tab), and Mouse Keys (Mouse tab). Make sure the "Enable access for assistive devices" checkbox, which is at the bottom of the preference pane. From there, look at other options and see if they are things you want turned off, or changed from how they are set. If you don't know what different options do, click on the help icon at the bottom left corner of the window. And if you are still baffled, ask here and someone will tell you what it does.
If you use any of the universal access options or think they could be useful, feel free to leave them on.
Also, go to the Keyboard and Mouse preference pane, choose the Keyboard Shortcuts tab, and make sure there are no strange keyboard shortcuts set that may interfere with the keys you are having issues with.
Did you install any new software before this started happening, and if so, how many days before it started happening?
Let us know if these tips get you anywhere.

Mac mini dual display - blue screen flashes frequently

I recently purchased a mac mini i7 model, with fusion drive.
I have upgraded the RAM to 16GB.
I have also purchased 2 monitors, both are LG 22EA63V LED.
I connected one monitor direct HDMI to HDMI.
The other monitor is connected from Thunderbolt to HDMI.
Everything worked amazingly well for the first few weeks. Now, not so much....
I frequently have the screen freeze and flash blue, and then resume as normal dual display mode.
Other times the screen will flash blue and then come back as a single display. In this case the Thunderbolt to HDMI display appears as primary display, while the HDMI display loses connection.
If I unplug the HDMI display completely, the blue screen flashing does not happen at all.
So, what could be causing this problem, and how do i fix it?

Hi Matt,
See if there's some setting on the HDMI monitor for Input Source, or things like Auto-tune.

Advice: Mac Mini / Dual Monitors / PC Mac Configuration

Hey Guys, need some advice for a semi-switcher friend.
I have a business associate who has asked me the following questions and wanted some advice from the mac forum.
My friend's background is as professional web site developer. He is currently using Windows XP with dual monitors.
His boss is going to buy him a Mac Mini to work along side his PC. He wants to know what would work for dual monitor / PC / Mac Mini configuration.
Here are his questions:
"One, what do I need to do to run dual monitors on a Mac Mini since it doesn’t have another graphics card like my PC?"
"And two, what is the best way to use my dual monitors with my Mac and PC? Should I trash the PC and use Bootcamp/Parallels or use something like a KVM switch since the Mac doesn’t come with a keyboard or mouse?"
"I still need to be able to do testing with IE7 and Firefox (which I believe is different on a Mac than a PC), so that’s why I considered using Bootcamp or Parallels. (I prefer Parallels due to the rebooting of Bootcamp, but am wondering if I might experience any troubles otherwise and am better off with Bootcamp since it’s a Mac product and not third-party software. I’m neutral on this.)"
Any help or suggestions would be welcomed.
Thank you in advance.
Mac Mini Mac OS X (10.4.3)

There is one factor you might want to pass on to your semi-switcher friend in his consideration of a mac system.
There's a subtle difference between MacOS and Windows that can significantly impact on how well a Windows user adjusts to the Mac, particularly when used to dual head operation. Windows attaches a menu to each and every window (and application) whereas MacOS does not. While a Windows user only has to navigate to the menu bar at the top of each window, a MacOS user has to navigate to the single menu bar along the top of the screen (or primary screen if on a dual head system.
It's not a major issue, but for a pro used to simple and quick navigation off on the secondary display, having to navigate over to the top of the primary display to do something instead of quick flick up and done, there can be a small degree of frustration and a slight impact on workflow.
I hasten to add that with those I have seen make this very transition, the effects were short lived, but it leads to the thought that where the Mac is concerned, it might be marginally better to go for a single widescreen display than dual head.

New 2012 Mac mini having screen resolution problem when I connect to either 27" LG or 22" Hannspree monitor. Tried mini display port to VGA/HDMI and HDMI to DVI-D cables... all same isse

New 2012 Mac mini having issues in connecting to third party Monitors. Connected my mac mini to a 27" LG monitor. Text looks blurred. Tried connecting to the monitor using 3 options. 1) mini port to HDMI, then HDMI cable to LG monitor. 2) Mini port to VGA, then VGA cable to monitor 3) HDMI port on mini mac to DVI-D cable then DVI to DVI cable... In all cases text is not clear. Anyone has similar issues with latest mini mac. The monitor works fine when I connect to a windows 7 Samsung laptop. Any input is highly appreciated. Thanks in Advance

Why do you use always 2 cables? There's a lot that can go wrong.
1.) Hardware:
- Use only one cable, best an HDMI->HDMI cable. It doesn't need to be an expensive one, they've proven to be no worse than those "esoteric", expensive ones.
- Set the monitor to the HDMI input.
- The modes you are listing are only "picture modes" changing color/brightness/contrast settings, not resolution or the likes, so pick the one you like best later, or enter your own settings under Custom.
2.) OS X:
- Usually the Mac detects the screen itself and chooses the best settings, so by default you need to do nothing than make a proper hardware connection to get a decent image.
- However, there have been issues with new Mac Minis and particularly their HDMI ports. But reportedly they have been fixed with a software update. So, launch the App Store and check under Updates if there is one for you to install. If so, do it; otherwise you should be good to go.
- If you require, go to System Preferences -> Displays. In the Dispaly tab, by default, "Best for display" should be selected, and that is typically true. If you want, select "Scaled" and 1920x1080, plus a frequency from the list (where higher is usually better, but just pick the one that works best for you). If you can't see a change to the better, you best go back to "Best for display".
- If you are not happy with the colors on your screen, you'll find eventually more than one choice in the Color tab, though your particular screen should be in the list and its Display Profile should get you the best result. (Double-check picture modes on your display: if you're far off there, you won't make it much better with the Mac's settings).

Mac Mini 2011 screen blacks out during heavy screen activity

I have a Mac Mini 2011 i5 2.3Ghz with Intel HD video. It's connected to a 30" LCD 2560x1600 (Dell WFP3008) via mini-DP to DP cable and a 22" LCD 1920x1080 (Samsung LCD TV) via HDMI to HDMI cable.
For the first few weeks I had it connected to the 30" only and it was fine. Then I hooked up the Samsung as a second display and the problems started.
The problem is that the Dell blacks out briefly, then comes back. It is not "drawing" the screen black, the signal to the Dell gets disrupted momentarily so the monitor has no signal so it goes black. Then it resyncs with the signal and the display is back. This only happens to the Dell, during the disruption, the Samsung image stays put. I know it is a signal disruption because the Dell shows a displayport icon showing that it has just resynced to that input.
The problem happens more frequently when more things are going on; like if I have a window or multiple windows playing video, then the disruption happens more. If I disconnect the Samsung, it happens less. It could even happen if a web browser window taking up a large portion of the 30" screen does a full page update, it will disrupt. If I am running Adobe Lightroom, it seems to happen more also.
When it happens it seems like messages like this appear in the console, although i can't say they are directly correlated:
6/1/12 8:28:46.000 PM kernel: IOSurface: buffer allocation size is zero
I'm thinking perhaps the mini is running low on memory since the 2560x1600 is pretty high res and then add the 1080p screen and stuff being updated, perhaps it runs out of memory and disrupts the signal while it garbage collects? Pure speculation.
Has anybody else seen this and have any clues on how to resolve it? Thanks.

I should clarify that when I say perhaps the mini is running low on memory, I mean low on shared video memory, since the computer has 16GB installed. I'm not sure how to view or test shared video memory allocation.

2012 Mac Mini blank screen on wake from sleep in Mavericks

I just upgraded from Mt Lion to Mavericks and now my Mac Mini does not awake properly from sleep when I press a key on the keyboard. It stays dark but I can type in my password even when I can't see the input space and then hit the return and it then the screen functions normally. I have reset my SMC, zapped PRAM, ran Disk Utilities and DiskWarrior so I think I am covered on these. I have a Asus monitor connected by HDMI. Not sure what else to try. I see the problem surfaces occasionally for other versions of OS X and for a variety of Macs. Thanks. Doug

Okay so here is more info as I have been experimenting with this.
Actually my second post is incorrect. It does stay blank if I put it to sleep but here are the observations:
My Asus 247 monitor upon sleep will go blank and then after a few seconds will show a window saying no HDMI input detected then be blank. The screen light changes from blue to amber at this point.
Once it is amber and I try to wake the Mac Mini, the light will change back to blue and the monitor displays a message saying HDMI input detected. Then it stays blank but I can see my cursor in the corner and it displays on the blank screen. I can move it around normally.
If at this point I turn off the monitor and turn it back on, the screen comes back to normal and I can type in my password and go from there.
In another case if the screen is blank, I can type my password in and then when I hit enter, it is functioning correctly.
I did not have this problem at all in Mt. Lion and nothing else has changed.
Any help/insights would be greatly appreciated. Thanks.

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

2014 mac mini dual monitor problem

I just brought a mac mini (Late 2014) i have two displays monitors connected, one HDMI to DVI. and one thunderbolt to DVI. I can have both thunderbolts connected and the problem its the same, when back from sleep ,one monitor doesn't turn on. i have to disconnect one and then both work, it only happens when the mac goes to sleep. on cold restart or turning the mac on, this problem doesn't occur. any help.

I have this same problem too. I purchased the Mac Mini with the intention of running dual monitors. I'm using the HDMI and mini-display/Thunderbolt to DVI. I've also tried MiniDisplay/Thunderbolt to HDMI and I'm experiencing the same problem as angelfromfullerton. Whenever it tries to wake from sleep, it can't decide on monitor arrangement and keeps flicking between the two, making the OS unusable and forcing a reboot... EVERY TIME. I've also experienced the issue once or twice on a cold boot. It doesn't matter which Thunderbolt port is used either.
I'm going to have to return my Mac Mini unless this problem is fixed asap.
Mac Min, OSX Yosemite (10.10).

Mac mini dual monitors setup

Hi, i just got my mac mini and have placed the order for 2 Dell U2312HM monitors. I want to get the correct cables for the dual monitors setup before the delivery. Could any one comment if i got it right? Thanks. -Jason
- Mini DisplayPort to DVI adaptor x 1
- HDMI to DVI-D Cable x 1

You have it right.
Your monitor has:
Full HD resolution, 1920 x 1080 at 60 Hz
The 2012 mini supportds:
supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).

Mac Mini Dual Processor?

I was told by a salesman at the guitar center that I could hook my mac mini G4 to a powermac G5 to boost the speed a bit. I don't really know how I'd do that, but my question is, if that's possible could I hook up a Mac MIni G4 to another one of the same speed and make that a dual processor set up...??
Mac Mini Mac OS X (10.3.9)

To my knowledge, there is (unfortunately) nothing as simple as that.
Still It should be "doable" to connect two macs to share their capabilities, but, due to the power used to run the process, you certainly won't end up with the power and ease of use of a dual processor machine...

Mac Mini - Dual Screen (Keynote Presentation)

Similar Messages

Maybe you are looking for