Mac Mini envelopes printing full page size from contacts

Good day.
So here’s my story.
In early summer I printed out enveoples form "Address Book" for our wedding invitations from a Macbook pro 2.16 GHz running 10.6.8. Everything worked out perfectly.
I then got a Mac Mini 2.7 GHz Core i7 for a wedding gift and I did a data migration from my Macbook Pro to the mac Mini. It was running 10.8.5 and is now running the latest version or Maverics. The printer I used for both envelope printing jobs, an HP CM1415fnw color MPF has also been updated to the latest software version.
The problem I am having is that the Mac mini will NOT print envelopes in the custom envelope size, it always prints full page. It has done this since the data migration form the Macbook Pro running "Address Book" to the Mac Mini 10.8 running "Contacts". I thought is was an operating system issue so I waited for the new OS Maverics. I did another print out from both computers tonight to see if the issue had resoleved it's self. NOPE. I even do a print preview on the mini which loads up Preview and it shows the custom size, though it prints out full page
All settings on both computers are the same for the custom envelope size.
Anyone know how I can fix the paper size issue?
Thanks for anyhelp I get
~rodger
Label from MacBook Pro
Label form Mac Mini
Layout from MacBook Pro
Layout from Mac Mini
Orientaion from Mac Mini
Orientation from MacBook Pro

Hi Rodger_
Thank you for the additional information, it was helpful.
I was speaking with one of my colleagues and we would like you to try the following steps. Once you have completed the steps please try printing again.
1)    Please reset your printing system, I have included a document on how to do this. Please be aware that this reset deletes all print settings and pending print jobs from your Mac.
2)    In the "Printers & Scanners" please click on the '+' and choose "Add another printer or scanner from the options (see screen shot)
3)    Choose your Laserjet CM1415fnw and at the bottom where it says "USE" please change it to the HP Laserjet (see screen shot) instead of AirPrint
Happytohelp01
I work on behalf of HP

Similar Messages

OfficeJet 8600 doesn't print full page range from pdf with Mac OS X

I have an OfficeJet Pro 8600 linked to a Mac with OS X Mavericks
We often need to print a block of pages (say the first 40, or 10-20 out of the middle) out of large pdf documents of 250pg or more. To do so we put in the page range under 'pages' in the print instructions box.
The printer sometimes prints an initial block of pages, then cuts off. If we then try to print the remaining pages, it starts by printing the whole range again, with the ones we already have, and then still cuts off maybe after having done 2-3 more than the first time round. To print the whole range we've eventually had to print the last pages one at a time.
Any suggestions as to why this is happening, and how we can stop it? It happens with documents in Adobe Reader and web pages.
Thanks for any assistance.

Hi @NickRN8
I am not sure what is causing the inconsistency in selected pages not printing, but I'd be happy to help.
Let's reset the printing system, repair disk permissions, re-add the printer using the right driver, and try to scan again.
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer driver
I look forward to hearing from you. If the issue remains unresolved, I will post instructions to completely scrub the HP software from the computer and start fresh.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Print by choosing paper source by PDF page size from MAC

I have an iMAC with Maverick OS. I am printing to both an HP 401 monochrome laser printer and an HP Laser Jet Pro CM1415fnw Color Printer. I receive .pdf files which contain both letter and legal sized pages. I know that I cannot print out letter and legal size pages by selecting "choose paper source by PDF page size" from my MAC. This does present a problem for me (and I'm sure many others). What I would like to know is 1) is there a way around this problem and 2) are there any plans for Adobe to address a resolution to this issue by fixing the option so that MAC users can achieve the same level of ease of print results as Window users? There is certainly a large segment of the population who are now MAC users. Thank you.

Thanks for the suggestion, Steve. I did go to that link and asked the same
information of Adobe directly. Their NB at the bottom of the page says
that due to the large number of questions asked and information requested,
they usually do NOT respond to the users. Too bad. How else are we
supposed to get valid info? I believe almost all the other software
vendors do have a contact location from which they will address user's
concerns and will contact you with some kind of info. Welcome to the new
world of customer service!! i.e., Go figure it out by yourself!!
Mitch
M. Mitchell Gordon
[personal information removed by moderator]

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Te

In MAC, I want to change document size from 8.5X11 to 18X24 to create a poster to print through Staples. I created the doc originally in WORD, changed the size in WORD, converted to PDF doc. But PDF doc is still in 8.5X11. Read ADOBE support help info. Terls me to change size in application rather than printer. BUT ACROBAT Pro does not give me a page set up option in FILE. I can only find one in the printer dialog box. Help!

from the FAQs on Staples website:
I have a file that I know is a PDF, but the website claims it is not in a PDF format. What should I do?
Check to see that the file has the .PDF extension. Also, check that the filename does not have any special characters such as an ampersand (“&”).
Regarding your measurements set to centimeters rather than inches; is it just in MS Word?
Or does it occur in all other applications.
Check your Work preferences first:
If it is happening in all your applications, check your Mac OS System Preferences.

Officejet Pro L7680 won't print full Page from Win 8.1

Installed driver for this printer on a 64bit Dell XPS running 8.1. The data on the computer says the installation is satisfactory.
The printer printed a full page fax report and self diagnostic page. But when prining a full page from Word, or the internet it will only print about half a page. then it may stop, or it may print a series of pages with a few characters on them. The print queue says that all of the data has been transmitted to the printer. It will print a full page with little content, like a row of x's at the top of the page, a row in the middle, and a row at the bottom. It also prints a full page from excel if the spreadsheet contains only a small amount of data. The same printer prints, faxes, and scans satisfactorily from an older computer running XP. What can I do to the driver to have it print full pages? Printer model no is C8189A, serial No {Personal Information Removed}

I have same problem, hope someone answers.

Can't print full page from apple home computer.

When using tynet website to fill out my paperwork from home on apple computer, firefox does not print full page. It prints about 3/4 of page.

Does Firefox cut off the text that isn't in the other part of the page, or does it overly shrink the content to fit in the smaller rectangle? In the latter case, check out: [http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page].

Change Printer Default Page size to A4 from Letter in Firefox

Firefox overides printer default page size every time I print. I need Firefox to print to A4 but it automatically sets the Page size to Letter. I have to manualy change the size each time I print.
There are no options in Firefox to change this setting permanently. I am running the latest version of Firefox on Windows XP.
In control panel the default page size is set to A4 which Internet Explorer and other applications use correctly.
Thanks,

I solved it! For anyone having a similar problem try this.
Change the default printer, choose another one.
Change something in that printer and close firefox.
Reopen firefox and choose yet another printer (not the first one).
Change something in that printer and close firefox again.
Reopen firefox and choose the first printer. Select A4 as default paper and close firefox one last time.
Reopen firefox and the problem should be gone. Weird, innit?

Officejet 150 wont print full pages in Word

Officejet 150 Mobile misses printing parts of a page of text in Word 2007. I created several lines of text and it simply won't print them all. I then filled an entire page with Ariel, size 11 font. It skipped printing every third line. I repeated this with a larger font and it cut the text, horizontally, along the same width lines. Did the same thing in Corel WordPerfect X4 with the same result. Ditto in Avery Design & Print. It won't print entire 3/4" sections across the page. I've uninstalled drivers/printer, rebooted, etc., several times to no avail. Print Doctor keeps saying device is busy but it's not. No print jobs in que, printer was cycled on and off (several times).

Hey @dmartin05,
Welcome to the HP Support Forum.
I understand your HP Officejet 150 Mobile All-in-One Printer won't print full pages from specific word processing programs. I would like to help.
I recommend you try the following steps so we can determine whether this is most likely a hardware versus software issue:
From the front panel of your printer, make a black copy of an ordinary full-page text document. Does the partial page/print quality issue persist?
Next, touch Setup / Reports/ and Print Quality Diagnostic. How does the Print Quality Diagnostic from your printer compare to the report highlighted in the following link?:
HP Officejet 150 Mobile All-in-One Printer Series (L511) - Troubleshooting Print Quality Issues
If you were able to make a decent copy of a text document, and your Print Quality Diagnostic Report printed without any discernible issues then we can safely assume the issue is software related. If that's the case, please respond to this post and I'll be happy to provide further troubleshooting suggestions.
If you find it's the opposite and there are print quality issues from the front panel, treat this as a hardware issue and follow the troubleshooting steps provided in the above-linked article.
Best of luck - have a great weekend!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Unable to print full page to 1 specific printer while other computers can.

I have 1 computer (Windows 7, 64 bit) which is unable to print full page to a Xerox Phaser 7760GX. I have other computers (Windows 7 64 bit and Mac OSX Mavericks) which are able to print perfectly fine to the same printer. This only happens in Adobe Acrobat XI Pro, not in other software I have tested. The same PDF's also print to other printers without problem.
So far I have:
Re-installed drivers (including the Xerox Generic Drivers)
Set it to print as image (which makes it full screen, but also greyscale)
What happens when I try to print normally, is assume the page is portrait. It will print it landscape, on the right side of the page (so it takes up half the page). It will also send out a blank page after it. Has anyon else experienced this and come up with a different solution?

Glad you solved your problem. On Aperture 3.02 I find no expansion slider. Where is it in 3.01?

My Mac Mini will not read TDK disks from my iMac G3.

My Mac Mini will not read TDK disks from my iMac G3.
I used an iMac G3 (2001) -- the ones that looked like a big pod -- running on OS X and saved files to TDK CD-R, 700 MB disks, which worked fine. Now that I have a Mac Mini (model number A1347) I cannot get this computer to read those disks, made on the iMac G3. Once inserted each disk will open and I can retrieve files for a short period, then the problems start. The computer makes some noises, the beach-ball/pinwheel goes around and I cannot get the files to open or the disk to eject. After a while the disk does eject -- to my relief. I keep using Control+E until ejection happens.
My Mac Mini (2010-2011) is hooked up to a View Sonic HDMI LED monitor, an iOmega external hard-drive for backing up, an Epson Stylus C88 Plus printer and to the internet by a fibre 10MB feed. The Mac Mini runs on OS X version 10.6.8 Snow Leopard: Processor Speed:2.66 GHz
I took the Mac Mini to an Apple retailer and he hooked the computer up to one of his monitors and it read the TDK disks just fine. I am now using Sony CD-RW, 700 MB disks, but I would prefer to use my TDKs because I have such a large pile of blank ones to use and there are those TDK disks with information that I want to look at from time to time. Can anyone tell me what to do?
DJG

Try disconnecting everything attached to the Mini except the monitor.
If that doesn't work, try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later. If successful, copy the files to the original account Public/Dropbox.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode - About
Safe Mode

Cannot Print full page 81/2 x 11

Hi:
I set up a 16 slide keynote presentation and everything is fine.
I wanted to print it out and in printing it :
The Pages are printing in a 4" x 5 1/2" (inches) size on a 81/2 x 11 page horizontally and
5" x 7" on a 81/2 x 11 Page vertically.
I have the slide size at 793 x 595.
I have looked in the printing menu options and I cannot see or make any changes that change the actual printing size.
I have not had any printing issues with other applications when needed to change a size. IE: iPhoto 81/2 x 11 to 4 x 6.
Any advice or website would be appreciated.
Thanks.
Greg

I actually figured it out.
You have to have it on individual slides to print full page.
Seems somewhat incorrect but it worked thats all that counts.
Greg

How can i avoid printing full pages?

How can I avoid printing full pages when printing a photo from my iphone to my hp envy?

Hi,
While pritning with Apple Airprint, the image will print as is..
You may find some more customization steps by using the HP Print Home & Biz app which allow some more customization of the printout:
Follow the steps below to find how to get the app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3692888&tmp...
Below you may find some more customization options of the app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01930282&cc=us&dlc=en&lc=en&product=3692888&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printer won't print full page

my hp m601 printer won't print full page from web browser , it's not working even if i'll change landscape nor portrait

@ti_Sh
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?

Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.

Extract the Page Size from the Document Properties

I have multiple drawings of various sizes and need to extract the page size from the document properties of each drawing.
this.info object can be used to extract the title, author, subject etc of a document but there is no property shown for extracting the page size.
Can any one please advise a way of extracting the page size from the document properties of a file?
Any assistance will be most appreciated.
Once the page size can be extracted I will be using a script to place a stamp with onto the drawing depending on the page size.
Thank you.

Thank you for your help George.
I have used the getPageBox script as follows:
var aRect = this.getPageBox("Crop");
var width = aRect[2] - aRect[0];
var height = aRect[1] - aRect[3];
console.println("Page 1 has a width of " + width + " and a height of " + height);
The console reports back - Page 1 has a width of 1162 and a height of 814.
The actual drawing shows in the document properties page size as 40.988 x 28.713 cm.
Can you please advise why the getPageBox measurement is not reporting correctly?

Mac Mini envelopes printing full page size from contacts

Similar Messages

Maybe you are looking for