Mac mini fails to startup after 10.5.8 upgrade

Hey All,
I just finished downloading the new update and my Mac Mini wont start up. It just stays on the white screen with the apple and it blinks the prohibit sign. I read everything I could on trying to get this baby back up and here's what I have tried.
I started up from the disc and under disc utility I repaired permissions & repaired disc-after repairing, both showed that there was nothing to repair.
I tried reseting PRAM by holding down command, option, p & r. Nothing
Is there something else I'm not trying. Do I have to reinstall....the sound of that makes me shutter. I'm one of those jack ***** who hasn't backed up my hard drive.
Thanks for your time in this frustration.

but...I was able to archive and install.
Great!
I'm gonna have to wait and figure out why 10.5.8 did this and maybe attempt another update later.
More then likely, there was some corruption in your hard drives directory that you didn't know about or Disk Utility could not repair. Then when you applied the update it got magnified. This happens often if users don't +Repair Disk+ before installing an update.
Then follow this procedure;
Download the Combo update from this site (yours may also have been corrupt), not +Software Update+, disconnect all firewire + USB devices except keyboard + mouse,Repair Permissions, re-install update, Repair Permissions again + try.
Sometimes downloads from +Software Update+ have issues so I always download the Combo Update.DALE

Similar Messages

Mac Mini doesn't startup after failure firmware update..

Hello.
I have a mac mini.
Downloaded firmware update and Mac OS X update through MAC OS X Software Update.
After that my Mini Mac ask me to restart.
And now my display shows "No signal" message and no startup sound. Indicator lights up, can hear Hard Drive sound and DVD disk sound, optical mouse lights up... and nothing else.
I tried to reset PMU... nothing again (

Hey Guys today i updated my macmini from 10.5 to 10.5.2 i downloaded the file 343MB on http://www.apple.com/support/downloads/macosx1052comboupdate.html since i have a slow connection i took me 5 hours to download the file after installed and and saw the success intallation with a green checkmark then restart and it presented me a blank white screen as i was reading the discussion i read that just leave it as the OS is doing it's thing but there is no indication whatsoever just a blank screen. then i saw my SD card reader blinking i remove it thinking that its the cost why there is now indicator that the HD is still reading so ive waited for 30mins without touching a thing and finally i heard the CHIME OF RELIEF the apple logo flashes and I have installed my OS 10.5.2 successfully

Mac Mini fails to restart after 10.4.5 update!

Hi,
Updated my Mac Mini to 10.4.5 this morning and restarted... now I'm getting the grey "panic" screen telling me I need to restart my computer. This can either happen virtually instantly or, as on a couple of occasions, when the OS X startup screen appears. Haven't tried anything else yet, but has anyone got any ideas before I start re-installing etc.?
Thanks in advance,
JF
Mac Mini 1.42 GHz Superdrive OS X 10.4.5 - nearly

OK... a bit further into the problem... booted to the DVD, the disk did need both a Repair and Permissions Repair.
At this point I re-verified everything, half way through the permissions verification, the same thing happened - now this is starting to point to a hardware issue.
So far I've had more luck, getting right into a full re-boot before the same thing happens.
At the moment I've started creating a disk image to an external firewire drive to make sure I can save everything, but I'm not even sure it'll finish that!!!
No problems whatsoever before the 10.4.5 update.
Any further ideas??
Is it possible that there's been a Bluetooth firmware update that may have snarled things up?
Thanks
JF

Mac Mini won't boot after 10.6.6 / Airport update

I just reinstalled 10.6.3 on a unibody Mac Mini, updated to 10.6.6 - and it booted fine. I ran another software update, and it suggested two more updates - which I believe was an Airport Utility update and a Java update. Now the Mac Mini fails to boot, stopping at the Apple logo.
The last lines of verbose startup goes like this:
Airport: Link Down on en1. Reason 8 (Disassociated because station leaving).
Aut result for: (MAC address) succeded
AirPort: Link Up on en1
AirPort: RSN handshake complete on en1
AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
Suggestions?
H

I experienced a similar problem today after a recent upgrade to 10.6.6. I ran Tech Tool Pro 5 on the machine, which reported everything as just dandy after about 6 hours of testing, but it still wouldn't boot. Next, I tried booting in Verbose mode, which revealed that my iMac was hanging on:
AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
I used Safe Single User mode (turn on power, then immediately press and hold Shift-Command-S until text starts appearing) to boot to a command line. Single User mode provides instructions on how to mount the file system read/write. I executed the `fsck` command as instructed, and after a few minutes it reported that it had made changes to the file system. At that point, I skipped the `mount` command and went directly to `exit` to continue the boot process, which completed. I turned AirPort back on (I had it turned off), then rebooted normally without any trouble.

Mac mini running very slow after downloading yosemite

Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
Here is a recent EtreCheck Report
Problem description:
Mac mini running very slow after upgrading to yosemite
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 2:56:48 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Cinema HD 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Computer, Inc. Apple Cinema HD Display
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Primax Electronics Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
[killed] com.apple.xpc.loginitemregisterd.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
16 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
CDSBupd Application (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      27% mds
      12% WindowServer
      1% discoveryd
      1% Microsoft Word
      1% Mail
Top Processes by Memory: ℹ️
253 MB discoveryd
64 MB Mail
52 MB Safari
43 MB iTunes
43 MB Preview
Virtual Memory Information: ℹ️
42 MB Free RAM
768 MB Active RAM
744 MB Inactive RAM
993 MB Wired RAM
104.37 GB Page-ins
4.15 GB Page-outs

More memory will help:
4.15 GB Page-outs
16 processes killed due to memory pressure
15 processes killed due to memory pressure

Mac Mini Won't Sleep after installing 10.4.6

My Mac Mini wakes itself up after just 1 minute of putting it to sleep mode. I've tried restarting my mini, and tried quitting all apps and disabling airport and bluetooth- but it still won't sleep! Anyone else experiencing this problem, I didn't have this problem with 10.4.5 and I've installed no other software since then...

This is for a Mac that won't sleep.
First, read things in Apple doc.#25801 on sleep settings.
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to recieve faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Recieve Faxes On This Computer box.
If that does'nt work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Cheers!
DALE

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Mac Mini freezes at startup for both mac and windows. Any Ideas?

Mac Mini freezes at startup for both mac and windows. Any Ideas?

Thanks for getting back so quickly. But, it worked. I did what you said and now it works doing a normal boot to in both Windows and Mac. I wonder what went wrong, as both operating systems didn't boot (I tried numerous times).
Anyway, thanks.

My mac mini failed to burn a playlist onto a blank cd, and now it will not eject the blank cd. what can i do?

my mac mini failed to burn a playlist onto a blank cd, and now it will not eject the blank cd.
leonardfromlancaster

If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
How force eject disc: Apple Support Communities
Download ForcEject Tool for Mac - Force-ejects discs stuck inside SuperDrive. MacUpdate.com

Mac mini not starting up after startup sound and activity indicator

hi my mac mini was just working slow, so i restarted it and it doesnt start. it just shows loading indicator after startup sound.WTH
I tried resetting the v-ram/p-ram with command-option-P-R but to no avail. Please help!
thanks in advance !!!!

Hello,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Mac Mini won't boot after failed XP installation

Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
What should I try next?
Thanks
Message was edited by: Yijian Cao

If you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
Let me know if you have more problems, maybe I can help.
Abel

Mac mini halts on "WaitForSystemMapper" after migration to Mac OS 10.8.5

Hi,
I have a mac mini mid 2010 with 4Gb RAM, nVidia GeForce 320M, HDMI running well under mac OS 10.7 last update
After making a clone on external USB disk, I tried to migrate to OS 10.8.5 I bought in june 2014 from the Apstore (after having halt after an attempt to Maverick migration)
1) I had also an halt after the OS 10.8.5 migration (grey screen with apple)
2) After shut down by pressing power button during 5s, I tried dto restart in Verbose mode (Apple+V key pressed at start), the it shows the following :
- some FIPS check are done, all passed with success,
- the it halts on "WaitForSystemMapper" with some hexadecimal indication following
3) After shut down by pressing power button during 5s, I have been abble to start OS 10.8.5 without the extension (safe mode with upcase key at start)
I tried to disinstall all non Apple programs but without result (same halt at reboot in normal mode)
4) I also tried to reinit the SMC (unplugging the mac, then starting after replug and 10s wait) : the same
5) I also tried to reinit the PRAM (Apple+Alt+P+R at start) : the same
6) Then, i formated the HD of the Mac mini and isntalled OS 10.8.5 from the external USB disk where I put the OS 10.8.5 installer
It rebooted well on the Mac mini HD to install OS 10.8.5
Then I requested to import data (accounts, programs and system setup) from the backup USB disk
It went well, but I was requested to upgrade the system and other Aps : I did it and.... again the same halt, with the same message and stop at "WaitForSystemMapper" when looking in verbose mode
Do you have any idea of what can occur, what can I displace or test in ktex for instance?
I would like not to have to reinstall all Aps manually, with their proper user data
Thank you in adavance for help

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

Mac mini fails to startup after 10.5.8 upgrade

Similar Messages

Maybe you are looking for