Mac Mini G4 powers off after 45 secs to 60 secs

Symptoms: When I boot up my G4 Mac mini, about 45 seconds to 60 seconds after the boot up chime, the Mac Mini justs powers off (as if someone just unplugged the power). There is no warning, and it happens in different places (sometimes during the bootup process, sometimes immediately after bootup completes). Another thing I notice is after I turn power on, the power light is solid for about 10 seconds, but after that, it starts pulsating (like in sleep mode, only it's not in sleep mode).
Events that may be related: I started having this problem directly after replacing the internal hard drive. I was grounded, and I didn't see anything get zapped, and there were no electrical incidents. However, it's hard to think that this activity doesn't have something to do with the problem.
Any ideas what this could be? I'm okay with working with the internals of this machine, but I just need a little direction. Apple does not appear to have much tech documents on the subject.
G4 Mac Mini Mac OS X (10.4.7)

Update: I have determined that this is due to a bad connector on the internal fan. One of the wires in the connector popped out, and when I put it back in, the first time it went in backwards, so when I tried to attach the fan cable, it crimped the end of the wire connector. That means that it doesn't securely fasten to the internal board. I can situate it to the point where it touches for awhile, and during this time, the Mac Mini does boot up with a solid power light, and stays on. However, eventually the wire goes loose, shutting down the fan, which in turn shuts down the Mac Mini.
Things I've tried:
- I've searched for a fan replacement on the web, but it cannot be found for purchase (not even on eBay).
- I went to Frys Electronics, but they don't have the fan nor that connector.
- I went to the genius bar at the local Apple store, and was informed that Apple nor Apple Authorized businesses are "allowed" to sell me the part. They did confirm that the fan not properly connected would cause the symptoms I'm experiencing.
I guess at this point, I need to do one of the following:
1. Find an unauthorized Apple repair business would be willing to sell me this part.
2. Figure out how to fix the connector on the wire so that it securely attaches to the prong.
3. Pay Apple over $100 to fix what is basically a $5 repair (this option is largely undesireable).
4. Find someone who is throwing out a broken Mac Mini where I can scavenge for the fan.
Any other suggestions, or any help in accomplishing my goal would still be greatly appreciated.

Similar Messages

My Mac Mini mid2011 powers off using Windows 8 pro?

after installing windows 8 my mac mini turns off.

Ok I was just checking to see if it was crashing. It it had the crash report would of been in the minidump folder.
Seems Windows 8 is taxing the system and it is Auto shutting down. You can install a temp monitoring program to see what the temps get to. Also look in Task Manager to see how many processes are running and the CPU load.

Mac mini running very slow after downloading yosemite

Why is my mac mini (mid 2011) 2.5GHz Intel Core i5 now running very slow in all aspects after upgrading to OS X yosemite 10.10.1?
Here is a recent EtreCheck Report
Problem description:
Mac mini running very slow after upgrading to yosemite
EtreCheck version: 2.1.6 (109)
Report generated January 21, 2015 at 2:56:48 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Cinema HD 1920 x 1200
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 15 days 18:52:31
Disk Information: ℹ️
Hitachi HTS545050B9A302 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (235.76 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Computer, Inc. Apple Cinema HD Display
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Primax Electronics Apple Optical USB Mouse
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.rcd.plist
[killed] com.apple.sbd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.warmd_agent.plist
[killed] com.apple.xpc.loginitemregisterd.plist
15 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.installd.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
16 processes killed due to memory pressure
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper UNKNOWN (missing value)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
CDSBupd Application (/Applications/ConceptDraw Office 2/Solution Browser.app/Contents/MacOS/CDSBupd.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
GoPro [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      27% mds
      12% WindowServer
      1% discoveryd
      1% Microsoft Word
      1% Mail
Top Processes by Memory: ℹ️
253 MB discoveryd
64 MB Mail
52 MB Safari
43 MB iTunes
43 MB Preview
Virtual Memory Information: ℹ️
42 MB Free RAM
768 MB Active RAM
744 MB Inactive RAM
993 MB Wired RAM
104.37 GB Page-ins
4.15 GB Page-outs

More memory will help:
4.15 GB Page-outs
16 processes killed due to memory pressure
15 processes killed due to memory pressure

In FM mode it shuts off after 60 sec.

Brand new, fully charged battery;.... in FM radio mode, ipod SHUTS ITSELF OFF after 60 sec. of play, FROM THE LAST TIME I TOUCH THE SCREEN.
I made no default settings changes.Does the same thing repeatedly.
I opened the pkg, charged ipod 4 hrs (USB2),tuned in a local FM station, ipod shuts off 60 from the time I last touch the screen.
I'm a BLONDE.

I had this same problem and posted in a similar thread but then I re-read another thread "Radio shuts off as the screen goes into sleep mode" and kd8 found the solution that also worked for me.
In my case the headphones were not all the way in. You have to push in with some force to get the connector plastic fully flush with the nano.
Worked for me, hope it works for you.
Of course this also fixed the loose headphone problem.
With the manual had emphasized this point.

Mac Mini Won't Sleep after installing 10.4.6

My Mac Mini wakes itself up after just 1 minute of putting it to sleep mode. I've tried restarting my mini, and tried quitting all apps and disabling airport and bluetooth- but it still won't sleep! Anyone else experiencing this problem, I didn't have this problem with 10.4.5 and I've installed no other software since then...

This is for a Mac that won't sleep.
First, read things in Apple doc.#25801 on sleep settings.
USB devices and hubs often cause Macs to not sleep or wake quickly from sleep (notably HP printers and scanners, HP all in ones, and Cannon scanners). Disconnect all USB except for keyboard and mouse and try. If it sleeps, add one back at a time testing after each one to find the culprit.
If you've set your Mac to recieve faxes, it may not be able to sleep. It might also have a damaged preferences file.
If you use your Mac for faxing, open System Preferences. click Print & Fax, click the Faxing tab, and uncheck the Recieve Faxes On This Computer box.
If that does'nt work or you've never faxed on your Mac, go to Finder/Hard Drive /Library/Preferences/SystemConfiguration and delete the com.apple.PowerManagement.plist and com..apple.AutoWake.plist files (if your Mac asks, type your admin. password).
If the latter file isn't present in the folder, go to user name(probably your name)/Library/Preferences, delete the com.apple.systemuiserver.plist file, and reboot your Mac.
Hope this helps!
P.S. One member here reported this (Michael Gleason);
"I have had this problem with my IMac G5. It is surprisingly irritating. LaCie's Silverkeeper backup software was the cause. By default it gave itself permission to wake up the computer to check if a backup was needed. Do you have this or a similar program installed which has scheduled activities including wake-up permissions as an option?"
Dave Hamilton provided this link, xlr8yourmac.com, to a member, which addresses failure of deep sleep with some users that updated and added new FireWire and USB cards.
tomhorvat adds this; After few days of messing around I found out that I had desktop background (wallpaper) set to change every 1 minute.
After unchecking "Change picture..." in system preferences (under Desktop/Screen saver), my powerbook went to sleep all by itself.
Cheers!
DALE

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

My mac mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone

My Mac Mini does not boot, after backing the enire system onto an external drive with Carbon Copy Clone. I had switched the start-up disk back to the original of course. Now all I see is the Apple logo. What should I do? Thanks in advance.

Try disconnecting any external devices, especially hard drives
and try rebooting.
If that doesn't help, then :
If you are running Lion, boot to the Recovery HD and run a
Repair Disk on the OSX partition.
If Snow Leopard, boot to the installl DVD and run Repair Disk.
Also, you may want to bookmark this:
http://reviews.cnet.com/8301-13727_7-57345273-263/troubleshooting-the-boot-proce ss-for-intel-macs/?tag=txt;title
for future reference. It is a pretty good explanation of the
Mac boot process and how to identify where problems may be.

MAC Mini does not restart after Yosemite update

I bought my MAC mini in 2011 and I successfully updated to Mavericks with no problems. I am not sure why my MAC Mini will not restart after I updated to Yosemite. The completion bar gets stuck around 30%.
Any help or ideas appreciated
Larry

Okay, this is strange. I tried restarting three times yesterday with the same results. In fact I left it go overnight only to find the next morning that the bar was still stuck at 30%. I did a hard boot a little bit ago and waited a few seconds. I restarted an it booted up fine.
Larry

Mac Mini VGA monitor problem: monitor powers off after 15s

Hi
Trying to hook up a Mac Mini to an ancient VGA monitor (Logix). Bought a Mini Display Port to VGA Adapter. On power up the apple logo displays on the monitor, but then the monitor screen goes black and the power light on the monitor flashes.
Is this the Pin 9 problem referred to here?
http://en.wikipedia.org/wiki/VGA_connector
The monitor only has a VGA input. If the solution is to go buy a new monitor that is fine, but seek advice on which type (budget is an issue)
thanks

Update: I have determined that this is due to a bad connector on the internal fan. One of the wires in the connector popped out, and when I put it back in, the first time it went in backwards, so when I tried to attach the fan cable, it crimped the end of the wire connector. That means that it doesn't securely fasten to the internal board. I can situate it to the point where it touches for awhile, and during this time, the Mac Mini does boot up with a solid power light, and stays on. However, eventually the wire goes loose, shutting down the fan, which in turn shuts down the Mac Mini.
Things I've tried:
- I've searched for a fan replacement on the web, but it cannot be found for purchase (not even on eBay).
- I went to Frys Electronics, but they don't have the fan nor that connector.
- I went to the genius bar at the local Apple store, and was informed that Apple nor Apple Authorized businesses are "allowed" to sell me the part. They did confirm that the fan not properly connected would cause the symptoms I'm experiencing.
I guess at this point, I need to do one of the following:
1. Find an unauthorized Apple repair business would be willing to sell me this part.
2. Figure out how to fix the connector on the wire so that it securely attaches to the prong.
3. Pay Apple over $100 to fix what is basically a $5 repair (this option is largely undesireable).
4. Find someone who is throwing out a broken Mac Mini where I can scavenge for the fan.
Any other suggestions, or any help in accomplishing my goal would still be greatly appreciated.

Mac Mini Fan Still Running After Turning Off Computer

I turned off my computer (Mac Mini) and, after the screen had gone black and the light turned off, I still heard the fan running. I turned off the monitor and my speakers, but it was neither of them, it was the mini. It also wouldn't let me turn it on again. I tried, but the light wouldn't come on. So I unplugged the power cable and plugged it back in and it turned on. Any reason why this happened and should I be worried?
Dean

This is what i get for the time that this happened in the System.log:
Oct 27 22:00:17 localhost kernel[0]: Jettisoning kernel linker.
Oct 27 22:00:17 localhost kernel[0]: Resetting IOCatalogue.
Oct 27 22:00:17 localhost kernel[0]: GFX0: family specific matching fails
Oct 27 22:00:17 localhost kernel[0]: display: family specific matching fails
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 2
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 4
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 4
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 4
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 4
Oct 27 22:00:17 localhost kernel[0]: Matching service count = 4
Oct 27 22:00:17 localhost kernel[0]: GFX0: family specific matching fails
Oct 27 22:00:17 localhost kernel[0]: display: family specific matching fails
Oct 27 22:00:17 localhost kernel[0]: Previous Shutdown Cause: 0
Oct 27 22:00:17 localhost kernel[0]: mac 10.3 phy 6.1 radio 10.2
Oct 27 22:00:17 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Oct 27 22:00:17 localhost mDNSResponder-108.2 (Aug 25 2006 14: 50:48)[36]: starting
Oct 27 22:00:17 localhost memberd[43]: memberd starting up
Oct 27 22:00:20 localhost DirectoryService[47]: Launched version 2.1 (v353.2)
Oct 27 22:00:22 localhost lookupd[46]: lookupd (version 369.6) starting - Fri Oct 27 22:00:22 2006
Oct 27 22:00:23 localhost diskarbitrationd[42]: disk0s2 hfs C86F1C74-578D-3C00-9929-9F23FA07345E Mac Mini /
Oct 27 22:00:23 localhost kernel[0]: yukonosx: Ethernet address 00:16:cb:97:b8:af
Oct 27 22:00:23 localhost kernel[0]: AirPort_Athr5424: Ethernet address 00:17:f2:46:d2:7b
Oct 27 22:00:23 localhost kernel[0]: display: Not usable
Oct 27 22:00:23 localhost kernel[0]: Registering For 802.11 Events
Oct 27 22:00:23 localhost lookupd[68]: lookupd (version 369.6) starting - Fri Oct 27 22:00:23 2006
Oct 27 22:00:23 localhost kernel[0]: [HCIController][setupHardware] AFH Is Supported
Oct 27 22:00:24 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Oct 27 22:00:24 localhost kernel[0]: unable to start recv logic
Oct 27 22:00:24 localhost kernel[0]: athchanset: unable to restart recv logic
Oct 27 22:00:24 dean-shutes-computer configd[40]: setting hostname to "dean-shutes-computer.local"
Oct 27 22:00:25 dean-shutes-computer loginwindow[69]: Login Window Started Security Agent
Oct 27 22:00:27 dean-shutes-computer configd[40]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Oct 27 22:00:27 dean-shutes-computer configd[40]: posting notification com.apple.system.config.network_change
Oct 27 22:00:27 dean-shutes-computer lookupd[95]: lookupd (version 369.6) starting - Fri Oct 27 22:00:27 2006
Oct 27 22:00:30 dean-shutes-computer configd[40]: target=enable-network: disabled
Oct 27 22:00:30 dean-shutes-computer mDNSResponder: Adding browse domain local.
Oct 27 22:00:46 dean-shutes-computer mDNSResponder: NAT Port Mapping (LLQ event port.): timeout
I think that it happened around 22:00:20, or maybe a little before. Does anyone understand this code?
Dean

Mac mini halts on "WaitForSystemMapper" after migration to Mac OS 10.8.5

Hi,
I have a mac mini mid 2010 with 4Gb RAM, nVidia GeForce 320M, HDMI running well under mac OS 10.7 last update
After making a clone on external USB disk, I tried to migrate to OS 10.8.5 I bought in june 2014 from the Apstore (after having halt after an attempt to Maverick migration)
1) I had also an halt after the OS 10.8.5 migration (grey screen with apple)
2) After shut down by pressing power button during 5s, I tried dto restart in Verbose mode (Apple+V key pressed at start), the it shows the following :
- some FIPS check are done, all passed with success,
- the it halts on "WaitForSystemMapper" with some hexadecimal indication following
3) After shut down by pressing power button during 5s, I have been abble to start OS 10.8.5 without the extension (safe mode with upcase key at start)
I tried to disinstall all non Apple programs but without result (same halt at reboot in normal mode)
4) I also tried to reinit the SMC (unplugging the mac, then starting after replug and 10s wait) : the same
5) I also tried to reinit the PRAM (Apple+Alt+P+R at start) : the same
6) Then, i formated the HD of the Mac mini and isntalled OS 10.8.5 from the external USB disk where I put the OS 10.8.5 installer
It rebooted well on the Mac mini HD to install OS 10.8.5
Then I requested to import data (accounts, programs and system setup) from the backup USB disk
It went well, but I was requested to upgrade the system and other Aps : I did it and.... again the same halt, with the same message and stop at "WaitForSystemMapper" when looking in verbose mode
Do you have any idea of what can occur, what can I displace or test in ktex for instance?
I would like not to have to reinstall all Aps manually, with their proper user data
Thank you in adavance for help

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mac mini doesn't wake after ram upgrade

Hi
I recently upgraded my mac mini from 2gb ram to 8gb ram and noticed that when the mac goes to sleep and the tv ( through hdmi wire) goes into standby that the mac mini will not send a signal to the tv anymore to wake up the tv from standby when I need it too from tapping on keyboard or moving mouse. At first I thought it was because of a software upgrade on the mac mini but when I switched back the ram to 2gb the mac mini will send the signal to wake the tv . I am just wondering has anyone come across this problem and what the solution is . I hav already reset pram setting and the usual things that everyone has mentioned in other posts . This seems to be a major flaw in apple deisgn unless they have a fix . I am stuck with my 2gb ram now in the mac which doesnt even have any speed . the only way I can use the 8gb ram is if i turn the mac on and off everytime I want to use it , as this is the only way to wake the tv with the 8gb ram inside as it doesnt wake the tv from sleep. This totally contradicts what apple say in their manual aswell, they say not to power down your mac if your using it everyday just put it to sleep which wont help me in my case . So at the end of this rant my only two options are to continue to use 8gb ram and have to power on and off mac everytime to wake the tv or use my 2gb ram which makes the mac run really slow as 2gb is not enough but hey aleast my tv will come back on from sleep mode .
Any answer will be a great help ???

Hi, no idea if this could affect it, but after the RAM install did you try thiese?
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Mac Book Pro - Mac Mini; sharing stopped working after IP/Net change

I apologize in advance for the length of this, I've got a complex issue that I've been unable to diagnose with the usual published notes...
I have a Mac Book Pro and Mac Mini. I previously had sharing and screen sharing working between both systems.
About a month ago I switched internet providers (to AT&T U-verse) and their router required me to make major changes to my internal network as listed below.
Since those changes the Mac Book Pro can not access the Mac Mini in any way via Finder options, but still shows it in Finder->Sharing. I can access the Mini via shell access (telnet/ssh, ftp, www) but nothing via the normal automatic Bonjour type accesses (file sharing, screen sharing).
Conversely, the Mac Mini has no difficulty accessing the Mac Book Pro in any way.
List of the significant changes that were made:
1) My main router was replaced by the AT&T router.
2) The AT&T router does not allow any fixed IP addresses within the network, requiring all of my network shemes to get re-done (I used a mix of fixed and DHCP previously).
3) The IP range changed for all computers due to the router.
4) Both Mac Mini and Mac Book Pro were and still are on DHCP.
5) The Mac Mini's wireless was disabled and it was plugged directly in to the Ethernet port on the main router.
The behavior of the system is as if the Mac Book Pro is locked on the old IP address (but only in the context of the Bonjour services). Although I can't prove this, there was a brief period where both the old and new router and ethernet and plugged connections were all active on the same network and during this period the Mac Book Pro accessed the Mini without difficulty (the old IP was bound to the wireless port on the Mini).
Unfortunately it wasn't until after I had exchanged this other router that I realized that things were not working correctly.
Another unusual clue, the Sharing used to say use afp://<mininame> to access from Windows and now it says afp://QVT_529. I have to assume this is something to do with the DHCP from the AT&T router but all of the AT&T system screens show the <mininame> properly bound to the active DHCP port and nothing hinting at what the QVT_529 references. Going to this address fails and I can't ping it from terminal.
I've been scouring the net for the last month trying different things with absolutely zero results on any front. All settings check out perfectly. No firewall changes were made. No evidence that anything is out of place.
However, I can still only connect in one direction. It just doesn't make sense.
Some things I don't know that I think might help me resolve the issue:
1) Any recommendations with how I might be able to get a better view of what Mac Book Pro might be trying to connect to via the Finder->Sharing link to the computer?
2) Any way to probe the Mac Mini's file or screen sharing features from the terminal (going around the Finder link)?
3) Any possible issues with local networks that might interfere with these services? (there are several switches/hubs between and other devices on the network, but everything checks out at the IP flow level)
Thanks in advance,
Barney

This is just a stab in the dark since I haven't run into this and I don't know all the steps you have taken (or researched.)
It seems to me that since it is working right from the mini->MB Pro, then the problem should reside on the mini's broadcast side or the mini's OSX firewall. If your firewall is set correctly (as you said), my guess would be that network or firewall preferences have been corrupted by combining multiple, conflicting settings for the same preference due to hardware changes. If I was experiencing this (assuming that every setting on the routers/switches and the firewalls (router/OSX) etc were 100% correct), I would create a new user account and verify that the problem is still manifesting itself. If this solves the problem, I know it is the user account that is messed up and not the OS. If this doesn't solve the problem, I turn off any sharing services, delete the resident Locations (by the drop-down menu in the Network System Preference) as well as the list of Connections (left pane of Network SP) and restart the machine. I then set-up new network, sharing services and firewall settings after the restart. This has solved all of my network sharing issues on my equipment, home and work. (Permissions not with-standing.) If this hasn't solved my problem, my next step would be to reset NVRAM, PRAM and clean system caches (using OnyX.) Reinstall of OSX commences then. I don't know enough of UNIX to be comfortable in terminal so if my steps above failed, I would be coming here to ask or, if I thought the problem resided on non-Apple hardware, the offending hardware support channels.
I don't know if this helps, but I hope so.
D.

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

Mac Mini keeps shutting off on its own!

Okay Apple Discussion Users, Here is my problem. I have a Mac Mini from early 2008. As of May 23, 2009 the mini started to RANDOMLY turn off on its own. For what reason, I Don't know! I will be using it maybe searching the web, and BAM, OUT COLD. And I have no reason why it's doing this. Its not a heat issue because i just had my mini cleaned up(dusted out) and i use SMC fan control keeping my mini at about 98ºF to 120ºF most of the time. I have opened my mini and re-seated my ram sticks and it seems to STILL be doing the same thing. Sometimes the mini will even blank out. I will be searching the web listening to music or something and the screen will black out. but the mac will still be on. I just cant use it. I have even reset my PMU/SMC on the mini, that seemed to make the mini act really weird, right after doing that the mini turned on with a fan running FULL speed and the hard drive running FULL speed, WHY IS IT DOING THIS ?!?!?!?!
Help!

Proper steps to reset the mini:
# Force Quit (Option-Command-Escape).
# Restart (Control-Command-Power).
# Force Shut Down (press the power button for 10 seconds)
to reset the SMC:
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Now if these to not work, the next thing i would try is uninstalling the fan management software and unplugging everything except the K/V/and mouse/
Message was edited by: tm311

Mac Mini G4 powers off after 45 secs to 60 secs

Similar Messages

Maybe you are looking for