Mac mini HDMI to DVI adapter cable

The new Mac mini comes with a HDMI to DVI adapter cable. Typically these (Apple) adapter cables are also available for sale separately however at the moment no other Apple device (if one ignores the Apple TV) would need this cable and as every 2010 Mac mini already includes the cable it is it seems not listed on the Apple store.
As I am interested in getting more of these adapter cables, does anyone know if there is an Apple part number for them, or even an Apple service part number?

Be careful what you read and with your answers. The OP is inquiring about an HDMI to DVI adapter, not a DVI to HDMI adapter. They are two very different devices! Although HDMI and DVI are electrically equivalent, some adapters work in only one direction, so you cannot always just turn it around and run it the other way.
John, there are HDMI to DVI adapters available from 3rd parties. Be careful that it has a return policy and a warranty. Some adapters are not to the standard and are not functioning as expected. I have been happy with Monoprice products, but have no experience with this particular adapter that you seek.
Currently the Apple Store has two Belkin adapters. If Apple sells it, it usually works well.
http://store.apple.com/us/search?find=HDMItoDVI&mco=MTA4NDUyNzc
Dah•veed

Similar Messages

New Mac Mini thunderbolt to DVI adapter issues

Hi there,
I'm working on a new studio installation. We have a new Mac Mini that we're trying to connect up to a 30-inch Cinema HD display with DVI input. We have a Kanex C30 Mini DisplayPort to Dual-Link DVI adapter that plugs into the Thunderbolt port and one of the USB ports (for power) on the back of the Mini, but despite our best efforts we aren't getting anything on the display. Going Mac - adapter - display results in about 7/8ths of the screen going white and displaying two green and misshapen Apple logos for about 5 seconds before it goes blank.
Ultimately we want to run it over quite a long DVI cable and currently have an Extron signal booster in place, which works perfectly from the Mac Mini's HDMI output through an HDMI to DVI adapter. However we're already using the HDMI output to feed another monitor.
So two questions really:
1. Can the Mac Mini feed two separate displays of different sizes? The 30-inch over Thunderbolt to DVI and another Apple 24 inch display over HDMI to DVI.
2. Does anybody have any experience with the Kanex or can you recommend an adapter that will work for us?
Any suggestions would be greatly appreciated. This whole process has been a very long headache!
Many thanks,
Josh

Hi Josh,
It should work, but not Mirrored of course, just Extended Display...
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

No signal message - Mac Mini - Samsung P2370HD - DVI-D cable

I just received my new Mac mini and want to connect it via DVI-D cable to my existing Samsung P2370HD monitor. I have a DVI-D to mini-DisplayPort adapter connected to the Mac Mini and then a long (3-5 ft) DVI-D male to DVI-D male cable connecting the adapter to my monitor. I have checked all connections but the monitor is giving me a "No signal" message. When I unplug the cable from the adapter, the monitor gives me a "Check signal cable" message, so it seems as if the signal is not making it through the adapter to the TV.
Can anyone offer advice? I really don't want to pay for a new monitor.

My brain finally kicked in, and I was able to get the monitor to work by using the mini-DVI to DVI cable included with the Mac Mini and connecting that cable to my DVI-D (male to male) cable. I am now getting a signal to the monitor. Guess I will be returning the Dual Link DVI to Mini Displayport adapter as it was not cheap!

Mac Mini Newbie + Viewsonic VX2450WM monitor. Need HDMI to DVI adapter? What cords needed?

Mac Mini Newbie here.
Getting the Viewsonic VX2450WM monitor for it. There is no HDMI on this monitor, but reviews said it's Mac mini compatible.
Do I need to get an additional cord? HDMI to DVI adapter cable? Does the supplied short white cord inside Mac Mini packaging suffice?
Thank you!
Art

No, the HDMI on Mini only support digital VGA is analogue
Can the HDMI port drive analog displays (VGA displays for example) using adapters?
No. The HDMI port will drive digital connections—such as DVI—using the adapter that came with the Mac mini, but cannot be used for analog displays such as VGA. You can purchase a Mini DisplayPort to VGA adapter separately to drive analog displays.
The above is from
Mac mini (Mid 2010) and later: Frequently asked questions about HDMI
SKDiver wrote:
It doesn't. I think we need an HDMI to VGA adapter. I'm not sure and waiting for help!
Earlier Minis did not have HDMI port

Mac mini display is flicking via HDMI to DVI adapter and DVI cable

i have received mac mini server (mid 2011) recently. mac mini is connecting the display via HDMI port using DVI cable with a HDMI to DVI adapter.
the display shows constant flicking. white dots/lines show randomly. it is like those signal noise when watching analog TV.
the same display works fine and well with macbook pro (early 2008) via DVI port.
please help. please advise.

So you know the display is working.
It seems to me you have a few possible problems.
1 HDMI-DVI cable is bad
2 DVI-cable is bad
3 Connections between cables or computer or monitor are bad.
4 HDMI port on the computer is bad.
I assume you've tried #3, and re-connected cables and wiggled inputs. So then try replacing 1 and then replacing 2 which are cheaper fixes than replacing/fixing 4.........
FYI, I'm connect my mac mini using the same setup you describe, with no issues....also inspect the cable ends carefully to look for any problems.
jb

How do i connect my mac mini to a kvm switch using the hdmi to dvi adapter?

I want to connect my Mac Mini using the HDMI to DVI adapter to a KVM switch cable. I have an Iogear KVM switch. The cable from the KVM switch has a male VGA end connection. I have been trying to determine the right adapter to connect the female DVI connection to the male VGA connector. I will be using the Mac mini and a PC running through the KVM switch. This is doable as the iogear switch is compatible with both a PC and a Mac. Any ideas out there? Thank you.

You would need to get HDMI or DVI to VGA CONVERTER, not a simple adopter. The converter requires USP connection for power. HDMI is only digital while VGA is analogue.
http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B
If your MIni has a mini displayport or Thunderbolt port yu can get a les expensive mini displayport to VGA afopter.

Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female?

Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female? Should I be getting a male to male DVI cable, or will this one work out of the box? Thanks!!

Looking at mine - the DVI end is female.

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

2011 Mac Mini and Acer x222w monitor incompatible? HDMI to DVI adapter issue

I am totally bummed because I just bought a new Mac Mini thinking I'd be able to use the display from my old system, an Acer x222w, which has both DVI-D and VGA connections. I hooked the monitor up using the HDMI to DVI adapter included in the box with the Mini. On boot, I could see the Apple logo, though it was not centered, and when the set up screen came up to the select language screen, it flashed quickly and then turned to snow.
I was on the phone with Apple support for over an hour trying to troubleshoot this issue. I was a little disappointed that tech support didn't even seem to be aware that the Mini came with an HDMI to DVI adapter. It was then recommended that I try an adapter for the mini display port, which the 2011 Mini doesn't have.
I was able to borrow another monitor, a Dell with DVI-D, and it worked.
I have searched for specs/requirements that might explain why the Acer monitor doesn't work while the Dell one does. I cannot find anything from Apple. I just assumed any DVI connection would work. Has anybody else encountered this problem? Most of the issues I've found on the forums involve trying to hook up to a home theater LCD TV, which I'm not trying to do. If I had known my monitor wouldn't work, I probably would have just saved up for an iMac.
Thanks in advance for any thoughts or tips!

Try resetting the SMC andNVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Next call Apple since yo have 90 days of free telephone support
Complimentary Support (USA)

Static using HDMI to DVI adapter on 2011 mini

Hi,
I bought my first Mac last week, the i5 2.3ghz mini. I originally set it up on my TV (using HDMI), downloaded/installed the updates, and messed around a bit before deciding that a 42 inch display isn't as convenient as I thought it would be.
Using the HDMI to DVI adapter that came with the mini I hooked it up to my 19 inch acer monitor. While booting can see the boot screen, but the display is very staticy. Once it logged in I was able to barely see well enough past the static to mess around with the display settings thinking that maybe the mini was trying to push an unsupported resolution to my monitor (because I set it up on my TV at 1080p).
I read up on the issue and it seems that some have had problems with static while waking up from sleep. Mine has static all the time.
By a stroke of luck I happened to have a HDMI to DVI cable on hand. I tried it out and it displayed beautifully. No static, works as I expected.
So the problem seems to be the adapter that came with the mini, the DVI cable that I was originally using (the cable works with my PC), or the HDMI port on the mini itself not working well with Apple's own adapter (not likely).
I was just wondering if anybody else has had this issue, and if they fixed it did it end up being the adapter or did replacing the DVI cable with a higher quality cable do the trick.
Thanks,
Corey

I just posted a similar issue here. The weird thing is that on my system, a Dell monitor works with the HDMI-DVI adapter but the Acer monitor doesn't. Do you think getting another adapter would resolve it fo rme? What kind worked for you?

Use Mini DisplayPort to DVI adapter to connect Mac Mini to Cinema Display?

Hi
I have a new-to-me current model Mac Mini and want to use it with my 20" Cinema Display (model A1081).
The Mac Mini instructions say to use the HDMI port on the Mac Mini with a DVI>HDMI adapter cable. I seem to have only a DVI>Mini DisplayPort adapter cable. I'm guessing this will be OK to use, but don't want to fry the system straight out the box
Can anyone confirm it's OK to use DVI>Mini DisplayPort connection to drive the display?
TIA
Jim

Thanks for the reassurance BSteely!
One thing I've seen when rummaging through the forum is a suggestion that with MDP>DVI adapter is problems with display waking from sleep. Short of setting it not to sleep, is there a workaround to wake it up again if it doesn't respond to usual stimuli?
TIA
Jim

HDMI to DVI adapter not allowing full resolution when using Mac OS but does with Windows 8.1

I have a Mac Mini and using the HDMI to DVI cable that came with the computer the maximum resolution it will allow is 1280 x 1024. I have 2 of the same monitors. The other is connected with DisplayPort to VGA adapater and displays full resolution (1920 x 1080) on both monitors but the HDMI to DIV will only show 1280 x 1024. I thought maybe it was my DVI cable or the adapter but when I boot up in Windows 8.1 through bootcamp both monitors display at full 1920 x 1080 resolution. Why does Windows give me the option for full resolution on both but the Mac OS doesn't? All the latest updates have been installed. I've contacted support and all the things they had me do didnt work. I see all these posts with people complaining about the same resolution issues. Is it that difficult for this to work?

Humm... the dual Samsung 21.5" monitor setup on my 2010 Mac Mini running Mavericks works a expected.One is on the HDMI to DVI adapter and the other in on a Kanex Mini DisplayPort to DVI adapter.
Try > Display Menu from the Mac App Store and see if you can select 1920 x 1080 for both monitors using it.
Addtitionally, are you sure that it the HDMI to DVI monitor that is not getting the correct resolution...? Most people are complaining that it is a VGA connected monitor that is not getting the correct resolution.
If it turns out to be VGA connected monitor, then try using a Mini DisplayPort to DVI adapter and DVI cable for that monitor instead of VGA.

Does DVI-to-HDMI work with my Mini DisplayPort to DVI adapter?

Hi,
I have a Mini DisplayPort to DVI adapter and was wondering if I get a DVI-to-HDMI, will I be able to get HDMI output?
If yes, should I get any specific DVI-to-HDMI adapter?
If yes, will it have sound with it?
Thanks.

So which does the community prefer between Dr Bott DVIator and the Apple DVI to ADC? I have the Apple but it is not working, as it is shutting the monitor down without even starting it (soft shut-down). Is this a bad adapter or the result of "stacking" adapters? I have read that it is more common to a bad adapter result.
Thanks.

New Mac Book Shuts Down when I plug in the Mini DisplayPort to DVI Adapter

I have a new 15" MacBook pro and every time I plug in the Mini DisplayPort to DVI Adapter, it shuts down. I installed the Mini DisplayPort to VGA Firmware Update (http://support.apple.com/kb/dl799) and it still shuts down. It shuts down whether I have a display/projector plugged in or not.
Any suggestions???

Try turning the MBP off before you connect or disconnect an external monitor. I could be wrong but I do not believe that the DVI interface was designed to be a hot swap interface.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

Mac mini HDMI to DVI adapter cable

Similar Messages

Maybe you are looking for