Mac mini hdmi to VGA

On my Mac mini, I have been using thunderbolt to VGA for a monitor & it works fine. I would like to add a second monitor. I bought a hdmi to VGA but when plugged in, there is no picture on the second display and the first display blinks off & on. Am I wrong in thinking this should work? How else would I get the second display?

From:
http://support.apple.com/kb/HT4214
Can the HDMI port drive analog displays (VGA displays for example) using adapters?
No. The HDMI port will drive digital connections—such as DVI—using the adapter that came with the Mac mini, but cannot be used for analog displays such as VGA. You can purchase a Mini DisplayPort to VGA adapter separately to drive analog displays.
If yo really need ton use two VGA monitors yo willneed a UBS video adopter
http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo
or
http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo

Similar Messages

Asus vh232h out of range, Mac mini thunderbolt to vga

Hey guys,
Pretty much what the title says.....
Mac mini
Asus vh232h (VGA only, no dvi socket)
Thunderbolt to VGA adapter
VGA cable (I've tried several)
(Benq monitor running fine on the hdmi port)
In short, if I use a VGA cable under 1.8m, there's no problem.
If I use a cable of 3m in length, or two x 1.8m cables, I get a "Out of range" message on the monitor.
(My office is shared space, so I need the Mac mini to be inside a lockable cupboard. That means I need a cable longer than 1.8m)
FYI, I don't seem to be able to set the asus monitor resolution in Mac settings (not sure if it can be done when monitor is 'out of range', but I can see the Asus in Display settings, Arrangement. It looks about half the width and height of the benq.
Is a monitor supposed to connect successfully over a 3 m cable?
Will a thunderbolt to dvi adapter work? (Would have to buy new monitor)
Any other ideas?
Thanks,
Darren

Bought a new benq 24" monitor, moshi mini display port to hdmi adapter, and 5m hdmi cable.
Sorted.
Must be an issue with apple mdp to VGA adapter when using VGA cables over 1.8m long.

2011 Mac Mini HDMI only 2Ch Stereo

Wow is this frustrating. I've had my Mac Mini for about a week, and for the life of me, cannot get surround sound working via HDMI. I've read so many posts about people with this problem but I can't find a definitive answer for a fix. All I want is for the Mac Mini to passthrough the audio so that my Pioneer Receiver can handle all of the Dolby stuff.
Setup is simple -
Mac Mini ------> HDMI -------> Pioneer VSX-1020 Receiver --------> Samsung 55" LED
Inside of the Midi Audio options, it shows my receiver as the audio device, and I have all of the options for 2ch, 8ch, etc. I also selected Dolby 5.1. I can only get PCM or Stereo to display on my receiver while ticking through these channel options, while I would expect Dolby to display if it is receiving a Dolby signal. Also, when I do the test tones in the Configure Speakers area, I get the correct test tones from all channels. BUT.........
No matter what I play whether it be iTunes, VLC, etc, I am only getting 2 channel sound and my subwoofer.
Can anybody help?? This seems like such a simple task yet it has me pulling my hair out.

ive had my 1021 for about 2 months and i think its great. Do you like yours?
i have 5.1 using optical cable to one of the optical in ports on the 1021. But you will need an optical-to-miniOptical adapter tip to use in the mini.
then make sure that any app through which you want 5.1 has that specified in its prefs. (like VLC)
VLC always has the option ' out through system', and if the system is optical out, then 5.1 will pass.

Problem switcing Mac Mini HDMI via an Onkyo 606 Receiver

I'm having problems when attempting to switch my Mac Mini HDMI via my Onkyo Receiver. Connecting via a DVI to HDMI converter. Works fine when connected directly to the TV.
When connected via the Onkyo, I get the Apple logo at the begining of the boot-up process, but when the screen would ordinarily switch to my desktop background, the screen goes blank.
Any suggestions?
John.

Do you have a second computer at your disposal? In cases like this, the best debugging method is to use a second computer and create a screen sharing setup under OS X Leopard, or a VNC set up if the second computer is not a Mac running Leopard. That way you will be able to see exactly what the mini is doing, even though the TV is blank.
Probably, in the end, you are going to need something like Gefen's DVI Detective to get HDMI switching to work the way you want it to.

Mac Mini HDMI - Stuck CD

Hello,
I have a CD stuck in my new Mac Mini HDMI.
* It does not appear in the Finder as a CD.
* Disk Utility shows the CD drive itself, but all options for eject, format, etc are all greyed out.
* Booting with the mouse button down does not work (I have a bluetooth keyboard; however, I selected to stop using it and connected a wired keyboard)
* Booting with C down does not work
* Booting with Option down until getting to the firmware boot disk selection menu, then pressing / holding the eject button does not work
* I used the Terminal command "drutil eject", the drive makes the eject noise, but nothing comes out
* Tried System/Library/CoreServices/Menu Extras/ double clicking Eject.menu - the menu only has a greyed out drive listed
I think that's everything I've tried. Please let me know if there's anything else I can try.
Thanks for all your help!

I figured out the 'problem'
Let me pre-face it by saying, my wife originally emailed me at work talking about this disc she couldn't get out.
Flash forward to now. I was fishing around with my work badge (thin hard plastic) and I couldn't feel anything that felt like the edge of a disc. So, after getting up the nerve I took a blank DVD, and slowly let the drive catch it and pull it in. Loaded up just fine.
I guess the "Stuck CD" must have evaporated
Good new is, I now know every single way to get the disc out should this happen to me for real (short of completely disassembling the Mac Mini). For now, all I can do is laugh (quietly so my wife doesn't hear).
Thanks for helping out Boece!

Can I run VGA monitor from Mac Mini HDMI port?

Hi:
I have a Mac Mini with one HDMI port and one Thunderbolt port. I have a Thunderbolt-only audio interface, so I need to connect my monitor to the HDMI port.
I bought an HDMI to VGA adapter cable for this purpose, but when I connect the monitor (Acer x233hz), all I get is a "No Signal Present" error message.
Is there a setting I can change in order to use the hardware I have, or do I have to find another solution?
Thanks!

You need an HDMI to VGA converter, not an adopter. Since the HDMI signal is digital only you need to convert that to analogue. You need somnethging like this
http://www.newegg.com/Product/Product.aspx?Item=N82E16812270492&nm_mc=EMC-IGNEFL 072414&cm_mmc=EMC-IGNEFL072414-_-EMC-072414-Index-_-AudioVideoSplitters-_-122704 92-L022C
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B

Mac Mini and thunderbolt/vga to LCD TV

Hi All,
Here is an interesting one......
I have just taken delivery of 5 new Mac Minis which have the thunderbolt port on them. The Mac Minis each connect using displayport tb/vga adapter to a switch then on to 5 LCD TVs.
The HDMI/DVI is not used.
In this config, if I start a Mac Mini the display will not route through the Thunderbolt/vga adapter to any of the TVs (even though I have selected them on the switch). The display seems to want to go through the default HDMI port.
If I connect a standard PC monitor to the tb/vga adapter and reboot, the screen shows correctly on the monitor. If I then change cables without a reboot, the LCD TVs show correctly!
I can add the PC monitor as a second monitor using HDMI/DVI and ensure that the outputs are mirrored AND that the VGA display is the primary. However, on reboot it's as if the details are all forgotten!
Searching around it seems that there are issues with Mac Minis and VGA connections to LCD TVs. That said, I wanted to put my environment out there and see if anyone had an ideas.
Interestingly enough, with older Mac Minis (without the tb/vga) it works perfectly well, indicating a problem with the new Mac Minis.
Thanks for ANY ideas!!!!

Hey Spost!
You have explained exactly what happened to me last night. I was afraid it was part of the 10.8.3 update or the latest ATV software update that hit this week. I tried from my macbook pro and the airplay from 10.8.3 and the atv software worked fine.
Previously my mac mini was connected to a monitor in my basement but last night i made it "headless" and moved it to my "server closet" airplaying prior to the move worked great ... then last night 4:3 Green Screen.
My guess is the computer needs to be connected to a external display in order for airplay resolution to figure itself out. Via Logmein i could see that the Mirror mode wanted to use the resolution that fit the mac and not what was best for the Apple TV ... Even forcing the change made the setting go right back to this mac.
Looks to be a bug in a plist file that apple would need to fix as many people run headless mac mini's and now wish to AirPlay to their Apple TV's without the need for a external cable run.

Mac mini HDMI 1080p SUCCESS with Panasonic 50" TH-50PZ81B

I recently purchased a Panasonic TH-50PZ81B. This is a UK model with a built-in satellite ("Freesat") receiver, and displays full 1080p and uses a 1920 x 1080 native panel. I used to connect my Mac mini HTPC to a Sony 42" plasma by VGA, and the Panasonic has a VGA input which displays 1,368 x 768 out of the box - no SwitchResX. It's decent. But, I wanted the "full" 1080p so bought the Belkin DVI-HDMI cable. Like a lot of people I got the choice of either the big black bars all around, or enabling "overscan" in Displays which would fill the screen, but, well, overscan! I spent all morning playing with SwitchResX and it just wasn't working (and the instructions at http://www.avsforum.com/avs-vb/showthread.php?t=751713 bothered me in that it seems to suggest you need to increase the resolution so it wouldn't be 1:1 pixel mapping). I tried to look at the service menu but it wasn't obvious what to do so I left it alone, and there is no manual picture adjustment like there was on my old Sony. Urgh.
But, by chance I noticed in the TV's Menu -> Settings menu on page 2 there is an option for Picture Overscan, which was turned on. I turned if off, and just like that got full 1080p 1:1 pixel mapping.
So, that's Mac mini with overscan ON. Use the great (weird) advice from Adam Nash to enable the Display menu bar item as seen here:
http://blog.adamnash.com/2008/01/24/yes-you-can-get-1080p-out-of-a-mac-mini/
It works - you have two identical-looking outputs but your TV will tell you one is 1080i and the other is 1080p.
On the TV settings go Menu -> Settings -> Picture Overscan and make sure it's OFF. Done!
I don't know if other Panasonic screens are similar but I can tell from the frustration on other posts - which I shared, believe me - that there are a lot of people with this issue wondering why SwitchResX is so non-intuitive etc. so I am hoping that for all those people who know how to use Google, this will show up in their searches.

I decided to post in the display forum because it was fine outputing via DVI-HDMI to a 1368*768 TV, and also fine via D-sub to the Full HD TV (although at 1368*768, but that's the limitation of the TV)
But thanks for your advice. I'll post there as well

Can I use a Mac mini with a VGA monitor?

The Mac mini web page lists an Apple Mini DisplayPort to VGA Adapter as an accessory, but the Mac mini doesn't appear to have a Mini DisplayPort.
The Mac mini also has an HDMI to DVI Adapter included, but would this allow a VGA monitor to be connected via an additional DVI to VGA cable? ie. can the HDMI port provide an analogue signal that a VGA monitor can receive?

Some Mac Minis do have mini-DisplayPorts. In these two it is between the HDMI and the USB ports:
(yes Thunderbolt should accept mini-Displayport).
In this one it is between the Mini-DVI and the USB ports:
Only the oldest Intel models would you need a different adapter to VGA
Those you would need a DVI to VGA adapter from Apple such as this one. Note, DVI to VGA is converting digital to analog, and not very useful, unless your TV has neither DVI nor HDMI. DVI is much better converted up to HDMI. And the audio would have to come in separately. So depending on your display model and make, you may be asking for the wrong adapter. VGA is fine if all you are going to do is view DVDs on an old TV. But if you want the ability to use the Dock, menubar, etc..., it is good to have a 1080p TV with built-in HDMI or better.

Can't get MAC MINI HDMI to consistently display on TV monitor

My new MAC mini is connected to a new HD Samsung TV. Initially had problem showing HD movies because I had Mini connected via VGA. Purchased appropriate connection for HDMI and HD movies show great, for a while. Appears that sometimes zhen the mini sleeps, monitor doesn't see mini with HDMI connection. When I switch back to VGA, the monitor once again sees the mini. Recently HDMI was working great until I downloaded updated software, and now once again monitor doesn't see HDMI, only sees moni when I reconnect via VGA. I've checked all connections many times and can't find the issue. Looking for any assistance.
THANKS

Update: Got the HDMI working again. Since I couldn't see mini mac with HDMI, hooked up VGA and restarted. While mac mini was restarting, changed connection to HDMI and low and behold, the monitor saw the mini in HDMI. Don't know if that's the optimum way.... but it worked.

Mac Mini HDMI Output Problem w/ LG L246WP

NOTE: This appears to be unrelated to the "screen flickering" that has been noted previously.
I'm using a fresh new Mac Mini 2012 with an LG L246WP LCD monitor. The monitor has HDMI, VGA and Component video inputs.
When I attach the monitor to the Mini DisplayPort output, using a Mini DisplayPort to DVI adapter connected to a DVI to HDMI cable, the display functions properly at all resolutions - including the native 1920 x 1200 resolution that I use it at normally. All resolutions are clearly displayed in the "Displays" System Preferences pane. The display looks perfect, functions properly.
When I attach the monitor to the HDMI port using an HDMI cable, the display does not fucntion properly. The display is shifted about 80-100 pixels to the left and about 20 pixels up, creating black bars on the bottom and right sides. Because of this, a large portion of the display is not visible including the menu bar and most of the left side. Additionally, the settings are reduced to "Best for Display" or "Scaled", with resolution options under "Scaled".
This is not acceptable. I had planned on simply using the Mini DisplayPort output as a workaround, since I already have the DVI adapter from an old setup, but I need to use Thunderbolt to access external hard drives for rapid data transfer. One of my Thunderbolt accessories does not have two ports, so I can't simply add the Mini DisplayPort adapter to a chain. The HDMI port needs to function properly with my monitor.
It's important to note that this monitor has functioned properly with many other comptuers running OS X, Windows and various Linux flavors and it hasn't ever done this before. I've tried several different HDMI cables, ruling that out as a problem. I've tried the HDMI to DVI adapter that ships with the Mac Mini 2012 along with two different DVI to HDMI adapters, ruling that out as a problem. I tried attaching several HDMI devices (game consoles, DVD players, etc) and they all function properly, ruling out an HDMI issue as a problem. The monitor functions properly when attached through the Mini DisplayPort to DVI adapter, so it's not a problem with the monitor. I've reset the PRAM already and the installation of OS X 10.8.1 is stock with no modifications or migrated data. I've tried the suggestions on the HDMI FAQ (although there's no "underscan" option available in Displays)
I tried to call AppleCare and after describing the problem I got disconnected with no callback. I started another ticket, described the problem, discussed the previous disconnection, was assured that I'd be called back if disconnected, and haven't heard back in two hours. So I started to dig into the problem in earnest.
This gets pretty technical.
After substantial research, it appears that this issue is related to the EDID that the monitor sends to the computer and, crucially, the way that the driver responds to it. For some reason, the HDMI port is recognizing the monitor as a CEA device instead of a monitor. As a result, it's restricting the monitor's available resolution to the native resolution that the CEA 681 Series Extension describes ("Best for Display") and all other resolutions (including 1920 x 1200) are only available as "scaled". For some reason that I can't discern, all resolutions (even the 1080i and 1080p options) have similar deformities.
I've attempted to fix this by placing an appropriate override file in /System/Library/Displays/Overrides with an edied EDID removing the CEA-enable flag from byte 127 but, even after a reboot, the OS still insists that it's a CEA device and it won't allow me to force it to recognize the monitor as a 1920 x 1200 LCD Monitor.
How did I come to this conclusion and develop the fix? A nearly identical problem description showed up on the following website, with details on how this user fixed the issue:
http://byuu.org/articles/computing/edid
They used a convoluted process that involved dismantling the monitor and flashing the EDID on the monitor itself. It fixed their problem. I'd prefer not to go through that process just because one computer has a problem with it. Frankly, I'd prefer if the new Mac Mini performed properly in the first place.
TL;DR: The Mac Mini 2012 doesn't work right with the LG L246WP through the HDMI output. Everything else works fine with it. This is very uncool. It's most likely to be an issue with the driver for the Intel HD Graphics 4000 GPU that are bundled with OS X 10.8.1. The Mac Mini 2012 won't update to 10.8.2 (yet), so I can't test it.
Anyone have any other ideas? Anyone else using a Mac Mini 2012 (or 2011) with an LG L246WP monitor? Anything simple I've missed?

Problem Resolved. But it was complicated. And a huge pain in the rear.
TL;DR: I flashed the EDID as described here. This is not recommended for the weary. Ideally, Apple should release an update OS X that will include the updated Intel HD Graphics 4000 drivers that utilize the CEA flag properly.
Here's the detailed version. As mentioned above, this isn't recommended for the weary. An improper (or interrupted) EDID flash can have seriously unpredictable effects on a monitor's performance.
Step 1: Get a Windows PC set up with a floppy drive and find a floppy disk. Use this system to format the floppy as a MS-DOS Boot Disk and copy over the "ddcw" program described at the aformentioned link.
This took awhile, but I was able to cobble together a temporary frankensystem with parts I had laying around. In installed XP and formatted the disk with XP's format tool.
Step 2: Grab EDID data from the monitor, modify it to disable CEA mode at bit 127 and make sure bit 128, the checksum, is appropriate.
This also took awhile. Several graphics cards I tried could not read or write EDID data. I ended up swapping AGP cards in my frankenstein box until I found one that worked - a generic GeForce4 4200.
Once the EDID data was written to the floppy, I edited the text file containing the EDID data to change the last two hex octets from "01 33" to "00 34" (00, to disable bit 127, and 34 is 33 + 1, which satisfies the checksum) and formatted the text file to match the sample included in the EDID_Write.zip file. Your mileage may vary - make sure the checks.
Step 3: Write EDID data to the monitor.
The link above mentioned three options: Easy (monitor's EDID is unprotected - write away!), Hard (monitor's EDID is protected - use service mode to attempt a fix), and Very Hard (monitor's EDID is protected, hardware modification is required).
Luckily my LG246WP simply needed to be put into service mode as described at the link above (menu + power) and once started up in service mode, I simply enabled "Aging Mode" (whatever that means) and attempted a DDCW write of the updated data.
Step 4: Profit!
After doing this, I powered off the monitor and powered it back on with the Mac Mini attached. The display functions PERFECTLY with HDMI out, just as it does using the Mini DisplayPort to DVI adapter.

How do you hook a 2012 Mac-Mini to a VGA monitor

How do you connect a thunder bolt (or HDMI) 2012 Mac-Mini to the secondary VGA input on my LCD monitor?

Get the Mini DisPlay port to VGA adopter. It plugs into the Thunderbolt connector
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adaptor

Mac mini to 2 VGA monitors? IS it possible?d

I am very interested in purchasing a Mac Mini. I would like to connect it to 2 VGA monitors. Is this possible? And if yes, how do i go about getting this done.

Yep. However the quality won't be on par with digital connections like HDMI and DVI. You will need a mini Display Port to VGA adapter ( http://store.apple.com/us/product/MB572Z/A ) as well as a HDMI to VGA adapter ( http://www.amazon.com/HDMI-VGA-HD15-Male-Cable/dp/B001OLCHJ6 )
Message was edited by: Motoxxbiker

LG 32LH3000 LCD + Mac Mini + HDMI = No Signal

Hello guys, hope you can help me with this one that is driving me crazy.
So here It is the setup: Intel 2007 Mac Mini running Snow Leopard. LG 32lh3000 LCD. DVI to HDMI cable and the result is I get a "no signal message". Using that very same cable with my 2007 Macbook Pro and it instantly gives me a perfect image.
Using a VGA to VGA cable in the MAC Mini works great but with the obvious quality loss compared to the HDMI.
I VNCed to the Mini through the MBP and tried to play with the resolutions to see if anything happened but I got nothing, still no image using the DVI to HDMI.
I dont know what else to do, can you help me?

Hello guys,
I just wanted to give you a brief update on the situation that, for a short moment, I thought It was solved.
Yesterday I tried once again to see If the Mac Mini wanted to “communicate” with my LCD, do I did the usual, connected my dvi -> hdmi to the mini and to the LCD; selected the correct hdmi input on the LCD and hit the power button on the mini.
I don’t know what happened this time but I saw the grey screen with the apple meaning the system was booting, I thought it had came alive somehow, but, when It was time to show the desktop, It turn back to the usual “no signal” screen.
The weirdest thing is that I didn’t do anything different from the other multiple times that I tried to connect the Mini and the LCD, I did the same thing that I tried before without getting anything, but this time, at least, I saw the Mini booting in a fabulous 1080p resolution...
Hope you can give me some help.... thanks!

Mac mini HDMI to DVI adapter cable

The new Mac mini comes with a HDMI to DVI adapter cable. Typically these (Apple) adapter cables are also available for sale separately however at the moment no other Apple device (if one ignores the Apple TV) would need this cable and as every 2010 Mac mini already includes the cable it is it seems not listed on the Apple store.
As I am interested in getting more of these adapter cables, does anyone know if there is an Apple part number for them, or even an Apple service part number?

Be careful what you read and with your answers. The OP is inquiring about an HDMI to DVI adapter, not a DVI to HDMI adapter. They are two very different devices! Although HDMI and DVI are electrically equivalent, some adapters work in only one direction, so you cannot always just turn it around and run it the other way.
John, there are HDMI to DVI adapters available from 3rd parties. Be careful that it has a return policy and a warranty. Some adapters are not to the standard and are not functioning as expected. I have been happy with Monoprice products, but have no experience with this particular adapter that you seek.
Currently the Apple Store has two Belkin adapters. If Apple sells it, it usually works well.
http://store.apple.com/us/search?find=HDMItoDVI&mco=MTA4NDUyNzc
Dah•veed

Mac mini hdmi to VGA

Similar Messages

Maybe you are looking for