Mac Mini I-7 2.0 (server edition) won't work with Dell 2709W monitor via HDMI

I just got a Mac Mini I7 quad 2.0. It's the server edition with an HDMI port. I plug my Dell 2709W monitor in and it continously flickers on and off and shows a green screen and the desktop for short intervals. Can anyone help with this issue.

Does the monitor work OK when connected to another HDMI output device?
Does the Mini HDMI output work OK when connected to another HDMI device?
You have selected the HDMI input on the monitor, right?

Similar Messages

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...

Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks

Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck !

I have a Power Mac G4 and i am trying to get it to work with my LCD

I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

Using a Mac Mini as a File/Media server with different accounts

I recently bought a new iMac and decided to use my G4 Mac Mini as a media/file server and backup server.
One of the decisions I can't figure out is how to organize all of my files and user accounts. I especially would like to be able to access them from either my iMac or my Powerbook. Also, I'd like to be able to use the iMac as the main iPhoto and iTunes machine.
So here's my ideal situation:
On the Mini create a user account for each media/user type: Music, Movies, Photos, Backup and then on the other Macs automount each user.
But I can't because once you connect to a mount via Finder you always connect via the same user. (is there a way around that?)
So I guess I can do it all under one user account, but then all of my configurations require subfolders which I was trying to avoid. It also means that if I give my kids access to one set of media, they get access to all.
Is there any way to create a more segmented Media Server? Is there any reason to or am I just making this too complicated?
Thanks
Cabal
iMac; Mac Mini;Powerbook Mac OS X (10.4.5)

One more important detail. I have external HDs connected to the mini as well. While testing the single user method, I realized I couldn't mount those external HDs. Could be because I set the media user to a Standard User. But I still find that odd.
One way I did find to solve my ideal situation is to use Windows File Sharing instead of Personal File Sharing. By editing the smb.conf file I can share specific directories under specific users.
But surely the best way to network on a Mac is not using Samba is it?
Cabal

Who is using the mac mini 2.6 gig i7 to edit video?

Who is using the mac mini 2.6 gig i7 to edit video? (16 gigs ram)
I will be using Premiere Pro cs6 (Hoping I can utilize The Adobe Cuda Core acceleration...anyone know?)
also
Gonna be using Final Cut 7
1920-1080P, AVCHD Format. Probably gonna convert to pro-res or mpg2 before editing
* Is the mac mini going to suit my purposes?
* Not sure what to do about drives?? Solid state? Sata? Thunderbolt

I use a 2012 mac mini server 2.0 i7 (quad core) 8GB ram as a second edit station with FCP 7. It works just peachy.
I doubt the CUDA engine is going to do much for you in Premiere. You need a beefy video card designed for CUDA and the mini doesn't have one.
Cut ProResLT and you can use FW800. Anything heavier, you'll want to go thunderbolt.
x

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server.

I want to install XP Pro SP2 on a Mac Mini from a 2003 RIS server. Is this possiIble? How is it done?
The mac has 10.5 which has bootcamp to enable Windows install. I have created a partition but the bootcamp utility asks for a CD. I want to install a RIS build. The Mac has a option for network boot but this seems to only work with Mac Server. I assume the network adapter is not PXE compatible and so a boot disk of some kind will be needed to kick this off?.

Hallo, I installed the program as you said. Everything ok.
When i have to give my serialnummer, it is not accepted. Code is not valid he said
1160-4008-7475-7547-5706-0812
Op 21-sep.-2014, om 17:44 heeft Rikk Flohr <[email protected]> het volgende geschreven:
Hi, I want to install my lightroom version on a new mac pro. How do i get started. Can't find it on this site. Thx
created by Rikk Flohr in Photoshop Lightroom - View the full discussion
www.adobe.com
Hit the Download link at the bottom the page.
Hit Lightroom
Hit Free Trial
When you are done downloading, launch, and enter your serial number from your previous installation.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6749435#6749435
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Sharing iTunes with a Mac Mini OS X Mountain Lion Server

I'm adding a Mac Mini OS X Mountain Lion Server to my home network. What options do I have to inetgrate iTunes into the server? Currently my master iTunes library is housed on a RAID on a Mac Pro, home sharing is on, and it interfaces over the network just fine into Apple TV (3rd gen). For instance, with Server can all devices on the network have access to that library? Could the library stream to the Apple TV in the living room, an iMac in the office, an iPhone in another room all simultaenously? Also, can any Server member order iTunes Store content and cause it it to be placed into the master library on the Ser

Maybe this discussion will interest you?
https://discussions.apple.com/thread/3097703

Mac mini wont connect to exchange server

i cannot connect my mac mini to my office exchange server. i was able to connect my ipad and iphone, but cannot figure out how to connect the mac mini using the same techniques. i unchecked autodiscover and still no luck

Hmm, the fact that that link didn't work may be thekey, here's that page anyway...
By Erik Eckel
October 25, 2011, 6:00 AM PDT
Takeaway: Erik Eckel addresses a common problem — trying to get Lion Mail connected to Exchange servers. Here are some tips for how to do it.
Many technology professionals become frustrated when connecting Macs to Exchange servers. The frustration typically results from a misunderstanding of Microsoft Exchange technologies. Here’s what Lion users and administrators should know.
Exchange Web Services is the key
When connecting a Mac OS X Lion system, the email server should be running Exchange 2007 or 2010. Microsoft Exchange 2003 does not leverage the newer Exchange Web Services (EWS) introduced with the 2007 platform. iPhones and iPads leverage ActiveSync technology, which is one of the reasons those mobile devices typically work with Exchange 2003 servers.
While there are workarounds for connecting Lion systems to Exchange 2003 servers, including leveraging POP3, IMAP or browser-based OWA technologies, those solutions are less secure and support fewer capabilities. Anyone considering such options should remember that Microsoftsuspended mainstream support for Microsoft Exchange 2003 in April 2009. Organizations still dependent upon Exchange 2003 infrastructure should already be planning if not implementing their Exchange 2010 migrations.
Connecting Lion Mail
Assuming an SSL certificate is installed, DNS A and MX records are properly configured, and the organization’s firewall passes the appropriate traffic, you can follow these steps to connect Mac OS X Lion’s Mail application to an Exchange 2007/2010 server:
Open Mail.
Click File and select Add Account.
Specify the user’s name in the Full Name field. Enter the email address and type the password associated with the user’s Windows/Exchange user account, then click the Continue button. Mail will search for the associated email server; users may have to click Connect if Mail reports it cannot verify the identity of the email server.
When the Incoming Mail Server screen appears, select Exchange from the Account Type drop down menu.
Within the Incoming Mail Server field, specify the email server, providing again the user name and password.
Check the Contacts and Calendars boxes if you wish also to synchronize those items, then click Continue.
If SSL is to be used, check the Use Secure Sockets Layer (SSL) box on the Incoming Mail Security screen and then click Continue.
An Account Summary will appear. Review the information entered to ensure accuracy, then click Create.
Connecting Outlook 2011
Microsoft Outlook 2011 users can configure the application to connect to properly configured Exchange servers by following these steps:
Open Outlook 2011.
Click Tools and select Accounts. If an account already exists, click the + icon and select Exchange. Otherwise, click Exchange Account from the Add an Account screen.
Enter the email address within the E-mail address field, then specify the authentication method. The most common method is likely the default user name and password configuration. Once you supply the requisite information, click the Add Account button (note Outlook selects the Configure automatically box by default).
If Outlook is unable to automatically configure the account, you will need to specify the server address, then click Add Account.
The Accounts screen will then appear. If additional settings must be configured, click the Advanced button. From the Server tab, you can override and update ports and change the server address, among other options. The Delegates and Security tabs, meanwhile, enable configuring delegate users, digital signing, and encryption certificates.

New Mac Mini with Lion Video Problem With Dell E228WFP monitor

Just purchased a new mini Mac 2.3 with Lion pre installed. I connected to my old Dell E228WFPI monitor via the Mini Display to VGA adapter. The mini mac worked fine for an hour until I put it to sleep. It would not rewake. After rebute the gray screen and apple logo appear with clock, but after clock screen to black and monitor goes to power saver mode. Took unit to apple store twice and could not resolve problem by changing resolution or other methiods. Finally, we learned that the system works fine using Belkin HDMI to DVI cable. This Dell Monitor had DVI connector. Hope this helps...

How can a computer that's been turned off (and I mean completely OFF) get a network request? Only a sleeping computer should react to such a request. If you're sure you shut down (Apple Menu, Shut Down), then only an internal power supply or logic board problem should cause this. The only way it could be software is if Lion is not shutting down the computer but is instead putting it to sleep. Is it a new Mac Mini? If so, you should have it replaced or repaired.

What is better Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Exel

I am working on Macbook pro retina for around 16 hours a day, it is ok but the screen is to small. I am opening about 25 - 30 EXCEL windows, 20 - 25 safari windows at the same time. Excel windows are small, they only show 40 rows and S column Now I am considering buying iMac 5k ( but the screen is only 27", however a very high resolution but I think that fonts and digits displayed may be too small ). I am also considering Mac Mini or Pro with 40" 4K TV ( 4k computer monitors are 27 - 31" , so better idea would be purchasing iMac 5k ) . The problem is that 40 - 42" TV don't have Display Port ( I can't find it anywhere )
Please help me to choose what would suit my needs better. I need large screen to work comfortably with an Excel sheets. What is better? Mac Mini or Mac Pro and 4K 40" screen or iMac 5K for work with Excel ?. The other problem I have is that when I spend 16 hours at work with retina macbook , my eyes are ok. Using the 30'' Dell screen 2560/1440 my eyes are tired after 2 hours.
Thanks for your help on advance
Best regards
David

Currently you can only get 4 K at 30 Hz via HDMI. Some users have reported jerky curser movement because of the 30 Hz.
I would go for the 5K iMac. You can add a second screen at 4K.
FaceTime HD camera
Simultaneously supports full native resolution on the built-in display and up to 3840 by 2160 pixels on an external display
Support for extended desktop and video mirroring modes
The Mac Mini supports:
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
The 2013 Mac Pro can use three and more displays:
Mac Pro (Late 2013): Using multiple displays - Apple Support
I would go for multiple screens

I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please!

I am confused about Icloud. I have a 5 year old Macbook, a 2 year old macbook and a 5 year old mac mini. What exactly do I need to do to get all this connected via Icloud. I also have an Iphone 3G. Help please! Also, I still don't understand exactly what the benefits are. At the moment it seems a lot of hassle to change a system that's been working perfectly well and that I'm very happy with. I'm not at all sure whether the mac mini (1.66 GHz INtel Core Duo) can be brought up to the relevant spec to run ICloud. Any thoughts?

There are two aspects to iCloud. One is simply getting an account, or migrating a mobileme account to iCloud. The second part is using the various features of iCloud to sync contacts, calendars, use music match or photo sharing, and store iWorks documents.
First to get an iCloud account:
If you have a mobileme account, you can migrate by simply logging onto www.icloud.com (ignore any references to Lion and just click through to complete the migration). If you have OS X Lion or an iOS 5 mobile device, you can create an iCloud account on that device using any valid AppleID.
Once you have an account, you can use JUST the mail account if you wishi - it is a standard IMAP account so you would set it up like any other IMAP email account you have, in whatever client program you use to read email.
To use the OTHER feautes of iCloud, your computers will have to be running OS X Lion (10.7). Your iPhone 3G will never be able to use iCloud as it cannot run iOS 5 (you need a min. of an iPhone 3GS to run iOS 5).
The requirements for OS X Lion are here - http://www.apple.com/macosx/specs.html You need a min. of a Core 2 duo processor so you mini is not capable of running Lion.
So, in your case, the single reasons for iCloud would be if you have a mobileme account, then use the online www.icloud.com to migrate your account so you do not lose your @me.com email address. You can use iCloud email (without using any other iCloud features) by setting it up as IMAP mail with these settings - http://support.apple.com/kb/HT4864
If you want an iCloud account and do NOT already have a mobileme account, you will need to upgrade one machine at least to Lion in order to be able to create an iCloud account.

I've upgraded my mini mac to os x mavericks but now it won't work. I can't use the internet or photoshop etc... can anyone help?

I've upgraded my mini mac to os x mavericks but now it won't work. I can't use the internet or photoshop etc... can anyone help?

Hardware Information:
          Mac mini - model: Macmini3,1
          1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 0 days 1:0:4
Disk Information:
          Hitachi HTS543216L9SA02 disk0 : (160.04 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 159.18 GB (62.27 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          PIONEER DVD-RW DVRTS08
USB Information:
          SanDisk Cruzer Edge 4 GB
                    NO NAME (disk1s1) /Volumes/NO NAME: 4 GB (162.5 MB free)
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Configuration files:
          /etc/hosts - Count: 30
Startup Items:
          HWNetMgr: Path: /Library/StartupItems/HWNetMgr
          HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.SwitchBoard.plist 3rd-Party support link
          [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [System] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [System] com.epson.epw.agent.plist 3rd-Party support link
          [System] com.kodak.BonjourAgent.plist 3rd-Party support link
          [System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
          [System] com.waltop.waltoptablet.plist 3rd-Party support link
          [invalid] KodakAiOBonjourAgent
User Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [not loaded] com.akamai.client.plist 3rd-Party support link
          [not loaded] com.akamai.single-user-client.plist 3rd-Party support link
          [not loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
User Login Items:
          iTunesHelper
          Skype
          Dropbox 17-33-15
          SpyderUtility
          Dropbox
          Launch Nikon Message Center 2
          FKeyHandlerX
Internet Plug-ins:
          FlashPlayer-10.6: Version: 11.5.502.110 3rd-Party support link
          Flash Player: Version: 11.5.502.110 Cannot contact Adobe
          iPhotoPhotocast: Version: 7.0
          QuickTime Plugin: Version: 7.7.3
          AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          BrowserPlus_2.9.8: Version: 2.9.8 3rd-Party support link
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
          Akamai NetSession Preferences 3rd-Party support link
          BrowserPlus 3rd-Party support link
          Flash Player 3rd-Party support link
          Growl 3rd-Party support link
          Rapport 3rd-Party support link
Old Applications:
          /Users/[redacted]/Applications/Akamai
                    checkclientstatus:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    macui:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    Akamai NetSession Uninstaller:          Version: 1.0 - SDK 10.5 3rd-Party support link
          Epson Printer Utility 4:          Version: 9.00 - SDK 10.5 3rd-Party support link
                    /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               3%          WindowServer
               1%          EtreCheck
               0%          mDNSResponder
               0%          aosnotifyd
Top Processes by Memory:
          109 MB          com.apple.IconServicesAgent
          63 MB          Dropbox
          63 MB          Mail
          57 MB          mds_stores
          55 MB          Finder
Virtual Memory Information:
          348 MB          Free RAM
          741 MB          Active RAM
          411 MB          Inactive RAM
          290 MB          Wired RAM
          315 MB          Page-ins
          0 B          Page-outs

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downlo

I need to know how to delete the most recent version of Firefox. I JUST downloaded it tonight and my computer doesn't have that little edit bar to work with so I can download the proper Adobe player and my internet has been screwed up ever since I downloaded the new version of Firefox. I just want the old version of it back since I apparently can't download the Adobe stuff that is necessary to keep my computer safe from Hackers. It sure would have been nice to know there was an issue with the new Firefox Update BEFORE I uploaded it. I have Vista which is usually an issue with both Adobe and Firefox. I don't seem to be able to run much of Adobe at all on my computer because of the Vista.
== This happened ==
Every time Firefox opened

I have also noticed all my settings won't stay set, example....I removed the check mark from "third party cookies", the when I close Firefox and reopen the check mark is back, also my tool bar has screwed up....can't reset, been having trouble the up grade.

How do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

how do I figure out if I have usb 3.0? I am trying to buy compatible external hard drive (western digital my passport for mac) and I can not figure out if it will work with my mac book.

Dont buy a Western Digital, get a Hitachi or Seagate (Toshiba is made by Hitachi). These are the most reliable, and the HD used inside Macs.
ALL HD can be made compatible with your MAC (including a WD if you already bought same), ......they just need to be formatted for the Mac platform, format them in Disk Utility as Mac OSX extended journaled.

Mac Mini I-7 2.0 (server edition) won't work with Dell 2709W monitor via HDMI

Similar Messages

Maybe you are looking for