Mac Mini is stuck in the gray screen

My daughter has an early Mac Mini. She tells me that she was working away yesterday and all of a sudden the screen turned gray. A short time later a message appeared on the screen and told us that we needed to turn off the power and re-start the computer. Since yesterday, we have tried restarting the computer several times with the same result.
I have no idea if there's anything I can do at this point. Is there anything we can try or do I need to take the Mac Mini to the Genius Bar at my local Apple store?
Thanks for any suggestions and guidance.
John

Solution - we bought a new iMac. Daughter's thrilled; I'm not. Oh well, at least one of us is happy.

Similar Messages

Hi i am having a big trouble. MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do?

MY mac wont start past the gray screen. I tried starting on safe boot, single user user mode , recovery mode. Everything it gets stuck on the gray screen i even tried reinstalling it , same thing what should i do? it lets me reinstall sometimes Sometimes.... it is weird.

orshikhfromsc,
boot from the Mac OS X Install DVD that originally came in the box with your MacBook Pro (by holding down the C key as it starts up). When the desktop appears, select Disk Utility from the Utilities menu and erase your internal disk. After it’s been erased, reformat it. After it’s been reformatted, exit Disk Utility and reïnstall the version of Mac OS X from that DVD onto your internal disk. After that version of Mac OS X has been reïnstalled, boot from your internal disk and run Software Update to get it up-to-date within that version; that should allow you to redownload and reïnstall Mavericks, if desired. If Mavericks is reïnstalled, run Software Update again to get it up to date.
If you no longer have the two grey installation DVDs, you can purchase a replacement set from either Apple or iFixit.

I'm stuck on the gray screen on start up

Tried all the tips I can find but no joy. Able to boot in safe mode but nothing else. Can't use Lion Recovery and unable install Snow Leopard from disk as it gets stuck on the gray screen again. Any suggestions?

It appears you may have a bad Recovery HD partition. By any chance did you create a USB Recovery HD for emergency uses? If not, then I think you may have to first reinstall Snow Leopard then re-download and install Lion. Since you can boot into safe mode you can create a backup of your files because reinstalling Snow Leopard requires erasing the drive:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

My apple wont turn on. it gets stuck on the gray screen with the spinning wheel and the apple on the screen

My macbook air turns on but not completely, it gets stuck on the grays screen.   It shows an apple an a spinning wheel and that is as far as it gets. sometimes I can get to an screen that shows macintosh hd and i clicked on it and the computer turned off.

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
     a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My new 2011 mac mini is stuck at strat up screen and stays like that! How to fix

My new 2011 mac mini is stuck at the start up screen ( apple logo ) and it stays there I can't reinstall lion because there is no drive in this gen how do I fix it????

OS X Lion: About Lion Recovery

My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
Try PRAM Reset Cmd + OPtion + P + R on start up.
Try safe boot - hold down shift on start up.
Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

I have an iMac G5 stuck on the gray screen with spinning gear. I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear.

I have an iMac G5 stuck on the gray screen with spinning gear. I woke up to it being stuck on a blue screen, then force quit and now it's stuck on gray with spinning gear. Please advise.

If you have a G5 then it's a PPC (Power PC) based iMac, this is an Intel iMac forum. Try the Gray screen appears during startup link for troubleshooting steps. I suspect the HD has crashed.

My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Macbook getting stuck on the gray screen with the apple

Please help!
I had to turn off my computer this morning manually becuase it froze and when I went to turn it back on, it just gets stuck on the gray screen at the beginning. It will have the apple logo on it for a while and then switch to a "folder" with a questions mark in the middle, then to circle with a line through it and will never actually boot up. Please, any thoughts would be wonderful!

Do you have your install discs with you? If so, insert Install Disc 1 into the optical drive and boot the computer while holding the C key. The OS X Installer should load. Choose a language to proceed. Once that window is gone, menus should appear at the top of the screen. From the Utilities menu choose *Disk Utility*. In the left-hand column, highlight your hard drive's icon--the one that lists the xx.x GB capacity/manufacturer. If you have installed Windows via BootCamp, choose the *Macintosh HD* icon. Choose the *Repair Disk* button. If anything cannot be repaired, post the error here. If nothing needs to be repaired, click the *Repair Permissions* button. Also check the *S.M.A.R.T. status* of the drive in the lower-right corner.
Best of luck!
~Lyssa

My Mac mini is stuck in a reboot screen that is all white with a grey folder with a question mark in it

My Mac mini is stuck in reboot screen that's
white with a grey folder in the middle that blinks
and there is a white ? mark on it. What do I do ?

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(70837)

I tried to eject a cd, didn't work so I turned off the computer and now it keeps getting stuck at the gray screen. How do I fix it?

Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!

Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus

Mac Pro gets stuck on the grey screen and won't finish booting

I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit. I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot (everything works o.k. there) or starting up from the software disk to perform the repairs. I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit. This happens every time I try it. I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart. Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out. Could it be a graphics card issue? I did notice some funky visual glitches occurring prior to the breakdown. Any other ideas?

I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
And off load all your data to other drives.

Why is my macbook pro stuck on the gray screen?

I turned on my macbook today and tried to turn it on, only to find out that it decided to stay on the gray screen for quite a while. I have tried to re-boot the system quite a few times, but nothing has helped. I then googled my situation to find a solution. I came across a post from someone who recommended holding down command + V and the power button. A black screen then appeared with a bunch of white writing. I haven't touched it because i dont want to mess it up any more that i already have. PLEASEEE HELP ME!!! Thank you!!!!

Just take it to the apple store. Same thing happened to me and they fixed it by going on the black screen but dont mess up with that screen let them fix it.

Mac mini wont get past the gray apple screen

recently i bought a mac mini with intel i5 processor and os lion installed, it was perfectly running until today it wont start or rather get past the initial apple sreen with the spinning gear. yesterday i connected an external usb drive 1tb to use as backup disk and store my songs for itunes. today i cant use it , ihave tried safe mode booting , pressing command, option , p and r keys during startup, removing the power cord then reattaching it. anybody have a solution.

i have tried removing the external drive but still problem persists

Mac mini gets stuck in the start-up screen! What do I do? Won't boot up.

Well, I talked my friend into getting a Mac mini, and now it freezes up as the OSX boots up. There appears to be a disc of some sort in the drive, so I can't even put the start-up disc in. What can I do?

Hold the mouse button down as the machine boots, that should kick the disk out of the CDROm. The next step is to just try to reboot again if the system does not boot after kicking out the CD. If you put the OS disc in and hold down the "c " key that should allow you to boot from the OS disc, then search for the utilities folder and repair the disk.

Mac Mini is stuck in the gray screen

Similar Messages

Maybe you are looking for