Mac Mini lagging after upgrading to Mavericks

Upgraded Mac mini to Mavericks.  System before was running great with no lag time and fast with the internet along with different applications, email, uploading photos, no problem.  After upgrading to Mavericks noticed lag times in logging into different applications, browsers, email and definitely uploading photos.  Did a speed check on four different sites and all were over the 15mps up and 1 down with my internet provider.  Before I had 4 up and 1 down with my internet provider before provider upgraded everyone to the 15 up and 1 down, it was fast so no problems before.  Any suggestions before I drive to Des Moines for a Genius bar appointment?  Thanks much appreciated.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Mac Mini late 2012 upgrade to Maverick loop issue

    Hi there,
    I'm a Mac Mini noob.
    Last night I downloaded Maverick and this morning I clicked install.
    The Mac rebooted and then loaded then showed some error messages and then goes to password screen. I enter it and it says there was a problem and the MAC will be restarted.
    It now just loads, shows the error message and automatically goes to password enter screen and then says theres an error and will be rebooted after I enter the correct password.
    Can some one tell me whats wrong and how to fix or even to cancel this upgrade? I just want my Mac Mini to work again.
    Thanks
    L

    Thanks BDAqua, I didn't try your method but...
    Hmm I attempted the following and it was resolved and I managed to get back to my desktop and out of the restart loop (phew). I then pulled up my guts and double clicked the Maverick install again and this time it was successful. I followed this article which I found shortly after I posted the problem on here:
    http://www.gottabemobile.com/2013/11/04/os-x-mavericks-upgrade-boot-loop-fix/
    OS X Mavericks Upgrade BootLoop Fix
    If you are upgrading to OS X Mavericks and get stuck in a boot loop that will not complete the installation, you may need to hit a special key combo to force the computer to complete the installation and upgrade process.
    Gotta Be Mobile reader Steve Small reached out to let us know about the OS X Mavericks Upgrade bootloop problem, which forced his MacBook Pro to get stuck showing the odd text on a screen below, which looks like a OS X crash and an error message that says, “Your computer restarted because of a problem. Press a key or wait a few seconds to continue startup.”
    Read: How to Upgrade to OS X Mavericks
    Ultimately this error prevented Small from upgrading to OS X Mavericks, as it did many other users. Thankfully if you get stuck in this OS X Mavericks boot loop you can press four keys at startup to reset the NVRAM and get past the boot loop.
    OS X Mavericks upgrade boot loop and kernel panic can prevent an easy upgrade.
    When you restart the Mac, press Option-Command-P-R until you hear the startup sound a second time. This will reset the NVRAM, which is where your Mac stores the following information.
    Speaker volume
    Screen resolution
    Startup disk selection
    Recent kernel panic information, if any.
    In this case, resetting the NVRAM should clear up the boot loop issue which was possibly related to the startup disk selection stored here or to a kernel panic. The error screen shown at the top of this guide looks very similar to a kernel panic.
    With this out of the way you should be able to continue the upgrade to OS X Mavericks. If the computer does not pickup where it left off you may need to go to LaunchPad and select Install OS X Mavericksagain. If you need to install it from scratch, here is our guide to a clean OS X Mavericks install.
    Read: OS X Mavericks Best Features
    http://www.gottabemobile.com/2013/10/24/20-best-os-x-mavericks-features/Apple released OS X Mavericks as a free upgrade to all Mac users with a compatible Mac in October. The software update is available for many Macs as old as mid-2007 are compatible with the free update. Users can download the 5GB installation file from the Mac App Store on any of these compatible devices.

  • Slow Mac Mini Server after upgrading to OS X Yosemite

    I Have a Mac Mini Server mid 2010. With 2.66Ghz intel Core 2 Duo and 4Gb DDR3 and after upgrading to OS X Yosemite the computer is really slow and get stuck very often. Please help me figuring out what’s the problem and to make it run faster.

    EtreCheck version: 2.1.8 (121)
    Report generated 29 במרץ 2015 בשעה 21:15:38 GMT+3
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini Server (Mid 2010) (Technical Specifications)
        Mac mini - model: Macmini4,1
        1 2.66 GHz Intel Core 2 Duo CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        NVIDIA GeForce 320M - VRAM: 256 MB
            HDMI     spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:13:17
    Disk Information: ℹ️
        ST9500420ASG disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            adrian (disk0s2) / : 499.25 GB (352.51 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        ST9500420ASG disk1 : (500.11 GB)
            EFI (disk1s1) <not mounted> : 210 MB
            roy (disk1s2) /Volumes/roy : 499.76 GB (499.32 GB free)
    USB Information: ℹ️
        Apple Inc. MacBook Air SuperDrive
        Microsoft Microsoft® Nano Transceiver v2.0
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        NOVATEK USB Keyboard
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [not loaded]    com.lge.driver.LGAndroidmdmcontrol (4.12 - SDK 10.9) [Click for support]
        [not loaded]    com.lge.driver.LGAndroidmdmdata (4.12 - SDK 10.9) [Click for support]
        [not loaded]    com.lge.driver.LGAndroidndiscontrol (4.12 - SDK 10.9) [Click for support]
        [not loaded]    com.lge.driver.LGAndroidndisdata (4.12 - SDK 10.9) [Click for support]
        [not loaded]    com.lge.driver.LGAndroidserial (4.12 - SDK 10.9) [Click for support]
        [not loaded]    com.lge.driver.LGAndroidusbbus (4.12 - SDK 10.9) [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.bittorrent.uTorrent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    יישום  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        uTorrent    יישום  (/Applications/uTorrent.app)
    Internet Plug-ins: ℹ️
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Default Browser: Version: 600 - SDK 10.10
    Safari Extensions: ℹ️
        AdBlock
        Adblock Plus
        SafariRestore
        New Tab Button
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             7%    WindowServer
             2%    uTorrent
             0%    AppleSpell
             0%    mds_stores
             0%    fontd
    Top Processes by Memory: ℹ️
        228 MB    Google Chrome
        146 MB    Finder
        103 MB    ocspd
        90 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        56 MB    Free RAM
        1.63 GB    Active RAM
        1.59 GB    Inactive RAM
        723 MB    Wired RAM
        1.78 GB    Page-ins
        3 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 29, 2015, 09:00:49 PM    Self test - passed

  • Mac mini unusable after upgrade to 10.5.6

    I upgraded a Tiger 10.4.11 Mac mini to Leopard using the 10.5.6 DVD.
    After the upgrade, the computer is so slow it is unusable. Spotlight it indexing but that does not seem to be the cause of the slowdown. I checked the system log, and it shows "memberd" is crashing continuously.
    I used launchctl to remove memberd from the launch list and the computer works normally again.
    How can I prevent memberd from being launched every time I restart the computer? What could be starting it?

    If memberd is constantly crashing, there's something else wrong with your system that is causing it to do so.
    Simply stopping memberd isn't a solution.
    Have you tried the usual troubleshooting techniques of running Disk Utility to make sure your hard drive verifies OK, and running a "Repair Permissions?"

  • Mac keeps rebooting after upgrading to Mavericks from Snow Leopard

    Hi, I have upgraded my Mac to Mavericks (Mid 2010) from Snow Leopard and my Mac keeps restarting itself, not sure what the cause is, can any help? Thanks

    Here is the error message I get:
    Anonymous UUID:       EB50AA11-2803-1B21-F027-853513903D23
    Fri Oct 25 22:20:56 2013
    panic(cpu 3 caller 0xffffff7f8911bfac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b082000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 3), Frame : Return Address
    0xffffff80f72ead50 : 0xffffff8006c22f69
    0xffffff80f72eadd0 : 0xffffff7f8911bfac
    0xffffff80f72eaea0 : 0xffffff7f877cb53d
    0xffffff80f72eaf60 : 0xffffff7f87897d9e
    0xffffff80f72eafa0 : 0xffffff7f87897dfc
    0xffffff80f72eb010 : 0xffffff7f87b1c5be
    0xffffff80f72eb140 : 0xffffff7f878bbd41
    0xffffff80f72eb160 : 0xffffff7f877d208d
    0xffffff80f72eb210 : 0xffffff7f877cfbae
    0xffffff80f72eb410 : 0xffffff7f877d14d7
    0xffffff80f72eb4e0 : 0xffffff7f887bbffd
    0xffffff80f72eb660 : 0xffffff7f887bba03
    0xffffff80f72eb670 : 0xffffff7f88780cd0
    0xffffff80f72eb680 : 0xffffff7f88780d45
    0xffffff80f72eb690 : 0xffffff7f88762b11
    0xffffff80f72eb6d0 : 0xffffff7f88765085
    0xffffff80f72eb700 : 0xffffff7f887b5b50
    0xffffff80f72eb780 : 0xffffff7f8879dcc0
    0xffffff80f72eb7e0 : 0xffffff7f8879e5ba
    0xffffff80f72eb830 : 0xffffff7f8879eaa0
    0xffffff80f72eb8a0 : 0xffffff7f8879f1a8
    0xffffff80f72eb8e0 : 0xffffff7f8876c1ca
    0xffffff80f72eba60 : 0xffffff7f8879bb20
    0xffffff80f72ebb20 : 0xffffff7f8876acb9
    0xffffff80f72ebb70 : 0xffffff80070cc226
    0xffffff80f72ebb90 : 0xffffff80070cd821
    0xffffff80f72ebbf0 : 0xffffff80070cb28f
    0xffffff80f72ebd40 : 0xffffff8006cb6008
    0xffffff80f72ebe50 : 0xffffff8006c26bb1
    0xffffff80f72ebe80 : 0xffffff8006c139b5
    0xffffff80f72ebef0 : 0xffffff8006c1e003
    0xffffff80f72ebf70 : 0xffffff8006cc921d
    0xffffff80f72ebfb0 : 0xffffff8006cf3e26
          Kernel Extensions in backtrace:
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500325ASG, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Internal Memory Card Reader
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Hub
    USB Device: Built-in iSight
    USB Device: IR Receiver
    FireWire Device: Rugged Safe, LaCie, Up to 800 Mb/sec
    Thunderbolt Bus:

  • After upgrading to mavericks, i cannot open mac app store, preview, calendar, etc

    Why i cannot open mac app store, preview, calendar, software update, etc after upgrading to mavericks? How can i fix this? please help me

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

  • Mac Pro never sleeps after upgrading to Mavericks

    Hi Folks
    Just realised that after upgrading to Mavericks from Mountain Lion, my Mac Pro never goes into sleep mode after the time set for it in System Preferences > Energy Saver.
    This never happened with Mountain Lion.
    Any body here having the same issue?
    FYI - This is a 2012 Mac Pro having duo 6-cores, 64 GB RAM, 1 x SSD and 3 x HDD.
    Thanks you for your comments.
    B

    Test after each of the following steps that you haven’t already tried:
    Step 1
    Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved. Note that, as stated in the article, the computerwill not sleep if Internet Sharing is enabled.
    Step 2
    From the menu bar, select
     ▹ System Preferences ▹ Accessibility ▹ Speakable Items: Off
    Step 3
    Select
     ▹ System Preferences ▹ Bluetooth ▹ Advanced...
    and uncheck both boxes marked
    Open Bluetooth Setup Assistant at startup if...
    Step 4
    Reset the SMC.
    Step 5
    Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 6
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 7
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

    After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help

    Well where is your library located now if not in the iTunes folder?  See the links below on what your iTunes folder should look like and put it back together:
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847

  • After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

    After upgrading to Mavericks on my Mac Pro, mail always requires that I type in my password when launching. How do I change that?

    If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
    Step 1
    When prompted for the password, check the box marked Remember this password in my keychain.
    Step 2
    Check that the keychain is working.
    Step 3
    Check that the default keychain is unlocked.

  • After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    After upgrading to Mavericks my Mac Pro does not open my double CD drives when I hit eject in the menu bar it locks up (please Help)?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report — it will be very long and not helpful.

  • Duplicate emails on outlook for mac after upgrading to mavericks

    I was getting duplicate emails on my outlook for mac after upgrading to mavericks
    After reading several websites,  I realise this is a common problem.
    some people suggesting checking " prevent app nap"
    this seemed to work for a while, but is now back again
    it is very difficult to handle, with hundreds of emails downloading each time i log in
    regards
    seema

    Try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Why does the migration wizard run every time I start up my mac after upgrading to mavericks ?

    After upgrading to Mavericks, I log in as normal but then a migration wizard starts up asking me where I want to import data from and create new accounts. Why and how do I stop it ?

    It could be part of OS X's Resume feature. Any app that is open at shutdown will re-open on boot unless the tick in the following image is deselected when shutting down/restarting:
    Also check that Migration Assistant isn't listed in System Preferences>Users & Groups>Login Items.

  • Mac OS mail (PDF) attachments cannot be read after upgrading to Maverick

    After upgrading to Maverick receiver of e-mails with PDF attachment cannot see or open the attachment. Everything works normally with attaching and sending but it seems to disappear on its way to receiver.

    Having the same problem…attachment is visible inline, but cannot be opened nor downloaded. See this thread:
    https://discussions.apple.com/message/23508746

  • IMac became very slow after upgrading to Mavericks

    after upgrading to Mavericks my mac became very slow, i can´t do anything on it without waiting at least15 min. Does someone know what i can do to make it better?

    Mine too, I am really frustrated, since I read all reviews and asked some friends and co-workers about mavericks, they are all happy, but my macbook is almost useless now.
    I tried using Mackeeper, but then apple says it´s a malware, so there´s my solution....
    Anyone with a good answer for this problem ???
    Is there a way to download Snow Leopard and do a clean install ??

Maybe you are looking for