Mac mini locks up after yosemite update

After the screensaver activates the computer locks up and I have to hold the power button in till it reboots
Any ideas, this computer was bulletproof until the upgrade

The screensaver module is the item you selected in the Desktop & Screen Saver preference pane.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Mac Mini (intel) freezes after Security Update

On May 16th I downloaded and installed ´Security Update 2006-003 (Intel)´ on my Mac Mini. Since then I have been unable to have any other session with it than in "safe boot" mode.
Then, on May 18th, during one of these "safe" sessions, I also downloaded and tried to install ´Mac Mini SMC Firmware Update´, hoping that this could be the resolve. The initial behaviour changed slightly, but that was all.
When I now look for upgrades, I get the message that the latter is available for download, so it has obviously not been activated.
I have been keeping the ´box´on for days in case there was some process going on in the background that would resolve it, but in vain.
As something appears to have entered the machine with these updates, are there any way to reverse them and throw them out?
Mac Mini Mac OS X (10.4.6)
Mac Mini Mac OS X (10.4.6)

Thanks for your reply!
To adress your questions in sequence:
1 - After powering up, the grey Apple screen emerges, and shortly after the rotating wheel of bars starts going. Then the screen changes to blue, and the shield showing "Starting Mac OS X" has its blue ribbon rotating up towards 100%. Now, here things may change from time to time, sometimes it reaches 100%, sometimes not. But the next phase is the same; a shift to a dull blue-gray screen with nothing on it, which remains until I eventually give in and presses the power off button for some seconds. I even left it like this this for a day, to make sure nothing was going on behind, but in vain.
2 - I am not sure about your meaning "Since the computer operates normally in Safe mode....", I did not normally operate it in safe mode, it became a necessity after the download I mentioned. Tried to look in the suggested FAQ, but did not find anything I found relevant. (But then -being new to Macs - maybe I did just not understand it?)
3 - The Security update was the last of 7 updates that was downloaded from the Apple Support pages, the others being: QuickTime v7.1, Front Row Update v1.1.2, iDVD Update v.6.0.2, iWeb Update v1.1, iPhoto Update v6.0.3 and iMovie HD Update 6.0.2. As I said, I am new to the Apple structure, so I do not know if these softwares are regarded as third-party or not.
There is, however, as far as I can see, nothing that indicates that any type of panic with the core is declared during start-up, it just becomes incommunicado!
4 - Obviously, the most attractive option I can see is to follow your advices here. But the mentioning of specific versions of CD in conjunction with re-installatin alerts me somewhat. What I got with my Mac Mini are two CDs; ´Mac OS X Install Disc 1´ (Labelled Mac mini) and ´Mac OS X Install Disc 2´. Does this means that I am unable to do Archiving?
Finally, I have some other topics (Basically with QuickTime) with this Mac Mini as well, that was the reason I started looking for updates in the first place, that will become important again when I overcome this blow. But as I am looking around in the forums I become increasingly aware that there are lots of people experiencing similar problems to myself (Poor functioning of Airport, problems using flat-screens as monitor), and now this one. I mean to see a pattern, and that is that there are significant differences in functionallity between OS X for the "normal" processor and the one for Intel. How deep goes this difference? There is obviously softwares for OS X that cannot run on this machine, and how do I keep them out?
Hoping for some more helpful hints
Best Regards,
Ole
Mac Mini Mac OS X (10.4.6)

Mac MIni running hot after memory update

I have a late 2010 Mac Mini. Using Temperature Monitor, it always showed CPU temperatures at anyhting between 45 and 65.
Last week, I upgrdaed the memory from 2gb to 5gb. Since then the temprature has been contantly between 69 and 72.
Are these events connected and, in any case as the temperature limit is 105, does it matter?
David

please explain this 105 temperate limit. where is this mentioned?
intel cpus can go really hot with no apparant damage
my core i7 right now is running 150 degrees, because it is doing a mixture of seti @ home and milky wayi @ home packets
my video card just idling not doing much is 104
just turning a computer on can cause it to go to 105 degrees farenheit
i used to have to have a problem with my mac mini actually over heating to weird blue screen and rebooting that was because my pram / nvram or whatever you call it smc needed to be reset and it wasn't turning the fan on
when apple says operating temperature of 95 degrees and 115 degrees storage temperature , they are talking about the temperate of the room. they arent talking about the actual cpu temperature
when intel cpus hit the actual temperature limit (which is around 160-180 or so ) it will shut down and drop its load and and shut down hard to save itself. before that temperate is reached, the intel cpus will commonly step down their speeds down to dissapate heat
105 is nothing to worry about
update
my studio xps core 2 duo laptop that i am typing on for which i am not really doing a whole lot on it except like
browsing the web is:
gpu 126 degrees farenheit
temp sensor 113 degrees farenheit
cpu (both cores) 99 degrees farenheit
now if u meant 105 degrees celsuis then i think the warranty would be voided

Mac is extremely slow after yosemite update, really need help. (Etrecheck inside).

After recently installing yosemite my mac been painfully unresponsive and slow. I cannot boot up in normal mode, i'm currently in safe mode.
What I have tried so far and what I know:
Initially thought filevault was the issue, I disabled encryption and now it says "decryption is paused" and hasn't resumed in days. Potentially is the issue.
I run a hardware diagnostic test using the hardware check within the macbook pro (booting up holding D) and the mac didn't identify any hardware issues.
I reinstalled yosemite (not a clean install) and the issue was not resolved.
I have completed a backup of my mac so all my data is secure.
Any help would be great, even just telling me how to turn on filevault will be helpful.
My etrecheck:
EtreCheck version: 2.0.11 (98)
Report generated 23 November 2014 20:15:11 GMT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:11:9
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (268.58 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Samsung M3 Portable Samsung M3 Portable 500.11 GB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
Backups (disk2s2) /Volumes/Backups : 494.35 GB (264.39 GB free)
Recovery HD (disk2s3) <not mounted> [Recovery]: 650 MB
GeneralUse (disk2s4) /Volumes/GeneralUse : 4.63 GB (4.60 GB free)
MOSART Semi. 2.4G Keyboard Mouse
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBTraktorKontrolS4Driver (2.6.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.mice.driver.Wireless360Controller (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.WirelessGamingReceiver (1.0.0d12 - SDK 10.8) Support
[not loaded] com.mice.driver.Xbox360Controller (1.0.0d12 - SDK 10.8) Support
Startup Items: ℹ️
DoubleCommand: Path: /Library/StartupItems/DoubleCommand
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[invalid?] org.thebends.iphonedisk.mobile_fs_util.plist Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.watchdogd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.mcafee.menulet.plist Support
[not loaded] com.mcafee.reporter.plist Support
[not loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[not loaded] org.pqrs.KeyRemap4MacBook.server.plist Support
Launch Daemons: ℹ️
[not loaded] com.adobe.fpsaud.plist Support
[not loaded] com.bombich.ccchelper.plist Support
[not loaded] com.DesignScience.DSMTTool.plist Support
[not loaded] com.ea.origin.ESHelper.plist Support
[invalid?] com.mcafee.ssm.Eupdate.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[not loaded] com.mcafee.virusscan.fmpd.plist Support
[not loaded] com.mice.360Daemon.plist Support
[not loaded] com.microsoft.office.licensing.helper.plist Support
[not loaded] com.oracle.java.Helper-Tool.plist Support
[not loaded] com.oracle.java.JavaUpdateHelper.plist Support
[not loaded] com.teamviewer.Helper.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
User Launch Agents: ℹ️
[not loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.google.keystone.agent.plist Support
[not loaded] com.spotify.webhelper.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
FilesWarwick Application (/Users/[redacted]/Downloads/FilesWarwick.app)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Flux Application (/Users/[redacted]/Applications/Flux.app)
uHD-Agent UNKNOWN (missing value)
uTorrent UNKNOWNHidden (missing value)
Google Chrome UNKNOWN (missing value)
wine Unix Executable File (/Applications/Wine.app/Contents/Resources/bin/wine)
proXPN Application (/Applications/proXPN.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 67 Check version
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 12.0.4r144 - SDK 10.6 Support
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Safari Extensions: ℹ️
LinkThing
3rd Party Preference Panes: ℹ️
Flash Player Support
Java Support
MacFUSE Support
Native Instruments USB Audio Support
XBox 360 Controllers Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 230.30 GB
Destinations:
Backups [Local]
Total size: 495.00 GB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 495.00 GB < (Disk used 230.30 GB X 3)
Top Processes by CPU: ℹ️
      86% corestoraged
      45% WindowServer
      34% Google Chrome
      10% com.apple.preference.security.remoteservice
      9% xpccachectl
Top Processes by Memory: ℹ️
177 MB xpccachectl
170 MB Google Chrome
137 MB Microsoft PowerPoint
87 MB WindowServer
82 MB spindump
Virtual Memory Information: ℹ️
26 MB Free RAM
1.45 GB Active RAM
1.44 GB Inactive RAM
674 MB Wired RAM
3.07 GB Page-ins
167 MB Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

HT4061 My gateway PC is locked up after itunes update. When i restarted the computer for the hangers to take effect. Now my pc is locked up. It gives me a client Mac address and no boot file name received. What happened, and how do I get my pc back?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

jute way pc locked up after iTunes update. It says client Mac address 001320 be ad 25 . PXE E53 No boot file name received
pXE MOF. Exiting Broadcom PXE. ROM . How do I unlock my pc?

Mac mail CRASHING after Yosemite update 10.10.3

Are you KIDDING APPLE?
mac mail CRASHING after Yosemite update 10.10.3
The program is completely unusable and crashed after update.
Computer is less than 1 month old and can't run a basic mail program
I REALLY HOPE APPLE FIXES THIS BUG ASAP
Without fix I will return the computer

True,
I also have AppleCare, but unfortunately, after calling them they can't determine what is creating the problem either.
Other forums have shown other troubleshooting steps which didn't solve my problem, but may help others:
Mail app keeps crashing after Yosemite update
Mail crashing after upgrading to 10.10.3
Lets cross our fingers that 10.10.4 will be out shortly to fix this

How do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

how do i reformat my hard drive on mac mini late 2011 with yosemite before selling my mac

You can't legally sell or give away that computer with Yosemite installed.
Before you sell or give away your computer, in addition to the steps listed in this support article, take these steps:
1. Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
2. Reset the PRAM and the SMC, which might contain personal information.
3. If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
4. If you activated FileVault in OS X 10.7 or later, turn it off.
5. If you use Boot Camp, the partition must be deleted.
6. If you created any other data partitions on the internal drive, remove them in Disk Utility.
7. If the machine has an internal hard drive, erase the one remaining data partition with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by starting up in Internet Recovery mode (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer to the buyer.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either. The buyer will have to purchase them.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Late 2009 Mac Mini EFI 2.1 Firmware update not needed/already factory installed?

Here has been my issue of trying to figure out if Mac Mini can handle (and fully use) 8GB of RAM with my current EFI version.
I want to upgrade to 8GB on a LATE 2009 Mac Mini that currently has Boot ROM MM31.00AD.B00 and was told to update with EFI Firmware update 2.1 but it does not install saying "This update is not needed on this machine".
I found various contradicting posts saying that I need my Boot ROM to be MM31.0081.B06 or my machine won't utilize the 8GB fully
and will slow down in performance and/or crash after the Apple recommended 4GB.
But here's what I found interesting. Some users have mentioned that the Late 2009 Mac Mini's shipped with updated firmware and don't need this update but could not find a concrete answer as to yes it did ship with it or not.
Apple doesn't even list a Late 2009 Mac Mini as needing a Firmware update in this list of Firmware updates: http://support.apple.com/kb/HT1237 . Should I just assume that my machine shipped with said update and is capeable of the 8GB? I use this for Logic Pro 9 as a somewhat portable workstation that I can take with me so maxing out the RAM would be ideal for me.
Any help or clarification would be greatly apprishiated,
Nelson

Actually a Late 2009 can take 8GB of RAM and only the Early 2009 needs the EFI update.
see > Apple Mac mini Memory DDR3 / Ram upgrades for 2009 Mac mini & 2010 Mac mini unibody models
If you have any dough's, contact the OWC tech specialist
at > OWC Tech Center: Online Guides & Videos, FAQ, Manufacturer Links, Product Manuals, and more

Usb port not working after yosemite update please help

ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm    2.7.2f16
com.huawei.driver.dc_net    1.0.2
com.huawei.driver.cdc_acm    2.6.2f17
com.huawei.driver.cdc_usb_bus    1.0.3
com.huawei.driver.HuaweiDataCardDriver    4.25.45
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.70
com.apple.driver.AGPM    100.14.37
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
com.apple.driver.AppleOSXWatchdog    1
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHDA    266.5
com.apple.driver.AppleMikeyDriver    266.5
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.ApplePolicyControl    3.7.21
com.apple.driver.AppleLPC    1.7.3
com.apple.driver.AppleUpstreamUserClient    3.6.1
com.apple.iokit.IOUserEthernet    1.0.1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleHV    1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelHD3000Graphics    10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
com.apple.driver.AppleBacklight    170.4.12
com.apple.driver.AppleMCCSControl    1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleThunderboltIP    2.0.2
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.AppleIRController    327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.iokit.SCSITaskUserClient    3.7.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.5
com.apple.driver.AppleUSBHub    705.4.1
com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
com.apple.driver.AppleFWOHCI    5.5.2
com.apple.driver.AppleSDXC    1.6.5
com.apple.driver.AirPort.Brcm4331    800.20.24
com.apple.driver.AppleAHCIPort    3.0.7
com.apple.driver.AppleUSBEHCI    705.4.14
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIButtons    3.1
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    3.1
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
com.apple.nke.applicationfirewall    161
com.apple.security.quarantine    3
com.apple.security.TMSafetyNet    8
com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
com.apple.iokit.IOUSBMassStorageClass    3.7.0
com.apple.AppleGraphicsDeviceControl    3.7.21
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    11
com.apple.driver.DspFuncLib    266.5
com.apple.kext.OSvKernDSPLib    1.15
com.apple.iokit.IOAudioFamily    200.6
com.apple.vecLib.kext    1.2.0
com.apple.driver.AppleHDAController    266.5
com.apple.iokit.IOHDAFamily    266.5
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOSurface    97
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.AppleGraphicsControl    3.7.21
com.apple.driver.AppleBacklightExpert    1.1.0
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleSMBusController    1.0.13d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
com.apple.iokit.IOBluetoothFamily    4.3.0f10
com.apple.driver.IOPlatformPluginFamily    5.8.0d49
com.apple.iokit.IOUSBUserClient    705.4.0
com.apple.driver.AppleSMC    3.1.9
com.apple.driver.AppleUSBMultitouch    245.2
com.apple.iokit.IOUSBHIDDriver    705.4.0
com.apple.driver.AppleUSBMergeNub    705.4.0
com.apple.driver.AppleUSBComposite    705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
com.apple.driver.AppleThunderboltNHI    3.1.7
com.apple.iokit.IOThunderboltFamily    4.2.1
com.apple.iokit.IOEthernetAVBController    1.0.3b3
com.apple.iokit.IOFireWireFamily    4.5.6
com.apple.iokit.IO80211Family    700.52
com.apple.driver.mDNSOffloadUserClient    1.0.1b8
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.7.0
com.apple.iokit.IOUSBFamily    705.4.14
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    300.0
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleMobileFileIntegrity    1.0.5
com.apple.driver.AppleCredentialManager    1.0
com.apple.driver.DiskImages    389.1
com.apple.iokit.IOStorageFamily    2.0
com.apple.iokit.IOReportFamily    31
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    3.1
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.Libm    1
com.apple.kec.pthread    1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0

I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad

Macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was cancelled

macbook pro - iPhoto keep prompting to update after Yosemite update. Error message when trying to update -This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I only have 1 apple ID and the same was used to set up this early 2011 macbook pro and iPhoto app. I don't want to loose out on any photos. I tried logging out of app store and back in but no luck. PLEEAASEE HELPP!!!
This problem has been reported by quite a few forum members, who skipped the update to iPhoto 9.5.1 while running Mavericks. In that case try to purchase iPhoto again instead of updating.
After making your backup try the following:
Uninstall iPhoto by deleting it from the applications folder, but do not empty the Trash.
Launch the App Store, click the "Store" menu, and sign in with your AppleID.
Open the main page of the App Store and search for iPhoto.
If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
If it is not showing as free, there is no help but contacting the App Store Support, as Niel pointed out: http://www.apple.com/support/mac/app-store/contact/

My early 2008 Macbook Pro is suffering from black screen after Yosemite update

My early 2008 Macbook Pro is suffering from black screen after Yosemite update. It ran beta 5 great but failed on restart after beta 6 install. There is no cursor but I can hear the HDD spooling up. I have tried booting in safe mode, PRAM reset and SMC reset but nothing works. After the first 5 days of every now and then trying to start it, it started fine. I used the machine all day with no problems, it had rolled back the install and was back on beta 5. I decided to try the update again, the same thing happened and it has stayed black for over a week now. It wont work with a monitor either. Help!

Hello Adam,
I would try instead of installing the beta software, to install the official build of OS X Yosemite from the Mac App Store to see if that gets you passed the no video issue when updating the beta software.
How to install OS X Yosemite on your Mac
http://support.apple.com/en-us/HT6412
Regards,
-Norm G.

External usb microphone not working with FaceTime and mac mini with os x Yosemite

Hello
When I try to do a phone call with face time through my iphone 6 face time is not recognizing my external usb microphone connected to my mac mini. I have just updated my mac mini to os x Yosemite. If I go to the audio system preferences and look to the audio input signal I can see that the external microphone (SB Omni Surround 5.1) is working (audio input level is showing an input signal).
Can someone help. I saw that this was also an issue in the beta versions of Yosemite.
Thanks.
BR Stefan

Interesting. I don't have a USB mic on the Mac Pro. Its the OLD FireWire 300 iSight. It works for FaceTime calls but not the iPhone call via the FaceTime app.
I also have 2010 MBP that works perfectly, even since the first Public Beta. I'm to sure if that mic is considered an external USB device or not, or if it has to do with device signatures vs. external or internal. I would almost assume that the built-in mic is on the USB bus. How would it be any different than the external USB.
I think I have to agree that this is a point release bug. I have submitted a bug report at bugreport.apple.com, and would ask others to do the same, or at least post to apple.com/feedback. The more noise we make through process the more likely to get a fix in the .1 release.

I have 10.7.2 and the app store on mac mini says i need to update to that same number, and it is a long update why and what to do? applecare rep was rude and said it does not need it ? ignore? what to do?

about says i have 10.7.2 yet app store on mac mini says i need to update it,
what to do? applecare rep rude says ignore

i appreciate the help since Applecare is not helping,
and these replies have not helped, things have gotten worse,
first even though you tell me i dont need the update, i still don't like seeing
an update is available every time i go to macappstore,
next three times now I downloaded the update, it is the whole 3.79 gb Mac OS 10.7.2
i do the long download for the update,
and install and give whatever they ask in passwords etc,
then it reboots and go through all the new installation crap
that I need to do
it is getting to be like a Microsoft project here,
and i cannot get google to show me the way or Applecare
with the one year left on extended support, and these apple communities
don't get me wrong, i am greatful for any help,
especially since Apple care refuses to help,
when they are paid to help
you guys and gals are volunteers and mean well, even though you want to be right about what you say,
the point is it says I need an update for the 10.7.2 and won't give me the update
and take the update off,
now if you say it is something i do not need and it is a glitch with macappstore,
then why doesn't it get fixed or someone else complain about it?
sorry if this offends Apple Zealots which i am one,
I have a windows netbook but I am having more trouble with the latest mac and Icloud which I paid for extra service
and two iphones and i am frustrated, that on the iphone and itunes apps are missing and itunes does not have a direct chat line to help but that is for another forum, just putting it out there.

Is Mac MINI support WOL after shutdown completely

In PC environment,when the computer completely shutdown but connecting the power ,the lan card still have signal so that we can use the magic packet wake up
Is Mac MINI support WOL after shutdown completely?

No. The Wake on Network Access (WOL for PC terminology) only works if the Mac is sleeping, napping or hibernating.
Ity does not work for a shutdown state

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite

I'm having trouble connecting Brother DCP197c to Mac Mini - it worked before Yosemite.
I have downloaded drivers from Brother
I have tried searching for the printer once the drivers have been installed, but nothing...
Not sure what else to do - any helpful suggestions are welcome.
Thank you

I tried the Reset Printer option - it didn't work at first but then I decided to download the drivers again... and now all is fine and dandy.
Thanks for your help

Mac mini locks up after yosemite update

Similar Messages

Maybe you are looking for