Mac mini loses wifi connection when using vnc....

I currently dont have an aextra keyboard, mouse and monitor so for short term id like to connect remotely to it. I configured the sharing settings in system preferences on my mac. Im running Mac OS X Lion 10.7 and Im using tightvnc on my windows computer and its having a hard time getting connected to the mac mini. I notice when I try to connect my wifi connection on the mini drops. Can anyone tell me why this is? Any help would be greatly appreciated.
Thanks
Angelo

We'd need a Monitor & KB/Mouse on the Mini, or another Mac to log into it, but you might try navigation to...
/private/var/log folder on the Mac & maybe look at the system.log if you can on a PC.

Similar Messages

My Mac Mini loses wifi connectivity once every other hour...

I noticed last night that web pages in Safari weren't loading at all, and that my Internet kept disconnecting me every couple of minutes. I restarted Time Capsule thinking it was the culprit. A few minutes later, the same symptoms persisted. This time, I simply turned Mac Mini wifi off and on, and that seemed to temporarily work each time. So that led me to believe that Time Capsule was fine, and that something was happened to my Mac Mini that required me to disconnect and reconnect to the network. Today, I've purposely been streaming music from the web to see how long it takes to lose signal. It hasn't been every few minues like last night. However, it's been just about every two hours. I turn the Mac Mini wifi off then on - and it's fixed. So what might be causing this? I will say the Internet speed is great when it works. But it's either there - or it isn't.
Thank you!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

My imac loses wifi connection when it goes to sleep, how to correct?

My iMac loses wif connection when it goes to sleep. How do I correct?

Are you running OS X Lion? If so there are unfortunately numerous threads on here discussing exactly the same problem. So far there doesn't seem to be a definitive solution, with everyone hoping that Apple will come up with a permanent fix.
Here's a quick search of these forums alone - depressing reading:
https://discussions.apple.com/community/desktop_computers/search.jspa?peopleEnab led=true&userID=&containerType=&container=&spotlight=true&q=Massive%20wifi%20pro blem%20with%20Lion
This 'fix' has worked for a few people but, unfortunately, not everyone:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook

My ipad 1 loses wifi connections when it goes to sllep. have to go into settings to reconnect. Does this all the time. please help.

my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

Does 2012 mac mini get very hot when using logic pro

does 2012 mac mini get very hot when using logic pro

Are you saying that your machine does or is it an enquiry before buying ? I use a 2011 server model - well, it does get hot over a period of time, but I've very rarely heard the fan kick in, its a surprise when it does. As far as I know the casing has been specifically designed to conduct heat, rather than having any fancy grilles and so on, being so small in size. I haven't found it to be cause for concern, if that's any help.
Slidersson is in need of more cold showers.

Mac Mini gets wifi connection for 3 seconds, then drops it.

Hey all,
Long time listener, first time caller.
I'm running a 1.66 Mac Mini with 10.5.4 on it. My wifi network is based on a Comcast broadband connection and is broadcast through an 802.11g Airport Express. Also on the network are: a Macbook (3,1), my iBook G4 (1.33 ghz), my original iPhone, my Tivo, an HP desktop using an 802.11g wireless adapter and occasionally a Wii. All of these have great wifi connections, run fast and connect easily. The wifi is normally WEP ASCII 128 bit encrypted.
The Mac Mini, however, does not. The Mac Mini has been in several positions near my TV (This is what it uses as a monitor), but in most of these has had an extremely hard time finding the wifi network. This got a bit better after I removed all of it's locations, keychains and such and re-set-up everything. Except it still, whenever it connects, drops the web connection within about 10 seconds on an extremely good day. I'll select my network from the Airport drop down menu, it'll join happily, I'll click a bookmark and the page will load very slowly, get about halfway and then stop. Sometimes it'll just go straight to "You are not connected to the internet. (Network Diagnostics)" When I click network diagnostics, either Airport Settings or ISP has failed, but when I go through the process of trying to repair/diagnose the problem, suddenly they will all be working fine.
For what it's worth, I took it to the Genius Bar, and it worked amazingly well on the Apple Store Wifi.
Any thoughts?

I was having an identical issue with my Mini, and I have an eerily similar mix of devices on my network. Last night I went into my Airport Express configuration and changed the channel that it is broadcasting on (also turned on Interference Robustness) and everything is now working great. By default, my Airport channel was broadcasting on channel 1 - I changed it manually to channel 7, restarted the Airport and that did the trick. All of my macs (including the Mini), tivos and wii are now getting a stronger wireless signal since I changed the channel.

Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

2012 Mac Mini becoming very slow when using finder

Hi!
I've had my 2012 Mac Mini (10.9 Mavericks, Dual Booted W/ Windows) since February 2014 (Late to the party, I know) and, up until about a week ago, it was fine.
Then, all of a sudden, it starts being unusabley slow the moment I try to do anything in finder. Relaunching finder makes it a bit more bareable, and rebooting fixes it completely until I next open finder. I thought this may have been one of those rare times when a Mac gets a virus, however, AVG found nothing. The next thing I found was that it was to do with the fact that my hard drive was full (it was quite full) and that if I was using all of my 4GB of RAM that my Mac would use virtual memory, and that this would effect the speed if I didn't have a lot of HDD space. However, despite removing nearly 1/2 of the things on my HDD, the problem still persists. I have basically ruled out visiting "the local" apple store, as I'm in the middle of nowhere. the nearest one is around 3 hours away.
Thanks,
Dan

1. This is a comment on what you should—and should not—do to protect yourself from malicious software ("malware") that circulates on the Internet and gets onto a computer as an unintended consequence of the user's actions. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the computer, or who has been able to log in to it remotely. That threat is in a different category, and there's no easy way to defend against it.
If you find this comment too long or too technical, read only sections 5, 6, and 10.
OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user. Internally Apple calls it "XProtect."
The malware recognition database used by XProtect is automatically updated; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
As new versions of OS X are released, it's not clear whether Apple will indefinitely continue to maintain the XProtect database of older versions such as 10.6. The security of obsolete system versions may eventually be degraded. Security updates to the code of obsolete systems will stop being released at some point, and that may leave them open to other kinds of attack besides malware.
   3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
Apple has so far failed to revoke the codesigning certificates of some known abusers, thereby diluting the value of Gatekeeper and the Developer ID program. These failures don't involve App Store products, however.
   For the reasons given, App Store products, and—to a lesser extent—other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. Sandbox security is based on user input. Never click through any request for authorization without thinking.
4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is effective against known threats, but not against unknown ones. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
5. The built-in security features of OS X reduce the risk of malware attack, but they are not, and never will be, complete protection. Malware is a problem of human behavior, and a technological fix is not going to solve it. Trusting software to protect you will only make you more vulnerable.
The best defense is always going to be your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "Trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the scam artists. If you're smarter than they think you are, you'll win. That means, in practice, that you always stay within a safe harbor of computing practices. How do you know when you're leaving the safe harbor? Below are some warning signs of danger.
Software from an untrustworthy source
Software of any kind is distributed via BitTorrent. or Usenet, or on a website that also distributes pirated music or movies.
Software with a corporate brand, such as Adobe Flash Player, doesn't come directly from the developer’s website. Do not trust an alert from any website to update Flash, your browser, or anything else.
Rogue websites such as Softonic and CNET Download distribute free applications that have been packaged in a superfluous "installer."
The software is advertised by means of spam or intrusive web ads. Any ad, on any site, that includes a direct link to a download should be ignored.
Software that is plainly illegal or does something illegal
High-priced commercial software such as Photoshop is "cracked" or "free."
An application helps you to infringe copyright, for instance by circumventing the copy protection on commercial software, or saving streamed media for reuse without permission.
Conditional or unsolicited offers from strangers
A telephone caller or a web page tells you that you have a “virus” and offers to help you remove it. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
A web site offers free content such as video or music, but to use it you must install a “codec,” “plug-in,” "player," "downloader," "extractor," or “certificate” that comes from that same site, or an unknown one.
You win a prize in a contest you never entered.
Someone on a message board such as this one is eager to help you, but only if you download an application of his choosing.
A "FREE WI-FI !!!" network advertises itself in a public place such as an airport, but is not provided by the management.
Anything online that you would expect to pay for is "free."
Unexpected events
You open what you think is a document and get an alert that it's "an application downloaded from the Internet." Click Cancel and delete the file. Even if you don't get the alert, you should still delete any file that isn't what you expected it to be.
An application does something you don't expect, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
Software is attached to email that you didn't request, even if it comes (or seems to come) from someone you trust.
I don't say that leaving the safe harbor just once will necessarily result in disaster, but making a habit of it will weaken your defenses against malware attack. Any of the above scenarios should, at the very least, make you uncomfortable.
   6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it—not JavaScript—in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Stay within the safe harbor, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself.
7. Never install any commercial "anti-virus" (AV) or "Internet security" products for the Mac, as they are all worse than useless. If you need to be able to detect Windows malware in your files, use one of the free security apps in the Mac App Store—nothing else.
Why shouldn't you use commercial AV products?
To recognize malware, the software depends on a database of known threats, which is always at least a day out of date. This technique is a proven failure, as a major AV software vendor has admitted. Most attacks are "zero-day"—that is, previously unknown. Recognition-based AV does not defend against such attacks, and the enterprise IT industry is coming to the realization that traditional AV software is worthless.
Its design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, commercial AV software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
Most importantly, a false sense of security is dangerous.
8. An AV product from the App Store, such as "ClamXav," has the same drawback as the commercial suites of being always out of date, but it does not inject low-level code into the operating system. That doesn't mean it's entirely harmless. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
An AV app is not needed, and cannot be relied upon, for protection against OS X malware. It's useful, if at all, only for detecting Windows malware, and even for that use it's not really effective, because new Windows malware is emerging much faster than OS X malware.
Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else. A malicious attachment in email is usually easy to recognize by the name alone. An actual example:
London Terror Moovie.avi [124 spaces] Checked By Norton Antivirus.exe
You don't need software to tell you that's a Windows trojan. Software may be able to tell you which trojan it is, but who cares? In practice, there's no reason to use recognition software unless an institutional policy requires it. Windows malware is so widespread that you should assume it's in every email attachment until proven otherwise. Nevertheless, ClamXav or a similar product from the App Store may serve a purpose if it satisfies an ill-informed network administrator who says you must run some kind of AV application. It's free and it won't handicap the system.
The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have all the disadvantages mentioned in section 7.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
10. As a Mac user you don't have to live in fear that your computer may be infected every time you install software, read email, or visit a web page. But neither should you assume that you will always be safe from exploitation, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

Ipad Mini loses wifi connection

Ipad mini, 64 GB, wifi only, brand new...I enable the internet sharing from my Mac to connect. All was fine for two weeks then today the Mini keeps dropping my wifi connection. I have reset the network settings, turned it off and on, airplane mode off/on, wifi off/on, "forgot this network" then connected again, also renewed lease. It will connect for a few minutes, then disconnect. Seems a lot of people are having this issue. Anybody have another fix? Please help this is so frustrating. Before this I was streaming Netflix with no problem.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Wrt54gs loses internet connection when using P2P Ares

I have a wrt54gs v5 and I've installed the latest firmware and reset back to factory then reconfigured. Whenever Ares is started all other computers (wired or wireless) lose their inet connection. Within 2-5 minutes of stopping Ares everything starts working again. I've checked Ares and it's set to am max of 10 connections.
I've hooked up my old befsx41 and it works fine but I need the wireless. Both of these are talking to a befcmu10 cable modem. I've never had problems with linksys before but from what I'm seeing on the forums the wrt54xxx doesn't seem to be of the same quality as the oldser stuff. Anyone know of any specific versions that fix this?
(Mod Note: Edited for guideline compliance. Thanks!)
Message Edited by Maximus on 07-04-2007 02:13 PM

Since your BEF works with P2P, why don't you simply convert your WRT into a WAP (wireless access point). This way you will use the wireless of the WRT, while using the BEF to handle all the routing chores.
To do this, setup the BEF as your primary router.
Then wire one computer to port 1 (not the Internet port) on the WRT. (Note: Disconnect everything else from the WRT at this time.)
Then in the WRT do the following:
Turn off the DHCP server.
Set the "Local IP address" to 192.168.1.2 (assuming no other device on your network is using this fixed LAN IP address, and assuming the BEF is set to use the 192.168.1.x address space.)
Save your settings. Power down the WRT.
Next, connect any numbered port on the WRT to any numbered port on the BEF. Do not connect anything to the Internet port on the WRT.
The BEF will control your router settings (DHCP server, port forwarding, etc.)
The WRT will control your wireless settings.
Please let me know whether this setup allows your P2P to work properly.

MacBook Pro os 10.8.5 loses wifi connection when going to sleep

Hi all. I've a domestic wifi network with 3 Macs, 1 Xbox and 3 Android mobiles.
Only the two MBP with OS 10.8.5 have the same problem: when gone to sleep, they do not re-find the network after waking up. I've to make them search for it manually (they find it immediately, then).
Any suggestion?

Hi all. I've a domestic wifi network with 3 Macs, 1 Xbox and 3 Android mobiles.
Only the two MBP with OS 10.8.5 have the same problem: when gone to sleep, they do not re-find the network after waking up. I've to make them search for it manually (they find it immediately, then).
Any suggestion?

IPad loses wifi connection when SSID broadcast is disabled

Has anyone experienced this? what is the fix?

Do all the configuring while SSID broadcast is enabled. Make sure the computer connects. And make sure it connects automatically when the network is in range. Once you have established that, turn off the SSID broadcast and see if it is still working.

My mac mini loses connection with my receiver after turning off the receiver then back on

My Mac Mini loses connection with my Onkyo receiver NR-609 after turning off the receiver then back on. The only way to reistablish the connection is to unplug then replug the HDMI cable to the Mac Mini. There's no effect if I unplug then replug the HDMI to the receiver. Any help or suggestions would be appreciated. I've searched a lot but haven't found much of anything so if this is covered elsewhere I would greatly appreciate a link.
Thanks in advance

Hi and thanks. I don't know about the audio prefs. When it happens I am not able to see or hear anything from the computer until I un/re-plug the HDMI to the Mini. I'm not sure it's changing to something else because there's nothing else connected for it to change to. I could see that perhaps the audio will change to the Mac Mini's internal speaker.
I found out last night that if, after I lose the signal, I use my ipad to play a video on the Mac Mini using the Remote app and home sharing the signal gets righted and I can see/hear the computer again. It's quite an inconvenient fix though and I wish and hope someone here can help me.

Mac mini does not connect to the internet via wifi

I currently have a Mac mini that cannot connect to the internet. I also have an iPad that is connected to the same router/modem wirelessly. I have tried the network diagnostic in the network utility app. It is showing I'm connected with green dots.. But still no luck.
Yes I tried calling the ISP, there was some issues with the service but they fixed that and it was working just fine a few hours ago but then later in the evening it stopped connecting. I know my router modem is working because I'm typing this with my iPad ..
Im going to call apple tomorrow and try to get another modem router as we'll. Just thought I would try here also..
if i if I have to restore my Mac mini to factory, will there be a way to keep my iTunes music .. .?
thanks

If yo go to Network Preferences>Wifi what IP address is specified? It should be like 192.168.1.X.
Try creating a new location and jointing the wifi network again
Using network locations (Mac OS X v10.6 and later)

HT4628 I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

I have Mac Mini that I connect wirelessly. I want to share that internet on this mac mini with my receiver using wired internet. Is it possible? How?

Is it the same user/iTunes account or...?
Syncing to a new computer should give you the opportunity to replace the exisiting contents with the new.

Mac mini loses wifi connection when using vnc....

Similar Messages

Maybe you are looking for