Mac Mini max resolutions for 2 screens?

Hi all. I have the latest Mac Mini and I'm currently running a Samsung 24" at 1920x1080 from the Mini Displayport socket via a DVI adaptor, and also a second display at 1280x1024 from the HDMI socket via DVI adaptor.
I'm looking to upgrade the Samsung to a screen that's 1920x1200 resolution - I'm assuming the Mini can handle this slight increase but I can't find specs anywhere for this. Would it even run a 2560x1600 screen alongside the 1280x1024 one?
Many thanks in advance.

The > Mac mini (Late 2012) - Technical Specifications doesn't clearly state what the maximum resolution for each output is.
Funny part is, that the Spec's for the previous Mac Mini 2010 and 2011 models does.
One would think that they are the same? Unfortunately that would be pure speculation and contrary to the ASC Terms of Use.
On that note: Your best bet might be to > Contact Apple Support and get some clarification.

Similar Messages

  • Mac Mini Max Resolution?;CRT

    I just bought a Mac mini and am looking to buy a CRT. What are the max resolutions the mini can support? (VGA analog, not DVI digital)
    And, if the mini's supported refresh rate for a given size is say 100Hz and the CRT is only 70 Hz, will it still work?

    For DVI it'll go up to 1920x1200. For VGA, probably higher, though I doubt it really matters at that point. For the refresh rate, you can lower it on the Mac, so it shouldn't be a problem.

  • Is it right to mix sizes of memory modules in a mac mini 2012? for example 2Gb 8Gb?

    Is it right to mix sizes of memory modules in a mac mini 2012? for example 2Gb 8Gb?

    Welcome to the Apple Support Communities
    You can do that without any problem, always that the total amount of memory is less than the maximum memory your Mac mini supports. A Late 2012 Mac mini supports 16 GB of memory, and you can find in this site the steps to install more memory > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US#1

  • T400s max resolution for external monitor ?

    Hello
    What is the max resolution for an external monitor connected to a thinkpad t400s  ? The reason i am asking is that:
    a) Intel says:  the max resolution of Graphics Media Accelerator 4500MHD is 2048x1536
    b) Lenovo says:  DisplayPort + D-sub dual-display output support 2560×1600 maximum resolution
    What are your experiences and what maximum resolutions on external monitors have you succesfuly tried in real life ?
    Would it be possible to connect a 30" monitor at 2560x1600  to a thinkpad t400s ?

    i don't know and i never tried but i'm inclined to trust intel more than lenovo on this...unless the t400s has some beefed-up x4500mhd
    T400s - 2815RW1 + Win7 Ultimate
    Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

  • What cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

    what cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

    You need either a FireWire 800 to FW 400 cable or a FR 800 (male)/FW(female) adopter.
    However. it the Mini (note that you still have the late 2012 Mini, Apple has not updated the Mini since then) has Mavericks it may not work satisfactorily. I tried it on my 2102 and I get abount 1 frame every 20 seconds. Another uses posted same problem.
    However, it it work fine on my late 2009 Mini with Mavericks

  • T510 w/ NVS 3100m can't show max resolution for a dell 30Inch

    T510 Docked
    Windows 7 64bit
    Dual-Link Cable attached to Dell 3007WFP monitor.
    Max Resolution is 1280x800
    Ironically, I have a second monitor attached on the DVI port 2 Single Link and this is 1600x1200
    NVIDIA NVS 3100m
    Why can't this display the max resolution for this monitor.
    I have the latest drivers

    sonniep5 wrote:
    I had same issue, tech support advised me to return T510 since it didn't ship what I ordered. In my case the resolution should be 1920x1080.
    you are talking about the FHD on the T510, this is slightly different to what the OP is asking. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Min/max temperatires for all stations on computer.

    iMac, Intel 2/2, 6mb, L2Cache_4g, 1.33ghz, 10.6.8 Snow Leopard
    I've lately become aware of the presence of a temperature report on my Dashboard and wonder where I can find the Min/Max status for all my heat situations.
    .....goldie

    Anyone able to help with this?
    Regards
    Richard

  • At every startup, Mac mini desktop freezes for 10 mins before I can start any program, what should I do?

    At every startup, Mac mini desktop freezes for 10 mins before I can start any program, what should I do? The mouse cursor can move around, but the icons are not responding at all. Can't click on anything during the "freezing" period, and this "freezing" happened with every startup. Waking up from sleep mode is OK. Also the systems crashed frequently with any flash-player required pages in web browser. What's wrong??

    Hey,
    Repair Disk permisions...
    Applications > Utilities > Disk utility > Select your Mac OS Hard Drive on the left > Click Repair Permissions.
    Jason

  • What is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?

    I currently have a 2011 Mac Mini Server. When using FCP X, what is the biggest bottleneck on this machine - CPU, GPU, RAM (now at 8GB), or the HD, and would I be better getting a current 27" iMac, a 2012 Mac Mini, or SSDs for my current Mini?
    Thanks people,
    TZ

    Hi Tom,
    I just wanted to ask you about what you said about the color correction. To be quite honest I'm not sure what the best workflow is, and I haven't gotten my feet wet in multi-cam editing. Basically my work-flow has been.
    1) Import from the camera as optimized media - I found that adding color-correction at the import stage cause a severe hang with my tape-based Canon unit.
    2) Color-correct the imported files before loading any files into a project
    3) Drag files onto the timeline
    4) Click on the color-correction box
    5) Start editing - Usually I have one camera zoomed a little tighter on the singer, one on the whole band, and my iPad or iPhone camera at different angles so I start cutting things according to who is the focus of the moment, add a Ken Burns effect every here and there, Titles, an occassional transition effect.
    6) Add music effects after the looks are taken care of
    7) Export
    Are you recommending clicking on the color-correction box after everything is done?
    Thanks - TZ

  • How to set physical min/max values for a scale in xy graph?

    Hello,
    I have troubles with the way LabView handles physical units in xy graphs. In particular, I use a time scale for the x axis.
    The values are timestamps and have the unit [s]. Now I want to read write the min max values for this scale via
    property nodes. It seems that the properties for min max do not support the use of the unit I use for the data for
    that same axis. This is very inconvenient and I am not even sure which kind of data to use at all for this properties.
    Is it simply converting to/from [s] using the unit converter?
    (I am using LabView 7.1 for the programm in question).
    Thanks,
    Olaf

    Hi Olaf
    "It seems that the properties for min max do not support the use of the unit I use for the data for that same axis."  
    What are the units you are using? can you make it a littlebit clear.
    You can change the units also using Property node.
    Just check the attachment once. If that is what you are looking for, then the problem is solved.
    Regards
    Anil
    Message Edited by reddy on 05-23-2006 05:25 AM
    Message Edited by reddy on 05-23-2006 05:27 AM
    Attachments:
    X-Scale.jpg ‏8 KB

  • Enable High Resolution for Retina Screen

    Version 11.0.0 downloaded from Creative Cloud on iMac 5K Retina screen (Yosemite). Acrobat Pro opens in Low Resolution - all text.images appears blurred/bitmapped/low resolution.
    On looking at the applications info: 'Open in low resolution' is ticked and dimmed, so it can't be changed.
    I've seen a couple of hacks to fix this, one of which states you should go into the Contents/info.plist and add <key>NSHighResolutionCapable</key>
    <string>True</string> just before </dict>
    I'm not keen to do this, plus sounds like it will be glitchy.
    Please would the next update allow high resolution for Retina screens. Thanks.

    Big thanks Adobe, a day later, you release 11.0.09 which has fixed this issue.

  • Mac Mini / 23" Display / 10.5 - Screen resolution splits in half

    Hey All,
    I'm using a Mac Mini with a 23" aluminum display.
    Recently installed Leopard on it, and now I'm having a really funny issue:
    When I try and restore a window that has been minimized to the dock, the window does restore as its supposed to, and then for a split second, the display seems to swap the left and right side of my display. It almost looks like the image slides to the side 50%. So the pieces of my screen that were at the edges of the display, temporarily meet in the middle.
    It then switches immediately back.
    I think this might happen at other times too, but its 100% reproducible when restoring a minimized window.
    Any thoughts?
    Best,
    Robert

    I reported the same problem in another thread before.
    I also have a G4 Mini, and I also have this exact same issue with a 3rd party (Dell 24") screen. It's not related to the screen or output (happens with the DVI and analog connection) but probably a memory issue with the video chip (out of memory maybe?)
    It seems to happen only at the highest resolutions (I run 1920x1200, and have also seen it happen at 1920x1080). 1680x1050 and smaller works fine.
    I hope it's a bug that can be fixed, since Tiger had no problems at all.

  • Mac mini stuck at start up screen for the 3rd time

    My 2011 Mac mini gets stuck at the boot up screen and this is the 3rd time it has happened what do I do

    Unplug everything except power. Certain peripherals cause this. Return it!

  • Mac Mini DVI to HDMI (blank screen, "no signal")

    I have an older Mac Mini with just DVI.  I bought a Monster Cable DVI to HDMI adapter (http://www.monstercable.com/productdisplay.asp?pin=4596) trying to hook up to a Samsung 46" LCD TV.  All i see is a black screen with "No Signal".  What am I doing wrong?  This worked when I had a straight DVI to HDMI cable (from MonoPrice).

    Just to update this:
    Got my DVI to HDMI cable today!
    Plugged it in, booted her up and was presented with a perfect 1080p HDMI signal without having to alter any display settings.
    Fantastic!
    In my display menu I have 10 resolutions to play with with , 3 of which are full 1080p, one is specifically for PAL tv in the UK.
    Couldn't be happier!
    Hope this thread helps anybody who is having any connecting woes between their mac mini and their sharp TV
    Thanks
    David

  • Mac mini monitor resolution

    Hello,
    I bought my mac mini today ( 2.6GHz dual-core Intel Core i5 - Intel Iris Graphics - OS X Yosemite ) I connected using the DisplayPort DVI cable to my Viewsonic vx992 monitor. I have been using this monitor for my Windows XP which used to give me 1280x1024 resolution.
    When I connect the new Mac to my screen is work but I with poor monitor resolution .. It's 1280x1024 but poor not clear
    I'v been used this monitor with Windows with the same resolution and the monitor resolution was excellent with Windows.
    I connected the Mac with Samsung Smart TV via HD cable .. The monitor resolution is excellent
    This is the converter that I used:
    http://www.amazon.com/gp/product/B007KB0EGC/ref=oh_aui_detailpage_o00_s00?ie=UTF 8&psc=1
    Now, I'm conflict .. Is the problem with the convert that I'v been used or from the monitor ??

    Hi IIIaass
    I don't know if the screenshot will showing you the noise that I talk about ,, there is a little noise in the text for example .. I work for while on my monitor and I know the resolution quality and the clarity that should be,, and I don't want to buy new monitor then I discovered that the problem was from the Adapter.
    Thanks again .. and please tell me what's the best HDMI converter to DVI if you know about it.

Maybe you are looking for

  • How to create a Playlist in flash Streaming Server

    Hi all,         am new in the flash streaming server. I download the Flash streaming server and install it its work fine. I want know about the following question:           how to stream the video using playlist?           What is the format of the

  • Error when adding new user in account admin

    I am logged in using an administrators account and want to add a new user. Whenever I type in the email address that I require, it says 'Sorry! An error has occurred. Please try again'. What is this error all about and how do I add a new user?? Thank

  • Why is saving QT Movies, with QT Pro, Still Disabled in Safari 4?

    I have QT Pro, it saves movies in FF. I noticed this capability disappeared in Safari 4 Beta, while is it still gone? Am I missing a preference setting. Again I have QT Pro and should be able to save QT movies in kiosk in Safari 4. Thanks

  • OIM 11g recon error

    Hi All I have a custom target recon job. When the job runs for the first time, recon events are created and processed, but when I run the following query, I don't see the events getting completed: select rb_key, rb_batch_status, rb_profile_name from

  • Cache Connectivity Test

    Hi XI Guru's , Currently i am working on a scenario JDBC-RFC-JDBC scenario using a BPM. Issues i am facing.... 1. I have made the polling interval from source table to 10 secs, but i can see table is not getting polled in 10 secs. 2. On running Cache