Mac Mini Mid 2011 Ram Upgrade to Clock 1600mhz...?

I intend to upgrade the Memory on my Mac Mini Mid 2011 to 8gb. Question here is its currently running Two 1gb Chips at 1333mhz and I was wondering if I could get Two 4gb Chips at 1600mhz and have them mounted...?
Is that possible or will I have to stick to a 1333mhz Module...?

Stick with the recommended RAM for the computer.......
.....make sure your mini will not go past 8GB.....
http://eshop.macsales.com/shop/mac-mini/

Similar Messages

Mac Mini (mid 2011) ram slot has failed: Any others experiencing?

This seems similar to this problem, mentioned in a number of threads covering MacBooks, best described here: MacBook Pro loses access to 1 memory slot upon shutdown or reboot in OS X 10.8.1
I'm having the same issue with a Mid-2011 Mac Mini (purchased June 2013). As in that linked tread, overheating after OS upgrade (in my case , Mavericks) seems to be related. I had constant crashes at sleep beginning about three weeks ago, and three tones at boot. For about two weeks I could get it to reboot by unplugging and giving it some time. Until today. Cleaned. Tested both chips in both possible slots, but will always get three tones when either chip is in top slot, fine when that slot is empty. Hardware test appears to just ignore an empty slot, so really not helpful (and won't boot with filled slot).
It appears the only real fix is a new logic board, which appears is almost as expensive as buying a new machine.
I'm not going to get into "loosening screws" as suggested in linked discussion, but that may work for a powerbook.
It does sounds like heat related warping. I saw early heating problems with this after 10.9.5 upgrade. Ended up building a special vertical stand (Mini's venting is rather poor) and installed "Temperature Monitor" by Marcel Bresink Software, which I recommend, and uninstalled some things (including killing a Mac update process that was running constantly) . This got the heat under control, but it looks like the damage was done. Now I'm running on one 8gb memory chip, which dramatically shortens the life of the machine. It won't be a candidate for a Yosemite upgrade coming shortly.
Must say I'm pretty disappointed in "Apple quality". Had similar experience (repeated shorts of logic board, replaced 3 times) with a MacBook c.1997, when Apple Co. was looking like it might not survive, and lots of folks were having such problems. But at least then they would repair it for free. Given the premium price (without premium quality), I think this will be my last Mac, after having started with a Plus in the 1980s.

Mac Mini mid 2011, installed 2x 4GB memory when first got this machine, has worked well till this year 2015 when it slowed way down and I found memory slot #2 was not working. I swapped the cards and also reinstalled the original mac memory, still only half of the memory is detected in one slot. It is always the same slot, not dependent on the memory card. A mac mini which never gets moved. Mar. 2, 2015

Mac mini (mid 2010) RAM upgrade 4GB or 8GB

I have a mid 2010 Mac mini with 2GB of RAM. My question is - Should I upgrade the RAM to 4GB or 8GB?
Thank you, DZetko

It's is better to go for the full 8GB upgrade now,
that way you will not have to upgrade again when OS X and your personal usage demand more.

Mac Mini MID 2010 RAM UPGRADE... 1066 or 1330 GHRZ?

Hi
I had read something about upgrading the mac mini`s ram and some people had upgrade it with 1,3Ghrz of speed, but is not that clear. (DDR3)
I want to know opinions about this, cuz the 1,3ghrz of ram are more frequently found on PC hardware stores instead the 1ghrz... (there is 0,8ghrz of ram, but I think they are pretty slow for the mini)
my last question is about how much is recommended to upgrade... 8gb or 4gb... i usually use my Mini to edit video with iMovie and gaming (Steam, or League Of Leguends)

I am sure Ronda has tracked you down, there is a party in your honor around the Water Cooler in the Lounge. You should have a link to it eventually. It will be going strong by the time you arrive in the next day or so!
¡Felicidades!
Dah•veed

I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

Welcome to Apple Support Communities
The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

8 GB RAM for Mac Mini Mid-2011?

I am looking for the correct version to install in my Mac Mini 2011. I found http://www.amazon.com/Crucial-PC3-10600-SODIMM-204-Pin-CT2C4G3S1339M/dp/B008LTBI T4/ is that the correct version that is compatable with my device?

check out > Mac mini (Mid 2011): Memory specifications and upgrades - Apple Support
FWIW I will only buy RAM straight from Crucial or OWC.
try > http://www.crucial.com/usa/en/compatible-upgrade-for/Apple/mac-mini-%28mid-2011% 29
or > http://eshop.macsales.com/shop/mac-mini/

Mac Mini mid.2011 8GB to 16GB RAM,is it possible?

Hello everybody, could you please assist to resolve my question. (sorry for my bad english) ok, lets try)) - i have mac mini mid.2011,i5 2.3GHz,8RAM,IntelHD3000-256MB,Mavericks. i want to upgrade my RAM 1333Mhz DDR3 from 8 GM to 16GB. will it work?
Best Regards, N
e-mail: [email protected]

Yes, you can go up to the max of 16GB on your Mac Mini.
See Crucial.com's page for compatibility.

Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade

I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM. I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly. It's unusable to say the least. Is there anything I can do to speed it up? There must be a reason why the performance is so bad.
Problem description:
Slow after Yosemite upgrade.
EtreCheck version: 2.1.8 (121)
Report generated 1 March 2015 8:48:15 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac mini (Mid 2011) (Technical Specifications)
    Mac mini - model: Macmini5,2
    1 2.7 GHz Intel Core i7 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 6630M - VRAM: 256 MB
        Thunderbolt Display 2560 x 1440
        DX80 spdisplays_1080p
System Software: ℹ️
    OS X 10.10.1 (14B25) - Time since boot: 12:20:13
Disk Information: ℹ️
    Hitachi HTS727575A9E362 disk0 : (750.16 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 749.30 GB Online
USB Information: ℹ️
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Inc. iPad
    Apple Inc. Apple Thunderbolt Display
    Apple Inc. FaceTime HD Camera (Display)
    Apple Inc. Display Audio
Firewire Information: ℹ️
    BUFFALO INC. HDD 800mbit - 800mbit max
        EFI (disk2s1) <not mounted> : 210 MB
        ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
        Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
    [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
        /System/Library/Extensions
    [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
    [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.sophos.uiserver.plist [Click for support]
    [running]    net.culater.SIMBL.Agent.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
    [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
    [running]    org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
    [loaded]    org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.fitbit.galileod.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [running]    com.sophos.common.servicemanager.plist [Click for support]
    [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
    [running]    com.google.Chrome.framework.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    Google Drive    Application (/Applications/Google Drive.app)
    Dropbox    Application (/Applications/Dropbox.app)
    SpiderOak    Application (/Applications/SpiderOak.app)
    AirServer    Application Hidden (/Applications/AirServer.app)
    Plex Media Server    Application (/Applications/Plex Media Server.app)
    Box Sync    Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
    GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 7 Update 21 Check version
User internet Plug-ins: ℹ️
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    1Password
    AdBlock
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GPGPreferences [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
    Destinations:
        ext2tb [Local]
        Total size: 2.00 TB
        Total number of backups: 38
        Oldest backup: 2012-10-07 09:09:10 +0000
        Last backup: 2015-03-01 09:07:46 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 197.68 GB X 3)
Top Processes by CPU: ℹ️
        40%    WindowServer
        12%    firefox
         2%    Activity Monitor
         1%    Box Sync Monitor
         1%    sysmond
Top Processes by Memory: ℹ️
    533 MB    mds_stores
    498 MB    firefox
    429 MB    softwareupdated
    172 MB    InterCheck
    155 MB    SpiderOak
Virtual Memory Information: ℹ️
    8.58 GB    Free RAM
    4.31 GB    Active RAM
    2.49 GB    Inactive RAM
    1.79 GB    Wired RAM
    10.08 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 1, 2015, 08:38:46 PM    /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
    Mar 1, 2015, 08:30:37 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
    Mar 1, 2015, 04:42:31 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
    Mar 1, 2015, 08:26:20 AM    Self test - passed

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Mac Mini MID 2011 2.5GHZ with 8GB of RAM from 4GB

Hello Everyone!
So I want to upgrade my Mac Mini MID 2011 2.5GHZ with 8GB of RAM from 4GB.
Mac Mini Hardware Summary
Mid 2011
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Model Name:     Mac mini
Model Identifier:     Macmini5,2
Processor Name:     Intel Core i5
Processor Speed:     2.5 GHz
Number of Processors:     1
Total Number of Cores:     2
L2 Cache (per Core):     256 KB
L3 Cache:     3 MB
Memory:     4 GB
Kindly suggets to us , 8 GB ,DDR3 1600 MHz Momary will work on same.
Thanks
Ajay Kumar Gola

http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3_1333
I would opt for one 8 GB stick so you would have 10 GB. total. This says really no practical advantage in dual channel memory
http://www.reddit.com/r/buildapc/comments/1fcs77/discussion_ram_single_vs_dual_c hannel_speed/

Is that true, use 16 Ggo RAM on mac mini mid 2011?

is that true, to use 16 Ggo RAM on mac mini mid 2011?

macsales.com (other world computing) is a good source for quality RAM and says "yes": http://eshop.macsales.com/shop/mac-mini/
crucial.com is another trusted source of RAM.
Be sure you get the correct RAM as advised by the website and do not try faster RAM.
ifixit.com shows you how to install it: http://www.ifixit.com/Device/Mac_Mini_Mid_2011

Does a 500 GB SSD work in a Mac Mini (mid 2011)?

I have a Mac Mini (mid 2011), 2.5 GHz and 4 GB of memory.
The iOS app called MacTracker says that this model is "configurable to 256 GB solid-state drive or 256 GB solid-state drive and 750 GB (7200-rpm) hard drive".
I was thinking about buying a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive. My doubt is: will it work in my Mac Mini or the maximum storage must be 256 GB? If it runs a 500 GB SSD, a Samsung EVO SSD would be a possible (or a perfect) choice?

The info from MacTracker brings up the options available in a Configuration to Order
at the time the product was new; so that tells people who may have found their unit
bought with odd specs, such upgrade may be due to a CTO Apple factory upgrade.
Other options that can work, of even higher spec capacity, can be researched in
such mac-centric sites as macsales.com and others who have a reputation for
customer service and quality products; many have information on their sites...
Doesn't hurt to ask. OWC macsales may even have an online chat. Info on how
to upgrade Apple products with later parts (out of warranty, etc) is available in
their page as well as iFixit.com guides. Everymac.com also offers spec info.
Good luck & happy computing!

Highest dual display resolution for mac mini mid 2011

I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
I am going to connect the screens in the following way:
1x mini-dvi - HDMI to one screen.
1x HDMI - HDMI to the other screen.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Thanks in advance
Rich

According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
"Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
That should mean it should be able to support it, but I don't know : <
HDMI version
1.0
1.1
1.2
1.3
1.4
2.0
Date initially released
December 9, 2002
May 20, 2004
August 8, 2005
June 22, 2006
May 28, 2009
September 12, 2013
Maximum clock rate (MHz)
165
165
165
340
340[109]
600
Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
1.65
1.65
1.65
3.40
3.40
6
Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
4.95
4.95
4.95
10.2
10.2
18
Maximum throughput (Gbit/s) with 8b/10b overhead removed
3.96
3.96
3.96
8.16
8.16
14.4
Maximum audio throughput (Mbit/s)
36.86
36.86
36.86
36.86
36.86
Maximum color depth (bit/px)
24
24
24
48[a]
48
Maximum resolution over single link at 24-bit/px[b]
1920×1200p60
1920×1200p60
1920×1200p60
2560×1600p75
4096×2160p24
4096×2160p60
Maximum resolution over single link at 30-bit/px[c]
N/A
N/A
N/A
2560×1600p60
4096×2160p24
Maximum resolution over single link at 36-bit/px[d]
N/A
N/A
N/A
1920×1200p75
4096×2160p24
Maximum resolution over single link at 48-bit/px[e]
N/A
N/A
N/A
1920×1200p60
1920×1200p60
Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
N/A
N/A
N/A
N/A
1920×1200p60

Mac mini mid 2011 and logic pro 9 in 64-bit?

Hi,
I have a mac mini mid 2011 with a 2.7HGz intel core i7 processor and 8 GB of RAM. I have been using Logic Pro 9 in 32-bit mode and tried switching to 64-bit mode. I unchecked the "open in 32-bit mode" in the "get inf" section, but logic still opens in 32-bit mode.
My question is: Can my computer run Logic Pro 9 in 64-bit mode???
Thankyou!

Hi there jdtay2,
It looks like your model of Mac Mini does have a 64-bit processor according to the article "How to tell if your Intel-based Mac has a 32-bit or 64-bit processor"
Processor Name
32- or 64-bit
Intel Core Solo
32 bit
Intel Core Duo
32 bit
Intel Core 2 Duo
64 bit
Intel Quad-Core Xeon
64 bit
Dual-Core Intel Xeon
64 bit
Quad-Core Intel Xeon
64 bit
Core i3
64 bit
Core i5
64 bit
Core i7
64 bit
As far as opening Logic Pro in 64-bit mode, you will first want to make sure that you have the most updated version, as 64-bit support was added in the v9.1 update. The article below has more information about Logic Pro and 64-bit mode.
Logic Pro and MainStage 64-bit mode FAQ
http://support.apple.com/kb/ht3989
-Hope that helps,
Griff W.

Mac Mini (mid 2011) Display Issues

Hello.
Recently I started having some issues with the display from my Mac Mini (mid 2011, core i7, 8GB, OS X 10.9). During usage the screen started flickering erratically and then went blank. I turned the Mac off and found that it was very hot so I removed the bottom cover and the RAM chips and gave it a bit of a clean (it was quite dusty) then I allowed it to cool before putting it back together. After putting it back together it worked for about a day until it had the same problem.
Now on startup the following occurs:
1. On the start-up screen (where the Apple logo is displayed) the screen is overwhelmingly pink (display RGB settings are fine), except for the left half of the Apple logo which remains grey.
2. After progressing through the start-up screen the display goes white and nothing further happens.
I have checked the display and it works fine. The HDMI cable is not the issue either.
Does anyone have any ideas as to what might be causing this and a possible fix?
If it is of any help the monitor is an ASUS MT276H.
Thanks.

So I have tried a SMC reset and all that has changed is the front indicator light is off and the fan has kicked it up to 11. Please find a picture of the display I described earlier at the following link: https://www.dropbox.com/s/wirrc01xut3p8tx/Photo%201-12-2013%2010%2054%2004%20pm. jpg (sorry it was taken with an iPhone 4).
I have never performed an SMC reset before but it seems like it is taking a long time and/or not working. I'm at a loss to what this might be.

Mac mini mid 2011 won't boot

This morning I found my Mac mini mid 2011 frozen. I shut it down by holding the power button.
Now it does not boot. When I turn it on I don't hear the usual chime sound or any other beeps. I can hear the hard drive powering on and the fan starts to work at full speed. Nothing appears on the monitor. No output signal at all.
I have tried disconnecting all cables, press power button for five seconds and the. Try to boot again. No luck...
Any ideas?? I loads of work to do and I am loosing hope. No apple stores in Greece to take it in...

I've tried everything including SMC rreset. No luck.
One other clue is that if try to boot up without Ram installed, it recognizes that ram is missing and beeps
so to summarize the symptoms:
1. Computer has power
2. No chime sound or any other beep when I power the computer on
3. Fan works at full speed
4. No output display signal
5. I can hear the hard drive powering on
6. The computer recognizes if you try to boot it without ram and beeps

Mac Mini Mid 2011 Ram Upgrade to Clock 1600mhz...?

Similar Messages

Maybe you are looking for