Mac mini mid 2011 video blinking out too

As the 2012 mac mini, my mac mini mid 2011 with the 3000 graphics chipset, has video blinking out every hour for about a second, since I upgraded from an ancient cinema display (1600x1040) to a DELL U2713HM 2560x1440 pixels. The old display blinked very rarely too, which I thought to be dips in the grid. The new display blacks out every hour for 1-2 seconds. And when the machine is heavily loaded (xcode indexing 500 files): about every minute.
It is becoming really acute since I updated to OS X 10.8.5 (12F37), and  even WORSE and UNWORKABLE: when the video now blinks the monitor enters power save mode, and I need to switch off and on the monitor to wake up video...
Thunderbolt Bus:
  Vendor Name:    Apple Inc.
  Device Name:    Mac mini
  UID:    0x0001000C170B0D00
  Firmware Version:    25.1
  Port:
  Status:    No device connected
  Link Status:    0x100
  Port Micro Firmware Version:    2.1.3
I connected the display via a mini-displayport to displayport cable (the DELL has a displayport port too), but I don't think that is relevant. I don't have that ridiculously overpriced dual-link DVI converter.
Filed a bug at Apple, submitted some system reports when the prob occurred. I hope they will release a firmware fix, or I'll take the mini back to the shop.

Hi Rick, I'd see if it's reated to this, which has many symptoms...
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

Similar Messages

  • Mac mini (Mid 2011) inexplicably running slow, especially videos, despite what I think is sufficient memory.

    I have a Mac mini (Mid 2011). It has become slow in some ways even though I have 8 GB 1333 MHz DDR3 memory and almost 250GB of free storage. I recently installed Yosemite 10.10.1 (14B25) but I had noticed the slow down prior to that. Notably, videos no longer run smoothly. Instead, there are brief pauses in playback. I initially thought it was a problem with streaming videos but then found the same problem playing TV shows and movies downloaded from the iTunes store.
    There are now also lags for starting up certain programs and many programs seems sluggish once open. Not sure what could have caused the slow down since I don't even use the computer at issue very much and haven't recently installed any new software. No programs launch with log-in and all notifications are turned off. Any ideas? If there's a problem specifically related to video, I'd be interested in hearing that too. I use a Samsung monitor but it and everything else about my computer used to work perfectly and videos ran smoothly until fairly recently.  

    EtreCheck version: 2.1.8 (121)
    Report generated March 25, 2015 at 8:14:49 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Mid 2011) (Technical Specifications)
        Mac mini - model: Macmini5,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6630M - VRAM: 256 MB
            SMFX2490HD spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 0:49:33
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (227.37 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flip4Mac WMV Plugin: Version: 2.4.0.11 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        WidevineMediaOptimizer: Version: 6.0.0.12757 - SDK 10.7 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User internet Plug-ins: ℹ️
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            18%    mds
             5%    WindowServer
             0%    Google Chrome
             0%    ocspd
             0%    AppleSpell
    Top Processes by Memory: ℹ️
        266 MB    mds_stores
        163 MB    Google Chrome
        110 MB    Google Chrome Helper
        94 MB    Finder
        60 MB    WindowServer
    Virtual Memory Information: ℹ️
        3.96 GB    Free RAM
        2.43 GB    Active RAM
        1.12 GB    Inactive RAM
        1.08 GB    Wired RAM
        2.51 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 25, 2015, 07:23:54 PM    Self test - passed

  • Mac mini mid 2011 missing apple logo slide up animation at logon in Mountain Lion!

    Here is a video I have found on Youtube to show the animation for those who didn't know, also showing a macbook pro which is missing this animation (Although in the video the OS is Lion but this is not the main point of this thread). the Apple logo gently slides up and the user image and password field appears:
    http://www.youtube.com/watch?v=ztpCNmDYDZ4
    I have installed Mountain lion on my Macbook Pro 13inch Early 2011 first and I loved this little animation which made the boot even more beautiful.
    However when I installed Mountain Lion on my Mac mini mid 2011, I had to see that the animation is missing.
    Luckily I have an iMac 21,5 incher Late 2009 as well, so I updated the OS and the animation was present on the iMac.
    So I'm wondering if this is a bug or is there any reason why this nice animation is not visible on my Mac mini?
    I did a Clean install as well to make sure it's not the upgrade's fault and I got the same result.
    Both my Mac mini and Macbook Pro has SSD. My iMac has a regular HDD.
    There was a thread opened about this issue where they said the animation issue would be solved in Mountain Lion:
    https://discussions.apple.com/message/18890484#18890484
    Well it was solved for my Macbook Pro and iMac seemingly but not for my Mac mini which is the latest from the family so it makes me sad that my newest computer is missing out on this little eyecandy. (Also I use the Mac mini most the time, so I miss this animation greatly)

    Same problem here. My MacBook Air (mid, 2012) doesn't have the issue and the animation is smooth. The problem is with my Mac mini (Early 2009). When it boots the apple logo shows up, then the spinning circle and then the screen goes black and the login screen appears afterwards with no animation.

  • Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade

    I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM.  I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly.  It's unusable to say the least.  Is there anything I can do to speed it up?  There must be a reason why the performance is so bad.
    Problem description:
    Slow after Yosemite upgrade.
    EtreCheck version: 2.1.8 (121)
    Report generated 1 March 2015 8:48:15 pm AEDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        Mac mini (Mid 2011) (Technical Specifications)
        Mac mini - model: Macmini5,2
        1 2.7 GHz Intel Core i7 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        AMD Radeon HD 6630M - VRAM: 256 MB
            Thunderbolt Display 2560 x 1440
            DX80 spdisplays_1080p
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 12:20:13
    Disk Information: ℹ️
        Hitachi HTS727575A9E362 disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 749.30 GB Online
    USB Information: ℹ️
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. iPad
        Apple Inc. Apple Thunderbolt Display
        Apple Inc. FaceTime HD Camera (Display)
        Apple Inc. Display Audio
    Firewire Information: ℹ️
        BUFFALO INC. HDD 800mbit - 800mbit max
            EFI (disk2s1) <not mounted> : 210 MB
            ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
            Apple Inc. Thunderbolt Display
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Extensions
        [loaded]    com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
        [loaded]    com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
            /System/Library/Extensions
        [loaded]    com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
        [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.sophos.uiserver.plist [Click for support]
        [running]    net.culater.SIMBL.Agent.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
        [loaded]    org.gpgtools.Libmacgpg.xpc.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.fix.plist [Click for support]
        [running]    org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
        [loaded]    org.gpgtools.macgpg2.updater.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.fitbit.galileod.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [running]    com.sophos.common.servicemanager.plist [Click for support]
        [loaded]    org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [running]    com.google.Chrome.framework.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Google Drive    Application  (/Applications/Google Drive.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        SpiderOak    Application  (/Applications/SpiderOak.app)
        AirServer    Application Hidden (/Applications/AirServer.app)
        Plex Media Server    Application  (/Applications/Plex Media Server.app)
        Box Sync    Application  (/Applications/Box Sync.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 7 Update 21 Check version
    User internet Plug-ins: ℹ️
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        1Password
        AdBlock
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        GPGPreferences  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
        Destinations:
            ext2tb [Local]
            Total size: 2.00 TB
            Total number of backups: 38
            Oldest backup: 2012-10-07 09:09:10 +0000
            Last backup: 2015-03-01 09:07:46 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 197.68 GB X 3)
    Top Processes by CPU: ℹ️
            40%    WindowServer
            12%    firefox
             2%    Activity Monitor
             1%    Box Sync Monitor
             1%    sysmond
    Top Processes by Memory: ℹ️
        533 MB    mds_stores
        498 MB    firefox
        429 MB    softwareupdated
        172 MB    InterCheck
        155 MB    SpiderOak
    Virtual Memory Information: ℹ️
        8.58 GB    Free RAM
        4.31 GB    Active RAM
        2.49 GB    Inactive RAM
        1.79 GB    Wired RAM
        10.08 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 1, 2015, 08:38:46 PM    /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
        Mar 1, 2015, 08:30:37 PM    /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
        Mar 1, 2015, 04:42:31 PM    /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
        Mar 1, 2015, 08:26:20 AM    Self test - passed

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Mac mini (mid 2011) to Samsung led tv via hdmi connection problem.

    Samsung led tv - UE32D5000
    Mac mini (mid 2011)
    On regular monitor (connected by hdmi to dvi cable) setup teamviewer
    Try to:
    1. Connect different hdmi cables - dose not work (on apple tv - both cables work)
    2. Connect hdmi cable to different hdmi ports.
    3. On tv change type of source - PC, PC-DVI and other.
    By teamviewer I watched what was going on the computer - Mac mini does not recognize tv like monitor by pressing 'seek monitor'.

    Aha! Similar problem here; Mini (Intel, Macmini2,1, the 2007 version with the larger HDI port not the smaller one)
    Problem seems to happen only with both HDMI and USB connected (USB only to use the built-in webcam on the monitor, an AOC V22+ (which I love, it's a very nice monitor; LED instead of fluorescent backlight).
    Sometimes it would suddenly switch to where the dock and menu bars and status bar were hidden (the desktop gets 'too big for the screen).
    Then I'd go to the Display settings and unselect "overscan"
    Then it'd be OK for a while, then switch to a big black space around the desktop window, lots of unused screen).
    Then I'd go to the Display settings and reselect "overscan" and it'd be Ok.
    For a while.
    There really ought not be a need to fiddle with 'overscan' at all -- since I'm not using this as a television. Mac OS 10.3.6 seems to mistakenly think the monitor is being used as a TV -- maybe when there's a video in a browser window?
    Not sure.
    Anyhow it becomes a rock-paper-scissors problem where I have to keep chasing the settings to undo whatever it changes to at random, Lather rinse repeat.
    Seems like it's only a problem for me when I have the USB cable also connected, to use the built-in webcam -- so I don't use that now.
    The AOC folks have been working hard on solving this.
    I just found this topic and have referred them here.
    They'll be glad to know it's not their problem, I guess.
    (does it happen on Apple brand displays too? I'm not sure)

  • Does a 500 GB SSD work in a Mac Mini (mid 2011)?

    I have a Mac Mini (mid 2011), 2.5 GHz and 4 GB of memory.
    The iOS app called MacTracker says that this model is "configurable to 256 GB solid-state drive or 256 GB solid-state drive and 750 GB (7200-rpm) hard drive".
    I was thinking about buying a Samsung Electronics 840 EVO-Series 500GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive. My doubt is: will it work in my Mac Mini or the maximum storage must be 256 GB? If it runs a 500 GB SSD, a Samsung EVO SSD would be a possible (or a perfect) choice?

    The info from MacTracker brings up the options available in a Configuration to Order
    at the time the product was new; so that tells people who may have found their unit
    bought with odd specs, such upgrade may be due to a CTO Apple factory upgrade.
    Other options that can work, of even higher spec capacity, can be researched in
    such mac-centric sites as macsales.com and others who have a reputation for
    customer service and quality products; many have information on their sites...
    Doesn't hurt to ask. OWC macsales may even have an online chat. Info on how
    to upgrade Apple products with later parts (out of warranty, etc) is available in
    their page as well as iFixit.com guides. Everymac.com also offers spec info.
    Good luck & happy computing!

  • How to make AirPlay mirroring working on Mac mini mid 2011?

    Cannot figure out how to use AirPlay mirroring knowing That ii have:
    1. Mac mini mid 2011
    2. Apple Tv 3 5.0
    3.osx 10.8
    Please help

    Hi Ikrupp,
    For some reasons it doesn't work for me, i'm having a green screen whatever i do...
    Any idea where the problem is coming from ?

  • 8 GB RAM for Mac Mini Mid-2011?

    I am looking for the correct version to install in my Mac Mini 2011. I found http://www.amazon.com/Crucial-PC3-10600-SODIMM-204-Pin-CT2C4G3S1339M/dp/B008LTBI T4/ is that the correct version that is compatable with my device?

    check out > Mac mini (Mid 2011): Memory specifications and upgrades - Apple Support
    FWIW I will only buy RAM straight from Crucial or OWC.
    try > http://www.crucial.com/usa/en/compatible-upgrade-for/Apple/mac-mini-%28mid-2011% 29
    or > http://eshop.macsales.com/shop/mac-mini/

  • Mac mini (mid 2011) no airplay icon

    Hey all, I just got a apple TV 3rd GEN, and can't seem to see this airplay icon on the top of my screen? I got a mid 2011 mac mini with a 2.7GHz i7 osx lion 10.7.5.
    everything works with connecting itunes to apple TV but I want to do airplay mirroring.
    is there something wrong with my hardware ?
    thanks for you time,
    sath

    What you need is OS X 10.8 (Mountain Lion) to be able to Airplay from your Mac mini mid 2011.
    Requirements for AirPlay Mirroring in OS X Mountain Lion
    An Apple TV
    Apple TV (2nd or 3rd generation) with software update v5.0 or later. See How to update Apple TV software.
    Supported MacsAirPlay Mirroring in OS X Mountain Lion takes advantage of the hardware video encoding capabilities of 2nd and 3rd Generation Intel Core processors. Hardware video encoding allows AirPlay Mirroring to efficiently deliver high frame rates while maintaining optimal system performance. The following Mac models have processors that support AirPlay Mirroring:
    iMac (Mid 2011 or newer)
    Mac mini (Mid 2011 or newer)
    MacBook Air (Mid 2011 or newer)
    MacBook Pro (Early 2011 or newer)

  • Mac Mini mid 2011 volume drops

    I have a Mac Mini (Mid 2011) and recently the volume output from the headphone jack to external speakers cuts out randomly.  I can get it back by raising or lowering the volume.  Any thoughts on a fix?

    Hi,
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Any change?
    To find out if it's system wide or user specific, try this...
    Open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new admin account, log out & into the new account.
    Does it work in the new account?

  • Windows 8 Release Preview on Mac Mini mid 2011

    I was wondering if its possible to install Windows 8 Release Preview on a Mac Mini mid 2011 via Bootcamp (Mainly for gaming purposes)

    I've finally got it installed on my HP Touchsmart 610-1000t (or whatever the number is).....
    Apparently it's a graphics card/driver issue. 
    I downloaded the enterprise final release and it did the same thing to me (black screen etc etc).
    In the end, I highly doubt some of these models are compatible with windows 8 if the final release is giving me the same problem.  The only difference is- now the sleep button worked, so I fiddled around with it until I got it fully installed (user created).  After doing so, I booted into Safe mode and disabled the graphics driver/restarted and it booted up fine/works fine.  Every now and then it crashes on IE10.  I wasn't able to test the touch capabilities during the releases between developer and final, so it wasn't until now I can finally test the functionarlity of ALL the gesture functionality.  I can say, the combination of the touch screen desktop and short cut keys makes everything so much quicker and easier.  I perfer windows 8 over windows 7 on my touchscreen, finally the touchscreen experience is much better! Of course I still use my keyboard and mouse.  The touch pinning/swiping is awesome.  I can't say the same for normal desktops in a corporate environment (without touchscreens).....I can say however- windows 8 tablets would be really nice in place of my Ipad or my laptop that I carry around from meeting to meeting, thus the reason I'm waiting for the Surface!  CItrix and apps can only take you so far.

  • I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

    i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

    Welcome to Apple Support Communities
    The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
    If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

  • Mac Mini mid 2011 Mini Dvi to VGA problems

    I have a mac mini mid 2011 and I have to connected to a display in work.  The display only has a VGA entrance, so i bought a mini dvi to vga adapter from my local mac store, but when i connected to the display everything looks odd, the whole display has an odd purple look, I have tried to use a different VGA cable but keep having the same problem, I even tried a different display with the same results, anybody knows why this happens and how to fix it?

    Your welcome!
    On your end before returning the Adapter,
    try > Resetting the System Management Controller
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    and > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    then if that doesn't help, return the adapter and explain the problem to the Apple tech person at the store.

  • Mac Mini (Mid 2011) display artifacts HDMI to DVI at native res

    Hello,
    I recently changed monitor configurations and in the process moved my Mac Mini (Mid 2011) to a HP LP2065 monitor.  The connection is made through the stock supplised HDMI to DVI adapter.   The monitor and the DVI cable work successfully with other machines.
    What occurs is only certain colors, usually black,  result in the display being red and/or sparkling and/or static (like TV static) when the monitor is set at its native resolution of 1600x1200.
    If I bump the resolution down to 1280x1024, or lower,  the black color returns and I see no display glitches.   If I bring the resolution back up to 1600x1200,  the display artifacts return.
    A few google searches suggest I use a DisplayPort to DVI adapter instead as some monitors are "finicky".   Does anyone agree with that?  It seems peculiar to me -- why would a digital signal have analog-looking glitches? 
    Any ideas welcome.. thanks for reading

    Your monitor has a native pixel resolution of 1920x1200.  There is no point in trying for 1080-p or -i.
    I run two 1920x1200 monitors via HDMI (with passive cable adapters where necessary) and I use these choices:
    ...and they are both pixel-sharp, filling the screen, and yet menu bars totally visible!

  • Highest dual display resolution for mac mini mid 2011

    I am currently running a mac mini mid 2011. As I've understood (according to the below statement). Am I only able to use 2 secreen with 1920x1200 or could I use one screen with 2560x1600 and one with 1920x1200. I do NOT want mirroring, only dual displays.
    I am going to connect the screens in the following way:
    1x mini-dvi - HDMI to one screen.
    1x HDMI - HDMI to the other screen.
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapterand 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    Thanks in advance
    Rich

    According to the copy&paste from wikipedia, HDMI should support higher resolution than 1920x1200. So the question is, does it aupport that on the mid 2011 mac mini. It says in the specifications
    "Mac mini is designed to work with HDMI devices that comply with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification."
    That should mean it should be able to support it, but I don't know : <
    HDMI version
    1.0
    1.1
    1.2
    1.3
    1.4
    2.0
    Date initially released
    December 9, 2002
    May 20, 2004
    August 8, 2005
    June 22, 2006
    May 28, 2009
    September 12, 2013
    Maximum clock rate (MHz)
    165
    165
    165
    340
    340[109]
    600
    Maximum TMDS throughput per channel (Gbit/s) including 8b/10b overhead
    1.65
    1.65
    1.65
    3.40
    3.40
    6
    Maximum total TMDS throughput (Gbit/s) including 8b/10b overhead
    4.95
    4.95
    4.95
    10.2
    10.2
    18
    Maximum throughput (Gbit/s) with 8b/10b overhead removed
    3.96
    3.96
    3.96
    8.16
    8.16
    14.4
    Maximum audio throughput (Mbit/s)
    36.86
    36.86
    36.86
    36.86
    36.86
    Maximum color depth (bit/px)
    24
    24
    24
    48[a]
    48
    Maximum resolution over single link at 24-bit/px[b]
    1920×1200p60
    1920×1200p60
    1920×1200p60
    2560×1600p75
    4096×2160p24
    4096×2160p60
    Maximum resolution over single link at 30-bit/px[c]
    N/A
    N/A
    N/A
    2560×1600p60
    4096×2160p24
    Maximum resolution over single link at 36-bit/px[d]
    N/A
    N/A
    N/A
    1920×1200p75
    4096×2160p24
    Maximum resolution over single link at 48-bit/px[e]
    N/A
    N/A
    N/A
    1920×1200p60
    1920×1200p60
    Maximum 3D resolution (using a full resolution 3D format) over single link at 24-bit/px
    N/A
    N/A
    N/A
    N/A
    1920×1200p60

Maybe you are looking for

  • When opening a new tab, babylon search opens by default (which I Hate), How can I change it?

    Babylon search and tool bar, got installed in my computer when I installed some other program (Ares). And now there is no way I can get rid of it (of Babylon). Please help. It is annoying.

  • JApplet in browser doesn't refresh

    Hi - I'm putting together an applet which currently contains only a few JButtons in a container. When the browser is minumized and then maximized, the buttons do not redisplay. Functionally, they're still there (they respond if I click in the right p

  • Tecra M5 - Toshiba Power Saver not doing its job properly

    Hi, After looking for some time for a tool to silence my Tecra M5 I found a seemingly nice app called Toshiba Power Saver. Unfortunately this tool doesn't seem to be working properly. I played with the [Cooling Method slider|http://img200.imageshack.

  • Speech application (system pref)

    why is speech application (system pref)  no longer working with Lion? Or at least when I down loaded Lion it stoped working

  • Oracle Net configuration failed

    I tried to install oracle11gR2 on windows7 32 bit laptop. It failed because it gives this error. "oracle Net Configuration is failed". I can't understand what to do. I searched the web but couldn't do it..