Mac Mini mini-display to DVI issues

I have a late 2012 Mac Mini running OSX Mavericks, and I am currently using an LG Monitor over HDMI. I want to run a second Monoprice tablet monitor from the mini-display using a DVI cable and an Apple mini-display to DVI adapter. Every time I plug it in, both screens go dark and the computer crashes and restarts. The Monoprice monitor works fine when I unplug the LG from the HDMI port and plug in my Monoprice using a DVI to HDMI cable. Also, at one point, I plugged my Monoprice in to the mini-display port using a mini-display to VGA adapter and VGA cable, and it only gave me a 1200 X 800 resolution (The Monoprice is 1440 X 900---I could never get it to display this resolution using the mini-display port).
Does anyone have any idea what is going on?

I used an HDMI to DVI cable to connect an Apple TV to an Acer monitor, so I would expect the same to work for the mini. You'll have to run the audio separately, however, as you won't get audio through DVI.

Similar Messages

HDTV acting up with late '09 Mac Mini - display prefs at issue

I used my 46" Sharp Aquos successfully with my 2006 Mac Mini before I gave it to my brother last December and got a new Mac Mini. They were connected with an HDMI-DVI cable from one of the TV's HDMI ports via an HDMI-DVI cable to the mini-DVI port through the adapter.
Three times this morning within 20 minutes of turning on the TV the TV has turned itself off (the audible click that occurs when the TV is turned on or off and the two green lights go off). The TV turns itself off in a few seconds.
I contacted a Sharp Aquos person online who gave me a case # and told me to call Sharp on the phone so they could walk me through a factory reset.
When I got Sharp on the phone they asked me what preferences from the manual's chart I had chosen. I told them that it was my understanding that Macs do this automatically. I checked my display prefs and they're "1080p" (the manual's chart has only vertical and horizontal resolutions) and the profile is set to "SHARP HDMI". Are these prefs OK and thus the Mac Mini not at fault in all this?

Correction: I meant to write :The TV turns itself BACK ON in a few seconds

2010 Mac Mini display and network issues after Mountain Lion installation

I just installed Mountain Lion on my 2010 Mac Mini, but now the display won't work and it isn't showing up on my network. I have it hooked up to my TV (I don't have another screen for it) via HDMI. Also, I've mainly used this computer by using the share screen function with my laptop, so I don't have a keyboard or mouse for it either. The Mini is no longer showing up on my laptop's network list... Any suggestions?

I would see if you borrow a USB keyboard and mouse
from some one, because otherwise trouble shooting the
problem will be next to impossible as sometimes the fixes
and diagnostics require the keyboard (PRAM reset, Hardware
Test, etc.).

Mini display to DVI adaptor not working?

Just bought my first Mac, Its a Mac Mini 2.3 i7. Tried to hook my monitor up with an Apple mini display to dvi and when I powered on my Mini got a white screen with apple logo then monitor went black and started searching for a signal. When I switched it over to the HDMI to DVI it works fine. I plan on running dual monitors as soon as my second one comes in,they only had 1 in stock had to order the 2nd one. started with the mini display to DVI first because of the problems I have read about the hdmi port. Monitor is a Dell E2311H 1920x1080 at 60Hz. Any help would be great! Thanks

The issues you read about regarding the Mini's HDMI port are from people using that port to an HDMI monitor/TV. So, HDMI->HDMI. As you mentioned, you're working fine with the supplied HDMI->DVI adapter. I'm surprised that the MiniPortDisplay->DVI isn't working I have one that plugs into the Thunderbold port and it works fine.

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

Mini Display port DVI adapter not working on Thunderbolt Port

For some time I've been using a mini display port to DVI adapter on an slightly older MBP to connect to my HD TV. I recently purchased a MBP with a Thunderbolt port and when I try to connect it to my TV via my mini-display-port-DVI adapter things are not working properly. The MBP is seeing the Philips TV but it isn't listing all the display modes and I'm not able to send any video to it. Does the Thunderbolt port require a new display port to DVI adapter?

Let me be clearer; I've got the MDP-DVI adapter connected to a cable that is DVI on one end and HDMI on the other. I've got both laptops so I can compare side by side. I plug in the MDP-DVI adapter to the old laptop and all works well; I plug it into the new laptop and while the laptop does see the TV, the display modes for it are all 1080p which is wrong I don't see any desktop image on the TV unlike when I plug it into the older laptop. This is very disappointing as I expect things to just work with Apple products.

Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female?

Does anyone know if the HDMI to DVI Adapter that comes in the Mac Mini box is DVI end male or female? Should I be getting a male to male DVI cable, or will this one work out of the box? Thanks!!

Looking at mine - the DVI end is female.

Best Mini Display to DVI adapter for 2011 17" MBP w/no blocked ports!

I am looking to get a Mini Display to DVI adapter for my 2011 17" MBP.
+(Preferably it would even be one with a 6' cord.)+
It is not clear which one I should buy. Apple's (adapter only, no cord), is $30, while I can see others for far less on Amazon.
I have read that some of these adapters actually block the FW800 and USB ports on either side.
A blocked, or displaced FW800 port is a deal breaker.
1. Can someone with a 2011 17" MBP tell me that they have either one of these adapters, or the one with the cord, and that it doesn't block their FW800 port? (I'll pay the $30 (albeit grudgingly) if its the only one that works.)
2. This may be a dumb question, but the specs on these adapters say that they are capable of 1080p resolution. Would that mean they would work with a 1920x1200 monitor?

You might want to try the "MBP Display" discussion threads, might be able to find what you are looking for in there or get better support there.
I don't think I can help very much, but I have the Apple's adapter (no cord) and it doesn't block my usage of FW.

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Look up "screen sharing" in help
You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse. Choose your mac mini's name, and look for the "Screen Sharing" button.
Choose Apple menu > System Preferences, and then click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users:
Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users:
Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen:
Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password:
Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
also
Finder icon on dock, macintosh hd,
Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
delete file & restart sleep to test.

My mac mini displays a green screen with 'mac os version not yet responded' and 'you need to restart your computer' as a warning message. Inspite of all my tries it doesnt run from the install dvd either.

My mac mini displays a green screen with 'mac os version not yet responded' and 'you need to restart your computer' as a warning message. Inspite of all my tries it doesnt run from the install dvd either.
Please help.

Sounds like you may have a hardware problem since it won't read from DVD, and it is only a year and a half old. Hopefully all it is, is bad RAM*:
http://www.macmaps.com/badram.html

Mac mini display is flicking via HDMI to DVI adapter and DVI cable

i have received mac mini server (mid 2011) recently. mac mini is connecting the display via HDMI port using DVI cable with a HDMI to DVI adapter.
the display shows constant flicking. white dots/lines show randomly. it is like those signal noise when watching analog TV.
the same display works fine and well with macbook pro (early 2008) via DVI port.
please help. please advise.

So you know the display is working.
It seems to me you have a few possible problems.
1 HDMI-DVI cable is bad
2 DVI-cable is bad
3 Connections between cables or computer or monitor are bad.
4 HDMI port on the computer is bad.
I assume you've tried #3, and re-connected cables and wiggled inputs. So then try replacing 1 and then replacing 2 which are cheaper fixes than replacing/fixing 4.........
FYI, I'm connect my mac mini using the same setup you describe, with no issues....also inspect the cable ends carefully to look for any problems.
jb

New Mac Mini thunderbolt to DVI adapter issues

Hi there,
I'm working on a new studio installation. We have a new Mac Mini that we're trying to connect up to a 30-inch Cinema HD display with DVI input. We have a Kanex C30 Mini DisplayPort to Dual-Link DVI adapter that plugs into the Thunderbolt port and one of the USB ports (for power) on the back of the Mini, but despite our best efforts we aren't getting anything on the display. Going Mac - adapter - display results in about 7/8ths of the screen going white and displaying two green and misshapen Apple logos for about 5 seconds before it goes blank.
Ultimately we want to run it over quite a long DVI cable and currently have an Extron signal booster in place, which works perfectly from the Mac Mini's HDMI output through an HDMI to DVI adapter. However we're already using the HDMI output to feed another monitor.
So two questions really:
1. Can the Mac Mini feed two separate displays of different sizes? The 30-inch over Thunderbolt to DVI and another Apple 24 inch display over HDMI to DVI.
2. Does anybody have any experience with the Kanex or can you recommend an adapter that will work for us?
Any suggestions would be greatly appreciated. This whole process has been a very long headache!
Many thanks,
Josh

Hi Josh,
It should work, but not Mirrored of course, just Extended Display...
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

Mac Mini mini-display to DVI issues

Similar Messages

Maybe you are looking for