Mac Mini not visible in Mac network (shared drives, remote desktop)

Hi,
I got the following problem since a few months and can't figure what the problem could be.
My Mac Mini in not visible on my other macs in Finder oder Path Finder.
With unsing Apple + K shortcut I can connect to alle Mac Mini drives.
- Both machines have 10.8.4. installed
- Router is a Time Capsule
-> MBP connected via WiFi
-> Mac Mini via LAN cable
- IP Adress will be set via DHCP (static IPs won't help, tried that of course)
- Remote Desktop und Sharing is activated on both machines within preferences
- MacMini sees my MBP und my GFs MB
- MBP is able to see my GFs MB, but not my MacMini
- No Firewall acticated on both machines
- rights have been checked and repaired with the harddrive tool
Anybody an idea what I can try next?
Thanks!

Error resolved. It's was obviously my fault...
I changed the plist to deactivate multicasts a long long time ago
http://blog.tsunanet.net/2010/02/how-to-disable-bonjour-on-osx-106-snow.html
After deleting the entire line my mac mini is visible again.

Similar Messages

Mac Mini not reading old pc ext hard drive

Have a five year old external hard drive from a previous PC. I connect it to my Mac Mini and the device listing shows it is there, but the letters are not black. They are light grey and i am unable to open the drive when i click on the listing.

Sounds like it is not mounted properly, damaged or perhaps is protected by some sort of windows encryption.
Open Disk Utility and see if you select the drive in the list of drives and then mount it using the blue Mount button. If not then disconnect the drive, restart the Mac Mini and reconnect the External Drive.
Now if it is still not mounting and/or you are unable to manually mount it using Disk Utility, it is either damaged and needs repairs or unencrypting using a windows computer. Of course I could be totally wrong about the windows encryption thing, because I don't use them all that much.

External hard drive not visible on Mac Mini

I just purchased a Mini with Lion. The Seagate Freeagent external hard drive is visible from finder on the Mini but it is "read only" and it is not visible on the wireless network to my macbook. How can I make the external hard drive read write and make it visible on the network?

OS X can read an NTFS formatted drive, but not write to it.
Sharing drives | Utilities - Page 1 | Macworld
If you want to use the drive for sharing files between Window's and Mac's, then MS-DOS / FAT-32 works fine, except that it has a 4GB single file size limit.
If you are going to use the drive exclusively with your Intel Mac's for sharing, backup and booting, then use GUID Partition Table / Mac OS Extended (Journaled) for the Partition Scheme and Format.
Format a Drive to Boot Intel Macs | Tips | The Mac Observer

Mac OS 9 AFP file sharing volume not visible under Mac OS 10.5

An old blue-white PowerMac G3 running Mac OS 9.2.2 with file sharing on is not visible on the network for a MacBook Pro running Mac OS X 10.5.5. – However, a PowerBook G4 with Mac OS X 10.4.11 perfectly shows the G3.
Connecting to the G3 works on the new MacBook Pro with OS X 10.5 if I use the server's IP-address (afp://xxx.xxx.xxx.xxx) but does not work if I use the server's name (afp://<servername>).
All other shares on the network are visible for both the MacBook Pro running OS X 10.5 and the PowerBook G4 running OS X 10.4.
Why does the MacBook Pro with Mac OS X 10.5.5 not show the G3?
Why can't I connect to the G3 using its AFP name?

I think this is because there is no AppleTalk on Leopard.
Ah, I stand corrected........
Go to SystemPreferences > Network
Select your connection in the left column. Advanced > AppleTalk
Enable AppleTalk for your connection.
sp
Message was edited by: brainslice

HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

Mac mini won't wake from network

Hi, I am confused and need some help.
SInce upgrading to 10.7.2 my mac mini no longer wakes for network access i.e. from ATV2. Worked perfectly before and now it does not.
Also, the screen shows (about once a week) snow on the screen from a wake from sleep. only a reboot solves this.
Any thoughts?

My Mac Mini server (2011) with 10.7.2 has the same problem since 10.7.2 update.

Copying files from Mac to PC network shared drives.

Copying files from Mac to PC network shared drives.
We have shared mounted drives in AIX Fusion that we can pull files from and copy to the mac, however we can not copy files from the mac to the drives.
“Error in user parameter list (-50)” With MS DOS-Formatted Volume.”
The drives are mapped on the mac using SMB. We can go to the files on the mac and use “save as” and this works and saves them on the shared drives.
We can not drag and copy them to the shared drives. Every time it fails and we get the above error. We can create folders but not move any files.
When we look up the error, it is referring to certain characters that can but used in a Max OS X filename and are not allowed in MS-DOS filenames. We are not using any of the characters not allowed.
The drives have all the basic set up in AIX, RWC. All the PC's we have can drag files to and from all our shared drives.

Either install software which enables the Mac to write to NTFS drives, or MacDrive on the PC, or reformat any drives you'll be using to share files between the computers as either FAT32 or exFAT.
(88270)

Why does my mac mini not read or write DVD's?

Why does my mac mini not read or write DVD's? I have tried different5 brands of media, checked firmware and followed every 'fix it' available. HELP.
It is a late 2009

See my FAQ*:
http://www.macmaps.com/cdrfailure.html

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

Internal HD on mac mini not well... need to boot in Single User Mode

Internal HD on mac mini not well... need to boot in Single User Mode.
I only have a Bluetooth Keyboard and Bluetooth Mouse so when I try to boot in Single User Mode (to do the /sbin/fsck hard drive fix thing) it doesn't see the Bluetooth Keyboard. What's the solution?
I also used SuperDuper to use as a boot drive but it won't unmount my internal HD. arghh..
Help

I have a corrupt drive and was unable to repair all the errors after booting from OS X installer disk and choosing Disk Utility...
I followed the "boot into single user mode" instructions hoping to complete my repair with fsck, however once I got to the localhost:/ root# prompt, my keyboard seemed to be unrecognized!
I tried 3 different USB keyboards - original Apple USB keyboard, Kensington Mac USB keyboard and an old SGI USB windows keyboard. All were able to enter the apple-S key to get into single user mode but NONE of them were able to type any commands whatsoever.....
I'm thinking my only option is to boot the mini as a target drive off my laptop and try to backup my 30GB of music and photos before wiping the drive...
2nd option might be to try Disk Warrior for $79??
Anyone else have ideas for me?

What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi.

What is the best way to use wi-fi to transfer pdf files from an ipad to a mac mini, not using an internet, just wi-fi?

If the Mac use Lion (10.7) you can use Airdrop for that.
With Mac's not using Lion you may set up a computer to computer (ad hoc) connection.
How to --> http://docs.info.apple.com/article.html?path=Mac/10.6/en/8339.html
Lupunus

Why does my mac mini not recognize camera when plugged in?

why does my mac mini not recognize my capera when it is plugged in?

What model of Mac Mini and what camera do you have?
Are you connecting it via USB or other ways?

Iphoto library not visible for itunes home sharing

Hello, I have an issue where my iPhoto library is not visible in iTunes Photo Sharing Preferences. I wish to have my iPhoto library (Aperture Library) available on my Apple TV. I have switched on Home Sharing. When I go to iTunes/File/Home Sharing/ then wish to select which photos to share, iPhoto is not listed in the preference pane. The only available option is my Pictures folder.
My library is on an external hard drive. When I try to point to it manually, the library is greyed out.
Any ideas? I have been using Home Sharing for a long time and have not had this before. I have latest version of iTunes and iPhoto. My library is an Aperture library. The external hard drive is Mac OS Extended format. There should be no issues there. I have done a check disk and a repair permissions also.
Thxs

Hello, I have an issue where my iPhoto library is not visible in iTunes Photo Sharing Preferences. I wish to have my iPhoto library (Aperture Library) available on my Apple TV.
Does your joint Aperture/iPhoto library show in the Finder as "Kind Aperture Library"?
Then set your Photo Sharing to share from Aperture and not from iPhoto.
When I try to sync or share iPhoto libraries from iTunes, it will look for libraries "Kind iPhoto" and not sync with an Aperture library, even if it is the current iPhoto library.

Mac mini server: Hardware test error on Hard Drive

Mac mini server: Hardware test error on Hard Drive
'checking for slow read failures': ERROR - Target device access failure - Test failed.
CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
This is our trauma history:
- time machine got increasingly slower in writing a backup
- we quit the backup
- we switched off the mac mini (on power button)
- we switched on the mac mini
- we stopped time machine to the rules
- we shut down mac mini via command
- we booted the mac mini in save mode
- we see a loading bar
- no progress after 10th of loading bar
- switched off (power button)
- when we now switch on the loading bar below the apple-logo is all we see + the little wheel
- we started with cmd+alt+p+r pressed
- mac mini restarted but showed the loading bar scenario without progress again
- we started with 'd' pressed and did the hardware test (see above)
- we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
ANY IDEAS?
IS IT A SOFTWARE- OR HARDWARE ERROR?
THX IN ADVANCE!

BDAqua wrote:
I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
I'd get Temprature Monitor & see what temps they're running.
Is Temperature Monitor an app or a device? If it's a temperature problem then that is essentially a design problem. Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers. I think it would be foolish to waste any more money on these minis for my business hosting.

Installation of leopard from one mac mini to another with dead CD/DVD drive

Is it possible to install Leopard on to an older mac mini that has a nonfunctioning CD-RW/DVD-ROM drive but otherwise works fine for what it is
Hardware Overview: Machine Model: Mac mini
CPU Type: PowerPC G4 (1.1) CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB Memory: 256 MB
Bus Speed: 167 MHz Boot ROM Version: 4.8.9f1
Serial Number:
TOSHIBA MK4025GAS:
Capacity: 37.26 GB
Model: TOSHIBA MK4025GAS
Revision: KA100P
Serial Number:
Removable Media: No
Detachable Drive: No
BSD Name: disk0
HARD DISK:
Capacity: 37.13 GB
Available: 9.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /
MATSHITA CD-RW CW-8123:
Manufacturer: MATSHITA
Model: MATSHITA CD-RW CW-8123
Revision: CAD4
Serial Number:
Drive Type: CD-RW/DVD-ROM
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
FROM a mac mini that HAS a functioning CD/DVD drive
Model Name: Mac mini
Model Identifier: PowerMac10,1
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 512 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.9f4
Serial Number:
MATSHITA CD-RW CW-8124:
Firmware Revision: DACD
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: Insert media and refresh to show available burn speeds
I thought maybe I could do it with firewire but no luck...
any help would be greatly appreciated
Message was edited by: Moderator

k...
Boot the mini into TD mode
Connect it to the "other" Mac
Insert the install disk in the "other" Mac
Start the installer which will reboot the "other" Mac
Once the "other" Mac has restarted and is running from the install disk, you should be able to select the Mini's drive (the FW disk) as the install destination. If not, go into the Disk Utility (under the "Utilities" menu) and check out the FW disk. You may need to "repair" it, repair permissions or reformat it depending on the condition of the disk and the type of partition it contains.

Mac Mini not visible in Mac network (shared drives, remote desktop)

Similar Messages

Maybe you are looking for