Mac Mini OS X version 10.8.2 I can't empty trash

I can't empty my trash there's a message and click "all remove all items" then nothing!!! How could I do?

It looks like you have locked files on the Trash. Follow the steps of this site > http://www.thexlab.com/faqs/trash.html#Anchor-Locked-48213

Similar Messages

  • I have a Mac Mini late 2012 version and i am trying to reset to factory setting.

    Hello, I had a bought a Mac Mini late 2012 version a couple months ago, and after i tried to install "pro tool" on my Mac, and FAILED. my Garage band wouldn't open anymore. it only tells me "garage band quit unexpectedly" when i open it. I tried uninstalled it and reinstall it again, but it still won't work.
    So now, I want to jus5 restore the whole Mac mini to factory setting and erase everything in it.
    I had read some of the threads in the community, and the Mac mini late 2012 doesn't come with an OS disk.
    Therefore, is there anyone can tell me how i would be able to rest the Mac Mini later 2012 version back to factory setting and erase everything in it?
    Thank you very much!
    PS: i am not using Apple keyboard.

    See:
    http://support.apple.com/kb/HT4718

  • HT1338 I have a Mac Mini running OSX version 10.8.5 and I want to connect an HP OfficeJet K60 printer using a USB connection.  How do I do this please?  I am not very computer literate so simple instructions would be helpful!

    I have a Mac Mini running OSX version 10.8.5 and I want to connect an HP OfficeJet K60 printer using a USB connection.  How do I do this please?  I am not very computer literate so simple instructions would be helpful!

    Hi Johnfromglenver,
    There are no Mac drivers for the HP Officejet K60 printer. Therefore it is not compatible with the Mac operating systems. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl. There may be other solutions that could work for you.
    I hope this information helps.
    Advance 23
    I work on behalf of HP

  • HT1846 The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

    The 2012 Mac Mini's are listed on this article. Can I run windows 7 64-bit on it and/or the 32-bit?

    I would buy nothing less than Windows 7 64-bit Pro.
    32-bit only addresses 3.5 GB RAM ... 2012 Macminis can hold 16 GB.
    64-bit Home addresses 16 GB RAM.
    64-bit Pro addresses 192 GB RAM and han an XP mode.
    This is all about having a good version of Windows for future use.  Yu can buy "Syem Builder" version of 64-bit Pro for $140.

  • My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?

    My Mac Mini is running on iOS 10.6.8 can it be loaded with 7.0 or higher?

    Choose About this Mac from the Apple menu, check if the computer has at least 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
    Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
    (113087)

  • I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

    I have a late 2012 iMac and a late 2009 mac mini.  I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
    According to Cruicial my mac mini could use:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-8500
    Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
    Also According to Cruical my iMac uses:
    Module Size: 8GB Kit (4GBx2)
    Package: 204-pin SODIMM
    Feature: DDR3 PC3-12800
    Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
    I want to increase the ram in both computers. 
    So,  can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac?  Naturally the ulitmate test will be when I actually install it,  but having an expectation of success or failure will allow me to plan on what to spend money on.
    Thanks,
    Bear

    Thanks for the responses.  I probably wont even try as my priority is Ram for the mac mini.  2 is not enough.  8 for my imac is okay for now. 
    Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed.  It seems that I am incorrect.
    Thanks,
    Bear

  • Mac mini intel 2 versions 128mb and 256mb graphics in windows ????

    Okay I have 2 mac mini intels core solo's and with the same ram 1gb installed and the same windows xp sp1 version etc etc. the one has 256mb video ram and the other has 128mb video ram ????
    The 128mb one has a stamp hp42 and a sticker on the motherboard stating locked something ??? tiger = 10.4.5 install dvd
    The one with 256mb has hp22 stamp and no sticker but also came with the orriginal tiger for intel 10.4.3 ?? so likely is a older model ????
    Does anyone have a clue about this ????

    and the same windows xp sp1 version.
    I didn't think you could load SP1 onto a intel Mac, how did you get it work? Are you using boot Camp?
    No idea about the stickers as I didn't disassemble my mini. Can I ask you you decided to take the computers apart?

  • Mac Mini OSX Server Version and installation

    I am very interested in the New Mac Mini with OSX server configuration.
    But I would like to know what is the difference between the "Retail" OSX server version and the "Bundled" OSX server version which came with the Mac Mini ?
    Can the "Bundled" server version be installed on another intel-based Mac ( in case of hardware failure in the Mac Mini ) ?

    The difference is that this is server software, it is not the Mac OS X client software for day-to-day use on a Pro or Consumer Mac.
    The bundled software according to the Mac mini Server specs page is on an Install/Restore DVD. These are usually machine specific so it will not be usable by directly placing it in the ODD of another Mac, it should spit the disc out as unusable. But there are ways to connect the Macs and install the software to another Mac. However, the End User Agreement licenses the software for installation on only one Mac at a time.
    Dah•veed

  • Can I convert a French Mac mini to English version?

    If I buy a Mac mini with the OS in French, can I convert it to English. I am thinking that I could clone the hard drive from my meprobamate and run it that way. Would this work?

    That should read the hard drive from my MacBook Pro

  • MAC MINI (Intel 2GHz version) - NOT STARTING!!!

    I have a MacMini Intel 2.0Ghz which I barely used. . . I thought the other day to fix it on another TV perhaps it would be used more in the living room area. . . But it would not start up. . . I am not sure what happened. Tried another adaptor and still same. . . Tried RESTING SMC but still same. . . So some told me is the LOGIC BOARD!!!! Shoooooooooot!!!! can it be the LOGIC BOARD burns so quick!?!?! Kindly if you had similar experience or know what could be going on, please let me know. Thanks.

    My second Intel Mac Mini will not start after a normal shutdown. No response or sound. My first dead mini was 3 months past warranty and they said it is the logic board. When a logic board is half the cost of a new one it is hard to justify. I now may have to get a new logic board to be able to retrieve the data on the two mini hard drives. I would welcome any suggestions. Should a buy a new mini and use it to retrieve the data on the two dead mini hard drives or just get a new logic board? Yes, I tried re-setting the SMC. Is it possible the internal battery is causing the problem?

  • Mac Mini (Mid-2007 version)

    Can a Mini (Mid-2007 version with OS X 10.5.8) be upgraded beyond OS X10.6?  If not, is it too old to have a meaningful life?
    Thanks

    That's correct. You need to buy and install another 1GB RAM, and should buy another 3GB before upgrading it; its RAM limit is 4GB.
    (107129)

  • Logic Nope With G4 Mac Mini (Non-gigabet version)

    Does anyone know if that will work? One of the genius' at the apple store said I need gigabit and the only thing I could do was to buy a new Intel Core Duo Mac Mini. (Oh BTW, does anyone have predictions on when the Mac Mini will go core 2 duo) Does anyone know of any non-gigabit to gigabit converters out there? Thanks!
    Mac Mini   Mac OS X (10.4.8)  

    you can in theory run logic node with less than gigabit ethernet, but the word is that it's too slow to make it worthwhile.
    also, there's no such thing as a non-gigabit to gigabit ethernet converter. a datsun to porsche converter would be nice too.
    you can probably get a gigabit ethernet PCI card to add to a machine, but mac minis don't have PCI. honestly you're best off just getting a machine that has gigabit ethernet built in.

  • AV Coupler/Joiner for Mac Mini 2009 (MiniDVI version)?

    I'm sure it's wishful thinking but being that everyone's seemingly biggest gripe with Mac Mini '09 is that it's missing HDMI and subsequently utilizes the optical audio and MiniDVI outputs. This makes things very difficult when trying to set up a media center from it.
    This leads me to this thought. Is there a sort of coupler/joiner for the audio and video? For instance, an adapter that receives Mini (or fullsize) DVI as well as Toslink digital optical audio and outputs HDMI? Again I'm sure it's wishful thinking but I figured I'd ask. 

    You nearly sold me on that second option with taking the DVI and Optical and outputting to HDMI. I was so excited! ...until I saw these reviews under that product which made me very sad. Essentially it doesn't seem to be mac friendly? The whole issue comes down to the fact that my soundbar only receives 1 optical toslink cable and I have 2 devices that ultimately need it (due to the mac mini not having HDMI). Everything is running in to my HDTV via HDMI and out to the soundbar via Toslink. Now that the mini is in the picture, I tried finding an optical auto switch which essentially doesn't exist apparently. They have manual ones but I'm a lazy american that enjoys doing everything from my logitech harmony remote. I tried a cheap 2-to-1 optical combiner but that isn't outputting correctly either. --CUE THIS POST-- That's when I figured if I could get the mac mini to output to HDMI and go in to the TV, life would be merry. I almost want to try it and see if those two reviews were from a couple of whiners, however it seems to good to be true and with them complaining about it, it doesn't reinforce my confidence haha. Either way, your answer was an excellent one! I hope I get more feedback from you/others! :-D 
    Review #1
    "I should of listened to the first reviewer with a MacBook Pro. It also doesn't work at all on my intel Mac Mini connected to my HD TV. In the directions I read that it will not work on non compliant HDCP products. Well, ALL Macs are non compliant HDCP. So if you own any Apple Computer DON"T PURCHASE THIS DEVICE!!! Now I have to go through the process of paying to send this back and waiting for the refund. Plus I purchased a DVI to DVI cable that I also have to send back. To make your Mac ALL DIGITAL you need a Toslink mini cable with a standard Toslink on the other end and connect this to your ear phone jack and the other cable end to a toslink home theater connection- the ear phone jack can be standard analog or digital depending on what cables you purchase. Connect another cable with DVI on one end and HDMI on the other end. The DVI end connects to your MAC and the HDMI connects to your TV- this will be strictly for the video part of the digital connection. A DVI cable can only carry video. NOW click on that HDMI port on your HD TV (for your video) and click the port on your home theater where the Toslink optical connection is. Now both the video and audio are all digital. It takes me less than 10 seconds to do this and my h.264 movies look and sound FANTASTIC! Good luck..."
    Review #2
    "This is a piece of junk. The best resolution I can get from this on my 1080p 50" TV is 640x480. Absolute trash. My MacBook Pro can't detect the TV correctly. The plug and play information is not passed through correctly. And I get no sound."

  • Cannot get airplay icon on mac mini 2012 (newer version-mountain lion) or on ipad2 (ios6.1) any ideas? Apple tv says to turn on home sharing, but mac mini says home sharing is on

    Does anyone know if this is router issue that does not allow the conection between devices??
    The ipad, mac mini and apple tv can access by themselfs the internet wirelessly!,

    ikaro
    Start by rebooting everything, including router.  Take all cables out ATV for 30 seconds to.
    Just a first look.
    Jules

  • HT1444 As an obvious novice I want to know how to upgrade my mac mini OSx 10.4 to a newer system can anyone help?

    As obvious novice I want to know how to upgrade my mac mini 10.4 OS X to a more uptodate system

    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto but not including the Serial#...
    Hardware Overview:
      Machine Name:          Mac mini
      Machine Model:          PowerMac10,1
      CPU Type:          PowerPC G4  (1.2)
      Number Of CPUs:          1
      CPU Speed:          1.42 GHz
      L2 Cache (per CPU):          512 KB
      Memory:          512 MB
      Bus Speed:          167 MHz
      Boot ROM Version:          4.8.9f1

Maybe you are looking for

  • How can I convert RGB Color to Black-White Color?

    Dear everyone! I am using Photoshop CS5. I have got a file from my customer which is done as RGB and the resolution is 300dpi. There are black texts and color images in the file. I wish to print Black-White Process Film (1 black color), but I don't k

  • The folder path "" contains an invalid character - Can't instal Quicktime

    Every time i try to upgrade my Quicktime, or try to run iTunes, i get the error message 'The folder path "" contains an invalid character' Haven't a clue as to what's causing it, or how to solve it. I have just installed XP again (Windows XP Professi

  • Is it necessary to create a Billing Plan for the Service Contracts

    Hi All,   Is it necessary to create a billing plan for the service contracts.   My requirement.   In CRM 7.0, we created a service contract. For the item in that service contract there is a Billing Plan tab.   In that tab we have the dates for Period

  • Process Map in Workspace

    Hi all, We are using a clustered environment in QA. When we click on a Work Item and then on Work Item Details inside the BPM Workspace and then click on the Process Map on the right hand corner of the Work Item Details , we DO NOT see the Process Ma

  • RTX 4088 dualphone Problem

    My RTX 4088 dualphone serial number is 0003070700865. I can clearly hear the voice from the caller but my voice can not be heard clearly at the other end. I have made a reset and firmware update already but the pronlem still persist. This problem is