Mac Mini Power and Standby help - Boot camp XP

Hey guys, I am an apple freak. Got a mac pro,mac book pro and now a mac mini! I upgraded the ram to 2gb.
I cant figure out why I cant get the computer to come out of standby correctly with xP? the screen doesnt come up at all, though sound seems to work. I have it attached to my plasma via dvi, and was plan on using it as a media center (sagetv) system.
I also was wondering, if I just forget about the whole standby issue, how much energy does this thing take? I mean, will going into standby really save that much energy?
Thanks
Mo

Hi,
For issues with Boot camp it is best to ask in the offical Boot camp forum (http://discussions.apple.com/forum.jspa?forumID=1165)
Mac Mini 1.6 Core Duo Mac OS X (10.4.9)

Similar Messages

Hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher"

hi, i am badly in need of help. i partitioned my mac hd yesterday and now the boot camp is nt working as i was using win 7 on it. i am using macbook pro 13'' 2011. plz help me. anxiously waiting for response... specially from "Christopher murphy"

you can't add or mofidy partition numbers. especially not if and once you have windows installed.
boot from Windows 7 DVD afterwards
but first you have to tell us and Christopher what and how you partitioned your system.
Successful setup of OS X Lion + Data Partition + Bootcamp Win7 Ult
https://discussions.apple.com/thread/3293948
So after many, many hours I think I've finally figured out how to successfully setup Mac OS X Lion on one partition, a seperate data partition, and Windows 7 Ultimate on a Bootcamp partition . Here is a screenshot of my setup on my 13" MacBook Pro
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090
Paragon CampTune
Paragon CampTune is a commercial product that is designed expressly for this task. http://www.paragon-software.com/home/camptune/ It consists of a downloadable ISO that needs to be burned to a disc and booted from in order to resize the partitions costs US$19.95.
Securing Dual-System Configuration
Imaging is still the most affordable and robust way to secure computer data. Unfortunately Mac OS X backs up only HFS+ volumes, leaving Windows with dual-system configurations unsecured. You can permanently lose all of your data unless you have a Windows-compatible backup solution.
Paragon’s CampTune and Paragon’s Drive Copy for Mac can secure the entire dual-system configuration. CampTune creates traditional images of volumes or entire hard disks, Drive Copy can copy them to other disks. In case of an emergency, you can restore the previously created image or copy all your data back to its original state.
GParted Live
GParted Live is similar to CampTune as it is also distributed as a bootable image that needs to be copied to a CD/DVD or USB flash drive. As free and open source software, distributed under the GPL, it will always be available free. Since it has more functions than CampTune, it may be harder for folks who are not as experienced with partitioning hard drives. http://gparted.sourceforge.net/
iPartition
Coriolis Systems' iPartition is a £29.95 ($44.95 US) utility that runs in Mac OS X and allows resizing of all of the relevant partition formats, including HFS+, FAT32, and NTFS. It provides a Mac-oriented user interface that may be easier to manage than some of the free utilities. As it is not capable of resizing the boot disk, it requires a bootable external disk or a boot DVD. (A tool to create a boot DVD is included.)
Paragon Partition Manager
From the makes of CampTune is a commercial tool that is similar in functionality to GParted Live, but has a more polished/friendly user interface than GParted Live. Previously only the US$79.95 Professional version supported all the features required for this, but as of version 11 the US$39.95 Personal version has also been reported to work. http://www.paragon-software.com/home/pm-personal/
Winclone/Disk Utility
Winclone is a free tool for creating and restoring backup images of your Windows partition. One of its key features is that it can restore to a larger partition than the one the image was created from.
NOTE: Winclone has been discontinued, but for now remains available and capable of completing these tasks (including creating and restoring Windows 7 images).
Winclone updated to support Lion Winclone updates and download
Disk Utility can resize HFS+ (Mac OS) partitions, but is currently incapable of resizing NTFS partitions, so you could use it to reduce the size of the HFS+ partition and create a new larger placeholder MS-DOS (FAT) partition
The full process would be:
Backup Windows partition with Winclone.
(if the new Windows partition is smaller than the old one make sure you set the preferences in Winclone to save the image as an uncompressed dmg)
Delete old Windows partition
Resize current Mac Partition
Create new Windows partition as MS-DOS (FAT) in free space after Mac OS partition.
(If the new Windows partition is smaller than the old one an additional step is required: shrink the filesystem on the image by selecting Tools->Shrink Windows (NTFS) Filesystem)
Reboot your computer for the new Windows partition to mount properly (winclone may not restore if you don't reboot)
Restore Winclone partition over new Windows partition
An alternate Winclone based process is described in the External Guides section
Native OS utilities
MR user Kazyua reports that you can use the disk management utilities provided with the current operating systems if you want to do it manually. Windows 7 and OS X both have partition resizing functions built in. In OS X, open Disk Utility and manually shrink the mac HFS+ partition by dragging the lower right corner. Then in windows go to the start menu and type "disk management" into the search box then hit enter. You should get an overview of the drives you have and the individual partitions. Right-clicking on the partition gives an "Extend Volume" option. The Windows NTFS volume should then be extended into the free space you created with Disk Utility. This method has not worked for other users, so try at your own risk.
Resizing under VMWare Fusion
If you are looking to allocate more space to Windows under VMWare please refer to the following thread http://forums.macrumors.com/showthread.php?t=828182
From http://guides.macrumors.com/Extend/Resize_Boot_Camp_Partition
Thread with suggestions on Windows backup methods:
https://discussions.apple.com/thread/3798090

Mid-2010 Mac Mini - black screen after installing boot camp drivers

I successfully installed Windows XP Service Pack 2 on my new Mac Mini. The display worked without issue in XP at this point.
After doing this, I proceeded to install the boot camp drivers. They installed and automatically rebooted the machine.
After reboot, Windows XP no longer has a functioning display. The display is a black screen and eventually the monitor shuts off.
Things I've tried:
- Reset PRAM
- Reset SMC
- Tried both Mini DisplayPort and HDMI connections to connect to the HDMI port on the monitor
- Booting into Safe Mode. Holding down F8 successfully brought up the Safe Mode options, but again the display was blank after choosing the Safe Mode option and attempting to load Windows.
Message was edited by: mullingitover

Update: Other stuff I've now tried--
- Swapping out RAM modules. I've tried it with the stock 2GB sticks in place, also with a single 4GB stick. Same result.
Other interesting/troubling problems:
- Unable to boot into Safe Mode with command line. The text-only interface with safe mode options that is reached by pressing F8 during windows startup is displayed. However, no matter which option I choose, the result is a dead display.
- Unable to boot with Windows XP install CD (?!). After choosing the CD at the boot selection screen, the display blanks and never wakes up.

Just Bought New Mac Mini Server and Need Help on Migrating Old Single User

This is for my home / home office The issue is I was unable to connect to my old computer using migration assistant for some reason, but I didn't want to go down a rabbit hole to figure it out.
I would like to transfer all of my applications and prefs / settings to the new machine and I was thinking about using a synching program to do it so I wouldn't mess with the SL Server settings. I suppose I could do this manually but am concerned some hidden files or settings may not get moved properly. I am able to mount my old hard drive on the new mini so I just need a strategy. Thanks.

Good question - my angst is subsiding as I type. I was concerned that my preferences and other application linked things like Application Support were the same as it was, but I suppose if I have to mess a bit with it upon opening or reinstalling a program is the worst thing that will happen. After going thru the list of programs I realize that like most people I regularly use about 15% of the things in my Applications folder. The biggest hassle is Adobe CS4 which I need to get reauthorized by Adobe and this could only have been solved if I de-authorized it before blowing out my earlier computer. Luckily that is worst issue I am encountering.

Mac mini 2009 mavericks won't boot. Blank display no logo,etc. Tried all keyboard boot functions, no help. replaced RAM w/known good. No help. Removed HD mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite a

Mac mini 2009 Mavericks won't boot. Chimes and power light comes on. USB ports have power. Blank display no logo,etc. Tried all keyboard boot functions, no help. Replaced RAM w/known good. No help. Removed HD and mounted in external enclosure and ran permissions and repair. No help. Upgraded HD to Yosemite and was able to boot another mini from HD mounted in external enclosure, reinstalled HD still no boot. Any ideas on how to proceed appreciated.

- Make an appointment at the Genius Bar of an Apple store. You have a hardware problem.
Apple Retail Store - Genius Bar

Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting beeps

Need help!!!! I've got an old mac mini G4 and while adding a cd to itunes, there was a power shortage to the house. Now when I try to reboot I get three beeps and the CD is still stuck in the mac. How do I get the CD out and is that why I am getting the three beeps?

If you can't eject a CD or DVD or open the drive tray
How do I eject a defective DVD?: Apple Support Communities
How to eject a CD on a MAC mini with PC keyboard and mouse « FAQforge
From:
Mac computers: About startup tones
3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data intregrity check.
1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

I need help with boot camp. "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

This message appears every time I try to partition my disk:
"Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
I verified my Macintosh HD disk on Disk utility and then tried to repair it, but I am unable to click the repair button.
It says it's not available because the startup disk is selected.
I don't know what to do or how to go about both these problems.
Please, any suggestions?

[SOS]Which mac mini device can install dual boot(Lion and Mt Lion)?

Salutations!
Due to my assignment, I need to get mac mini device which support dual boot.
Which mac mini device model/firmware can we install dual boot(Lion and Mt Lion) on it?
I got late 2012 one, but it looks like it does not support.
Please help me.
Thank you so much,
TriQuang

Hi Niel,
Thank you for your fast reply. So if I buy mac mini MC815 model, which comes with preinstalled Lion I can run dual boot(Lion and Mt Lion)?
I have one more question: Can I install Mac OS 10.6 on that mini device? If it's not supported which mac mini model can I get to support Snow Leopard and Lion and Mt Lion?
Thanks and best regards,
TriQuang

I can't remember my mac mini password and can only log in under test, please help

I can't remeber my Mac mini password and can only log in under Test. Please help me as I would like to access my photos and personal information. Thanks

Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

I updated iTunes on my Mac mini power pc and it nolonger works with my ipod. I can no longer manage my music.

System SW said there was a new iTunes update so I updated and now I can't sync of manage my music on my iPod?
Mac min Power PC
Thanks,
Ken

In iTunes go to View>Show Sidebar.

HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help

Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK. Something about the Migration Assistant is being missed, but I have no idea what it is.
Help

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

I just bought a new Mac mini but cannot complete the set up and I could not pair my apple wireless keyboard with mac min. Can someone help?

I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?

Bluetooth: How to set up your Apple Wireless Keyboard

Mac Mini Power PC G4 1.5GHz issue

I received a Mac Mini Power PC 1.5GHz and for some reason it has an earlier OS X installed on it then what it originally came with. Right now it is running 10.3.9. Originally it came with a version of 10.4. I managed to get the original install DVD's for it but I cannot install them because they are bundled software and the Mac Mini doesn't realize it is a Mac Mini anymore because of the older OS being installed on it I believe. When I go to the "about this mac menu" it states that the computer is a PowerMac 10.2 and not a Mac Mini. I would really like to put the original software on it and get it sorted out but when I put the original install DVD in it says, "this software cannot be installed on this computer" and it is the right software, not the intel based software. Any ideas on how to restore this Mac Mini?

So I need what you have. These bundles seem pretty hard to come by. I have searched the web and haven't really found any sources for them.
If you call Apple support, they'll sell you a set for around $50. You may still be able to find a retail Tiger package for less than before Leopard came out, if you want to go that route. If you qualify for an educational discount, you might find a copy at a local university computer store.
I don't know if this additional information helps ... on the outside of the envelope containing the two discs, it says 2Z603-8387-A Mac mini Media; Multilingual. There's one other number on the other side of the bar code: PD11302005

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

Look up "screen sharing" in help
You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse. Choose your mac mini's name, and look for the "Screen Sharing" button.
Choose Apple menu > System Preferences, and then click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users:
Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users:
Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen:
Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password:
Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

I still have a mac mini power pc g4 that is perfectly good in use at my business. i have upgraded my mobileme on my other macs. is it so that i will no longer be able to sync to mobileme on this mini?

I still have a mac mini power pc g4 (os 10.4.11) that is perfectly good in use at my business. I have upgraded my mobileme on my other macs (mini using 10.6.3 & macbook pro using 10.5.8). Is it correct that I will no longer be able to sync to mobileme on this mini?

I personally use IX Webhosting for a couple of reasons:
Fast reliable personal tech support by phone, instant chat, & email
They allow unlimited domains "www.yoursite.com", unlimited email accounts, unlimited bandwidth
And, price they are very reasonable plans start @ $3.95 USD a month
http://jeffnitschke.com/IXWebHosting.html

Mac Mini Power and Standby help - Boot camp XP

Similar Messages

Maybe you are looking for