Mac mini's memory and snow leopard?

Alright so I have a mac mini. Runs on tiger. Well a friend bought me the sims 3 for my birthday but comes to found out i need os 10.5 and higher. Well I went out and bought snow leopard since it was cheap and THEN come to find out i need 1 gb ram.
To be honest i know nothing of computers.
so i check the memory and it says 512 mb
is that my ram?
if so are there tiny pieces of ram floating around my computer or do i need to buy another ram card?
really i might take it to the apple store to get it done but i don't feel like spending money on an analysis
thanks in advance

is that my ram?
Yes.
if so are there tiny pieces of ram floating around my computer or do i need to buy another ram card?
Yes to both.
A CoreDuo has a fairly weak graphics chip, so it may or may not be able to run the Sims 3 depending on the version it has. Read the specs on the graphics card on the software package's exterior. If it says Core2Duo or higher required, you can't run it on a CoreDuo machine. If it says ATI or nVidia required, you probably can't run it on a Mac Mini of that age.

Similar Messages

My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?

What am I missing here. I'm sure it is some kind of sitting that is not right.
Thanks Pat

Sounds familiar:
lllaassJan 6, 2015 2:12 PM Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?
Re: My husband has a Mac mini, vintage 2009, running Snow Leopard. All other computers and devices in the house are able to connect to our wireless network, but since I upgraded his computer to Snow Leaopard it won't connect. What is the problem?in response to Patricia Isaac1
Power off and then back on the router
What happens when you enter the network's PW?
Try forgetting/deleting the network if necessary. To do that go to System Preferences>Network>wifi>Advanced and select the network and click on the minus sign
Csound1 wrote:
Turn off the modem and the router, wait 60 seconds. Turn on the modem, wait 60 seconds, turn on the router.

HT201364 is there any way to update to OS X from a non-aluminum Macbook from 2008 that has the 2 gb of memory and snow leopard installed, with 8 gb of free space?

is there any way to update to OS X from a non-aluminum Macbook from 2008 that has the 2 gb of memory and snow leopard installed, with 8 gb of free space?

The Early 2008 MacBook can only go up to Lion...the compatibility requirements for Mountain Lion and Mavericks are the same http://www.apple.com/osx/specs/ which says Late 2008 MacBook.

Se puede instalar en una mac mini mid 2011 el snow leopard, Help..!!!

Acabo de adquiir una mac mini mid 2011 pero viene con el lion y necesito cambiar de sistema operativo a snow leopard, de que manera de puede hacer, ya intente con muchos discos de instalación originales y con ninguno se puede

Hola,
Depends ehich MBP a bit...
MacBook Pro "Core i7" 2.5 27" Late 2011... Geekbench: 10706/11699
Mac mini "Core i7" 2.6 (Late 2012)... Geekbench: 11367/12807
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651
iMac "Core i5" 2.7 21.5-Inch (Late 2012)... Geekbench: 8068/9145
Mac mini "Core i7" 2.3 (Late 2012)... Geekbench: 10626/11825
iMac "Core i7" 3.1 21.5-Inch (Late 2012)... Geekbench: 12490/14143
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651... Geekbench: 12857/13772
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Caught in a conundrum while trying to upgrade a Mac Mini (mid 2010) from Snow Leopard to Mountain Lion

Hi gang,
I am in a very frustrating position as I try to upgrade my Mac Mini (mid 2010) from OS X 10.6.8 Snow Leopard to whatever the latest version of Mountain lion is. The reason I am doing this is because the original hard drive died and the Mini sat there for 6 months before we decided to get a new hard drive and revive it.
I installed a new 500GB 7200rpm SATA drive and the problems began.
First I couldn't get Mountain Lion installed as a fresh OS installation (using both a USB drive and a DVD to no avail). It just wouldn't go. The grey Apple logo/loading screen would come up and just sit there doing nothing while the loading icon spun.
I then tried installing Snow Leopard (the OS that the Mini came with when it was new). After some messing around, that got done.
However, a peculiar thing happens when the Mini boots. Everything loads up into Snow Leopard, but although the mouse curser moves, I cannot click on anything or use the keyboard for 4-5 minutes. Then it just work (I am typing this on the Mini). This happens every time.
Now, when I updated to 10.6.8, I was able to load up the App Store and download the Mountain Lion install app. I clicked it and went through the initial copying of files and then the restart, but after the reboot, the grey loading screen would not progress. I rebooted again and held down the Option key to check out the available boot volumes, and all I saw was the installation DVD I had in there for Snow Leopard and a hard disk volume called "Mac OS X Installer."
So I booted into the Snow Leopard install DVD and opened Disk Utility to check things out. I did a verify disk and a permissions repair. Interestingly, the first repair I did gave me the message that the ACL was missing from Volumes and that is was fixed. I read something somewhere which talked about the Access Control List and mouse/keyboard issues. But who knows. When I boot back into the Mini as normal I am returned to the fully-functioning Snow Leopard installation, like nothing happened.
And now here is the kicker: it appears that the Firewire bus is hooped. In the Profiler, when I view the FireWire settings I get the message, "Warning: Unable to list FireWire devices." So I am pretty sure the one thing I cannot do is boot the Mini into target disk mode attached to my Mac Pro and installed Mountain Lion that way.
So to recap: I can't finish the Mountain Lion installation because the install won't continue after rebooting because there is something wrong with the underlying base system, which might be hardware (FW bus) related. I think.
Some things I have tried:
Resetting the SMC
Resetting the PRAM
Reparing permissions
Booting into Safe Mode (doesn't work)
Booting into Verbose Mode to observe what happens (I get the "Can't load the Bootcache.playlist" error, which I suspect is related to the screwed up FW bus)
Trying to boot using Internet Recovery (doesn't work)
Booting into Single User Mode and attempting the "fsck -y" etc. sequence to try and repair the ACL that way
So I am stuck.
I guess the question is, should I get an external HD enclosure and install Mountain Lion onto the hard drive that way and hope it works when I put it back into the Mini?
Any other ideas? I have spent a couple days ******* around with this is am running out of ideas...
Any advice would be appreciated!

Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

Latest version that will work with Mac mini Core SOLO under Snow Leopard?

Latest Flash Player 11 versions will work with Snow Leopard, but they say they require a Core Duo or newer processor. What is the last stable version of FP that will work on my mom's Mac mini 1.5Ghz Intel Core Solo (running OS X 10.6.8)?
Have searched archives and web for this and still draw a blank. Thanks!

Fixed it!
I mounted it in target mode again and manually applied the 10.5.4 combo updater ad it now boots again.

Mac Pro Nvidia 8800GT and snow leopard 10.6.4 problems

I have a Mac pro 1.1 with a Nvidia 8800GT and I have having a lot of problems since update to snow leopard latest release. My computer start to show lines and giggle with lines static and then freeze, it make so bad that you can't do anything even restart the computer does not solve the problem. I have reset the pram and all possible solution available. Maybe the video card is going to die soon?

My MacPro 3.1 with Nvidia 8800 Gt is also not HP.
Initially I was getting some video glitches just after start up but then the machine would settle down and run for the session.
about a week ago the situation got increasingly worse so that from last Sat morning its will not even boot up 4 times out of 5 tries.
Gets to the apple symbol then freezes
I've tried booting from the snow leopard install disc but even then its freezes and I see many video artifacts.
I've ordered a ATi Radeon 4870 to replace the graphics card as I thought that might be the issue. The 8800 GT was full of fluff I feared it had cooked itself this summer.
But now I'm concerned from reading several forum topics that a recent OSX update has effectively killed machines with the 8800 Gt card.
I can't really operate fully without my macpro as that where most of the software is held. CS5 master suite etc
My business partner did say just get another machine but i'm not happy to go down that route just yet. Yes of course a 12 core is tempting but at ££££.££ cost.
lucky I have my Macbook pro to use otehrwise i'd be

Mini Displayport, Audio and Snow Leopard

Hello everybody!
It is my first post here, so excuse me if I'm in the wrong section (and by the way, sorry for my skill in english).
I'd like to know if audio is now supported in the mini displayport with Snow Leopard?
Thanks,
Julien

I did see this, however, with a Google search.
http://www.macyourself.com/2009/07/10/kanex-mini-displayport-to-hdmi-adapter-wit h-audio-in-august/
Apparently, this product will combine the video output from the Mini DisplayPort with audio output over USB into a consolidated signal over HDMI. Pretty cool.

My Mac Mini won't acknowledge Snow Leopard disk to upgrade OS. DVD drive works fine.

Purchased my Mini January 2009 with 2 GHz Intel Core 2 Duo processor w/ 2 GB 667 MHz DDR2 SDRAM. Trying a long-overdue upgrade from OS 10.5.8 to Snow Leopard, the computer won't acknowledge the disk, and the DVD drive runs other disks.
According to other links here, I should be able to upgrade through OS 10.7 without problem, correct? (FYI, I have four USB ports on this thing.) Also, I noticed my Snow Leopard disk - purchased from Apple, not bootleg - is 10.6.3, which is what they shipped when I said OS 10.5.8 is in here. Am I missing an earlier version than 10.6.3? In any case, the disk just grinds awhile, then spits out. Nothing ever shows on the display.
I have 59 gigs of internal hard drive space available.
I'm not really tech savvy, so any thoughts?

Thanks for your response, and good call! I discovered the Mini will acknowledge other DVDs that I know have content, but displays them as blank; otherwise, it won't open/run anything. It's more than I knew before.
Looks like I'm heading to the Apple shop.

Why can't I reinstall my iLife suite of apps on my Mac Mini after having reinstalled Snow Leopard OSX?

Unfortunately my Mac Mini I use for audio production work and web design got slower and slower until one day it just gave up! I blame the internet for this, as before I started using the internet on this computer it was fine, nice and fast without any problems.
I tried reinstalling just the OSX but that didn't work, so I ended up erasing the disk with a full 35-pass option which failed itself after the eleventh pass, but it had still done what I wanted and completely erased the hardisk, so I wasn't bothered. However, now in Utilities, it wasn't finding any hardisk!!! I powered off and thankfully this time the disk was showing and so I tried installing the OSX again and this time it worked!
Next it was time to reinstall iLife that had come with the Mac Mini. No chance! Same error message every time to contact the software manufacturer!!! I've read on the communities that after 2012 this version of iLife apparently doesn't work. Is this true? If so then Apple is ripping customers off. Why should we have to keep upgrading all the time? As the old saying goes, "if it ain't broken, don't fix it!" If this is true that iLife won't work after 2012 then basically Apple is saying that its products are so crap that they won't work after a few years!! Surely not. I've also read in the communities that one person had to pay another $18 out for an iLife suite that works, what crap! Whatever came with the computer should work with the computer and not be limited to just a few years life and we shouldn't have to pay out for another disc when the original has be kept securely in its original packaging! I have an old Windows XP PC which is still going strong today and up until a year ago I had an old Windows 3.1 PC which was still working 22 years after purchase and I still had occasional tasks to carry out on it at DOS level!!
So I'm beginning to wonder whether I should go back to PCs if Apple computers have such a limited lifespan.
I look forward to your comments.

Processor = 2.4GHz Intel Core 2 Duo
Within seconds of selecting the disk and clicking on the install button the following error message comes up:
The installation failed.
An unknown installation error occurred.
The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

I have a Mac Pro 8 Core and Snow Leopard won't install from the DVD.

Any idea why?

Either your machine doesn't meet the [Snow Leopard system requirements|http://www.apple.com/macosx/specs.html] - which I can't imagine would be the case for that machine, though I don't know that for sure - or you're using the wrong disk. Note that the gray disks that shipped with one machine will not work on a different one, unless they are exactly identical models. Or, I suppose, you've got a bad disk or hardware problem.

Can i sync my ipad mini to my imac snow leopard and then to my iphone4

can i sync my ipad mini to my imac snow leopard and then to my iphone4

iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion or Mountain Lion in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion system requirements are shown here: http://support.apple.com/kb/HT5444.
If you can run Mountain Lion, you can purchase an upgrade from the Mac App Store. If you can only run Lion, contact the online store in your country and purchase a download code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Need OS X Lion and Snow Leopard for iCloud functionality but I have a windows bootcamp on my mac. Problem?

I have a windows bootcamp on my macbook. I need to download OX Lion and Snow Leopard so I can . If I do download both programs, will I loose my bootcamp functionality?
Much apprecitive.

In addition to what Kappy suggested, please check your Mac against the hardware requirements of Lion before starting this project.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Allan

Problem High running Temperature Specification iMac 27 inch Mac OS X Includes Software Snow Leopard upgraded to Mountain Lion OS X 10.8.03 (1278) 251 GB Flash Drive 2 TB Sata disk Processor 3.4 Ghz Intel Core I7 Memory 16 GB 1333 MHz DDR3 Graphics

Problem
High running Temperature
Specification
iMac 27 inch
Mac OS X Includes Software Snow Leopard upgraded to Mountain Lion OS X 10.8.03 (1278)
251 GB Flash Drive
2 TB Sata disk
Processor 3.4 Ghz Intel Core I7
Memory 16 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6970 2048 MB
Video: Software Final Cut Pro X 10.0.8
I use the imac mainly for editing Video which when doing so it has reached temperatures of near to 60° C which causes the program to become unstable and needs to be cooled down to operate correctly.
An Apple technician (by phone) advised me to download an smcfancontrol. This allows each individual fan to increase speed and also advises the current temperature at °C. The smcfancontrol has been downloaded but this has not resolved the problem. By increasing the speed of the fan more heat is generated and creates additional noise.
I have since taken the iMac to an Apple Store for examination as suggested by APPLECARE when the fans were found to be working correctly. An Apple Store technician carried out a test, but not whilst working under the pressure of FINAL CUT PRO when the iMac generates a high temperature.
The Temperature Specification for this model is
Operating Temperature 20 °c to 35°C
Storage Temp.47°c
Clearly the temperature my iMac is operating at is excessive and could cause the computer to break down prematurely. Has anyone experienced this problem.
Frank Howell

When was the last time you cleaned/vacuumed out all of your iMac's vents, slots and ports.
You need to do this with the iMac powered down, disconnected from power and everything disconnected.
Lay your iMac, screen down, on a soft surface, like a heavy towel. Use a small electronics vac, or portable or full size vac with hose and a crevice tool attachment and carefully and slowly vacuum every vent, slot and port on your iMac.
Then reconnect everything up, power up and download and install iStat Pro. Start working, then report the temps of your iMac after this has been done.
When using SMCFan Control, it is important not to run the fans at too high an RPM. This doesn't generate heat on its own, but will suck in more dust, lint and dirt into your iMac, and that will be the cause of additonal increases in heat.
I run my fans in the range of 1400-1600 RPMs. You can go as high as 1800 RPMs but it is important to keep the RPM range below either 1800 or below 2000 RPMs.
I, also, run a very small desktop fan pointed toward the upper back of my iMac to keep temps down even further.

Mac mini's memory and snow leopard?

Similar Messages

Maybe you are looking for