Mac Mini Server freezing in install when choosing PPPoE

I have a Mac Mini Server and when I go through the installation procedure and choose the connect PPPoE from the Network settings, the installation hangs every time.
I have already tried several clean installs from the Mac Mini Server disc to no avail.
Suggestions?
Thank You.

What part of the install process do you have trouble with? I'm assuming, and I think Tony did as well, you're talking about the server setup assistant that launches once the OS is installed. Naming your server/domain is a critical part of setup, as is DNS. If you put faulty configs in during setup, or try to setup services before DNS is working, you'll run into trouble - so please include whatever you're trying to do - if you're new to servers, most everybody around here will be helpful or at least understanding.
In any event there's a great tutorial at
http://www.wazmac.com/serversnetwork/fileservers/osxserversetup/index.htm
While I agree with Tony that PPPoE isn't the best bet, you ought to be able to make it work - but you will need a static IP for your server. Best bet is probably to make it a static IP on your LAN using NAT and let your router/firewall have the live IP. But more info is always better - what are you trying to setup and what other equipment/network stuff is already going on? There are a lot of ways to setup a server and to setup a network, and there is certainly no one correct solution. Somebody smart (like Tony) may be able to give you a lot more options with more details. I'll try too, but I'm far from the most knowledgeable person around these parts.
Another thought - if you're not using the advanced server, I believe you need DNS set up beforehand somewhere - if you just enter your ISP's DNS server info, it won;t have any records for your server. The Wazmac setup notes will walk you through setting up your own DNS for your LAN and using your ISP's DNS for everything on the WAN side.
Message was edited by: Jeff Kelleher

Similar Messages

Mac Mini Server freezes hard, too hot?

Hi,
Our Mac Mini Server (half a year old) with the newest system crashes hard now and then.
It could run for up to three weeks occasionally but now in the summer it could sometimes only run for minutes until it hangs hard with frozen mouse and clock.
I have found no other way than resetting by the power switch.
According to the technical specification it should handle up to 35°C environment. (Right now we have 28°C in the room here.)
It seemed to help a bit by installing smcFanControl and increase the fan speed.
It will crash even without any work being done on it. No special applications started. No network traffic.
If the exhaust temp is above about 32 to 34° the problems seem to worsening. Now it is 37°C despite full fan speed (5500 rpm) and it crashed after minutes.
Sometimes it will even hang during the boot process.
Have anybody else heard about such problems?

Hi MalcomKay,
I had to open a service ticket as Jiri suggested. The technician was pretty sure the crashes were caused by a defective Airport board and exchanged that (despite I doubted that and never used Airport for the server).
I came back home (2x2x120 km of travel) and started the Mac Mini Server up. I booted and run the AppleServerDiagnostics.app test from an USB. It lasted 15 minutes (until it was warmed up) and then crashed so hard it was not counted by the test. It just froze hard. It crashed when running the memory test. It always crashed before finish when running that test!
I returned the server to the Apple Service (another 480 km of travel). This time they exchanged the whole motherboard. They tested it running intense traffic and operations for one full week without a freeze. So it was a faulty mother board!
Now it has been running like a charm for months.
This is not the first temperature problem affected board Apple has delivered to me.
Good luck! /Johan
Tips: Prepare an USB stick you can boot from. It is so frustrating to have a computer without a dedicated DVD where you can boot from and run the hardware tests.

Mac mini server freezed

our mac mini server was freezed and try to restart, but the apple logo and the spinning gear keep running.
I try un-plugged it but same thing the spinning gear logo keep running.

See if you can restart into the Recovery HD by pressing/holding Command+R at the boot chime. Then, open Disk Utility and do a Verify Disk. If there are errors, then do a Repair Disk.

Mac Mini Server with Windows installed?

I have a windows application for a business otherwise all mac OS. Want to run the windows app on a mac mini server allowing access from multiple workstations. Desire to not committ entire mac mini server to windows so will need to partition I assume. Any thoughts?

You could try virtualizing the windows machine
Virtual box is free I can't remember if it's free for commercial
use
Or VMware or parallels
You could also try wine it's open source
And allows running of (some) windows programs on Mac
I've had mixed results with wine I haven't used it for ages
Personally I think virtualizing would be the way to go
Virtualizing would allow you to have snapshots and
Backups would be somewhat easier
If your unfamiliar with virtualizing
It basically runs a compete OS as software on the host machine
You can virtualize osx server on osx server if you desired
Or most other OS, Linux, BSD, windows, windows server
You just need enough grunt hard drive space and ram to host the virtualized OS

Can I install Snow Leopard on Mac Mini Server hardware?

What I would like to do is buy the Mac Mini Server but I don't need the server OS. I want the desktop OS on the Mac Mini Server. Will installing Snow Leopard on the server hardware be just like installing it on a regular Mac Mini?
Or should I just wait and see how Lion shakes out?

Thanks Indy, I already had proceeded the installation according your tip. Just an objection related to the updates: I was able to install the OS updates only while in target mode, as when I made 2 attempts to update the version 10.6.6 to the current one (10.6.7 - the combo one and the MBP version too) it was not permitted. I had to plug the FW cable into the MBP again and update the Mini's OS (using the special MBP version of 10.6.7) in target disc mode. I want to use the Mini as a media server and intend to install Windows 7 on the other HD which now hosts the server OS. However, according to one poster (Sven G) there are some problems (I don't know exactly what they are) related to Boot Camp software. Have you any information about these problems?
I have maintained both OS (standard and server) living side by side on the Mini, is there any problem with that?
Again many thanks, you were succinct, right to the point, and your tip just proved itself correct.
Cheers
Marola

Mac mini server hang at startup

My mac mini server (1st gen) installed with Lion server has a strange problem.
At some point, it stop to deliver it services (imap, dhcp and ical server). I connect on it (wich take a long long time), make it restart by the system menu entry.
It restart, and stay forever with the blank screen with Apple logo and the waiting circle which loop.
No way to restart.
I then boot on a Mountain Lion installation USB key (I loose my Lion one :-( ), choose the restore from time machine option, selecting the last entry on my Time capsule, everything goes well, and the server restart with no problem. I can even restart it by the system menu.
But after 2 or 3 month, it has the same problem, and again no way to restart without restoring the last time machine backup.
It's now the third time it does this, and it's make me go crazy.
I've try to start in verbose mode, and I have the following fsck error message :
disk0s2 : I/O error.
Invalid node structure
(4,26622)
the volume on macintosh hd could not ve verified completely
fsck failed !
I've try to start on single mode and do the fsck -fy -> same result.
Does someone has an idea of why it does this ?
Regards,
Marc

Just recently I ran into a problem when I tried to Verify my hard disk and when it tried to verify the catalog, it responded "Invalid sibling link." Repair Disk didn't work. I searched the web and Apple's site, and couldn't find anything useful except to buy DiskWarrior or reformat the drive. Knowing that OS X is built on Unix gave me a few clues on how to proceed. The solution is pretty simple:
    1.    Boot off the OS X CD (reboot, hold C while booting).
    2.    The installer will load up, go to Utilities in the menu and run Terminal.
    3.    Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.
    4.    Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.
    5.    Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step.
Just for fun, you might want to run another fsck_hfs on your disk (use the -f option because your drive is probably journaled). Hope this helps someone so they don't buy a program that's going to do pretty much what we did with fsck_hfs, and so they don't waste time searching for an answer to no avail. By the way, TechTool Deluxe (3.1.1) didn't find the Catalog problem for some reason (you'll have this on a CD if you have AppleCare), which is why I resorted to fsck.
http://hints.macworld.com/article.php?story=20070204093925888

Mac Mini Server will not go into recovery?

I've just bought a Mac Mini Server 2012 model, and when I try and boot to recovery or safe mode, the boot hangs, then the machine restarts with the 'Your computer restarted because of a problem' message. The machine boots to normal mode fine, and can also boot to startup manager, which shows a recovery partition. I've tried resetting the NVRAM, as well as booting straight from Apple's servers. Both have not helped. The previous owner said he reinstalled OSX from recovery before he gave it to me, which leads me to believe it could be something other than a faulty drive. In addition, Disk Utility has not thrown up anything. If anyone could shed some light on this at all it would be very much appreciated as I'm starting to get a little bit annoyed!
Thanks.

The first thing you should do after acquiring a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the gray installation discs that came with it. If you don't have the discs, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, it should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

Does the Mac Mini Server include iLife?

Hi,
I couldn't find a question to this anywhere...
I'm considering buying a Mac Mini Server soon.
Question - Does the Mac Mini Server include iLife?

When Apple first came out with the Mini with Snow Leopard server, even their sales support people said it came with iLife. (They no longer make that mistake.)
By using the statements of sales support and by referring to the claims on the iLife page (which you quote) -- with some insistence on my part -- I was able to get AppleCare to send me iLife for free. Worth a try. Though frankly, my time would have been better spent just buying the iLife.

I am having keyboard problems when trying to boot up an OS (bootcamp on Mac Mini Server)

I recently tried using bootcamp on my new Mac Mini Server.
I uploaded a windows ISO Image perfectly the way it asked, Windows 7, I followed the correct steps, euqally divided one of the hard drives, and I was ready to actually set up the new Windows section of my computer. During this booting session, my dog came in the room with her ball and knocked the computer plug out of the socket. Now when I turn on the mac, the fan still works, the same Macintosh sound comes up, the screen turns that usual very bright gray, but it stays on that gray. After a minute or two, the screen turns black, with a blinking underline, as if it were confused to choose which operating system it has to boot.
My problem here is that I use a wireless keyboard (not by Apple) -- and I suppose that bluetooth syncronizes with the OS and not the computer system itself -- so my keyboard commands do not get recognized in order for me to navigate into Windows 7 or OS X Mountain Lion. I tried solving this problem by purchasing a brand-new USB keyboard (since Mac Mini Servers do not have the PS/2 entrance). I guess this new USB keyboard didn't work, I imagine, either because the USB slots on the machine are not recognized by the computer's internal system, only by the Operating Sysytems (which I hope isn't true), or that the mac had never used that USB Keyboard and wasn't going to be capable of using it until it had installed the necessary drivers, but without the OS running that would become impossible.
So my question is: Is there a way that I can connect a keyboard to the mac so I can continue installing my alternate Operating System? Is it maybe another problem all together?

It is starting to sound more like Bootcamp failed to install properly.
Have a look at > Boot Camp 5: Frequently asked questions
then perhaps > Failed bootcamp instlation - Google Search

Instability in 2012 Mac Mini Server after Yosemite 10.1.1 Install

I bought a NEW 2012 Mac Mini server on clearance in the online Apple Store last month. I had a 256 SDD installed as startup drive along with Yosemite earlier this week. It crashes, freezes and randomly restarts. Not sure where to start with trying to figure this out. Any help would be greatly appreciated.
It happens under various circumstances but here is the report on the latest that happened a few minutes ago. I had clicked on the Desktop Icon "Macintosh SSD", the boot drive. I got the spinning wheel and then a spontaneous restart.
I apologize if too much of the report is included here. Not sure where to stop.
Crash-panic Report. When I clicked on Macintosh SSD (Boot Drive) I got a spinning wheel followed by a system restart.
Anonymous UUID: C76AE31B-9D00-CD21-F920-DF88D8F8A0C9
Fri Jan 23 12:15:49 2015
*** Panic Report ***
panic(cpu 6 caller 0xffffff8004fc4594): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.1.97/bsd/kern/kern_exit.c:361
Backtrace (CPU 6), Frame : Return Address
0xffffff8018f13e50 : 0xffffff8004b3a811
0xffffff8018f13ed0 : 0xffffff8004fc4594
0xffffff8018f13f40 : 0xffffff8004fc425c
0xffffff8018f13f50 : 0xffffff800504dcb2
0xffffff8018f13fb0 : 0xffffff8004c3ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000004800000
Kernel text base: 0xffffff8004a00000
__HIB text base: 0xffffff8004900000
System model name: Macmini6,2 (Mac-F65AE981FFA204ED)
System uptime in nanoseconds: 10149976048674
last loaded kext at 9896523213358: com.apple.iokit.SCSITaskUserClient 3.7.0 (addr 0xffffff7f87299000, size 36864)
last unloaded kext at 9957569541796: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f87295000, size 16384)
loaded kexts:
com.apple.filesystems.msdosfs 1.10
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleMikeyDriver 267.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPort.Brcm4360 901.19.10
com.apple.driver.AppleSDXC 1.6.5
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.driver.AppleBluetoothHIDMouse 185.3
com.apple.driver.AppleHIDMouse 185.3
com.apple.driver.IOBluetoothHIDDriver 4.3.1f2
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOHDAFamily 267.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
System Profile:
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10E), Broadcom BCM43xx 1.0 (7.15.124.12.10)
Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
Thunderbolt Bus: Mac mini, Apple Inc., 23.4
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655302D474E2D4620
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655302D474E2D4620
USB Device: Hub
USB Device: Hub
USB Device: Hub
USB Device: IR Receiver
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Serial ATA Device: OWC Mercury Electra 6G SSD, 240.06 GB
Serial ATA Device: HGST HTS721010A9E630, 1 TB
Model: Macmini6,2, BootROM MM61.0106.B03, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.8f0
Network Service: Ethernet, Ethernet, en0
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In

Glad that you got it solved, John. That model was only replaced at the end of last year, it is not that old and far better in terms of flexibility than the current models. Although the current models are growing away from SATA and towards PCI which, in its logical conclusion, will be faster ito access (read and write), speeds.
Linc's advice was 100% spot-on.
Have fun with your 'new' Mini
Leo

Mac mini server 2011 with regular lion - lion freezes all the time!

I have installed a regular OSX lion 10.7.3 on my brand new mac mini server 2011.
I called support today they told me it would not be possible but with a bootable USB im just able to install a regular OSX lion since I dont like the server features and bought the machine for development ( coding ).
When doing an internet recovery OSX lion server will be installed. This is higly unwanted but I guess the installer checks the hardware and installs the server version since that would be the "correct" version.
Now it keeps locking up everytime, even after a time machine backup I did and hoped that clean install would have fix this,
problem still persist.
When it lockups and I reboot on login screen I can:
only move the mouse up and down
when I type 1 keystroke on keyboard the password field is filled with multiple charachters dotted out because of the password field
3 questions
Is running a reguler lion ( not server version ) on a mac mini 2011 really not supported causing my issues? It feels like unlogic since the regular lion installer installed just fine, it should have given a warning that its not possible to install on my mac mini server therefore I see this as a "ok" it can be installed without problems?
Anyone has regular osx lion on mac mini server without any problems?
Is there anything I can do to determine the cause of the freezes? The console does not mention anything
This is higly frustrated, I dont dare to fully spend some hours to restore the system to a workable state for me ( install apps, coding enviroment, xcode etc) since it feels unstable and i dont want to spend time and have to do everything over again :S

1. Go to System Preferences.
2. Select Engery Saver
3. Slide the setting for Computer sleep to never.
4. Slide the setting for Display sleep to never (though I believe the display should be able to sleep without much issue.
5. Make sure the following are not selected:
a. Put the hard disk(s) to sleep when possible.
b. Allow power button to put the computer to sleep.
6. Make sure the following are selected:
a. Wake for network access
b. Start up automatically after a power failure
c. Restart automatically if the computer freezes.
Good luck!

Installing Snow Leopard on Mac Mini Server

I recently purchased a 1Tb 4Gb Mac Mini Server, running Snow Leopard Server. I want to use it as a central repository for my other macs: storing music, movies, backup, screen sharing (it's hooked up to my 32-inch TV) but I also want to be able to run Logic Pro, Ableton Live, etc. I also have a Macbook Pro running Snow Leopard Client, which contains all of my programs, plugins, data, etc. I realize that Snow Leopard Server does not have migration assistant, so I have tried to install a retail copy of Snow Leopard onto the secondary drive, but when it gets to the restart stage it crashes every time. I think this is a firmware issue, because the Mac Mini has a different hardware configuration to other macs. I do not have access to the mid-2010 Snow Leopard Client for Mac Mini which would allow me to install Client and use migration assistant from there. What I would like to know is:
1/ Can I manually migrate my plugins/settings/programs to the server? If so, how? What is most crucial (and what I don't understand) is copying my audio units and audio programs (e.g. Logic Pro, Pro Tools). Because of the firmware issue, it seems more difficult than cloning my MacBook Pro to a time machine HDD and running from there... I would really like to purely clone my MacBook Pro, because I am very happy with the way it is set up.
2/ Should I just wait for OSX Lion (July/August) which seems to be a combined server/client os, install that on both machines and run migration assistant from there?
3/ Is there another method I can use? Something I am overlooking?
Thanks in Advance.

Thanks for your reply. I talked to the Apple Support again and they told me the server edition could only be used on that OS and if I wanted to use it as something else I could chose not to use the server applications, or buy a regular Mac mini. And that was all they said. Interesting since it was one of their sales persons who told me I could install Snow Leopard.
Anyway, I got hold of a client disc and it all worked like a charm.

Mac mini server (mid 2010) 10.7.2 and 10.7.3 won't install

My Mac Mini Server running Lion 10.7.1 will not accept the update to 10.7.2 or 10.7.3. I know that there have been some MacBook Pro's that wont accept the install. I have run disk utility and repaired disk permissions and verified the disk. I cant boot off a disk as Lion is a direct download from the App store. I have read that 10.7.2 was very buggy and some people were restorong back to 10.7.1. Can I update to 10.7.3 from 10.7.1. I have also tried the stand alone installers. The same problem the .dmg downloads and opens I run the install package which validates and runs. When I am prompted to restart a message comes up same unexpected error ocurred unable to install and a restart option. Its driving me nuts.

Did this Mini come with 10.6.x?
If so, Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT.

Is it possible to install and run Windows Server 2008 on a Mac Mini Server in a Virtual Machine software like Parallels

I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
Thanks

From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed.

2010 Mac mini server remote install OS X failure

I tested re-installing OS X remotely to my 2010 Mac mini server. It worked the first time. I got to the installation process, and abandoned it without actually doing anything.
But when I tried again, it failed, and I have not been able to get it to work ever since. I went to a local Apple shop and tested at its Genius bar. People there cannot figure out the problem. They exchanged my unit for a new one.
I took the new unit home, tried, and it failed again. Then I called Apple Care. They cannot pin-point the problem, but suspected that, since I failed with two units, the problem may be with the computer that has the DVD. I am not sure about his. Here I post my story for help. The details:
1. The OS X Server installation DVD (which came with the mini) was put in a 13" 2009 Macbook Pro. There I ran the Remote Install OS X application. Selected the Installation DVD.
2. Then I started the Mac mini server, holding the down Opt key. The Installation DVD appeared from my local network. However when I selected the DVD and clicked the arrow sign under it, things went wrong. A circle with a line segment appeared briefly (indicating a problem, I think). Then the mini simply went to boot from its own hard drive where the original OS X was.
Help and suggestions are very much appreciated.
Additional information:
Remote Disc works fine. From my Mac mini, after booting into the original OS, I can see and open DVDs in the Macbook Pro.

Target disk mode method works fine. I can boot my mac mini from its installation DVD placed in my macbook pro, connected to the mini through firewire. So I don't think there is any hardware problem.
I played with a few other things. First I used another DVD, this time the one that came with my 2009 macbook pro, a non-server version OS X. When I tried to remote install it to my mini, the mini can still see the DVD but it hung after I chose to boot from it. It just showed a big circle with a line segment. It did not revert to boot the OS on its own hard drive.
Next I again ran remote install on macbook, but booted the mini to its own hard drive. From there
I changed its start up disk to Network Startup, and rebooted. The mini can find nothing on the local network.

Mac Mini Server freezing in install when choosing PPPoE

Similar Messages

Maybe you are looking for