Mac mini server (mid 2011) hard drive support

Does anyone know what is the max size HDD supported in this model? 2TB 2.5" drives are more affordable recently, I think it's time to upgrade the 750GB drives but can't find what the max supported size is. Thanks!

It will support 2 TB notebook sized drives. Larger external drives can be used.

Similar Messages

Mac mini server Mid 2011 Maverick upgrade problem

Help needed I have a mac mini server mid 2011
2x500gb hard drives
Hard Drive one is Macintosh HD
Hard Drive Two is Server HD
I upgraded to mavericks osx onto drive one Macintosh HD
I went to upgrade os x server for mavericks and it went to install on hard drive one Macintosh HD not the Server HD
So I formated both drives which partition map scheme is GUID Partition Table on both drives.
I done a new Install of Mavericks on drive one Macintosh HD that works fine
I downloaded OS X Server again and it is installing on hard drive one Macintosh HD and not Server HD
and it will not give me an option to Install on the Server HD.
I have also looked in the system preferances Startup disk and now I have a question mark showing.
When I open it it only shows Macintosh HD and NOT the Server HD
Can someone please advise
I'm not bad on computers but this has stuped me.
Iif anyone can help please can you explain in easy terms if there is any.
Thank you

Server.app will install on the same disk OS X resides on.
What I think you are seeking here is to have the server data on the other disk, and that is configured via Server.app, once you have Server.app installed. Launch Server.app and select the server name at the top of the left column and then go to the Settings on the right side, and select where you want the service data there.

27' Cinema Display Connected to Mac Mini Server Mid 2011

Hi all, i currently have my mac mini server Mid 2011 hooked up to my 27' inch apple cinema display and it flickers once a while.

Problem seems to have being solved after mem upgrade to 16GB from original 4GB.

Mac Mini Server (mid 2011): after erasing both drives, do I need to reinstall OS X on both drives or just one?

After purchasing a new mac mini, I am selling the mid 2011 server. I am not sure if I need to reinstall Yosemite on both hard drives (I have erased both drives). I assume I need to but I thought I read that I don't and have not been able to find that article again. The manuals available are only for the earlier mac mini server or my year, mid 2011, the "regular" mac mini.

You should NOT install Yosemite on your 2011 model. That model DID NOT come preinstalled with OS X Yosemite. If you do you're using YOUR Apple ID not the buyer's.
Before you sell your 2011 Mac Mini you need to install the original OS that the Mac shipped with. If it came preinstalled with OS X Lion or Mountain Lion, you can use Internet Recovery (Command+Option+R) which will boot into Apple's servers and verify the Mac and allow it's preinstalled OS to be reinstalled. Here is a link that should help you prepare it for resale.

Clean install Mountain Lion on Mac mini Server (Mid 2011)

Hi.
I am trying to do a clean install of ML on a Mac Mini Server. This is just a test machine, so not interested in any backups, etc.
The machine is a Mid 2011 Mac Mini, and had Lion Server on it to start with (has been re-installed, reimaged, etc multiple times in it's short life with me so far ..)
I would like to set the internal disks up as a Software Raid 1 config.
I have a successfully created and tested USB stick with OS X ML install on it. I boot the mini with the USB stick, and once the installer options are available, I use the disk utility to create my software raid 1 config. Once this is completed, I proceed with the rest of the install.
Before I can go any further, I am warned that the installer will NOT be able to create a recovery partition, and use time machine backups on this drive.
If I break the raid and install on either one of the drives, the install proceeds without any problems.
Is there a method I can use to do a clean install on this machine with the drives configured as RAID 1?

This is the message that would happen with Lion, see this: http://support.apple.com/kb/HT4649
Basically when you setup a Raid 0/1, the Lion and Mt. Lion installer won't/can't create a recovery partition.
When you boot from a recovery partition you have access to certain tools, e.g. Disk Utility to restore a Time Machine back up, redownload the OS, etc.
The recovery partition provides a certain bit of convenience but isn't absolutely necessary to run the OS. When you see the message, doesn't it let you go ahead with the install, accepting that no recovery partition will be created?
If you need some of the recovery partition tools, you have a bootable USB stick as well as a backup of the Mt. Lion installer, no?

New Mac Mini Server (Mid 2011) + 12TB Storage = ?

So the goal is kind of simple...I just bought a Mac Mini Server (+ 4GB Ram upgrade to total 8GB) with Lion of course to faciliate a fairly basic concept. The Mac Mini Server will be running all the time and will be the central storage point for all data/apps/etc including serving my Apple TV (2nd Gen) via iTunes. I have 4 x 3TB drives and/or 2 x 2TB drives that I'd like to RAID 0 (or JBOD/Concatenate if necessary) to show up as 1 uber drive for storage in which the mini can access whenever. The thing is that obviously there is only so much disk space available in the mini itself, and outside of that you're looking at either USB 2.0, Firewire, or Thunderbolt as a connection interface to external media. USB 2 is fairly slow, firewire kind of ***** and has limited devices available, and Thunderbolt is retardly expensive (coming from the guy that just spent nearly $1000 on hard drives) not to mention nothing exists for that yet. There's always the option for gigabit ethernet which would work well if we were working with an NAS.
Here's the thing. Being that this is going to be one big uber drive, the first question is how to interface with it. I'm not opposed to Direct Attached Storage except the available connectors are fairly slow or not out there yet. I'm not opposed to NAS either as long as I have the *option* to hook it up locally (perhaps via USB, is that possible?). The bigger issue here is that RAID 0, JBOD, or concatenated is all quite volitile which is just a downside of my needing to have no more than 1 uber drive. So my thought was to back it up with an online service, likely with one that offers unlimited backup like Carbonite and Live Drive. The issue with Carbonite is that it doesn't support anything that isn't a local internal drive (no NAS or DAS). Live Drive's software isn't yet working properly with OS X but does support NAS on paper.
Does anyone have any thoughts any way around any of this? I'm not too sure how to word it more clearly. My latest thought prior to LiveDrive screwing me over software-wise was to grab an 8bay NAS and activate the NAS aspect of LiveDrive which would pretty much solve my problem after paying $160/yr. Again though, this no longer works as they've pretty much shat on the OS X client. I also tried running a virtual machine with Win 7 via Parallels 6 but it wasn't able to view the NAS at all. I don't exactly want to buy an identical box with identical drives either because that's well over another $1000 so something a bit more creative or practical would be nice.
Again in the end, I just need Mac Mini Server OS X Lion to have one (wishful) "internal" 12TB drive (realistically NAS or DAS) that I can have a back up of the whole 12TB over some reasonable speed interface (assuming gigabit ethernet is the way to go).

sounds like you need a DROBO. If all you're doing is serving up audio and video, a USB 2.0 connection is fine. It sounds like you're looking for two different things...local storage and an online backup service. Or, are you talking about uploading all your content somewhere and streaming it down to your mini? If it's #2, then that's going to be way slower than connecting a USB device.
For online backups, I use Crashplan, which is better than Mozy and Carbonite (both of which I've used for at least a year), IMO.

Mac Mini Server Mid 2011 i7 problems

I have a Mac Mini Server with an i7 Mid 2011 that had a lot of issues with memory because we were running so many services with 4GB of memory and would have 4 pages of usage in activity monitor after the 4GB of memory was full. It wouldn't restart on us or crash when running just really slow down due to usage of RAM. We just bought new RAM to bring it up to 8GB (2 x 4GB). It's the right memory for the computer. And now Lion crashes and restarts on us and even becomes way unresponsive too. Is there a way to check RAM to make sure it isn't bad without install a program. I recall someone once saying you could hold some buttons down at start up to do a RAM check.

I think verbose mode runs a simple check,
Starting up in single-user or verbose mode
1. Shut down your Mac if it is on.
2. Press the power button to start the computer.
3. Immediately press and hold the Command (Apple) key and
one
of the following:
the "s" key for single-user mode. (Command-S)
the "v" key for verbose mode. (Command-V)

Removing OSX Lion Server from Mac Mini Server (Mid 2011)

Hello, fellow apple fanboys!
I was wondering if anybody knew the sollution to my problem. I have recently purchased the Mac Mini Server, the mid 2011 model, and I wanted to replace the server edition of Lion with the standard one. However, when I plug in my lion installation thumbdrive the system just displays a stop sign, meaning that I cannot boot from it. I was wondering if I could just wipe the Server HD and reinstall standard Lion OS on it.

I have the 2011 Mini Server and all I did was just not enable
any server functions. It works just fine. Unlike previous
versions of OSX, the server is an add on to the OS and
not intertwined with the OS. So, my suggestion is don't
bother. Just isn't worth the time.
As to why the thumbdrive doesn't work, it is probably a version
that is older than what the Mini was shipped with. This is not
anything new as this is the way OSX has always been.

Mac mini server mid 2011 lion mouse pointer disappears after sleep

Hi,
I bought a mid 2011 mac mini server (quad core) running OSX Lion (10.7.2), and I use it with the magic trackpad. Sometimes (not every time) when I wake the computer from sleep (I let it sleep via the menu at night), the mouse pointer is not visible. I can use the trackpad, and move the mouse and click, only I cannot see where I click because the mouse pointer is not visible.
The batteries in the trackpad are OK.
When I plug in a USB mouse, I can move and click that too, but the mouse pointer is still invivible.
So it seems to be OSX related
The only thing that seems to help is to restart the system. After reboot the mouse is back as normal. Still this is very annoying as it makes sleep quite useless.
Anyone else suffering from this? Any solutions? Thanks.
Thanks,
Gino

I also have this issue intermittantly but fairly often.
But sometimes the cursor comes back but the screen stays black except where the cursor has moved across, revealing the screen, a bit like using the spraycan tool in MacPaint years ago.
And to top it off I have a problem with sleep making all the open apps try to quit, but one is always unable to, and it seems to lock everthing up until I wake up the mac, and then all the apps that were open do resume, but in the meantime any TV programs that should have recorded (by waking up mac to record) using my Elgato EyeTV have been missed ...

Mac Mini Server mid 2010 problems

I have a Mac Mini server mid 2010 model, running Mountain Lion server.
It reported a fault with the HDD in the lower drive bay some months ago, so I changed the disk. It still reports a fault with a new disk and the original disk works perfectly in a portable enclosure, so it cannot be a disk problem but something more serious.
I have now discovered that bank 1 ram slot has failed. I have two 2GB ram modules, and whichever way I insert them bank 1 claims to have no ram.
Are these two problems related, and what is the fix. I'm just hoping there is something simple and that I don't need to replace the logic board.

Run Apple Hardware Test to try and pin down where issue is.
However, it does sound like it is a logic board issue. These
days, since pretty much all the ICs on the board are BGA
(ball grid array), even the best electronics hobbyist can't
replace them.
I just did a quick Google of logic boards for 2010 Mini and
they are pretty pricey ($500-$600 range). If you have Applecare,
however, you should be covered.
At that price for logic boards, you may be better off looking for
someone selling a 2010 Mini and just replace yours.

Can I replace the optical drive on a 2010 mac mini with a second hard drive?

i was just wandering how easy it would be (if at all) to replace the optical drive on my 2010 Mac Mini with a second hard drive
we use it as a media server only, and the DVD is almost never used

http://eshop.macsales.com/shop/drive_bracket/datadoubler/

I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?

I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?
Because of the price I'm not interested in solid state drives, unless of course you want to send me $1,000.
I've already got external drives but I take my mini back and forth to work and don't want to carry those drives with me.
I'm not interested in buying a laptop. My mini works great so why waste $1,000 or more when I can buy a 1 to 3 TB hdd for under $300 and have exactly what I want. My late 2009 Mac Mini with a large hdd.
I went to Crucial's website and they can't tell me what drives fit my Mac Mini. That's where I got my ram (8GB). I'm ONLY interested in name brand quality HDDs.

The limiting factor in your 2009 mini is the max 9.5mm drive thickness.
One of the largest capacity 2.5" drives that meets this criteria is the HGST (formerly Hitachi) at 1.5GB
Any reputable SATA HDD you can find that is not thicker then this 9.5mm will work.

Mac mini as an external hard drive

Can I use a mac mini as an external hard drive? if i can how do I make the connection?

You would restart the mini while holding down the T key on the attached keyboard. This puts the mini into Firewire target mode. Assuming the mini is attached to a monitor, you will see a moving Firewire logo on the screen indicating the mini is in target mode.
From there, all you have to do is plug it into the FW port on a second computer and it will look just like a hard drive to the other computer.

How can I transfer pictures from my old Mac mini to an external hard drive?

HHow can I transfer pictures from my old Mac mini to an external hard drive? Thanks.

Normally you should be able to drag and drop them onto the drive, provided the drive is Mac formatted. Have you already tried that?
Matt

Installation of Mountain Lion Server (OS X Server) fails on Mac Mini Server (Mid 2010)

This is just a very short statement...
Is it really not possible to upgrade to OS X Server on a Mac Mini Server Mid 2010 which run Snow Leopard Server without any problems...????
Joke...???!!!!!!

Hi
I know you may know this but just in case you don't and for the benefit of others these are the tech specs for ML:
http://www.apple.com/osx/specs/
It seems as if your hardware does meet the requirements. However you've neglected to mention what error message (exactly) you see when trying to upgrade.
HTH?
Tony

Mac mini server (mid 2011) hard drive support

Similar Messages

Maybe you are looking for