Mac Mini Server: Wich drive bay is which disk number

Dear readers and admins
I need to know which drive bay does correspond to which disk number in the diskutil list command. I need that, as I made a software raid1 and if I get an error message after executing the command "diskutil appleRaid list" I need to know which physical drive bay (Upper/Lower) is disk0 or disk1.
Maybe someone can tell me this answer for a Mac Pro as well?
Thank you in advance for your feedback.
Kind regards
Thomas

Thomas,
In my Mini Server Disk0 is in the lower bay. Here is the attached "system Profile".
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HTS725050A9A362
Revision: PC4ACB1E
Serial Number: XXXXXXXXXXXXXXXXXXXX
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Lower
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD2:
Capacity: 499.76 GB (499,763,888,128 bytes)
Available: 441.4 GB (441,396,764,672 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Hope that Helps.
<Edited by Host>

Similar Messages

Using a Mac Mini Server quad Core i7 for FCPX ?

I am a student trying to
configure a final cut pro X edit system with a budget of around $4K.
I have over 400 hours of video (some Hi-8 but mostly mini-DV tapes).
For the Mini-DV tapes I plan on ingesting video into FCPX
directly from the camera via firewire DV. I will be using a Sony GV D800 to ingest
the Hi-8 tapes via firewire DV as well. I already have a 30" Apple Cinema Display.
H.264 will be used to deliver finished content to the web and/or Blu-ray.
I was leaning toward the macbook pro 17" but then I realised that a Mac Mini Server
could be configured with the same number of cores and RAM for less money.
Mac mini Server
2.0 GHz Quad Core Intel i7 -- same number of cores as macbook pro 17"
8 GB RAM
750 GB Serial ATA Drive 7200rpm + 256 GB Solid State Drive
Mini DisplayPort to Dual-Link DVI Adapter
Apple Magic Mouse + Magic Trackpad
Other Peripherals:
Promise Pegasus 8TB R4 Raid System in RAID 5 configuration or equivalent
Sonnet Echo Express PCIe 2.0 Thunderbolt Expansion Chassis with
Matrox Compress HD MAX encoding card
LaCie d2 Blu-ray 12x
Do the extra cores in the server make up for the difference in GPU?
(2.7 GHz Mini dual-core i7 with AMD Radeon HD 6630M graphics processor with 256MB of GDDR5 memory) VS (2.0 GHz Mini Server quad - core i7 with Intel HD Graphics 3000 processor and 384MB of DDR3 SDRAM shared with main memory)
Am I thinking about this configuration the right way? Is there
any overhead given that the mini will be a server? Anything missing?
thanks for your help,
Tom

Take it back for a replacement while you are within 14 days from purchase.

How to set up my mac mini server to use two drives seamlessly?

I have a mid 2010 mac mini server, with OSX Lion installed. It has dual 500gb hard drives.
I've been moving all my important files to it, and I've always assumed that once I filled one disc, it would seamlessly transfer over to the other and continue backing up. This does not seem to be the case.
I'm at roughly 495gb of data, and when I try to move a 10gb file onto my server, it tells me that I don't have enough disc space to continue the operation.
What can I do to make use of both drives?
-Thanks

It sounds like what you're asking for is to have the two drives in a RAID 0, where the two 500 Gb drives look like a single 1 Tb drive. I'm not sure the exact procedure for installing RAID 0 on a mini's internal drives, but the process would involve backing up, reconfiguring for RAID (which destroys all data,) restoring data from the backup, and more risk than I would personally find acceptable. I'd expect to lose a full day with the backup and restore steps. I can guarantee, there will be pain.
Instead, I'd suggest looking at what's consuming the 500Gb, and seeing if there are particular folders that can be moved. For example, a shared folder is pretty easy. Copy it over. In file sharing setup, edit the share to point to the new location. Make sure remote users disconnect, and reconnect to the "new" share. When you're happy there is no data loss, delete the old location.
User's home directories can also move, but the process has a few more steps, and depends on how the accounts are built (local vs. OD)
If the majority of the data is in a single "your backup files" folder, shared or otherwise, then I would just set up a second folder on the second drive and write to it, leaving the first alone. If it is truly a backup, then you could make the first folder read-only at this point for extra protection. If you go the 2 folder route, keep in mind your boot drive is operating with 1% free space, I like my drives to have at least 15% free, and OS drives more like 25% (you'll find some range in recommended %-free, but most will agree 1% is too little) so move SOME stuff to the new folder, before closing the old.

Is the mac mini server the same hardware as the other mac minis (except for the quad core i7 and dual hard drives) with different software or is it configured differently?

I have a mac mini with an i7 dual core processor. It is perceptably slower than my macbook pro with a quad core i7. Does the mac mini server have the same hardware configuation as the regular mac mini with server software or is the hardware different (aside from the i7 quad core and dual hard drives)? I want a mini with a quad core i7...

Your assumption is correct. The server does however only
have the Intel HD3000 graphics like the base model with
no option, at this time, for the discrete graphics chip. So,
depending on what you are using it for, that could be a deal
breaker. Remember that your MBP does have a discrete
graphics chip.
I have a 2011 Mini Server connected to a Thunderbolt display
that gets used as an engineering workstation and general
personal use (some photo editing, LP restoraton, general
internet browsing). You simply just not enable any of the
server services. I find the combination to work quite well
for my purposes. I also have a 13" 2.7 GHz i7 Macbook Pro
which is pretty much strictly for work. As far as CPU
power it is pretty much equivelent to your Mini. For the most
part I find the Mini does outperfom my MBP. I heavily use
Parallels and Windows7 virtual machines, so the more cores
the better.
So, If you do a lot of CPU intensive stuff that is multithreaded,
the Server may help. If it is graphics intensive and your software
heavily leaverages the GPU, you may actually take a hit on
performance.

Can I run 4 super drives with my Mac Mini Server

I have Lion Server downloaded to my Mac Mini (set up as a TV server) and would like to be able to access the 4 USB Super Drive ports via other Mac Mini's in other rooms, 2 Apple TV's if possibe through Apple TV software and maybe Macbook Pro via AirPlay. Are these things possible. The Mac Mini Server is the Best Home television distribution network. Cheaper hardware and fast internet connection based on devices. The above is my goal.
My individual questions...
Can I place 4 Super Drives in the 4 USB slots and run them?
What is the most effiecent way to be able to server those drives on ONLY my Apple Network (other Mac Mini and 2 Apple TV's)
Can I access multiple drives at once from different devices on my Apple Network?
Can I restrict access to teen and child users based on the TV Rating displayed on DVD in Super Drive? (ex: iTunes recognizes CD's by times of songs and digital fingerprint when I input my Store bought CD or adds it to the Database if its a new title.)
These would help so much!
Thanks,
Stefan
Have any questions on how to turn your Mac into a home Multimedia System, ask.

no
a dvd drive can never be shared over a network in order to play the dvd drives content
the dvd encryption makes this imposible
you have to rip (which is illegal) each dvd disc to a computer in order to do what you wish to do
and it's not an apple thing it's the case no matter which computer you own

Mac mini server: Hardware test error on Hard Drive

Mac mini server: Hardware test error on Hard Drive
'checking for slow read failures': ERROR - Target device access failure - Test failed.
CAN I ACCESS HD (which is our data server) EVER AGAIN? IF SO, HOW?
Meanwhile we wonder if this is really a hardware error. It all happened during writing a time machine backup.
Probably while writing it, some data was relocated by accident, but we can not 100%-sure remember the sequence of actions :/
This is our trauma history:
- time machine got increasingly slower in writing a backup
- we quit the backup
- we switched off the mac mini (on power button)
- we switched on the mac mini
- we stopped time machine to the rules
- we shut down mac mini via command
- we booted the mac mini in save mode
- we see a loading bar
- no progress after 10th of loading bar
- switched off (power button)
- when we now switch on the loading bar below the apple-logo is all we see + the little wheel
- we started with cmd+alt+p+r pressed
- mac mini restarted but showed the loading bar scenario without progress again
- we started with 'd' pressed and did the hardware test (see above)
- we started with 'alt' pressed but it does not give us the recoverydrive to run the last backup
ANY IDEAS?
IS IT A SOFTWARE- OR HARDWARE ERROR?
THX IN ADVANCE!

BDAqua wrote:
I thnk Intenal 2.5" Drives for servers is silly, & Ithink the Minis & iMacs re poorly cooled.
I'd get Temprature Monitor & see what temps they're running.
Is Temperature Monitor an app or a device? If it's a temperature problem then that is essentially a design problem. Two drive failures in the same Mac mini server in four months combined with the fact that they're not really user serviceable already has me 90% on the way back to more pragmatically designed Linux servers. I think it would be foolish to waste any more money on these minis for my business hosting.

Primary drive on a Mac Mini server ?

Hi all: When I first picked up my 2011 mac mini server I immediately reformatted the drives and created a Riad 1 array. After a while, I decided to go back to a two disk arrangement. Since then my mini have worked OK but sometimes drops connections to client machines (all OS X ML) and generally seems a bit slow. When I did the second moved back to a two drive setup, I did not know which drive should be the primary OR if it even mattered. So that is my question: Does it matter which drive is primary? and if so, how do I identify the primary?
Thanks a bunch, Chris.

moseman wrote:
When I killed the RAID I reformatted both drives and started from scratch. It was at this point that I was faced with picking one drive to hold the OS. I did not know which drive to use, or if it even made a difference.
As I mentioned, immediately after spliting the RAID both drives will be 100% identical so it would not matter which you made the OS one. There would be no difference in content or performance (assuming they are the same model drive).
As soon as you start using one of the split drives you would then be making changes compared to the other.

Mac Mini server 2010 (no modifications) Panics & Drive issues

Hey guys,
I've been having some issues with a 2010 Mini server (stock 4gb with no modifications) It's crashing at least daily, sometimes greyscreen panics, sometimes retaining mouse input, but nothing responding that requires disk use. (You can move windows around etc but not load anything that isn't already visible or interact with finder)
I've had issues with one of the hard drives before with it disappearing from disk utility (even booted into command line) , and system profiler giving a "There was an error while scanning for Serial-ATA devices" error.
I've had it in at the genius bar before, they found nothing wrong and had the drives mount fine. I had put it down to a lose connection as the guy said he had reseated the drives and had no problems.
Anyway, like I said its been crashing pretty much daily so I decided to bite the bullet and erase & reinstall the OS, and that led me to new error logs to work with!
What do you think? I should also note it was installed from a usb superdrive (the ones which came out with the Macbook Air's)
error log file: http://d.pr/xYok

I had been running my Mac Mini Server with both drives striped as RAID 0 up until a few weeks ago. In the middle of the night the Mac Mini Server rebooted and when I tried to login the next morning, it never finished. I booted from my backup clone drive and ran Disk First Aid on the RAID volume and it reported that my only choice was to reformat. Since it's kind of risky to be running a striped array anyway, I chose to reformat as individual drives.
After rearranging everything so the data would fit on the two volumes, I started having some problems with my media drive that I use for video editing. Disk First Aid didn't report any serious problems, but I downloaded SMART Utility and it reported the drive is FAILING. So, I have lost all confidence in the second drive (lower) and have an SSD on order to set up as my boot volume as a replacement.
BTW, when I called Apple about this problem, they said I could take the Mac Mini Server into an Apple Store and it would take 3-5 days for them to evaluate it and repair, if necessary. Since the closest Apple Store is 65 miles away and I can't do without the server for that long, I'm eating the cost of the failed drive and I guess I'll just live with that. But it doesn't give me a lot of confidence in the other drive and this isn't the first problem I've had with this Mac Mini Server.
Dennis

Mac Mini Server (mid 2011): after erasing both drives, do I need to reinstall OS X on both drives or just one?

After purchasing a new mac mini, I am selling the mid 2011 server. I am not sure if I need to reinstall Yosemite on both hard drives (I have erased both drives). I assume I need to but I thought I read that I don't and have not been able to find that article again. The manuals available are only for the earlier mac mini server or my year, mid 2011, the "regular" mac mini.

You should NOT install Yosemite on your 2011 model. That model DID NOT come preinstalled with OS X Yosemite. If you do you're using YOUR Apple ID not the buyer's.
Before you sell your 2011 Mac Mini you need to install the original OS that the Mac shipped with. If it came preinstalled with OS X Lion or Mountain Lion, you can use Internet Recovery (Command+Option+R) which will boot into Apple's servers and verify the Mac and allow it's preinstalled OS to be reinstalled. Here is a link that should help you prepare it for resale.

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

Posted in error.

Mac Mini Server Drive Configuration

When ordering a Mac Mini Server, under hard drive selections the fourth option down is Two 750GB 7200 drives and a 256GB SSD It lists it as 2x750GB + 256 SSD. This indicates to me that you are getting the server with three drives, Two SATA 750GB and one SSD 256GB. I was under the impression that the Mini would only hold two hard drives? I opened two different Chat sessions with Apple and also made a call to sales and they all assured me that this is correct. Can anyone offer any insight? I would like to make sure before I order.

Another discussion on same topic https://discussions.apple.com/message/16024311#16024311
Seems like the Mini Server has more space in it so it can hold the three drives.
But haven't myself seen one in real life so I can't compare.
Stefan

What is "best practice" to set up and configure a Mac Mini server with dual 1 TB drives, using RAID 1?

I have been handed a new, out of the box, Mac Mini server. Has two 1 TB drives in it. Contractor suggested RAID 1 for the set up. I have done some research
and found out that in creating the software RAID, this takes away the recovery partition, so I have been reading up on how to create a recovery "disk" using a thumb drive. this part of the operation I am comfortable with, but there are other issues/concerns that I have.
Basically, what is the "best practice" to setup the Mini, configure the RAID and then start the server. I am assuming the steps would be something like this:
1) start up the Mini and run through the normal Maverick setup/config - keep it plain and vanilla
2) grab a copy of the Server app and store it offline in a safe place
3) perform the RAID configuration / reinstall of OS X Maverick using the recovery tools
4) copy down and start the server app
This might be considered a very simplified version of this article (http://support.apple.com/kb/HT4886 - Mac mini server (Late 2012 and Mid 2011): How to install OS X Server on a software RAID volume), with the biggest difference being I grab a copy of the Server App off of the mini before I reinstall, since I did not purchase it from the App store, but rather it came with the mini.
Is there a best practice / how-to tutorial somewhere that I can follow/learn from? Am I on the right track or headed for a train wreck?
thanks in advance

I think this article will answer your question. Hope this helps: http://wisebyte.blogspot.com/2014/01/best-configuration-for-mac-mini-server.html

One Drive on Mac Mini Server not indexing - no spotlight or finder results

I have two drives on my Mac mini server. No RAID, etc. They are factory config 500G each.
The "main" drive has all the applications, desktop, etc on it and indexes fine, I can search or spotlight with no problem.
Anything on the other disk works fine, but is not searchable. Is there a setting that I have turned off search on that other drive? Is there a way to force a re-index, etc.

Look in System Preferences > Spotlight > privacy tab > See if the drive is listed in the exclusion list. If so highlight and press the "-" icon below the list to allow indexing. It will start immediately after you remove it from this list.
Regards,
Captfred

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition.

New Mac Mini Server, two Hard drives, Can I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

New Mac Mini Server, has two Hard drives, could I install an older Mac OS on the second drive and switch start up disks to run PowerPc applications?

I haven't purchased a Mac Mini at this time and I may not if I can't use it as a non server. I need to update my system I would be better off buying a new Mac with Snow Leopard the last app that will run Rosetta. The Mac Mini Server has a quad 2.0 processor and 4 GB RAM and two internal hard drives and should out perform my dual 1.25 G4. I can run PPC apps on my G4 but it is 8+ years old and seems to be getting noisy. I don't want to tie myself to another old machine. I want a machine that will work with Intel Apps I was hoping that the two hard drives would allow me to boot from the second with Snow Leopard and use Lion on the first drive to be able to keep up to date with all my other universal apps and Mac OS up grades. The application I use the most is my CanvasX app with drawing & vector effects, text & typography, sprite technology, painting, image editing, and multimedia tools are all in this one app but will not be updated to run Intel apps. I am frozen in time because my most valuable Application won't be updated and Apple has cut me off by not supporting PPC in Lion and onward; Apple used to backward support but I guess that they are no longer as user friendly and concerned with a happy user. I have always been a loyal Mac user and I will not migrate to Windows under any circumstance; I hate windows!
Thanks for your prompt response,
Dick Deaton

Mac Mini Server: Wich drive bay is which disk number

Similar Messages

Maybe you are looking for