Mac Mini server won't boot after logoff, any suggestions?

My mac Mini Server will not boot after administrator logoff, I get a gray screen with the spinning progress wheel, but nothing happens. Any suggestions?

Can you boot into single user mode? If so, run fsck and post the results.

Similar Messages

Mac mini server won't load after creating RAID0

After creating a RAID0 stripe set and tried to re-install Lion server back on my new Mac mini server, it failed at the end of the installation asking me to try to run the installation again, I tried three times with the same result. So I tried to boot from a USB Lion image but it won't recognize it, I even tried to boot from a USB Snow Leopard image and it won't recognize it either. What else can I try to bring my Mac mini server back.

Have a look at this thread guys, it should help sort out your problems.

Mini server won't boot after reinstall.

I had to reinstall Snow Leopard Server on my Mac Mini Server. I did it via a firewire connection to my MBP. Everything runs fine when I boot in target disk mode from my MBP. Problem is when I disconnect the MBP and boot just mini it gives me an error message that says I need to restart the computer. I have the two 500gb drives on the mini configured in a raid array.
What am I doing wrong?
Thanks,
Josh

BDAqua wrote:
What the heck does a Mini Server come with for Install media anyway???
Where's the BDAqua SOP (standard operating procedure): which Mac Mini Server are we talking about? 2010 or 2011?
Did the mini ship with Snow Leopard? or is it a current 2011 model that shipped with Lion Server?
Did it always have that RAID array or was it something that you set up during the current reinstall?
I only have experience with the current 2011 Mini Server that comes with Lion Server. With that one, the included physical install media is exactly as you find with the current computers that ship with Lion pre-installed: none, none, and none. You boot from a recovery partition (be it on the internal) or on a USB key, and you download a 4+ GB folder that includes Lion + Server stuff. It's a slightly different "server bundle" from Lion client because the setup wizard after the install is specific to server.
(That's why I have no experience with the Lion Server app store two-step: purchase & install Lion client, then purchase & install (additional) Lion Server sw. My install is single, and I have only a single specific server setup wizard.)
If you save that folder, you can use it again from another computer to install back on the Mini Server put in FW target disk mode; I've done that from my MBP 13" (early 2011) and the resulting install of Lion Server on the Mini Server has always worked.

Mac Mini server won't boot.

Our server is on, but when we try to access it via its screen it excepts password but returns to login page. Any ideas?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

Mac Mini "server" won't boot Clonezilla CD

Has anyone gotten the Clonezilla Live 1.2.3-27 or alternative 20100121-karmic CDs to boot on this dual-drive box? Mine shows this...
ISOLINUX 3.84 2009-12-18 ETCD
pauses for about a minute, then ends with
ISOLINUX 3.84 2009-12-18 ETCDisolinux: Disk error 01, AX = 425B, drive 90
Boot failed: press a key to retry...
The CDs boot just fine on my Mac Pro. Thanks.

Greetings Richard, I ran into a similar situation recently with my mini server. although I believe it to be a problem of my DNS settings getting hosed. I couldn’t log in no matter what log I used-even as the root user.
I had a back up on the second drive of the mini. I did buy the USB drive when I bought the mini, so I was able to boot off the install disc. Then from the menu I choose the back up partion as the start up drive. After restarting, I was at least able to recover and copy my important files to the back up partition. I have not been able to work out the login issue yet. I’ll probably just do a reinstall on the corrupted drive.
In any event, it maybe worth it for you to buy the USB drive and boot off of it.
The verbose mode is for you to be able to login through the command line and trouble shoot from there.
Also, in safe mode, any files that you may want to change permissions, you may need to change the owner and then change the permissions. This is done with the chown command and then chmod command. You’ll need to use the sudo command so you can become the root user to use the commands and make any changes.
Hope this will at least help you get further in troubleshooting this issue.
Bill B

Mac Mini Server won't go to sleep!

Like a naughty child, my Mac Mini server (i7 2Ghz, OS X 10.7.3) won't go to sleep. I use it as a personal computer, not a server, and I like to put it to sleep at night. But about 20 seconds after going to sleep, it wakes up again.
I've shut off all the server functions I can think of, and it's still waking up. Is there any way to determine WHAT is waking it up when I put it to sleep?
Thanks.
David

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
syslog -k Sender kernel -k Message Req Wake
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
Important: The name of your computer will appear in the output. If that information is private (for example, if the computer name contains your own name), edit it out by search-and-replace in a text editor before posting.

New mac mini server won't start up

Hi I've had the new Mac mini server for 2 day now and it was workinf fine untill I tried to restart it. When I turn it on I just get the apple logo and the gray processing wheel.
I've have used disc utility to check the disc. But that did nothing.
It is picking up the startup disc fine.
Is there anything I can do or will I need to re-install.
Any help would be appreciated.
thanks

Greetings Richard, I ran into a similar situation recently with my mini server. although I believe it to be a problem of my DNS settings getting hosed. I couldn’t log in no matter what log I used-even as the root user.
I had a back up on the second drive of the mini. I did buy the USB drive when I bought the mini, so I was able to boot off the install disc. Then from the menu I choose the back up partion as the start up drive. After restarting, I was at least able to recover and copy my important files to the back up partition. I have not been able to work out the login issue yet. I’ll probably just do a reinstall on the corrupted drive.
In any event, it maybe worth it for you to buy the USB drive and boot off of it.
The verbose mode is for you to be able to login through the command line and trouble shoot from there.
Also, in safe mode, any files that you may want to change permissions, you may need to change the owner and then change the permissions. This is done with the chown command and then chmod command. You’ll need to use the sudo command so you can become the root user to use the commands and make any changes.
Hope this will at least help you get further in troubleshooting this issue.
Bill B

Mac mini server has no boot camp so...???

Hi/___sbsstatic___/migration-images/migration-img-not-avail.png
I bought the mac mini server and super drive thinking I got the most storage in one box. But bought to run windows 7, and server version does not have boot camp. Someone suggested I get the regular version of OS, not server, but it won't let me install it, i think because it's already older version than one installed. And when rebooting to install, it just hangs. Maybe because it's installing off the usb superdrive? Also thought maybe I could find boot camp on that disc to run, via usb super drive, but I have no idea where or how to look. I want to keep mac os on, but need windows for work apps. I am from "windows" world, so I'm sure there is a way to do it that I'm missing. Thanks for any kind assistance
Greg

You might want to take a look at the open source rEFIt boot loader:
http://refit.sourceforge.net/
You may be able to use it to set up a dual boot Windows/ OS X system, but you could have driver issues without the Boot Camp files.

Mac Mini Server won't load Profile Manager

My Mac Mini Server has stopped loading Profile Manager in a web browser, and gives me the following message:
Caught exception "Connection to DB failed" [CSDatabaseError] executing route /auth/?redirect=https://stormforce.no-ip.biz/devicemanagement/api/authentication/callback:
0 CoreFoundation 0x00007fff8f42d25c __exceptionPreprocess + 172
1 libobjc.A.dylib 0x00007fff8f5b5e75 objc_exception_throw + 43
2 CSService 0x0000000101f549bd -[CSConnectionPool openConnection] + 3309
3 CSService 0x0000000101f5538a -[CSConnectionPool currentConnection] + 98
4 CSService 0x0000000101fe313c -[CSAuthService _sessionForField:value:] + 96
5 CSService 0x0000000101fd4bff +[CSHTTPRouteHelper setCurrentSessionForRequest:] + 150
6 CSService 0x0000000101fdec09 __21-[CSAuthService init]_block_invoke + 367
7 CSService 0x0000000101fd081a __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke + 95
8 CSService 0x0000000101fd3d6c -[CSHTTPBackgroundResponse bounce:] + 286
9 Foundation 0x00007fff8fa0e76b __NSThread__main__ + 1318
10 libsystem_pthread.dylib 0x00007fff8d749899 _pthread_body + 138
11 libsystem_pthread.dylib 0x00007fff8d74972a _pthread_struct_init + 0
12 libsystem_pthread.dylib 0x00007fff8d74dfc9 thread_start + 13
Anyone got any ideas how I fix this? My current plan is to try and re-install server.app, but I thought I'd post this to see if anyone had any ideas.

I'm still trying to trace this fault - if anyone has any ideas they'd be much appreciated.

2010 mac mini server won't sleep

Hi ,
I have seen some people report that there mac mini server running Snow Leopard will not sleep .
I have had this issue for a while and have now installed an App called ' PleaseSleep ' . All seems good and my Mac now goes to sleep so I thought I would let you all know
Best
AMS

I was doing some consulting for a client who had Snow Leopard Server on a Mac Mini 2010. By nature a server is not supposed to go to sleep. They wanted the same functionality, which I ended up scripting but looks like PleaseSleep is a better option.
I've searched and saw a lot of people complain about this. Most ended up getting Snow leopard instead of Server which solved their problems. Good find!

Too bad mini server won't boot from an external drive

It won't. Enterprise TEch support confirmed this. I bought thew new mini server to get a good value fast machine with a quad i-7.
What's the purpose of Thuderbolt if my apps and doc folders have to reside on a SATA disk?
They really should have non server version with the i7 quad.
Even better Apple should make it clear that this is the case. Even the guy in the apple store said I coud boot it form an external drive!

Yes this will all take some time for sure.
If you want to keep lion server on your current machine, then yes, that is correct. It doesnt hurt to have a few spare 500gb+ hard drives to help the long process.
See there was previous controversy with the mac mini servers with the dual cores (the one I have) because we all wanted the better processors but to not run the server version and some also wanted to be able boot from other drives. Same as you..
In non lion versions of OSX you would normally put the SL Server DVD or SL DVD into your mac and instead of installing a fresh OS, you would select utilities , then restore from time machine backup. You could also obviously use an external drive or SD card with SL or SL server installer loaded on it to install the OS or perform the restore.
That being said
I personally only know how to use a Snow leopard Server or Regular snow leopard installer DVD (or disc imaged external hard drive partition as just mentioned) to use time machine to restore an OS. I personally dont have experience with the lion disc repair for using its utilities to restore from a backup. Im sure it works the same way though when you hold option and boot from it..
If you are looking to go NON server on your OS you must have a Snow leopard retail version DVD (not leopard upgrade version) to be installed on to an external drive.
So what you would do is Set up a partitioned external hard drive and load it up with Snow leopard, upgrade it in app store to lion ($29 ) , then update it with software update, back it up to another partition using time machine, then boot from the install dvd (or disc imaged partitioned installer of SL) , go to utilities, and select restore from backup, when its asks wher eto install choose the external you want to boot from (must be partitioned using GUID partition table) and install. When you want to boot from that drive, hold option right after you power up your machine until it gives you the option of the drive you want to boot from, select it and boot.
Unfortunately like I said you will have to have a snow leopard retail installer (no longer at the apple store only online or ebay for $30) and then would have to 'upgrade' to lion in order to NOT have lion server version on a mac mini set up for server.
If lion server version is good for you then yes do what you wrote in the reply would work. My experience with server snow leopard was that it was slower than snow leopard regular and it extremely interfered with my music production even though I was not running any of its server options..
I hope this helps..

Mac Mini G4 won't boot; fan full blast . . .

Hello!
I was using my G4 Mac Mini when it decided to re-boot itself, and on start-up, all I heard is 1 loud whrrring sound from the fan, a short pause, followed by continuous whrring sound from the fan going at full blast (very loud!). The screen shows nothing.
I've tried the troubleshooting steps in the Apple site but nothing seems to work. Each time I start it up, it does the same thing.
A few months back I'd the unit repair under warranty by Apple (replaced logic board). So it's quite frustrating to have it down again - and now it's out of warranty.
Any ideas?
Thanks.
Mac Mini G4 Mac OS X (10.4.8)
Mac Mini G4 Mac OS X (10.4.8)

It's perhaps telling that the problem occurred after the system forced a reboot. That tends to suggest there's a significant fault - likely hardware, since if the issue was with MacOS it would not be likely to cause the fan to ramp up to full speed on startup with the screen showing nothing.
You mention that you've tried troubleshooting steps, though not which ones. Likely, given that it features in G4 mini troubleshooting of startup issues, that would have included a PMU reset, but if you haven't yet tried that, do so. I would not hold out much hope that it will assist in this situation, but the power manager is the only hardware component that could cause this sort of potential issue, and the only one that can be reset by the user.
Assuming a PMU reset doesn't help at all, and since the system doesn't show any display, it's not worth trying to boot from the original install disk to run the hardware test since the system isn't even managing the power on self test, thus won't move on to loading MacOS. At that point, I'd say you should take the mini to an Apple store if you have one in your location, or to an Apple authorized service provider for them to give you an idea of what is wrong and what it would likely cost to repair it.
If you don't want to do that, the only option is to open the system and examine it yourself. The problem with that, however, is that there really aren't any user-servicable parts inside so other than checking that everything is correctly connected and properly seated, there's really not much else you can do.

Mac Mini (PPC) won't boot off install DVD

I'm having a major issue with my 1.24GHZ G4 Mac Mini. What I want to do is reformat the HD and reinstall OSX. But for some bizarre reason the machine refuses to boot off any OSX install DVD I throw at. I've tried Jaguar and Panther as well. If I hold down the C key during reboot and wait for the Apple logo to come up, I get that but it goes no farther. I can hear the drive being accessed (and I know it's not fault because it works fine under OSX) and yet I end up getting stuck at that logo screen. I can reboot the system normally into OSX Tiger.
I also strangely cannot partition the hard drive from within Disk Utility.
Can anyone give advice?

Possible options/questions...
a) Have you tried using the original Install DVD that came with it?
b) Have you tried booting into Single user mode and checked the drive? (Hold down Apple-S until it boots into text mode and when you finally get the prompt type 'fsck -fy' without the quotes).
c) Also, you may wish to try resetting the PRAM immediately before booting from CD. Let it reset THREE times (hold down Apple-Option-P-R or WinKey-Alt-P-R until it has chimed 4 times) and then hold down the C key to boot from your Install DVD.

Mac Pro 2010 Won't boot after adding Ram

Just got my Mac Pro 2.8 a few days ago. My 4x2 8Gig Crucial Ram upgrade arrived today along with my SIIG FireWire400 PCIe card. It seems as though the Mac Pro won't boot with both the Crucial Ram and the Samsung Ram that came stock with the Mac Pro. I kept 2 of the 1 gig Samsung chips and put in the 2 4Gig Chips from Crucial. They are all the DDR3 1066 240 pin chips. I've moved the 4Gig chips to slots 1 & 2 and I've tried them in slots 3 & 4. I've moved the 1Gig Samsung chips accordingly. The power light on the Mac Pro blinks continuously when they are both installed. I even tried removing the new SIIG FireWire 400 card but that doesn't change anything. It seems as though combining these two types of ram just doesn't jive. Any ideas? I'm dragging the tower from queens to SoHo tomorrow to let the Apple Genius gang have a look at it.

FYI, when I did install the Registered or "buffered" 8 Gigs of Crucial Ram by themselves the system did boot up normally and a memory notification popped up and said that my ram was in the "correct" or "suggested" configuration. I can't remember the exact phrasing but the OS definitely gave me a thumbs up. So now I am trolling the web trying to find out if the Registered memory is ok. I'm fine to just have 8gigs for now. But don't want to jeopardize the stability of my system. So, Is it ok to use Registered memory and if it is, am I using a lesser quality of ram in doing so?

Mac Mini server won't boot after logoff, any suggestions?

Similar Messages

Maybe you are looking for