Mac Mini Server won't go to sleep!

Like a naughty child, my Mac Mini server (i7 2Ghz, OS X 10.7.3) won't go to sleep. I use it as a personal computer, not a server, and I like to put it to sleep at night. But about 20 seconds after going to sleep, it wakes up again.
I've shut off all the server functions I can think of, and it's still waking up. Is there any way to determine WHAT is waking it up when I put it to sleep?
Thanks.
David

Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
syslog -k Sender kernel -k Message Req Wake
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
Important: The name of your computer will appear in the output. If that information is private (for example, if the computer name contains your own name), edit it out by search-and-replace in a text editor before posting.

Similar Messages

2010 mac mini server won't sleep

Hi ,
I have seen some people report that there mac mini server running Snow Leopard will not sleep .
I have had this issue for a while and have now installed an App called ' PleaseSleep ' . All seems good and my Mac now goes to sleep so I thought I would let you all know
Best
AMS

I was doing some consulting for a client who had Snow Leopard Server on a Mac Mini 2010. By nature a server is not supposed to go to sleep. They wanted the same functionality, which I ended up scripting but looks like PleaseSleep is a better option.
I've searched and saw a lot of people complain about this. Most ended up getting Snow leopard instead of Server which solved their problems. Good find!

Mac mini server won't load after creating RAID0

After creating a RAID0 stripe set and tried to re-install Lion server back on my new Mac mini server, it failed at the end of the installation asking me to try to run the installation again, I tried three times with the same result. So I tried to boot from a USB Lion image but it won't recognize it, I even tried to boot from a USB Snow Leopard image and it won't recognize it either. What else can I try to bring my Mac mini server back.

Have a look at this thread guys, it should help sort out your problems.

Mac Mini Server won't load Profile Manager

My Mac Mini Server has stopped loading Profile Manager in a web browser, and gives me the following message:
Caught exception "Connection to DB failed" [CSDatabaseError] executing route /auth/?redirect=https://stormforce.no-ip.biz/devicemanagement/api/authentication/callback:
0 CoreFoundation 0x00007fff8f42d25c __exceptionPreprocess + 172
1 libobjc.A.dylib 0x00007fff8f5b5e75 objc_exception_throw + 43
2 CSService 0x0000000101f549bd -[CSConnectionPool openConnection] + 3309
3 CSService 0x0000000101f5538a -[CSConnectionPool currentConnection] + 98
4 CSService 0x0000000101fe313c -[CSAuthService _sessionForField:value:] + 96
5 CSService 0x0000000101fd4bff +[CSHTTPRouteHelper setCurrentSessionForRequest:] + 150
6 CSService 0x0000000101fdec09 __21-[CSAuthService init]_block_invoke + 367
7 CSService 0x0000000101fd081a __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke + 95
8 CSService 0x0000000101fd3d6c -[CSHTTPBackgroundResponse bounce:] + 286
9 Foundation 0x00007fff8fa0e76b __NSThread__main__ + 1318
10 libsystem_pthread.dylib 0x00007fff8d749899 _pthread_body + 138
11 libsystem_pthread.dylib 0x00007fff8d74972a _pthread_struct_init + 0
12 libsystem_pthread.dylib 0x00007fff8d74dfc9 thread_start + 13
Anyone got any ideas how I fix this? My current plan is to try and re-install server.app, but I thought I'd post this to see if anyone had any ideas.

I'm still trying to trace this fault - if anyone has any ideas they'd be much appreciated.

Mac Mini server won't boot after logoff, any suggestions?

My mac Mini Server will not boot after administrator logoff, I get a gray screen with the spinning progress wheel, but nothing happens. Any suggestions?

Can you boot into single user mode? If so, run fsck and post the results.

New mac mini server won't start up

Hi I've had the new Mac mini server for 2 day now and it was workinf fine untill I tried to restart it. When I turn it on I just get the apple logo and the gray processing wheel.
I've have used disc utility to check the disc. But that did nothing.
It is picking up the startup disc fine.
Is there anything I can do or will I need to re-install.
Any help would be appreciated.
thanks

Greetings Richard, I ran into a similar situation recently with my mini server. although I believe it to be a problem of my DNS settings getting hosed. I couldn’t log in no matter what log I used-even as the root user.
I had a back up on the second drive of the mini. I did buy the USB drive when I bought the mini, so I was able to boot off the install disc. Then from the menu I choose the back up partion as the start up drive. After restarting, I was at least able to recover and copy my important files to the back up partition. I have not been able to work out the login issue yet. I’ll probably just do a reinstall on the corrupted drive.
In any event, it maybe worth it for you to buy the USB drive and boot off of it.
The verbose mode is for you to be able to login through the command line and trouble shoot from there.
Also, in safe mode, any files that you may want to change permissions, you may need to change the owner and then change the permissions. This is done with the chown command and then chmod command. You’ll need to use the sudo command so you can become the root user to use the commands and make any changes.
Hope this will at least help you get further in troubleshooting this issue.
Bill B

Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

Mac Mini "server" won't boot Clonezilla CD

Has anyone gotten the Clonezilla Live 1.2.3-27 or alternative 20100121-karmic CDs to boot on this dual-drive box? Mine shows this...
ISOLINUX 3.84 2009-12-18 ETCD
pauses for about a minute, then ends with
ISOLINUX 3.84 2009-12-18 ETCDisolinux: Disk error 01, AX = 425B, drive 90
Boot failed: press a key to retry...
The CDs boot just fine on my Mac Pro. Thanks.

Greetings Richard, I ran into a similar situation recently with my mini server. although I believe it to be a problem of my DNS settings getting hosed. I couldn’t log in no matter what log I used-even as the root user.
I had a back up on the second drive of the mini. I did buy the USB drive when I bought the mini, so I was able to boot off the install disc. Then from the menu I choose the back up partion as the start up drive. After restarting, I was at least able to recover and copy my important files to the back up partition. I have not been able to work out the login issue yet. I’ll probably just do a reinstall on the corrupted drive.
In any event, it maybe worth it for you to buy the USB drive and boot off of it.
The verbose mode is for you to be able to login through the command line and trouble shoot from there.
Also, in safe mode, any files that you may want to change permissions, you may need to change the owner and then change the permissions. This is done with the chown command and then chmod command. You’ll need to use the sudo command so you can become the root user to use the commands and make any changes.
Hope this will at least help you get further in troubleshooting this issue.
Bill B

Mac Mini server won't boot.

Our server is on, but when we try to access it via its screen it excepts password but returns to login page. Any ideas?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Mac Mini Server won't display new web content

I have my server up and running and my webpage (jacrouch.com) is up and running as well with coldfusion and SQL working. I have had some issues with a specific SWF file containing three links that disappears from several pages, but is working on one page. I have attempted to correct this and made changes to ensure that the SWF file is indeed working properly on my development machine.
I uploaded the corrected files, but the web content does not change. I have completely deleted old content and ensured that the new files contain the corrections, but still the old files are the ones displayed on web.
Any help is appreciated.

OK. I just had a brainfart...
apparently, when you run coldfusion on a server (this is my first time doing this), your server root folder as well as the coldfusion (wwwroot) root folder need to match. I just had to copy and paste my files into coldfusion and it runs great!

Monitor Not Going To Sleep on Mac Mini Server With Lion

Summary: I am attempting to configure a Mac Mini Server that runs OS X Lion. This machine was originally shipped with OS X Lion; it is not an upgrade. My current specific problem is that my Viewsonic VX2835wm monitor will not go to sleep when the minutes setting on the Display Sleep setting for Energy Saver has been reached. Instead, the screen goes blank for a couple of seconds and is replaced with a blank blue backlit monitor. (Ironcially, the display sleep menu cautions: "Never letting your display go to sleep may shorten its life".) I very much want and need the ability to have my monitor go to sleep so as to save energy and to extend the monitor's life for as long as possible.
Additional Background: I have had a couple of calls with Mac support and they have been unable to tell me whether this is a "design feature" or a flaw in the Lion OS because they have had no similar reports and they do not have the latest hardare available running Lion Server to test to see if this happens with other monitors. (They also, of course, don't have the VX2835wm monitor.)
I do, however, know the following:
(1) My HDMI monitor is connected to my Mac mini via a DVI KWM switch (ATEN CS1784) such that the HDMI output from my Mac is converted to DVI (using the DVI to HDMI converter that came with my Mac Mini) and is then run through the KVM and then converted back to HDMI (using a full pin DVI to HDMI cable). However, I have tested the monitor with a straight HDMI to HDMI cable running directly from the Mac Mini to the monitor and it has not changed anything.
(2) The Lion operating system correctly recognizes (in Hardware / Displays) the model of my ViewSonic monitor.
(3) I have a MacBook Pro running Leopard (OS X 10.5.8) that is connected to the same monitor through the same KVM switch (by way of a BookEndz docking station) which properly shuts down the monitor when there has been no activity for however many minutes are set in the Display Sleep setting under Energy Saver. (Indeed, all I want is the same functionality on my Mac Mini that I have enjoyed for the last two years with this MacBook Pro.)
(4) When fully connected to the KVM, if I switch from my Mac Mini to my MacBook Pro and my Mac Mini display goes to sleep while I am working on my MacBook Pro, when I switch back to the Mac Mini, my monitor backlight will be off (and the power light will be standby yellow rather than the blue on) until I wake my computer up by touching the mouse of keyboard. I wonder if this may mean that the Mac Mini's signalling of the change in status from on to standby is somehow dysfunctional.
(5) Shutting down the server functions (and other open applications) has no effect.
I would greatly appreciate feedback from anyone out there running a Mac Mini with Lion regarding whether or not their monitors go into standby mode when the Display Sleep time is reached (please note whether or not you are running the Server or Client version, whether or not it is a new install or upgrade, and what monitor you are using).
Thanks in advance to anyone who can help.

No, I didn't solve the problem. The monitor still goes to sleep with WIndows but not with my Mac Mini. About 8 months ago I basically wore out the power switch on my monitor so I bought a wireless power switch to shut it off at the outlet. The VX2835wm monitor itself is now starting to fail as well-- a couple of times it's gone through a weird sequence of flashing screen colors on power up and ended up in an overscan mode (that took me for ever to figure out how to fix). I have decided to replace my VX2835wm with a Dell u2412m once it fails for good partly because I really want to keep the 16:10 resolution (very hard to find these days) and partly because I want to see if a different make of monitor will go to sleep properly based upon my Mac Mini power down settings.

FileMaker Server problem on Mac Mini Server - Mac Mini won't boot

I just installed a brand new Mac Mini Server today, and also FileMaker Server 11. A first-timer for both Mac OS X Server and FileMaker Server, I made an error as explained below, and right now I don't know how to get back on track with the system. It won't boot.
So, how did this happen?
At first everything was proceeding according to plan. I configured the pre-installed Mac OS X Server on the Mac Mini with users, groups and services. This was tested from clients and this seemed to work just fine. Then I installed and configured FileMaker Server. This was also tested from a client, and the example database that came with FMS was served up just fine.
The problem arose when I tried to install my existing FileMaker databases. I simply checked to see where in the file system the example database was located, and then copied my old databases to that location (I think it was Library > FileMaker Server > Data > Databases or something close to it - can't check it now...). I had the FileMaker Server Admin Console running, and hit the Refresh button hoping that this would make FileMaker Server find the databases.
This was my first error. I should have read ahead in the instructions to see that one is supposed to use an Upload Database assistant instead...
What happened when I hit refresh was that the FileMaker Server Admin Console became completely unresponsive with a spinning ball as cursor. I left it for about an hour hoping it would terminate, but gave up and tried to shut it down. It wouldn't close, so I force quit it from the Finder. Then I tried to shut down FileMaker Server, but I needed to force quit this as well. After this I thought it would be best to reboot the Mac Mini, so I shut it down, but now it won't even boot, it just stays on the screen with the spinning wheel for ever!
I have tried all the keyboard options while booting, but nothing seems to help. In safe mode, the grey progress bar just grows to about one third, then disappears and leaves the eternally spinning wheel.
The server version of the Mac Mini doesn't have an optical drive, only two internal hard drives. I tried to reinstall from scratch using the optical drive on another Mac on the network. The startup disk appeared when I tried to boot the Mac Mini holding down the option key, and after about 20 minutes or so of the spinning wheel I could actually access the discs. I started by running Disk Utility to check disk permissions. There were a lot of repairs concerning permissions and groups, especially on "Library". It said "ACL differs on Library", I don't know what this is but this was repaired. I then ran Repair Disk. The volume appeared to be OK.
When I tried to reinstall Mac OS X Server however, this failed with the message
"You can't upgrade this version of Mac OS X because a newer version is installed. Mac OS X Server couldn't be installed on this disk." I don't know how this can be, but I may have run software update earlier today.
What should I try next? Should I erase the primary HD and try to install again? Or should I install the system software on the secondary HD? Or should I just try to reboot as is in the hope that the disk permission repairs did the trick...?
Any helpful pointers would be greatly appreciated!

Hello there, I came across your post when browsing the forum for passive advice. I am in the same boat as you and am a first timer for both of these tools. I work for a company who now needs to expand its network and database capabilities. I have been assigned this task and these are the tools i have opted for. I have not yet purchased them and i am pleased to find someone who has my desired setup. Could you please advise on the simplicity of the setup and whether an advanced knowledge is required.
I want to use it in a mixed operating system environment. Is this possible?
Regards
Matthew

Mac Mini Server 2011, with lion, sleeps every day

My new Mac Mini Server 2011, with lion, sleeps every day! Server not responding.
All services are down, smb, vnc, ssh too. And it not should be happen because this is a server, right?
Please, I need help with this problem!
How to fix it?

1. Go to System Preferences.
2. Select Engery Saver
3. Slide the setting for Computer sleep to never.
4. Slide the setting for Display sleep to never (though I believe the display should be able to sleep without much issue.
5. Make sure the following are not selected:
a. Put the hard disk(s) to sleep when possible.
b. Allow power button to put the computer to sleep.
6. Make sure the following are selected:
a. Wake for network access
b. Start up automatically after a power failure
c. Restart automatically if the computer freezes.
Good luck!

Mac mini server mid 2011 lion mouse pointer disappears after sleep

Hi,
I bought a mid 2011 mac mini server (quad core) running OSX Lion (10.7.2), and I use it with the magic trackpad. Sometimes (not every time) when I wake the computer from sleep (I let it sleep via the menu at night), the mouse pointer is not visible. I can use the trackpad, and move the mouse and click, only I cannot see where I click because the mouse pointer is not visible.
The batteries in the trackpad are OK.
When I plug in a USB mouse, I can move and click that too, but the mouse pointer is still invivible.
So it seems to be OSX related
The only thing that seems to help is to restart the system. After reboot the mouse is back as normal. Still this is very annoying as it makes sleep quite useless.
Anyone else suffering from this? Any solutions? Thanks.
Thanks,
Gino

I also have this issue intermittantly but fairly often.
But sometimes the cursor comes back but the screen stays black except where the cursor has moved across, revealing the screen, a bit like using the spraycan tool in MacPaint years ago.
And to top it off I have a problem with sleep making all the open apps try to quit, but one is always unable to, and it seems to lock everthing up until I wake up the mac, and then all the apps that were open do resume, but in the meantime any TV programs that should have recorded (by waking up mac to record) using my Elgato EyeTV have been missed ...

Mac mini server (mid 2010) 10.7.2 and 10.7.3 won't install

My Mac Mini Server running Lion 10.7.1 will not accept the update to 10.7.2 or 10.7.3. I know that there have been some MacBook Pro's that wont accept the install. I have run disk utility and repaired disk permissions and verified the disk. I cant boot off a disk as Lion is a direct download from the App store. I have read that 10.7.2 was very buggy and some people were restorong back to 10.7.1. Can I update to 10.7.3 from 10.7.1. I have also tried the stand alone installers. The same problem the .dmg downloads and opens I run the install package which validates and runs. When I am prompted to restart a message comes up same unexpected error ocurred unable to install and a restart option. Its driving me nuts.

Did this Mini come with 10.6.x?
If so, Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT.

Mac Mini Server won't go to sleep!

Similar Messages

Maybe you are looking for