Mac mini server won't reboot after Installing security update 2010-003

This has already been posted and remaines "unanswered".
After updating to Snow Leopard Server 10.6.3 and attempting to reboot, the mac mini (HDMI) hangs on the gray apple logo with progress spinning. It takes me several times to force the mac mini to power down and try again, before it finally loads the login screen.
any suggestions?

Odd.
So it's hanging while starting services, it looks like, the firewall in particular, have you tried a safe boot?
If not, hold down the shift key right after you hear the power-on chime, keep holding it till you see a spinning gear.
This boots up without extra kernel extensions and fonts, clears font caches, and runs a disk verify and a repair if needed. If you still can't boot reliably in safe mode, you may need to run an archive/install.

Similar Messages

Applications crashing after installing security update 2010-003

Hi all, anyone else having this problem (and found a solution)? After installing security update 2010-003 on snow 10.6.3, entourage, firefox, and even itunes are crashing at launch. Safari seems stable, but haven't tried other apps yet. Verified permissions on my boot disk and repaired it but the problem persists. It started after rebooting after installing the security update. I'll reinstall the OS if needed but hoping this is a bug someone has solved. Thanks!

http://www.thexlab.com/faqs/multipleappsquit.html

Ethernet has stopped working after installing "Security Update 2010-003"

I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange". The wifi still works.
Has this happened with anyone else? I am curious as to how I can either uninstall the update or make the ethernet work again..
Much thanks for any recommendations you may have.

Hussain Ameen wrote:
I installed the update recently and have been unable to connect to the internet. The network still gives me an ip, but the internet and server button remain "orange".
Welcome to Apple's discussion groups.
I'm not having that problem after installing the security update.
If you open the Network panel of System Preferences and select the Ethernet connection item, is it set to "Configure" "Using DHCP"? Do you see reasonable values for "IP Address", "Subnet Mask", "Router", and DNS Server"?

HT201366 CAC readers not working after installing security update 2013-003?

Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

For CAC issues, see:
MilitaryCAC's Mac OS X support landing page
Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

Mac Mini server won't boot after logoff, any suggestions?

My mac Mini Server will not boot after administrator logoff, I get a gray screen with the spinning progress wheel, but nothing happens. Any suggestions?

Can you boot into single user mode? If so, run fsck and post the results.

HT1222 My internet speed has slowed to a crawl after installing security update 2015-003. Any ideas on how to fix?

I have a mini mac with 8GB ram and running yosemite OS. I recently installed security update 2015-003 and now my internet connectivity have slowed to a crawl. sometimes if I turn wi-fi off and then back on the speed returns to normal but sometimes it does not. Any ideas what may be causing the slow internet speed?

Please check the speed of your connection on this site.
Then start up in Recovery mode. In the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Check again. Then restart as usual and post the results.

Mac mini server won't load after creating RAID0

After creating a RAID0 stripe set and tried to re-install Lion server back on my new Mac mini server, it failed at the end of the installation asking me to try to run the installation again, I tried three times with the same result. So I tried to boot from a USB Lion image but it won't recognize it, I even tried to boot from a USB Snow Leopard image and it won't recognize it either. What else can I try to bring my Mac mini server back.

Have a look at this thread guys, it should help sort out your problems.

Macbook won't boot after installing Security Update 2008-007 (Intel)

I installed security update 2008-007 (intel) on my MacBook last night using Software Update, but now my machine won't boot at all. All I get is the gray start-up screen with the dark gray apple, but there's no spinning progress bar or anything. After 5 minutes or so, the machine auto-restarts, but again hangs on the gray start-up screen. It does this over and over again until I shut it off. I tried to boot into safe mode by holding down shift right after the chime, but it still wouldn't boot (again, not even a spinning progress bar). Can anyone please help me? I really don't want to lose my photos/movies, etc. I'll backup everything promptly if I can just get it to boot. Thanks.

Hi jared-lee, and again, a warm welcome to the forums!
First for safety, "Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
This may or may not fix the problem, but may.
Do you have another Mac around?

Clamd fails after installing Security Update 2010-004

A few months ago while running clamav-0.96, I began to get "Assertion failed" notices in my system log. But I applied a PowerPC patch available at clamav.net and that solved the problem. Later on, I updated to clamav-0.96.1 and everything continued running fine until yesterday when I installed Apple's Security Update 2010-004. Now I'm seeing the "Assertion failed" messages in my system log again just about every 10 seconds:
Jun 17 07:55:17 nagxserveg5 net.clamav.clamd[686]: Assertion failed: (ResultPtr
= -(1 << 23) && ResultPtr < (1 << 23) && "Relocation out of range!"), function
relocate, file llvm/lib/Target/PowerPC/PPCJITInfo.cpp, line 399.
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Formulating crash report for
process clamd[686]
Jun 17 07:55:19 nagxserveg5 ReportCrash[705]: Saved crashreport to
/Library/Logs/CrashReporter/clamd2010-06-17-075517NAGXServeG5.crash using
uid: 0 gid: 0, euid: 0 egid: 0
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd[686]):
Exited abnormally: Abort trap
Jun 17 07:55:19 nagxserveg5 com.apple.launchd[1] (net.clamav.clamd): Throttling
respawn: Will start in 1 seconds
I tried reinstalling clamav-0.96.1 (configure/make/make install) and
rebooted, but that didn't help. And attempting to reapply PowerPC patch, I just
get the message that the patch is already applied. I have had to turn off virus scanning in ServerAdmin/Mail service in order to send/receive any mail. Otherwise, everything fails in virus scanning and just ends up sitting in my Mail Queue.

Yes, but you also mentioned that you tried to apply the patch which is not needed
Looks like a freshclam update broke things then. Until they reliably sort it, you can safely rebuild ClamAV using --enable-llvm=no or --disable-llvm (don't remember which one is correct off the top of my head).

After installing Security Update 2010-006...

Hey guys,
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
It cannon to any wifi network and also sometimes no network can be found.
What can I do?

Cheong! wrote:
After I run the Software Update and security update 2010-006 is installed,
the wifi service of my macbook is not working.
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
If those don't help, I'm not sure I have any other advice.

Mac Pro Won't Start After Installing Security Update Tonight

I just installed the latest security update for Lion on my Mac Pro via software update. The update seemed to install fine. I was about to start work when all of a sudden the system rebooted on its own. Now it just continues to reboot because it can't complete the boot up.
I tried resetting PRAM and SMC, but this didn't help.
I tried booting up from CD using an old SNL disk. I was able to get to disk tools once. I checked my startup volume and disk tools said the volumes is fine. I was checking permissions when once again the system rebooted on its own.
I tried starting up in safe mode, but it only gets so far into the boot process before it reboots.
I tried starting in verbose mode, and noticed several SMC related errors (this is why I tried to reset the SMC). No joy.
If I leave the system sit a few minutes, it gets further into the boot process, but still won't boot completely.
Any suggestions?

Mac Pro tower or MacBook Pro notebook? Which model?
If you are encountering kernel panics, check in the logs as suggested here and post a recent kernel panic log:
http://support.apple.com/kb/HT2546
Mac OS X: How to log a kernel panic

Mac book Pro won't start after installing a update, Mac book Pro won't start after installing a update

I installed a update on my Mac book pro, now when I try to start it, it'll come up with the apple logo and a loading bar below it, gets to about 1/4th and shuts down every time.

Hi Jacobmitchell92,
If you are unable to start up past a grey Apple screen after doing a software update, you may find the following articles helpful:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem.
http://support.apple.com/kb/TS4636
Regards,
- Brenden

Safari won't start after installing security update 2006-001

today i updated my computer with the latest Security patch. Now my computer wont start the browser
i deleted the preference file on my preferences folder to try to solve the problem, but i still wasn't able to start the browser.
i created a new user and tried to start safari once more, but still the progam crashes before it even starts.
this is the output that i get from the crash reporter
Date/Time: 2006-03-02 16:44:55.777 -0500
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [63]
Version: 2.0.3 (417.8)
Build Version: 1
Project Name: WebBrowser
Source Version: 4170800
PID: 445
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x95aadd70
... also the Sofware update softare wont start. It will crash before it even starts.
this is the output from the crash reporter
Date/Time: 2006-03-02 16:43:46.431 -0500
OS Version: 10.4.5 (Build 8H14)
Report Version: 4
Command: Software Update
Path: /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update
Parent: WindowServer [63]
Version: 2.0.5 (2.0.5)
Build Version: 24
Project Name: SoftwareUpdate
Source Version: 1360000
PID: 439
Thread: 0
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x95aadd70
any ideas how to fix it?
Powerbook G4 12" 1.5GHz Mac OS X (10.4.5)

- FOR OS VERSION UPDATES YOU CAN ROLL THEM BACK
have to trash the UPDATE10.4.?.PKG file that is located in:
Hard drive> Library> recipts folder> ??.pkg file. (check spotlight search if you cant navigate to the Recipts folder for .pkg files to take out the one for the latest update you have done.
Basically the only way to "roll back" any applications or drivers that are updated is to do an entire Archive and Install of your OS (can do preserving user and network settings and WILL NOT LOOSE ANY DATA) see knowlege base article 107120 for A&I how to. You can always do the software updates later after the A&I.
That particular security update may have been faulty so of course, mabye try the DL again to see what happens and by all means CHECK THE SUPPORT TAB of this site for software updates if you want to do them. IF IT AINT BROKE, DONT FIX IT. most software updates do little or nothing for the application and somtimes they could cause problems LIKE loosing your itunes library when going from 5.0 to 6.0 and so on...

Mail won't open after installing security update

hi
i just installed the newest security update and now mail won't open. i get the spinning ball of death.
has anyone else had this problem or have any ideas how to fix it without reinstalling everything?
thanks.

hi
i just installed the newest security update and now mail won't open. i get the spinning ball of death.
has anyone else had this problem or have any ideas how to fix it without reinstalling everything?
thanks.

Mac mini server won't reboot after Installing security update 2010-003

Similar Messages

Maybe you are looking for