Mac Mini shows blue or pink tint using DVI to VGA adaptor on 800x600 HDTV

My new Mac Mini won't retain the color settings for this TV/Monitor that is connected via the DVI to VGA adaptor. I've tried to find the display using the Mac utility. I finally got the Mac to create a color profile for the TV by plugging a USB cable from the TV to the Mac, while the VGA cable was also connected. The Mac displayed a new color profile called RCA/ProScan (the TV brand), and the colors looked acceptable. I then saved that color profile. The monitor would then revert to a very blue tint, or a very pink tint without notice. I thought it might have been when I disconnected the USB cable, or when I re-booted the Mac Mini, but I can't detect a cause & effect pattern. I might try to connect the TV using a DVI to S-Video adaptor instead of VGA, but I don't know if it will help. Can someone help? Thanks.

Make sure it isn't a simple cabling problem. Check all the connections and tighten down the thumb screws. The mini is prone to a poor video connection and you need to make sure the video cables are tightly attached.

Similar Messages

Using DVI to VGA adaptor with HDMI to DVI port on Mac Mini Server

Hi - I couldnt find anything on this, so I decided to post a new topic. We just recently purchased a Mac Mini server at work for iOS development. Before we launch in in one of our data centers and start remoting into the system, we need to conduct basic setup on the system.
For this, we pulled out an old stock VGA montior we have around the office, and found an apple DVI to VGA adaptor (http://i51.tinypic.com/2mzb4lc.jpg)
The problem is, the pins dont exactly line up... on the DVI to VGA adaptor there are 2 extra pins above and below the horzontial pin on the left hand side (http://i52.tinypic.com/2mxhg1j.jpg) that do no exist on the Mac Mini HDMI to DVI adaptor (http://i53.tinypic.com/2ywesrp.jpg).
Ive checked other converters and it seems that all of them are setup the same way, with two pins above and below.
Has anyone else had to deal with this issue? I really dont want to go and buy the Mini DisplayPort to VGA adaptor for one-time use.
Thank you!

Welcome to  Discussions!
What you are seeing is the difference between an analog and digital DVI connector, as DVI as a specification can provide both types of signal, depending on implementation. When used in a mode where only one or the other type of signal is provided, the different connectors prevent a mismatch. VGA being analog, the DVI to VGA adapter is using an analog DVI connector. The other connector you are dealing with is a digital only connector. HDMI is digital only, hence the HDMI to DVI adapter being digital only. Thus you can not adapt from the HDMI port to VGA with just passive adapters, you would need a conversion device between. It would be cheaper and more effective to use a Mini DisplayPort to VGA adapter.

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

HT3275 The backup disk image "/Volumes/Data/JIP's Mac mini (2).sparsebundle" is already in use.

I have a time capsule that I use for my apple computers. My iMac has no problems but my Mac mini keeps getting this error for backups:
The backup disk image “/Volumes/Data/JIP’s Mac mini (2).sparsebundle” is already in use.
What do I do?

Please shift the focus of your eyes to the right side of this page to find the heading of More Like This. There are multiple answers and solutions there.

How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?

How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?

bwhit:
Welcome to Apple Discussions.
No reason why you should not be able to do it using Firewire Target Disk Mode. Here's what you do:
1. With both computers shut down connect both via firewire.
2. Startup the Mini and hold down "T" key immediately after chime.
3. Startup the PB and immediately after chime hold down Option key.
4. Select second HDD icon on the screen and click on the right pointing arrow.
5. Computer will boot from Mini's HDD.
Be sure to shut down PB completely before shutting down Mini.
Please do post back with an update or with further questions or comments.
Cheers
cornelius

Hi I'm from the UK and I'm visiting the US in June I was wondering would I be able to buy a Mac mini over in the US and use it in the UK with a power adapter. Thanks!

Hi I'm from the UK and I'm visiting the US in June I was wondering would I be able to buy a Mac mini over in the US and use it in the UK with a power adapter. Thanks!

You won't need a plug adapter if you buy a figure-of-eight mains lead (like most portable radios etc) with a UK plugtop to replace the original lead.

My mac mini shows the first octet of its ip address as the name of the machine in Finder

Now for something really strange. Up until about yesterday my Mac Mini showed the main disk in Finder as something beginning with James, maybe James Mac Mini. Now, today, it shows 192, which is the first octet of its IP address. The only change I've made today is to try and get Time Machine running again - or rather, to fix it so that I can see the time machine backups.
I see, incidentally, that the machine directory on Time Machine is also 192.
It may be worth my while mentioning that there is a strong hypothesis around that the NVRAM battery is dead or dying, but I haven't been in a hurry to change it as it's the last thing you take out of the case when you make any repairs. I'd be more willing if a thing like that sat a little nearer the memory chips.

its nothing to do with itunes, its movies form the internet. i got the file preview by taking an image off the internet, pressing command c and pasting it on top of the small icon in the get info section

Mac-Mini HTPC Video-Out Problems (Component to DVI)

I recently decided to go with a Mac-Mini as the central-brain of my HTPC configuration, and I was immediately halted in the process of getting things working by my inability to properly output video from the Mac-Mini such that it's even visible on my 50" Plasma TV (Panasonic TH-50PHW3).
Neither of my A/V Receivers (Denon AVR-3805 & Denon AVR-2805) have HDMI inputs, but both of them have component video inputs for HD content, so I purchased the DVI-to-Component cable linked below to use for outputting video from my Mac-Mini to the Denon:
http://sewelldirect.com/DVI-to-Component-Adapter-Cable-6ft.asp
Needless to say, nothing I've tried has been effective in my Mac-Mini being displayed on my Plasma TV??
Any thoughts?

From other threads I see that others have tried and failed at this. The adapter cables don't work with the Mini (or other Macs as far as I know). Apparently you need a "transcoder" box. It will apparently take the DVI port's RGB signals and convert them to Y-Pb-Pr component signals.
The transcoders can also cost a couple hundred bucs. Check out some of the discussions at http://www.avsforum.com/avs-vb/showthread.php?t=824143
Here is a relatively cheap one that seems to work: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=63079 2&CatId=1430
Other option is to go with a S-Video adapter http://store.apple.com/us/product/M9267G/A but you will loose resolution.l
Message was edited by: Saul in PA

Using a VGA monitor with Mac Pro: DVI to VGA adaptor cord & X1900 card

I will be purchasing the MacPro with the ATI Radeon X1900 XT. However, I want to continue using my dual Viewsonic CRT screens till the end of the year until I make the leap to a new LCD display. I know Apple sells a DVI to VGA connector and in fact I believe it to be included as an accessory.
Here is my question:
The graphics card I am buying (the X1900) is designated as a DUAL LINK DVI. The Apple DVI to VGA adaptor cord has a DVI -I SINGLE LINK male connector. Will this DVI-I single link connector properly mate to the female dual link connector on the X1900 graphics card? If it will, I'm probably in business. If it won't, does anyone have an idea for a workaround?
Many thanks, John
G4 dual 450 Mac OS X (10.3.9)
G4 dual 450 Mac OS X (10.3.9)
G4 dual 450 Mac OS X (10.3.9)

The DVI to VGA adapter works fine with the Radeon X1900XT (and the Geforce 7300GT and the Quadro FX4500).
The DVI to Video adaptor works on the Radeon, but not on the two Nvidia cards.
JH
dual 2G G5 Mac OS X (10.4.4) GeForce 6800 Ultra, 2GB DRAM, 30" display

Using second display via eMac's mini-DVI to VGA adaptor

Hi,
I've got a 19inch widescreen display from Acer, model no. AL1916W. I have apple's mini-DVI to VGA adaptor and have connected the second display to the point where it mirrors the screen on my eMac, however I don't want it to do this.
What I had intended is that the second display would act as an extension of my eMacs screen, so I can drag windows across for extra space. Is this possible with the eMac?
Put more specifically, I want to be able to put logic's main (arrange) window on the Acer widescreen, and then have whatever else on the eMacs screen? Is there a workaround to do this?
help much appreciated,
Toby

Hi,
It's funny you should send me that link, I actually found that a couple of hours after posting this and tried it. It worked perfectly, I now have the widescreen running in it's native resolution and working as a separate screen which I can drag stuff in and out of. I came back on here to mark the question as 'answered' but I couldn't find how.
thanks for your help,
Toby

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682)

HT3382 DVI to VGA adaptor with Apple Mini

I have a slightly older Apple mini and would like to connect it to my TV, which only has a VGA port. Which adapter should I use? The "Apple DVI to VGA adaptor"?

DVI

Mini DVI to VGA adaptor

Hi - having a frustrating time trying to buy a mini DVI to VGA adaptor for a macbook with a core 2 duo - none on the apple shop, only ones for intel core duo which does not fit (says review)
I need to to connect a monitor to the MacBook. Help

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
Here's the various types of Mini DisplayPort adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_sc_2_16?url=search-alias%3Daps&field-keywords=mini+ displayport&sprefix=mini+displayport&rh=i%3Aaps%2Ck%3Amini+displayport
To see which model youhave go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion).When System Profiler comes up check the Model Identifier and post it back here.

Which mini DVI to VGA adaptor?

I have an 800MHz flat screen with a broken display.
I have an old monitor with a VGA cable, but I can't find the correct cable to connect between the iMac and the VGA plug.
I have a mini dvi to VGA adaptor, but it's not correct in that the mini DVI end is female on both the computer and the adaptor chord I have ):
Can someone point me to the correct adaptor cable?
Thanks,
Luke

Hey Luke,
What you need is the mini VGA to VGA adapter like here:
http://store.apple.com/us/product/M8639G/A?fnode=MTY1NDA3Ng&mco=MzI3MTYx#overvie w
If you buy it at the Apple store make sure they understand that that's the adapter you need and for what machine you need to use it on. Then if they give you the wrong one you can take it back.
On a separate tack I had a problem with the socket on a 800 17" that had come off the logic board. Symptom was no video no picture but worked fine with external adapter (mine had to be jiggled a bit to get it to work). I just sent it to Superior Reball to have it resoldered. Cost $51 plus shipping one way. That would take someone knowledgeable to take the iMac apart.
Richard
Message was edited by: spudnuty

Mini display port to dvi or vga adaptor?

I currently use a MacBook Pro and want to use the mini display port to my 24 inch Samsung LCD screen. My question is should I use the mini display port to DVI or VGA? My Monitor has both ports on back. I know that DVI is Digital and suppose to be the superior source compared to VGA analog, but I have only used VGA when using my Monitor with my old PC and it seemed fine enough for me.
If, I do go the DVI digital route will it be that much better graphics compared to just using VGA?
Finally, has anyone hooked up a mini display port to either DVI or VGA adaptor into an LCD monitor? What are your thoughts, concerns, advice etc. I realize its a very easy thing to do, but seem tied up between using DVI or VGA port.
Thanks,
DH

Diffferences are not remarkable but DVI is indeed better. I wuold then choose DVI.

Mac Mini shows blue or pink tint using DVI to VGA adaptor on 800x600 HDTV

Similar Messages

Maybe you are looking for