Mac mini shuts down on its own during sleep shows a prolonged white screen when starting

10.9.4 2.4 f 8 g menmory ..shuts down by itself when it sleeps..when I restart in the am I get a prolonged white screen.  took it to a genius bar who found it checked out ok. but found a slightly loose monitor jack was loose...recomended more ram which I did . then reinstalling my os which I have not done...iphoto lost everything too...as my brother Tim used to say whattttttt ?

From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Similar Messages

  • Mac mini shut down on its own, will not restart, grey screen, spinning wheel. Unplugged everything, will still not restart. Did safe boot, will not restart after safe boot, only grey screen with spinning wheel.

    Mac mini shut down on its own. Could not restart, chime, grey screen and spinning wheel. Unplugged everything but monitor, still only chime, grey screen and spinning wheel. Started in safe boot, shut Down, will not restart.
    This happened a couple of months ago, unplugged everything and it restarted, now that won't work.

    Hi BDAqua,
    I just did the repair as you suggested. T ran the disc repair, and twice it cam back, the volume macintosh seems ti be okay, I also ran the verify and permissions repair, both came back okay.
    I was actually hoping that they would find something, so they could repair. I shut the computer down, and restated with out holding a key, and I started up great. I'm baffled.  I have moved 20 GB to an external hard drive, as I only had 10% open space.
    I have Tech Tool 6, would you recommend to run a repair check on that, or just leave well enough alone.
    I agree with you on the new Mac's, I have problems with no disc for back up, until they realize their mistake I will stay with Snow a Leopard. This is the first problem I have experienced, so I can't complain. Their last programs are not as perfected as under Steve, prior to his handling over the reins, hope this is not going to be the future we can expect from Apple.
    I will wait to here back as to your suggestion regarding the Tech Tool check
    Thanks for all your help.
    Gratefully,
    Cheri

  • Mac Pro shut down on its own, then on boot up it beeped steadily for 2 min?

    I put my 2009 Mac Pro to sleep then the next day I find it completely shut down! I boot it up and then I hear a steady beep (every second) for about 2 minutes. After 2 minutes the beeping went away.
    Any idea what caused Mac Pro to shut down on its own? And what does the steady beeping mean? The beeping is coming from inside the Mac Pro's speakers, not from my BOSE 5 computer speakers.
    I don't think there was a power outage as the UPS is fully charged, and I asked a neighbor across the street.

    I wasn't clear in my description, it's a steady continuous beep, it's a rhythmic beep -- it'll do this for 200 beeps or about 2-4 minutes.

  • Droid mini shuts down on its own

    Since updating Android about a week ago, my droid mini has shut down on its own at random times. Pressing the power button won't start it up either. I have to continually press for over a minute before the phone powers up. Battery is over 70% so that shouldn't be the issue.
    Thanks for any ideas on how to cure this!

    I would suggest trying running the device in safe mode. There may be one of your 3rd party apps that are interfering somehow with the proper functioning of your device, and safe mode will disable them for diagnostic purposes. If running safe mode improves the phone's performance, one of a couple things may happen. Your phone may "fix itself", correcting its own glitch now that there is no interference from a problem app, or it may just run better while in safe mode. You'll have to restart again as normal to determine which one it is. If it goes back to glitching, then you will need to go back into safe mode, remove all 3rd party apps, and then add them again one by one to determine which one was the problem.

  • MacBook Pro won't boot and shut down on its own.

    Hi, I am running a Macbook Pro. My problem is that the OS froze during use, and I could not move the cursor. As which point I force shut down by holding the powerswitch. From that point onwards I could not get the machine to boot, it keep getting stuck at the grey screen with Apple icon. After loading at the grey screen for 15-20 mins it shuts down on its own.
    I've tried to reset SMC (shift-control-option + power button) and PRAM (Command-Option-P-R) but it dint work. Please help. Thanks.

    It appears your problem occured after you upgraded to 10.8.2, but if you did it right after the SSD and RAM switch then it's hard to tell exactly what is causing the issue.
    I advise returning back to factory, hold command option r boot and wipe everything and reinstall 10.8
    ..Step by Step to fix your Mac
    If the problem continues, then make a warranty/AppleCare call, hopefully you didn't strip the screw heads or leave any other tell tale damage inside.
    If your fine on 10.8.2 for some time, then switch the RAM and do a hardware test extended or Rember or Memtest to make sure the new RAM is not the issue.
    If that's fine then Carbon Copy Cloner to the external SSD and hold option key down to boot from it and test that.
    Then do the internal SSD switch and test that.
    Take your time, Mac's are so finicky and you can't just slap this or that and expect it all to immediatly work like it should.

  • Mac mini shuts down after 10 seconds..

    At first today, the CDs and discs kept automatically ejecting and wouldn't read (obviously). So I keep putting them back in hoping it would read or hold something. Then I restarted and the Mac Mini shuts down after 10 seconds of the seeing the desktop. Did I fry it? I did hear a weird sizzling when I put my hand on top of the mini. And is this under any warranty - I bought it Feb. 07? Any help would be greatly appreciated.

    Any thoughts on that?
    One or two come to mind, not least that if the unit is under warranty now (as it clearly is) and they aren't taking this fault seriously, then buying AppleCare so it remains under warranty longer isn't the right solution - having them examine it and resolve the problem is.
    There's no doubt at all that in the event there is a system with a suspected fault, extending the warranty long enough that the system ceases to function and can be repaired is a good thing, but it shouldn't be necessary to go to that extreme in order to get a problem resolved now!
    I would simply take this elsewhere and have it looked at. While odd noises are sometimes hard to hear in an environment where there are people and other activities going on, and thus it is reasonable to expect diagnosis of them to prove difficult, a system that shuts down of its own accord after a few seconds is clearly not working correctly. To be sure, if it is overheating, then testing it when it's cold is likely to miss the problem, but the description of the fault from the user ought to give enough clues to put the system on test long enough to see what happens when it warms up. If the fault can't then be replicated with a system that is at normal running temperature and under load, then giving it a clean bill of health is reasonable.
    Thus, in your place I would ask them if they did, in fact, test it in that way. Alternatively, write a description of the fault, specifically identifying the premature shutdowns and the circumstances in which they happen (if they still do) and the noises and the circumstances in which they occur (if they still do) and take the system and description to an approved service provider and let them look at it.
    If the shutdowns are no longer occurring, and the noise is absent, then whether you buy AppleCare or not is really a matter of how confident you are that the problem has gone. If you have doubts that the system is running correctly, AppleCare is expensive but at least extends the warranty sufficiently that you can stop worrying too much. Alternatively, if the problem(s) still persist, rather than AppleCare, have the system examined and repaired right now.

  • HP pavilion dv6000t shuts down on its own

    Hello,
    My HP Pavilion dv6000t is now 3 years old and I recently replaced the fan as it was making a lot of noise.  Referring the online guide, i removed all components necessary to replace the fan and put it back.  It worked great for a few months and now I started getting blue screen of death and the laptop shuts down on its own.  I then tried starting it back and it works for like 15 mins and then shuts down on its own.  Found that hard disk gets very hot.  Initially thought it might be an hdd issue.  Got another 2.5" laptop harddrive, inserted it and started installing windows.  It behaved the same way.  During formatting of hdd, the screen went blue completely and then the system shut itself down.   Switched back to old hard disk, installed fedora linux and it installed fine.  As soon as it installed, logged into the OS and it showed error that one of the hard disks is failing with bad sectors.  Worked with the OS for atleast for like 1 or 2 hours with basic navigation, browsing and then again in linux it went to full colored screen and then the system shut itself down.  I touched the section to the left of the touchpad and it was warm.  Tried installing windows again using the recovery CD but it crashed out in 10 mins and system shut itself down.  Dont know what next to replace.  Replacing mother board wont make sense as its as good as buying a new laptop itself.  Any inputs is appreciated.
    Thanks.
    Brijesh

    Hi, BrijeshGawande
    Have you tried running the hardware diagnostics from the BIOS?  Multiple failing hard drives sounds like it could be a bad SATA controller.
    I am an HP employee.
    "I'm looking for a laptop that looks like it's wrapped in super-rich, smoothed out tangerine peels." -TheMusicMaker

  • My iMac freezes and sometimes shuts down on its own. Any suggestion on how to fix this? Thanks.

    My iMac freezes and sometimes shuts down on its own. Any suggestion on how to fix this? Thanks.

    Might want to run the Apple Hardware Test just in case.
    Intel-based Macs: Using Apple Hardware Test
    If the hardware checks out ok the startup disk may need repairing.
    Follow the instructions for Using Disk Utility to verify or repair disks

  • Macbook Pro 2010 upgraded from Mavericks to Yosemite keeps shutting down on its own

    I upgraded to OS X Yosemite about a month ago, I have a macbook pro 2010, and in the last two weeks it started shutting down on its own. At first when i'd wake it, the fan would come on loudly and then it would shut down. In the last couple of days, I would make sure all programs were shut when it wasn't in use and then put it to sleep but every time i'd return it would be shut down and need a hard restart. If i just pressed the on button lightly it wouldn't start. And when i turn it on the fan comes on immediately. I'm a publisher so I'm working in indesign and illustrator a lot but I keep a constant look out for my memory and this isn't the problem. I'm working to a deadline here and can't afford to lose my computer for 3 days in the mac store (I live in Barbados) to get it fixed. Any advise?
    Thanks

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select  
    View ▹ Show Log List
    from the menu bar. Post the entire contents of the report—the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report.

  • Mac Mini shutting down while asleep.

    I have frequent problems with my Mac Mini shutting down while asleep. Resetting the SMC doesn't seem to help. SMC firmware is the latest version. Hardware details are:
    Model Name:          Mac mini
      Model Identifier:          Macmini6,2
      Processor Name:          Intel Core i7
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MM61.0106.B03
      SMC Version (system):          2.8f1
    OS X 10.9.1

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign (“$”) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.

  • Beer might have gone into MacBook Pro from the back, shut down on its own 5 minutes later. what to do?

    I'm currently working in Myanmar and no chance to going into a Mac service provider or store. I was using my Macbook Pro (mid 2010) when beer was spilled onto the table. I lifted the computer instantly and as i did not see liquid on the machine and also it had a protective cover i was sure no liquid got in. I removed the cover and it was dry but then 5 minutes later it shut down on its own and it would not turn back on or charge. I left it for an hour or so and then it turned back on and was charging but then since i thought that may be it was because some liquid got in, I turned it off again immediately and disconnected from power source.
    what is the best way to proceed knowing i won't be able to bring it in to a technician anytime soon?

    without on hand diagnostics, nobody can tell you the correct answer on that. No.
    5 minutes later it shut down on its own and it would not turn back on or charge.
    bad news
    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • Is it normal for an ipad to shut down on its own?

    the problem is my ipad suddenly shut down on its own having 70% of the battery charged and it would´t turn on again. i went for help to the mac service on my city, im from mexico, and the guy there just turned it on using the home button and the power button, and said it was normal, it happend to all ipads, iphones and ipods, i did not consider it normal, i own 2 ipads, 1 ipod touch, 1 iphone 3gs, 1 iphone 4, and i know other iphone users that have never had this problem, but the guy just said its normal. so i want to know of he told me the truth.

    It happens occasionally- it's happened to me once (so far) and if you search these forums you will probably find a couple of threads a day from people who have had the same thing.

  • Dv9933 auto shut down on its own

    my dv9933 laptop is about 15 months old. it worked fine until yesterday. Nothing changed configuration wise, the machine started to shut down on its own. I turned it on, it shuts down in 5 to 10 minutes. Sometimes it even shuts down during windows loading stage. The machine is not hot so i don't think it's a over heat issue.
    I had an issue before and don't know if it was related to this one. The machine used to start up on its own. I don't usually shut down the machine and used to put it into sleep mode.  But sometimes it just starts up by itself. This is not a too serious problem but now, i cannot even get the machine start and running. it just keeps shutting down..... any suggestions is appreciated. 
    Thanks. 
    James

    Take it to an Apple Store for evaluation or call Apple support.

  • My iPad air keeps shutting down on its own!

    My iPad air keeps shutting down on its own, and this is the second IPad Air doing this. I really don't want to go trade it in for another. Does anyone have the same issue and is there a way to fix it? And yes I've done the manual reset and computer reset.

    Memory Size & The Impact of 64-bit Applications
    The iPad Air, like the iPhone 5s, ships with 1GB of LPDDR3 memory. Apple frowns upon dissection of review samples but I think it’s a safe bet that we’re not talking about a PoP (Package-on-Package) configuration but rather discrete, external DRAM here. It’s also probably a safe bet that even the iPad mini with Retina Display will ship with 1GB of memory as well.
    Something I didn’t have time to address in my iPhone 5s review was the impact of 64-bit applications on memory usage. I actually ran some tests after the 5s review hit but never got the chance to share the data, so I figured now is as good a time as any to do just that.
    Unlike traditional desktop OSes, iOS doesn’t support paging to disk (or in this case, NAND). Application data can either reside in memory or the associated process is terminated and has to be reloaded the next time you request it. It’s a decision likely made to both maintain user experience and limit the number of program/erase cycles on the internal NAND.
    The good news is that iOS was architected to run on as little hardware as possible and as a result tends to be quite memory efficient. There are also power implications of going to larger memories. The combination of these two things has kept Apple on the conservative side of increasing memory capacity on many iDevices.
    The move to a 64-bit platform however does complicate things a bit. Moving to a larger memory address space increases the size of pointers, which in turn can increase the footprint of 64-bit applications compared to their 32-bit counterparts. So although there’s clearly a performance uplift from app developers recompiling in 64-bit mode (more registers, access to new instructions), there’s also an associated memory footprint penalty. Since the iPad Air and iPhone 5s don’t feature a corresponding increase in memory capacity, I wondered if this might be a problem going forward.
    To find out I monitored total platform memory usage in a couple of scenarios. Before measuring I always manually quit all open apps and performed a hard reset on the device. Note that the data below is reporting both clean and dirty memory, so it’s possible that some of the memory space could be recovered in the event that another process needed it. I hoped to minimize the impact by always working on a cleanly reset platform and only testing one app at a time.
    I looked at memory usage under the following scenarios:
    1) A clean boot with no additional apps open
    2) Running Mobile Safari with 4 tabs open (two AnandTech.com tabs, two Apple.com tabs, all showing the same content)
    3) Infinity Blade 3 (64-bit enabled) sitting at the very first scene once you start the game
    4) iOS Maps in hybrid view with 3D mode enabled, with a WiFi assisted GPS lock on my physical location
    5) Google Maps in the same view, under the same conditions. I threw in this one to have a 32-bit app reference point.
    In general you’re looking at a 20 - 30% increase in memory footprint when dealing with an all 64-bit environment. At worst, the device’s total memory usage never exceeded 60% of what ships with the platform but these are admittedly fairly light use cases. With more apps open, including some doing work in the background, I do see relatively aggressive eviction of apps from memory. The most visible case is when Safari tabs have to be reloaded upon switching to them. Applications being evicted from memory don’t tend to be a huge problem since the A7 can reload them quickly.
    The tricky part is you don’t really need all that much more memory. Unfortunately as with any dual-channel memory architecture, you’re fairly limited in how you can increase memory capacity and still get peak performance. Apple’s only move here would be to go to 2GB, which understandably comes with both power and financial costs. The former is a bigger concern for the iPhone 5s, but on the iPad Air I would’ve expected a transition sooner rather than later.

  • HP officejet pro 8600 Plus shuts down on its own while making numerous copies.

    My printer HP officejet Pro 8600 Plus keeps shutting down if I print or make more than 5 copies then gives me a message to avoid damage shut down the printer with the on button.  Well it shuts down on its own.  

    Hello mb_bernhardt,
    Welcome to the HP Support forums.  I understand that your Officejet Pro 8600 Plus printer is giving you a Printer Failure message and then the printer shuts down.  
    I’ve included the A 'Printer Failure' Message That Might Include an '0x610000f6' or '0x61xxxxxx' Error Code Displays o... document.  If the error message that you’ve received includes an Error code there is one set of instructions to follow, and if there is no Error code  there is another set of instructions to follow.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for

  • User comments in Javadoc

    L.S., Sometimes I feel the need to extend some existing javadoc with a note of my own because sometimes the existing javadoc is not very clear and I am unable to improve because it is from another vendor. I think it would be nice if I could somehow a

  • Badi and Business event( Urgent)

    Hi experts,       I am new to badi and business event 1120P. Please post how this business event exactly comes in to picture in this badi. also how to find this business event? And also Post the logic or code. The requirement is given below . Pls Pos

  • With the latest Firefox, I keep getting error messages on Tumblr, and Flash Player crashes almost every time I watch a video on Tumblr.

    This has been driving me mad for days now. I updated to the latest version of Firefox, but every single time I go to any webpage on Tumblr, (my dashboard, my personal blog, anyone else's blog) I am bombarded by error messages saying "too much recursi

  • Newest Flash Player

    Well you see i downloaded this new version and i dont use flash to put stuff on the internet i use it to veiw the internet i saw some topics over this already and that it is somthing with the internet explorer window. Can someone tell me what i have

  • Connect mac book pro to tv

    What additional cables are neccessary in order to connect a macbook pro to a television?