Mac mini Thunderbolt port

I'm the proud owner of a new Mac mini.
I'm also the proud owner of a pre-Thunderbolt Cinema Display, which works fine with the mini. However, I'd like to add another Cinema display so I will have dual monitors. As a result, I'm wondering if my current moniror will work in a dual-config with a new Thundrbolt display.
Thanks!

The first and most signifigant question is which Mini
do you have? If it is the Mini with the HD3000 graphics,
you can only use one of those displays, period.
If you have the one with the AMD graphics, it would support
two of the new TB displays but various threads across the net
seem to indicate that mixing the non-TB and TB displays can be
problematic.

Similar Messages

Mac mini thunderbolt port stop working

Good night.
First, I apologize for my English.
I have a mac mini (2011 model). Two days ago there was a power outage and the mac shut down. After turning it on, it failed to recognize my TV connected through the Thunderbolt port (with a adapter THUNDERBOLT -> HDMI).
When I disconnect and connect the adapter into the thunderbolt output, the screen flashes (as if he had recognized the second monitor). However, the monitor does not work.
Some Details:
1) In the monitor settings, only the main, connected by HDMI is detected;
2) On the "System Information" screen, the "Thunderbolt" item appears to state “no device connected";
3) I've done the reset PRAM / SMC.
Can anyone help me? Does my thunderbolt output fried?
Thank you,
Mateus.

I would try a different HDMI cable and then a different Thunderbolt/MiniDisplay Port to HDMI adapter.

Lg m197wdp connect to mac via thunderbolt port

trying to connect mac to lg m197wdp connect to mac via thunderbolt port can not find a mac friendly software update and although the mac screen goes blank for a few seconds when TV is turned on the mac doesn't seem to recognise it as there.

Pinging is fine. How would I check the firewalls?
I also noticed this message in the system log:
/usr/libexec/sshd-keygen-wrapper: getnameinfo() only supports IPv4/IPv6. Connection from address family: 5

Daisy chain two display port monitors (Dell U2913WM) to new Mac mini Thunderbolt?

Everything I read said that I could hook up a display port monitor to a Thunderbolt port on the mac mini. I purchased two display port monitors (Dell U2913WM) that can be daisy chained, and hooked them up. All I get is mirroring. Does anyone know how to turn off mirroring with this setup? I did not get the "uncheck mirroring" option in preferences until I hooked up the second via the HDMI port instead of a daisy chain. The problem with that is, I cannot take advantage of the full resolution through the HDMI. It seems I have wasted my money on two monitors.
Looking for advice on:
1) How to daisy chain these two Dell monitors to the mac mini and turn off mirroring and use an extended desktop, or
2) How to take advantage of the full resolution through HDMI port?
Any help would be greatly appreciated.
Thanks!

So re-reading this thread, I now realize you did exactly what I wanted to do but your issue was having a cloned vs. extended desktop. Oops!
I believe your "nothing plugged in" issue is the cable. I'm not sure that TB cables are backwards compatible with DP - I think it's only the ports. Do you see multiple monitors in "System Preferences > Displays" if you hook the monitors up like you described in your OP?
My Dell U2713H arrived today and it works like a charm with the supplied Mini-DP to DP cable. The built-in display on my 13" mid 2009 MBP still works if not in clamshell mode, although I will mostly use mine in my HengeDock. In the OSD of the monitor, you can access "Display Settings > Display Info" and it will show you the DP capability. Mine is only DP 1.1a and I believe to run 2 of these at full resolution you will need the bandwidth in DP 1.2 which includes MST (daisy-chaining). This could be your problem.
Can you access the same menu in your OSD and report back what your DP compatability is?
Thanks!
mgb

New Mac Mini thunderbolt to DVI adapter issues

Hi there,
I'm working on a new studio installation. We have a new Mac Mini that we're trying to connect up to a 30-inch Cinema HD display with DVI input. We have a Kanex C30 Mini DisplayPort to Dual-Link DVI adapter that plugs into the Thunderbolt port and one of the USB ports (for power) on the back of the Mini, but despite our best efforts we aren't getting anything on the display. Going Mac - adapter - display results in about 7/8ths of the screen going white and displaying two green and misshapen Apple logos for about 5 seconds before it goes blank.
Ultimately we want to run it over quite a long DVI cable and currently have an Extron signal booster in place, which works perfectly from the Mac Mini's HDMI output through an HDMI to DVI adapter. However we're already using the HDMI output to feed another monitor.
So two questions really:
1. Can the Mac Mini feed two separate displays of different sizes? The 30-inch over Thunderbolt to DVI and another Apple 24 inch display over HDMI to DVI.
2. Does anybody have any experience with the Kanex or can you recommend an adapter that will work for us?
Any suggestions would be greatly appreciated. This whole process has been a very long headache!
Many thanks,
Josh

Hi Josh,
It should work, but not Mirrored of course, just Extended Display...
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system. Also see: What type of video system is provided by the Aluminum Mac mini models? Which are integrated and which are dedicated? Can the video be upgraded?
Standard VRAM:
512 MB*
Maximum VRAM:
768 MB*
Display Support:
Dual Displays
Resolution Support:
1920x1200*
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

Asus vh232h out of range, Mac mini thunderbolt to vga

Hey guys,
Pretty much what the title says.....
Mac mini
Asus vh232h (VGA only, no dvi socket)
Thunderbolt to VGA adapter
VGA cable (I've tried several)
(Benq monitor running fine on the hdmi port)
In short, if I use a VGA cable under 1.8m, there's no problem.
If I use a cable of 3m in length, or two x 1.8m cables, I get a "Out of range" message on the monitor.
(My office is shared space, so I need the Mac mini to be inside a lockable cupboard. That means I need a cable longer than 1.8m)
FYI, I don't seem to be able to set the asus monitor resolution in Mac settings (not sure if it can be done when monitor is 'out of range', but I can see the Asus in Display settings, Arrangement. It looks about half the width and height of the benq.
Is a monitor supposed to connect successfully over a 3 m cable?
Will a thunderbolt to dvi adapter work? (Would have to buy new monitor)
Any other ideas?
Thanks,
Darren

Bought a new benq 24" monitor, moshi mini display port to hdmi adapter, and 5m hdmi cable.
Sorted.
Must be an issue with apple mdp to VGA adapter when using VGA cables over 1.8m long.

Mac mini, thunderbolt and two monitors

Hi all,
I have a late 2012 Mac Mini, and a 27" LED Cinema display. I want to connect two monitors to the mini. I was thinking about buying a 27" Thunderbolt display to connect via the Thunderbolt port, then daisy chaining the LED Cinema (via mini-DP) to the Thunderbolt display. Will this work?
Any other suggestions would be welcomed as well.
Thanks.
John

Does your comment mean that you use the Thunderbolt disk drive inbetween LED cinema display and the Thunderbolt display ie. you plug the MDP cable coming out of the LED display into the TB drive, and then use the other TB port on the drive to plug into the Thunderbolt display?? I assume then into the computers TB port..?
Yes.
A couple of things if I'm getting this right...does this mean the drive is useless as a drive and is rather just acting as a hub?? I'm assuming this because there are no ports left on the drive to actually plug it into the computer
The drive will work. It gets its data connection to the computer through the Thunderbolt display's connection.
2nd I've heard that a thunderbolt port can only support 1 MDP device in it's chain, and it is has to be last in the chain before connection?? Does this not cause a problem? Having said that I have my 24" LED apple display connected through a TB drive and it is the drive that connects last and works fine (after I updated the displays frimware to stop the flicker it caused).
What do you mean by "before connection"? The MDP device is the last in the chain, not the disk drive.

Can I run VGA monitor from Mac Mini HDMI port?

Hi:
I have a Mac Mini with one HDMI port and one Thunderbolt port. I have a Thunderbolt-only audio interface, so I need to connect my monitor to the HDMI port.
I bought an HDMI to VGA adapter cable for this purpose, but when I connect the monitor (Acer x233hz), all I get is a "No Signal Present" error message.
Is there a setting I can change in order to use the hardware I have, or do I have to find another solution?
Thanks!

You need an HDMI to VGA converter, not an adopter. Since the HDMI signal is digital only you need to convert that to analogue. You need somnethging like this
http://www.newegg.com/Product/Product.aspx?Item=N82E16812270492&nm_mc=EMC-IGNEFL 072414&cm_mmc=EMC-IGNEFL072414-_-EMC-072414-Index-_-AudioVideoSplitters-_-122704 92-L022C
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16812699001&nm_mc=EMC-IGNEFL 070414&cm_mmc=EMC-IGNEFL070414-_-EMC-070414-Index-_-AudioVideoSplitters-_-126990 01-L019B

2011 mini-thunderbolt port to monitor not working

I have a 2011 i5 Mini which I am using as a media server - hdmi port to my tv and the Thunderbolt port to my 1920x1080 monitor. The problem is with the Thunderbolt port.
I understood that I could use a Mini Displayport (MDP) adapter and go to the monitor either as VGA or DVI. Hooked up the MDP-VGA adapter and all was good for the last couple of weeks: both the monitor and the TV works and the monitor also worked fine with the TV off.
However, today, the monitor wouldn't show a signal. Figuring it was the cheap monitor, it pulled it and hooked it to a 2010 mini and it worked correctly with dvi and vga. Put it back on the 2011 Mini and tried a MDP-DVI adapter, but no joy. Image came on the monitor for perhaps 2 seconds and then disolved to just white noise. Re-booted with same result.
Pulled the HDMI cable that was going to the TV and used the supplied HDMI to DVI adapter to the monitor and it now works, but now I can't use the TV.
I am assuming that this is a trip to the Apple store for warranty work unless anyone has an idea to try. BTW, the 2011 MIni is fully up to date according to Software Update.
Thanks, all.
Peter

Solved the problem with a new dvi to mini-display port cable from amazon. My 2 adapters must be bad.
Peter

Running 10.6.8 on mac mini. ethernet port quick. I can not print using wireless

Can not print using wireless. It printed fine using ethernet
Running 10.6.8 on mac mini. Ethernet port has quit. (lighting strike I think, it fried two routers, did not get anything else)

Nothing to go on here.
Do you have a wifi capable printer? If so, what model? What happens when you try to set it up?

HD Audio Pass Through on Mac Mini HDMI port

There have been various threads realting to this but nothin up to date or resolved as i can determine. I plan to use a Mac Mini as the core AV processor in a high end 8 channel sound system in a home cinema set up. The mac mini runing XBMC or similar will need to process high definitiion video files that contain Dolby and DTS True HD 8 channels bit streams and be able to pass these streams unchanged and uncompressed to the HDMI port for external decoding.
In previous threads it was identified that there was a hardware and/or OSX operating system limitation that prevented this. Has this now been solved? It seems surprising that Apple of all people would get this one wrong. As I have not yet purchased the Mac mini then i am not in a position to experiment as my 2010 macbook probably is not the same hardware.
Thanks

I know this thread is a little old now, but I've been wondering the same thing myself - so I googled it and came up with this thread.
I've just bought a new 7.1 Amp, the Yamaha RXV677 from Richer Sounds. It handles DTS-HD Master Audio 7.1 and Dolby TrueHD 7.1. Up until now I've not been able to try this sound format out as my current 2009 Mac Mini only sends audio through the Optical Out, so the best I can get is Dolby Digital 5.1 pass thru via S/PDIF. I was quite happy with this arrangement, until I get around to buying a blu-ray player. However, I realised my work laptop is a 2014 MacBook Pro with HDMI out. Therefore out of curiosity I decided to download a couple of HD demos from demo-world.eu that have DTS-HD MA 7.1 audio tracks embedded in them. I tried opening them up in VLC media player (version 2.1.5) and hooked up my 2014 MacBook Pro via HDMI to my Amp. To my amazement it worked!! - I got glorious 7.1 DTS-MA into my Amp, and it sounded simply stunning!! In VLC I had two HDMI audio devices to choose from 'HDMI' and 'Encoded HDMI' (or something like that - I'll have to hook it up again to be sure). When using straight HDMI output, my Amp read it as 'PCM Audio' but when using 'Encoded HDMI' it read it as 7.1 DTS Audio giving the sample rate and bit rate. I need to spend a bit more time testing this out - but it definitely works, and it definitely plays in surround from all my available speakers (I have a 5.1 setup, so can't test the other 2 surround channels).
I have no reason to believe that this will not work from a current Mac Mini with HDMI - although as yet I can't verify this, and I have only tested using VLC player with a .m2ts file.

Mac Mini Ethernet port gone bad, doesn't show in network preferance pane?

My friend 's Mac Mini was doing fine then he shutdown disconnected everything and brought it over to my house for LAN games. He then couldn't get online through my router. I told him go to his network pane to see what kind of error it was giving, cable errors IP but no internet...etc, and only internal modem was displayed in the list. So I immediately went to his port setting and ethernet was checkmarked. So then I thought well maybe some PMU reset problem so I tried the resets and still not present from the network pane. So then I hooked my external hd to his firewire as a startup drive to eliminate that it just wasn't a software problem and it is still not showing up on network pane. I then skimmed through some online articles and things but to no avail. I just was thinking it was a 5 minute drive from his house to here and he said didn't do anything different from the other times he was here but something must have jarred it or perhaps just a coinseidense that the ethernet port went out when he was coming over. And to top it off he had made arrange for next weekend to sell it to a friend and get a new Intel iMac, which right now has to be put on the backburner until he has a working unit again. Applecare is up so that is out of the question. Any suggestion out there would be appreciated. Or is it just beyond easy fixes and has to either be repaired or keep and save from scratch for a new one?

OMG, guys I feel so dumb the new update to Tiger changed the way network pane worked so that was the whole problem its normal under 10.4.5 so plugged in a good cable and it came up fine go figure right. For being Apple certified for repair I sure looked past such an easy solution.

Mac mini microphone port

So I tried to use a labtec mic on my mac mini and it does not work. Then I look thru this forum and all I can find is I have to buy a USB mic.So what is the point of Apple putting the mic port on the mini if one can only use a USB mic???? Is it just for pro's
If a mic can be used on the rear port can any one please tell me what type/brand I have to buy. Cos I have got USB cables coming out the ying yang.
intel mac mini Mac OS X (10.4.8) newer tech 300GB external hard drive

You would probably be better off buying a USB mic if you have to buy one anyways, since the sound is switched from analog to digital outside of the computer, and therefore avoids all the interference inside the case.
You will get much better sound quality out of a USB mic vs similarly priced analog.

Mac Mini Thunderbolt 1920x1080

I've got a Acer x243H Monitor. I put it in my Mac Mini with a thunderbolt adapter, But it can reach the resolution of 1920x1080. I've got two black lines on the left and the right.. Who can help me?
Kind regards,
Collin

When ypu say that it can't reach 1920x1080, do you mean
it is not a selection in System Preferences->Display or is
it that the monitor is just not diplaying properly?
I don't know what it is called in Acer monitors, but every
monitor/TV usually has a menu item somewhere to force
the monitor to fit the incoming image to the screen. Try
to find this function in your monitor's set up menus and
enable it.
If you can't select 1920x1080 from the mini, then that is something
different.

Mac Mini HDMI port broken?

I have a Mac Mini Mid 2010 that has been acting as a media center / small file server. It's been running Plex, FTP and VPN services. It has been hooked up to a Pioneer VSX-921 receiver with a HDMI cable since day one, and it's been working beautiful.
Then yesterday evening, switching to the input of the Mac Mini, I got "no signal". I double checked all connections, made sure the computer was actually running using remote desktop. Everything seems fine. I switched the HDMI cable with an Apple TV i have in my bench as well, the cable is fine.
So I went looking for problems on the Mac Mini. Under displays, I no longer have any HDMI option for output. Same with audio. It's as if the computer simply doesn't have an HDMI port any more. I've tried the classics PRAM, NRAM and SMC. I've checked for updates. Nothing so far.
I'm slowly coming to realise maybe my motherboard has gone bust. As the computer is over two years old, it's well beyond Apple warranty, and it's a month over the extra year long european consumer law, so I'm not expecting to get much help from Apple. Especially since I've installed my own SSD in the Mac Mini. That was done in the first few weeks, and everything has been fine for two years since then, so I do not believe that matters. But they will.
So, before I do anything else, like consider reinstalling the computer, getting a new motherboard, throwing it out or buying a new one. Is there anything else I should be checking before proceeding?

Further testing shows the Mini DisplayPort doesn't work either. It shows an extremely grainy (in a digital way) white with the Apple logo on boot, but then stops sending signal. So basically the only way for me to access the computer is via remote desktop, which also makes it impossible for me to re-install the computer. Worste case, I'm locking myself out of my own computer.
I'm quite convinced the motherboard is to blame at this point. Weird how it can just break like that. Nothing was changed, no cables touched, the computer hasn't moved for 24 months. Damnit.

Mac mini Thunderbolt port

Similar Messages

Maybe you are looking for