Mac Mini to new iMac via FireWire (9-pin to 6-pin cable necessary?)

I can't seem to find a straight answer on this.
Am I correct in assuming that the only FireWire cable that can be used to connect a Mac Mini to a new iMac is a 9-pin to 6-pin cable such as http://store.apple.com/us/product/TP320LL/A?mco=MzE2OTkyOA ?
6-pin cables won't fit in the new iMac? I don't have the iMac yet so I can't check.
Thanks,

Or you can just get an adapter and use your existing FireWire 400 cable.
http://eshop.macsales.com/item/Other%20World%20Computing/FIR1369AD/
Or you can use a standard Ethernet cable and use +Fire Sharing+. Both your Macs would have gigabit Ethernet ports, so as long as the cable is Cat-5e or better, it would be pretty fast.

Similar Messages

  • Transferring Data from old iMac to new iMac via Firewire

    I am having difficulty transferring data from my old iMac to my new iMac via firewire. Per the instructions contained in migration assistant, when I hold down the letter "T" key during startup of the "old" mac the firewire symbol does not appear. Given that the firewire symbol does not appear I am unable to proceed with the transfer. Of note, my new Mac is the '09 24" iMac and my old iMac is the early 2006 model with the 17" screen. Incidentally, I am using the following cable contained in the attached link along with the adaptor (400) with respect to my old iMac.
    http://www.bestbuy.com/site/olspage.jsp?skuId=8846387&st=firewire&lp=10&type=pro duct&cp=1&id=1215819175946
    Can anyone help?

    Hi Todd
    Not sure why that wouldn't work, but it could be that cable and adapter setup as the Early Core Duo only supports firewire 400.
    You should try a 9 to 6 Pin Bilingual FireWire Cable:
    http://www.monoprice.com/products/product.asp?cid=103&cp_id=10301&cs_id=1030105&pid=3542&seq=1&format=2
    http://www.firefold.com/6-Foot-9pin-6pin-IEEE1394B-Firewire-Cable-P965.aspx
    Dennis

  • IMac to new iMac via Firewire---Hung up at 34 minutes for 8 hours

    I have a 2007 iMac connected to my new 27" iMac via Firewire 800->400 cable. It seems to have gone fine, for awhile. Now it's stuck at 34 minutes remaining for over 8 hours.
    Do I let it keep going?
    If not, how do I stop it and start over? Won't the new machine have some of the files already transferred? I'd like to start clean again.
    Please help! Missing work here.....
    Steve

    It's possible one of the Macs went to sleep.
    It's also possible there's a problem on the old Mac's internal HD. Verify it, per #6 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html] (or use the link in *User Tips* at the top of the +Using Snow Leopard+ forum).
    Do you have either Time Machine or "clone" backups of the old Mac, on an external HD? If so, it's a bit easier to plug that in to the new one and transfer from it. Start with the "Second Chance" in the green box of [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum).

  • Moving ALL files from an old iMac to a new iMac, via Firewire...

    After hooking up my old iMac (2 years old) to a brand new one, via firewire, and checking every box to copy, it didn't copy my iTunes or iPhoto libraries to the new computer. Does this have to be done with DVDs, or through an iPod?
    Only applications, Logic, photoshop etc. copied onto the new iMac.

    Moving iTunes folder
    http://support.apple.com/kb/HT1449
    Moving iPhoto
    http://support.apple.com/kb/HT1229

  • Migratiing files from a MacBook Pro to a new iMac via firewire connection

    The firewire connection does not appear to work between my older MacBook Pro running 10.4.11 and my new iMac running 10.5.6. I've been trying to use migration assistant and it never gets passed "waiting for old mac to restart". I 've put the target macbook pro into target disk mode by pressing "t" at startup and then using system preferences, start up disk, start disk in target mode. It appears that the iMac just can't see the older mac. Any suggestions to trouble shoot? Very little info on apple's support documentation. I have over 90 GB of data (music, files, photos). I can do this over a network connection but it will take 30 hours just to copy my itunes library.

    I would start by doing the following on the MBP:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, turn off both computers. Connect via a Firewire cable. Boot the MBP into TDM. Wait for the TDM screen to appear. Now boot the iMac normally. See if the disk drive of the MBP doesn't appear on the iMac's Desktop.

  • Transferring files from MacBook Pro to new iMac via Firewire

    Hi guys
    My MacBook Pro is seriously on its way out and I would like to transfer my music files, work documents, photographs, videos etc. onto my brand new iMac and the best way to do this I would think would be to link the two up via Firewire. The MacBook Pro is no longer accepting my external hard drive and fails during during DVD's, so those options are out.
    So I was wondering if someone could advise me on what type of Firewire cable to get. As far as I'm aware I didn't get one with either the MacBook Pro or the new iMac, so I think a purchase is necessary however, I've spotted that there are different kinds with different ends, some which have 6-pin, 8-pin and 9-pin and I have no idea what to get. Could someone advise me on what would be the best item to get for this situation?
    My MacBook Pro is one that was the model before the black keyboards came back in, and the iMac is the brand new one at 21".
    Thanks for your help guys.
    Steve.

    Hi
    FireWire 800 / FW800 / IEEE 1394b uses a 9-pin connector for both the imac and the macbook pro.
    good luck.
    M.

  • Mac mini display is flicking via HDMI to DVI adapter and DVI cable

    i have received mac mini server (mid 2011) recently. mac mini is connecting the display via HDMI port using DVI cable with a HDMI to DVI adapter.
    the display shows constant flicking. white dots/lines show randomly. it is like those signal noise when watching analog TV.
    the same display works fine and well with macbook pro (early 2008) via DVI port.
    please help. please advise.

    So you know the display is working.
    It seems to me you have a few possible problems.
    1 HDMI-DVI cable is bad
    2 DVI-cable is bad
    3 Connections between cables or computer or monitor are bad.
    4 HDMI port on the computer is bad.
    I assume you've tried #3, and re-connected cables and wiggled inputs.  So then try replacing 1 and then replacing 2 which are cheaper fixes than replacing/fixing 4.........
    FYI, I'm connect my mac mini using the same setup you describe, with no issues....also inspect the cable ends carefully to look for any problems.
    jb

  • Moving files from old Mac to new one, via Firewire

    I have an old G4, and recently bought a new iMac. I'm trying to transfer the files from my old computer to the new one via firewire (and I've also tried via ethernet cable). The G4 has two hard drives, one with system files, the other just used for data. When I connect the Macs by Firewire, with the G4 in Target mode, the iMac only recognizes the data hard drive. Is there a reason that anybody can think of why the system drive wouldn't show up?

    FireWire Target Disk mode only connects to the master ATA drive on the ATA 0 bus; if there's nothing at that location, the computer will shut down instead.
    (33779)

  • I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    I have a mac book pro and i have connected my panasonic mini dv video camera via firewire 9 to 4 pin connector but imovie doesnt recognize. please help.

    Hello twrate,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iMovie '11: If iMovie doesn’t recognize your camcorder
    http://support.apple.com/kb/PH2146
    Best of luck,
    Mario

  • HT5219 can i connect my dv camera to my new imac via thunderbolt firewire adaptor

    can i connect my dv camera to my new imac via thunderbolt firewire adaptor

    If FW is the only connection the camera has then yes Thunderbolt Firewire adapter is correct. It's available from a number of sources including Apples own online store, in the USA the link would be:
    http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r

  • Hooking a new Mac mini onto my iMac

    Hi there kind people!
    i'm pretty sure there are several discussions out there considering the possibility to hook a new Mac mini on to iMacs. However mine is pretty specific, so I'd though to give it a go and just spit out!
    I'm considering buying a new Mac mini. However I don't like the idea of buying a new monitor, because I've got an 24" iMac standing on my desk. Is it possible to use the iMac as a monitor for the Mac mini and what would it require?
    I've got a 24-inch iMac, from the beginning of 2009. It is, of course, running on OS X Lion.
    I hope you people can help me out!
    Thanks a bunch and have a splendid day!
    Greetings,
    HarmenSimon

    Try Air Display it will allow you to do what you want.

  • I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on external drive.  I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive.  Is this going be a problem?

    I am migrating to a new iMac via TimeMachine back up.  My iPhoto libraries are on an external drive.  Both drives are backed up on Time Machine.  I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac.  This would save having to transfer several hundred GBs of data.  Will this work using Set Up Assistant?

    Your user account on the new Mac must have a different UID than on the old one.  See the pink box in Problems after using Migration Assistant for an explanation.
    You'll need to change the permissions on the iPhoto library on the external HD.  Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password. 
    Then click the plus sign, select the user account you want on the next screen, and click Select.   Then change Read only to Read & Write for that user via the little arrows.  Finally, click the "gear" icon and select Apply to enclosed items.  That may take a few mintutes on a large library.

  • Migration Assistant and best cables to trans. info from a Mac G4 to new iMac?

    Baest Cables to use with Migration Assistant from a Mac G4 to new imac?

    No you can not use a direct USB to USB connection. You can however use a USB External Hard Drive and copy your music, photos and other files from the G4 to the External Hard Drive, then from the External Hard Drive to the new iMac.
    The best option is FireWire, followed by using an External Hard Drive, then an Ethernet connection to migration from the G4.
    See > Mac OS X v10.6: How to use Migration Assistant to transfer files from another Mac

  • How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant.  The files show up on the new MacBook but cannot be opened.  Thanks!

    How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant?  The files show up on the new MacBook but cannot be opened.  Thanks!

    Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.

  • Migrate from minimac (G4) to new iMac via airport extreme

    I have a brand new iMac and I have the latest airport extreme.
    I have my old miniMac and all are linked up through the Airport Extreme.
    I want to transfer all of my old files from my G4 miniMac to my new iMac but the Migration Assistant says I have to use (buy) a firewire cable.
    How do I transfer my files from my old computer (miniMac) to the new iMac via airport extreme?

    sorry to say but its the firewire technique which Migration Asst. uses. It does not migrate over Ethernet.. its actually very simple...
    you put your G4 into target disk mode. You put the iMac into migration asst., attach the cable and the migration (file copying) begins after you chose to proceed.
    The reality is firewire is faster than most standard ethernet anyway... and wireless? it would take an extraordinary amount of time.
    Will
    Message was edited by: Willard Kramer

Maybe you are looking for