Mac Mini Upgrade to Leopard

I have a mac mini on tiger at the moment, and have the leopard install discs from a macbook pro, one of which is the macbook pro driver CD (which I obviously would not use)
My question is do I need a driver disk for the mac mini, or can I just install leopard on it with the CD and it will be ok? Can't seem to find this anywhere on the internet, and I would've naturally thought I would require a driver CD, but others have said you don't need one to upgrade to leopard...
Thanks in advance

Sure, I understand that I can't use the leopard one I have - Thanks
But what I mean, is that there is a driver CD also given with the leopard disk for the macbook pro, so you can install the drivers afterwards - my question is, how does this work with the Mac Mini if I used the retail version of OS X 10.5, - do I need a drivers CD like you get with a mac computer when you buy it to install Leopard to the mac mini, or can you purely JUST install leopard retail and it will work?

Similar Messages

Can the new Mac Mini boot Snow Leopard from an external hard drive?

I currently boot my 2009 Mac Mini from a FW800 external drive with 10.6.8. If I just plug my external drive into a new 2011 Mac Mini, will it boot into Snow Leopard if I set it as the startup disk or will I get a kernel panic?

I bought a 2011 Mac Mini, which came with Lion installed. I thought maybe I could repartition it and have a Snow Leopard partition. So I repartitioned it (500gb split into two 250gb partitions). I named the new partition "SnowLeopard" just to make it easy for me to tell the difference.
I attached the external DVD and put in a Snow Leopard installer disc, holding down the C key so it would boot and install from that, but it just spun for awhile. Doesn't appear to work.
Then I read somewhere else that someone had managed to clone a copy of Snow Leopard onto an external drive and boot from that. In their situation they were talking about a MacBook, but the principle seemed sane.
So I rebooted, holding down the T key to put the Mac Mini into Target hard disk mode, and attached it via Firewire to another MacMini (circa 2008 or so, not sure of year, but it was upgraded last year to Snow Leopard and has been upgraded along and along). Then I used Carbon Copy Cloner to copy Snow Leopard (that is, the entire hard disk-- System and all applications and data) to my newer Mac Mini's "snow leopard" partition.
For yucks, when it was done cloning, I restarted the older Mac Mini, and had it boot from the newer Mac Mini's snow leopard partition--- it worked! To make it easy to tell the difference, I changed the desktop background to something completely different. I think I tried booting from Lion but I can't remember if that worked.
Then I rebooted the newer Mac Mini, which booted up in Lion, of course. Going into System Settings, I changed the startup disk to the "snow leopard" partition, and rebooted, and it booted up in Snow Leopard.
I have yet to test the applications on the Snow Leopard partition. Another problem has arisen.
Because with both of the Mac MInis being active on the network, they both had the same computer and user name. So I renamed the newer Mac Mini to something completely different, and changed the password.
Unfortunately, now I cannot change any other setting in the System Settings that requires a password. While the newer Snow Leopard lets me log in with the new user and new password, whenever I try to click the "lock" icon to change something, I'm prompted for a username and password. Apparently this is some different username and password than either the new or old username/password.
I've tried various combinations of both: new user/old password, old user/new password, old user/old password, etc.
So if you do what I've done, be careful about changing the username and password on your cloned computer. I think it may be wiser to create a new user and then delete the old cloned users. I may just have to re-clone the old Mac Mini to the new one again.
If anyone has any ideas about this password conundrum, please pass along!

Mac Mini Upgrade to Lion with USB: can't download Server Add On

I have a Mac Mini on Snow Leopard and I bought the Lion USB key to upgrade to Lion. I have a weak internet connection. Unfortunately, the first thing that happens when I insert the USB key and start the upgrade is that it needs to download the Server Add On. What is very bad is that it says to look on the App Store app to monitor the download but there is nothing happening here. My ADSL box shows no activity. Why do I have to download this? how many Mb is it? can I skip it somehow? If I cancel, it cancels the installation...
I am very disappointed and unhappy by this, I thought I would upgrade to Lion easily, especially after buying the USB key for 69 euros (I live in France).

annmamac wrote:
The only solution I found is wipe the hard drive, install Lion then install the server part. I am not really interested in a drastic solution as this one which takes time and careful backup and is stressful.
At the very least, were I upgrading like you, I'd clone what I have to an external -- either bootable or in a disk image -- in case you need to roll back.
I've never upgraded any version of Server before, but that drastic measure I take all the time with major OS upgrades. And Snow Leopard to Lion is a major OS upgrade.
It's too bad that Apple doesn't make a straight Lion Server OS "bundle" available for purchase for the price of Lion client + server add on. That way you wouldn't have to do a two-step install to get to Lion Server. It certainly exists, I've downloaded it for my Mac Mini Server, which shipped with Lion Server, when I wanted to reinstall Lion Server.

Mac mini and Snow leopard wireless problems

Hi,
I got mac mini running snow leopard to our office from another branch, this is recently brought mac mini with snow leopard installed,
But the problem is I cannot connect to internet using wireless connections. Reading other posts i found out that there is a snow leopard issues with connecting to wireless network, but this problem seems to unique. When i connect to wireless network it shows me that, mac mini is connected to wireless network but doesn't take ip address from dhcp , its show some self assigned ip which is 169.254.226.163, but my network address are 192.168.1.*, ethernet works fines,but in wireless even when i gave manual ip , it connect but i cannot connect to internet neither i can ping to router.
I tried various methods suggests in forms, like deleting network preference files in /Library/Preferences and ~/Library/Preferences and also deleting network connection and adding new one, even updating to 10.6.3 but nothing works for me,
My macbook nicely connected to wireless and get ip, even PC connect nicely this issue is only with Mac mini
Could have suggest me how can i fixed this, Thank you very much,
Best Regards,
Waruna.
Message was edited by: warunacds

Thanks DaddyPaycheck for your initial response. Before I jump onto the phone with Comcast couple of questions that I have for clarification purposes:
1) Are you implying that I must link my blabla.com address to that static IP address through my Domain Provider? See following example:
Record Type Record Host Record Answer TTL
A *.blablat.com >>Static IP<< 300
2) The current IP I have been given 60.172.151.254, why is that not static or how do you know it is not static?
3) When executing the command host in terminal for this IP address it returns the following: c-60-172-151-254.hsdl.co.comcast.net which coincidentally is the same as primary DNS it recommended during the initial configuration of the Mini Server. What does this mean? When I enter this in Safari it results in 'Safari can't connect to server'.
4) Executing the same command for my domain name 'blabla.com' it results in my 'internal' IP address '1.0.10.9'.
Thanks in advance for any clarification you can provide,
Tiest.

How do I find what taking up all my hardrive space on my mac mini running snow leopard ?

How do I find what taking up all my hardrive space on my mac mini running snow leopard ?

Hi Gibby,
How much free space is on the HD, where has all the space gone?
OmniDiskSweeper is likely the easiest/best, and is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
And if needed, you can use Terminal to run it in admin mode to see files/folders your user can't see...
http://www.macobserver.com/tmo/article/how_to_recover_missing_hard_drive_space/

Wiki Server support on Mac Mini with Snow Leopard?

Hi
I am considering buying Mac Mini with Snow Leopard server. Before that, I want to know about wiki server 2 capabilities. Wiki Server 2 page says following:
"Mac OS X Server makes it easy for groups to collaborate and communicate through their own wiki-powered intranet website complete with group calendar, blog, and mailing list"
I am planning to setup wiki server for a small group of users over Internet (and not intranet) to exchange information and so it should look something like wiki.mydomain.com with login capabilities for user(and again, this is over internet).
My Question: Can wiki server 2 work with web server to support above (or similar) setup?
If not, what can be done to support above setup?
Response appreciated.
Thanks in Advance.

Michael Maslen wrote:
Jason, what is your source of information that this is a supported configuration?
I work at Apple. Thats why I have the !http://discussions.apple.com/images/status/apple_employee-16x16.gif! logo below my username.
The new Mac mini comes in three different configurations, two of those have the standard version of Snow Leopard.
There is an article that addresses issues similar to this here: http://support.apple.com/kb/HT2186, but switching from Snow Leopard Server to Snow Leopard is not like trying to install Tiger when the Mac mini came with Snow Leopard.
You can also verify this by contacting an Apple specialist at: 1-800-MY-APPLE or call U.S. iPod and Mac technical support at: 1-800-APL-CARE (1-800-275-2273).
-Jason

Why does mac mini with snow leopard download skype for windows instead of mac

why does mac mini with snow leopard download skype for windows instead of mac ?

Are you using this link?
http://www.skype.com/en/download-skype/skype-for-mac/

I had a mac mini on snow leopard but it broke.I now have a macbook pro on leopard how do I upgrade using the disks from my old mac mini

can I use the osx disks from my old mac mini to upgrade my macbook pro so i can then get a further free upgrade

You can not use a DVD that shipped with one Mac to load on to another. To upgrade to Snow Leopard you will need to purchase the Snow Leopard DVD.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

How can I find out if my mac mini running snow leopard can be upgraded to mountain lion?

I have a mac mini with sufficient ram for the mountain lion OS however, I am unable to determine if the machine was created in early 2009. Is there a way to make sure my machine will take the upgrade without purchasing the operating system first?

Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

How do I upgrade my Mac Mini running Snow Leopard to Mountain Lion? Thanks

I have a Mac Mini running Snow leapard. I believe i can update it to Mountain Lion but have read I have to first update it to Lion. This is where Im struggling. How do I get a copy of Lion as I cant download it as there is not an App Store on Snow Leapard.
Any help would be great!

Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.
Be sure your computer meets the minimum requirements:
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer)
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
3. MacBook Pro (Mid/Late 2007 or newer)
4. MacBook Air (Late 2008 or newer)
5. Mac mini (Early 2009 or newer)
6. Mac Pro (Early 2008 or newer)
7. Xserve (Early 2009)
Are my applications compatible?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
Am I eligible for the free upgrade?
See Apple - Free OS X Mountain Lion upgrade Program.
For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.
Model Eligibility for Snow Leopard and Lion.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.

How to upgrade Mac mini server Snow Leopard to Mountain Lion

Trying to upgrade Mac mini server running Snow Leopard to Mountain Lion. I downloaded Mountain Lion and about to install but a warning prompt tells me server functionality will be lost until server.app is applied. What is involved in doing that?

What's involved? Buy and load OS X Server; that's now a Mac App Store app.
That'll get you Server.app.
Server.app is the GUI tool that is used to manage recent versions of OS X Server, along with (increasingly) the command line management of the features that are not exposed through the Server.app tool.

2005 mac mini on OSX leopard will not boot up from firewire disk

I have an old mac mini that my son still uses and the super dirve does not work any more. But now the main hard disk needs to some attention from Disk Utility. So I need to boot up from the Leopard install DVD. But of course the DVD dirve does not work so how to do this? I have tried to create a bootable disk by restoring the install DVD to a partition on a firewire drive and this is seen as a bootable drive by my 2008 iMac, but not by the Mac Mini. So is it possible to boot up rom a irewire drive? USB doesn't work either

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

Mac Mini w/ Snow Leopard hibernating when it shouldn't

Hi, two Snow Leopard bugs to report:
1. I've got a Mac Mini (from ~early 08) which I've recently upgraded to Snow Leopard. I've got the Energy Saver control panel set to never allow the machine to go to sleep or to sleep the display. However, I hear the machine going into hibernation sometimes when it should be just idling in the Finder. I've snipped out the useful part of my system.log that shows the machine going to sleep and then waking back up when I hit a key:
Oct 21 14:44:26 macmini loginwindow[42]: loginwindow SleepWakeCallback WILL sleep
Oct 21 14:44:26 macmini mDNSResponder[18]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 1 failed CFDateRef start 00000000 CFDataRef lease 00000000 CFDataGetLength(lease) 0
Oct 21 14:44:26 macmini kernel[0]: AFPSleepWakeHandler: going to sleep
Oct 21 16:44:28 macmini configd[14]: setting hostname to "macmini.local"
Oct 21 16:44:28 macmini configd[14]: network configuration changed.
Oct 21 16:44:29 macmini com.apple.launchctl.Background[503]: launchctl: missing the Label key: /System/Library/LaunchAgents/com.apple.RemoteUI.plist
Oct 21 16:44:31 macmini configd[14]: network configuration changed.
Oct 21 16:44:34 macmini configd[14]: setting hostname to "macmini"
Oct 21 16:44:34 macmini mDNSResponder[18]: 73: Could not write data to client because of error - aborting connection
Oct 21 16:44:34 macmini mDNSResponder[18]: 73: DNSServiceQueryRecord MacMini-FF.daap.tcp.local. (TXT)
Oct 21 16:44:42 macmini mDNSResponder[18]: DHCPWakeTime: SCDynamicStoreCopyDHCPInfo index 1 failed CFDateRef start 00000000 CFDataRef lease 00000000 CFDataGetLength(lease) 0
Oct 21 16:44:42 macmini configd[14]: PMConnection mDNSResponder com.apple.powermanagement.applicationresponse.slowresponse 12965 ms
Oct 21 16:45:22 macmini loginwindow[42]: loginwindow SleepWakeCallback will power on, Currenttime:10/21/2009 4:45:22.003 PM - Waketime:10/21/2009 4:45:22.000 PM = Deltatime:0.002678037
Oct 21 16:45:22 macmini configd[14]: setting hostname to "macmini.local"
Oct 21 16:45:24 macmini configd[14]: Sleep: Success - AC - Maintenance Sleep
Oct 21 16:45:24 macmini configd[14]: Wake: Success - AC - USB4
Oct 21 16:45:24 macmini configd[14]: Hibernate Statistics
Oct 21 16:45:24 macmini configd[14]: Kernel configd com.apple.powermanagement.applicationresponse.slowresponse 13286 ms
Oct 21 16:45:24 macmini kernel[0]: AFPSleepWakeHandler: waking up
Oct 21 16:45:24 macmini configd[14]: network configuration changed.
Oct 21 16:45:25 macmini KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
Oct 21 16:45:25 macmini KernelEventAgent[43]: tid 00000000 type 'afpfs', mounted on '/Volumes/shared', from 'afp_4y9fiL4y9fiL4y9fiL4y9fiL-3.2e000003', not responding
Oct 21 16:45:25 macmini KernelEventAgent[43]: tid 00000000 found 1 filesystem(s) with problem(s)
Oct 21 16:45:27 macmini configd[14]: network configuration changed.
Oct 21 16:45:27 macmini mDNSResponder[18]: Note: RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:0216:CBFF:FEAC:31E3); network traffic reduction measures in effect
Oct 21 16:45:27 macmini mDNSResponder[18]: Note: RegisterInterface: Frequent transitions for interface en0 (192.168.0.7); network traffic reduction measures in effect
Oct 21 16:45:30 macmini configd[14]: setting hostname to "macmini"
Oct 21 16:45:30 macmini KernelEventAgent[43]: tid 00000000 received event(s) VQ_NOTRESP (1)
Oct 21 16:45:31 macmini kernel[0]: Secondary Reconnect succeeded /Volumes/shared
Oct 21 16:45:52 macmini loginwindow[42]: no spins reported for this wake
Oct 21 16:48:27 macmini com.apple.WebKit.PluginAgent[541]: Debugger() was called!
I confirmed that I have all the auto-sleep/hibernate stuff disabled:
% sudo pmset -g
Active Profiles:
AC Power -1*
Currently in use:
hibernatemode 0
womp 1
sleep 0
powerbutton 1
disksleep 10
hibernatefile /var/vm/sleepimage
autorestart 0
ttyskeepawake 1
displaysleep 0
2. Once the machine has gone to sleep for a while, it never seems capable of re-detecting the display which is hooked up to it (a Panasonic projector running through a Monoprice switcher). The only way I can then get the display back is to ssh into the machine and do a 'sudo reboot'. Very frustrating.
Any ideas about either of these [related] issues?
thanks!
Any ideas?

Have you tried trashing /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist, & if you have one, /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist? Or toggling between one of the preset Energy Saver settings & your normal one?
Also, very unlikely to be the problem but make sure no uninterruptible power supply emergency shutdown settings are somehow in effect with the pmset -g ups terminal command -- I think you should see:
<pre>UPS settings:haltlevel off 0
haltafter off 0
haltremain off 0</pre>
Regarding your other problem, does it make any difference if the display is connected directly to the Mini, without using the switcher?

Mac Mini 2009 vs Leopard Server

Hi all...
I am hoping to get to the bottom of this asap, as I am looking forward to just getting on with things.
The issue is installation of Mac OS X Leopard Server 10.4 on a Mac Mini (Early 2009)
First of all.... Yes I have read the *Article HT3479* http://support.apple.com/kb/HT3479 and yes it allows you too boot your mini, however....
When you go through the installation process and are entering your information, there are several key steps missing from the interview[Server Assistant]. The main question missing is, "What type of installation" Standard, workgroup or advanced.
Another key set of questions missing is Network Setup.
So suffice to say the HT3479 does not address the issue i am experiencing.
Here are the methods I have attempted to use to install Server on this mini...
HT3479. {The result is that I can not run Server Preferences... Apparently the computer is in advanced mode and can not be reverted to standard}
The above method has been tried in the following examples...
* Install Mac OS X Client (10.5.6 from client disk)
+ Apply updates (at the time it was pre 10.5.7 so up to and including all updates to that time10.5.6)
+ Run Server installation from 10.5.4 Server Disk
+ Apply patches before rebooting
+ Run through shorted setup questions (See above)
+ check for updates before launching anything
* Install Mac OS X Client (10.5.6 from client disk)
+ Don't apply updates
+ Run Server installation from 10.5.4 Server Disk
+ Apply patches before rebooting
+ Run through shorted setup questions (See above)
+ check for updates before launching anything
I tried the above methods several times having no success
I contacted Apple support where I was asked to just try it again! and was told that nobody else was having these issues.
Great... 60Gb download capped reached so I had to wait for this month to continue.
10.5.7 update was released recently, so i thought I may be in luck.
So this month I have tried the above methods several times with the same outcomes.
In desperation I tried the following method...
Boot the Mac Mini in Target Disk Mode and running installation from an iMac targeting the disk in the mac mini. {The result is that during Boot up and Shut down verbose mode is invoked and there are numerous error messages in the log files, secondly I am experiencing several issues with DNS names etc.... won't accept SERVERNAME.local}
Anyway, this method gave me the most joy but still far from ideal.
Seemingly unfair it let me glimpse what leopard server can do, and yes i like what i see, but I really need to be able to install leopard server normally and have no issues.
*Hardware Configuration*.
Mac Mini (Early 2009) A1283 (2.0\1X1G\120\SD\AP\BT)
Upgraded RAM from 1GB to 4 GB (yes it works fine, full hardware test performed)
Upgraded HDD from 120GB to 320GB 7200 rpm (Caviar Black)
Samsung 22" monitor
Apple Keyboard (Aluminium with keypad) A1243
Apple Mightymouse A1152
Network
ADSL modem PPPOE
Apple Airport Extreme
Wired direct from rear of AEBS to Mac Mini
AEBS setup in DHCP, but reserved IP address for Mac Mini's Mac Address
Software
Mac OS X Server Version 10.5.4 [0Z691-6214-A] (Full retail version)
Mac OS X 10.5.6 Disk version 1.0 [2Z691-6344-A]
I am sure that others are experiencing the same issue, as many have listed similar issues to the above, however many are open ended with no resolution. I hope that if a solution is found or it is determined that there is an issue that news can be posted by apple so others are better informed before investing money in both products hoping to achieve a working network server.

I recently purchased a Mac Mini 320 GB model and OS X Server (Leopard). Before I purchased them I asked a couple of the Genius guys if I could run OS X Server normally on one of the new 320GB Minis? And the concensus among several Apple Store employees, was that yes, there should be no problem whatsoever...
So I bought the pair, and went through the install process numerous times, and was never able to get the standard installation until I resorted to dire measures which I have outlined below.
I tried to boot from OS X Server 10.5.4 on several machines at the Apple Store, and it does not boot any of the new machines (as of 2009.06.02). The normal install (use the os x server disk to boot) works perfect on an iMac 2.4GHz machine, and on a G4 Mirrored Drive machine, and on both of these machines the process is simple. Pop in the os x server disk, go get a sandwich, come back, answer a few questions, you are up and running, and life is great. It doesn't get any better...
The problem with the newer machines is that you must install the standard os x, get all the updates, insert os x server disk, and install os x server. The unfortunate part is that by the time you install OS X Server several items have already been set, OS X Server senses this and skips about 17 screens that allow for {"standard", "workgroup", "enterprise"} setup, and goes right into the "enterprise" mode.
One of the big conveniences with the standard setup is that quite a few things are created for you. Once you use the "standard" setup you can promote the installation to the "enterprise" mode by opening it with "Server Admin" which provides infinitely more control, but using "standard" setup to start with simplifies life considerably.
If you figure out how to do the "standard" install bear in mind that when it asks you for your administrative user account info it really wants :
name : Directory Admin
shortname : diradmin
password : astrongpassword
This will allow you to go from LOCAL to LDAPv3/127.0.0.1 when using Workgroup Manager
When it asks if you want add more users you can add one user, the "Local Admin" :
name : Local Admin
shortname : localadmin
password : astrongpassword (you will have to reset this password after you login as diradmin)
You can reset the "Local Admin" password via "System Preferences ---> Accounts"
and you can create the other users via the Workgroup Manager ---> LDAPv3/127.0.0.1 domain once you get DNS and Open Directory working.
if you use "standard" or "enterprise" the first thing to setup is DNS, everything else depends on DNS being configured correctly. "standard" really shines here because it won't let you screw up DNS.
You will need private DNS even if you have a provider handle public DNS for you.
If you are using standard you will be asked for, and can enter something like the following :
domain : crystal-palace.mac.private
machine : crystal-palace
if you are doing the "enterprise" mode you will also have to enter crystal-palace.mac.private in one more field,
Each machine will have a fixed PRIVATE IP address in the form of "192.168.1.n" and a "Computer Name" that was unique within the ZONE (the group of machines) via "System Preferences ---> Sharing".
Once you switch to the "enterprise" mode you can add more machines (using the "Computer Name" above) with their respective private ip addresses.
If you are using the "enterprise" mode, You want to setup Open Directory initially as "standalone", once that is working promote it to "Directory Master" via the "Settings" Tab. If you are using the "standard" mode, the Open Directory is setup automatically as "Directory Master" but there doesn't seem to be any way to add to the DNS, I think you have to use "Directory Utility" to do this. But if you've gotten this far it is easier to promote the setup mode to "enterprise" with "Server Admin".
I have a 1TB drive partitioned into 8 logical drives , the first seven standard partitions are named BUP_1 through BUP_7 and are provide 93 GB each. They are setup as test drives. The last partition is named TM_1 which is used for Time Machine backups and it provides close to 280 GB of backup storage.
On the first partition, I installed OS X 10.5.7 along with some basic applications that I normally use. I then created a dmg installer that I saved to TM_1 using disk utility and used that to install the image on the remaining six partitions (BUP_2 ... BUP_7).
The seven standard partitions then have OS X 10.5.7, which I basically use as test drives. It is here that I attempted different things trying to get this to be a simple deal. If one attempt didn't work I moved on to the next partition...
The BUP_n already have USERNAME setup as localadmin, not admin CHECK step ( 4 ) below. Also note that the dscl commands all have a dot following them.
Steps that worked for me, that allowed me to select the setup mode for os x server.
( 1 ) Boot mac into single user mode by holding down (CMD-S) during startup until you see text scrolling on the screen.
if the text on the screen stops, and you don't get the "root # " cursor, you may have to hit return once in order to get it. Once you get the root cursor you will need to enter the following commands very carefully. On the paths you can type part of the path and hit tab for auto completion. Everything is case sensitive...
NOTICE that USERNAME needs to be substituted with the correct shortname from step ( 4 ) in steps ( 6 ), ( 7 ) and ( 8 )
( 2 ) $ mount -uw /
( 3 ) $ /bin/launchctl load /System/Library/LaunchDaemons/com.apple.DirectoryServices.plist &
( 4 ) $ dscl . -list /Users
( 5 ) $ rm -R /Library/Preferences/
( 6 ) $ rm -R /Users/USERNAME/
( 7 ) $ dscl . -delete /Users/USERNAME
( 8 ) $ dscl . -delete /Groups/admin GroupMembership USERNAME
( 9 ) $ rm /var/db/.AppleSetupDone
( 10 ) $ rm -R /var/db/dslocal
( 11 ) $ mkdir -p /var/db/dslocal/nodes
( 12 ) $ cp -Rp /System/Library/DirectoryServices/DefaultLocalDB/Default /var/db/dslocal/nodes/
( 13 ) $ cp -Rp /System/Library/DirectoryServices/DefaultLocalDB/dsmappings /var/db/dslocal/
( 14 ) $ passwd
( 15 A) $ shutdown -h now (if you want to reboot outside of single user mode)
OR
( 15 B) $ exit (if you want to continue booting in single user mode)
I think that to make this an easy install, there should be a small script from Apple that you can run once OS X, and OS X Server are installed, and updated, that reset everything to pristine, so that after running the script everything that needs to be removed, or reset is done so that you can go through the normal 17 screens that allow for simple setup of OS X Server, just like if you had been able to boot from the OS X Server disk.
The answer I got from Apple Support is that when new machines come out it takes a while to get the correct drivers and release an installer disk for OS X Server. The unfortunate part is that there is no simple way to allow the installer to select which mode they need for the particular installation. They are forced to take the "enterprise" mode...
I am not SURE whether the steps I have outlined above cover everything, that is why I am suggesting that if would be far more accurate if Apple provided an installer script when they have NON_BOOTABLE versions of OS X Server Installer.
After three weeks and about 150 hours worth of work, I finally gave up and took the Mac Mini and OS X Server back and bought another iMac 24. Whenever a newer version OS X Server that is bootable on the newer machines comes out, I will get it another shot...
The guy I dealt with at the Apple Store kept saying, it works, you're just not installing it correctly. He also said "I've installed OS X Server on a Mini". But everytime I asked him, "Was it a new new Mini?" and he would respond, "Well, NO!". I also asked him "Were you able to boot the Mini from the the disk ?", he responded "YES!"
I ran into some other issues, for example one night I shutdown the server, and the next morning none of the passwords would work, not even the root password. So I came up with the following, hope this helps.
PROBLEM :
This morning for some reason the Mac Mini would not allow me to log in, neither as the Local Admin, nor as the System Admin. The database containing the login info must have become corrupted.
FIRST LEVEL REPAIR ATTEMPT
I started the machine using the Apple Install DVD, holding the "C" key to force the CD to boot
Once the installer screen came up, hit return and select :
( 1 ) Menu Utilities -> Disk Utility -> Select the Drive -> Repair Permissions
( 2 ) Menu Utilities -> Disk Utility -> Select the Drive -> Repair Disk
( 3 ) Quit out of Disk Utility...
( 4 ) Menu Utilities -> Reset Password
( a ) Reset the password for the root user
( b ) Reset the password for the local admin user.
( 5 ) Quit out of Reset Password...
( 2 ) Menu Utilities -> Startup Disk
( 6 ) Select the correct disk to use for re-start.
( 7 ) Re-Start
( 8 ) I tried this several times, but could never get the new passwords to work after re-booting.
There must have still been some corruption in the database.
SECOND LEVEL REPAIR ATTEMPT
( 10 ) reboot and to hold the CMD-S to boot into the single user mode.
At the root prompt, type in the following commands. I might have to hit return, if there is a white cursor that appears to be hung up waiting for input, just hit return, then you should see the root prompt.
First try :
( 11 ) root # fsck -f
( 12 ) root # mount -uw
( 13 ) root # passwd
( 14 ) root # exit
( 15 ) when the login dialog appears try to login as root
( 16 ) if you can login, go to :
( a ) System Preferences -> Accounts and reset the password for the Local User in question.
ELSE
( b ) Go to step ( 20 ) below
THIRD LEVEL REPAIR ATTEMPT
This is the command set to reset the local DB on the server
20. $ reboot and to hold the CMD-S to boot into the single user mode.
21. $ mount -uw /
22. $ mv /var/db/dslocal /var/db/dslocal.old
23. $ mkdir -p /var/db/dslocal/nodes
24. $ cp -Rp /System/Library/DirectoryServices/DefaultLocalDB/Default /var/db/dslocal/nodes/
25. $ cp -Rp /System/Library/DirectoryServices/DefaultLocalDB/dsmappings /var/db/dslocal/
26. $ passwd
FOURTH LEVEL REPAIR ATTEMPT
( 31 ) Shutdown the machine with the problem( we will call it the pm for problem machine)
( 32 ) attach a firewire cable to the pm on one end
( 33 ) attach the other end of the firewire cable to a good machine (call it gm)
In my case the gm uses firewire 400, and the pm uses firewire 800, so I had to get a cable that had firewire 400 on one end, and firewire 800 on the other,
( 34 ) start up the pm while holding down the "T" key until you see a large image floating around the pm screen. This put the pm into the "TARGET" mode, now it will behave like a drive, and you should see the drive on your gm desktop.
( 35 ) You can now copy anything you need from the pm to the gm.
( 36 ) Make sure you BACKUP anything and everything you want from the pm to the gm
( 37 ) IF YOU ARE WORKING ON A MACHINE CONTAINING OS X SERVER :
At this point, if nothing else has worked you will have to erase the drive and
( a ) re-install OS X, and
( b ) re-install OS X Server on the pm
( 38 ) IF YOU ARE WORKING ON A MACHINE CONTAINING OS X :
At this point, if nothing else has worked, from the Install DVD you can
( a ) Archive and re-install OS X on the pm
Another interesting thing that has happened several times now, is that I always install standard OS X on the first partition of the disk, and OS X Server on a different partition, and after installing OS X Server the machine would no longer boot from the standard OS X partition. This has happened like four different times, not sure what could be causing this problem. Booting from the install disk and running Disk Utilities to repair the disk (which comes back OK), and repair permissions always comes back with an internal error,and cannot be completed.
I have no clue what could be happening. I always had to reformat the drive and instal OS X all over again.
I have no clue what could be causing this to happen ?

HT1338 Mac Mini upgrades? 10.5.8 to 10.7?

I am currently running 10.5.8 on my mac mini. I want to upgrade to 10.7, but it looks like I've got to get 10.6.8 first. Is this even do-able on my machine?

As Allan suggested, you need full details to give an appropriate answer.
Those you give now seem okay to move to 10.6.8. at least.
Before buying anything you should first make sure your machine will accept the upgrade you have in mind.
Minimum specs for Snow Leopard. Mac OS X v10.6 Snow Leopard -Read the Technical Specifications
From the USA go to http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
In Europe or otherwise substitute your national code in place of /us above.
In the UK … the last known price was £14.
Before you start upgrading, back up your files.
Once you have upgraded to Snow Leopard you will need to apply the Combo updater. Mac OS X 10.6.8 Update Combo v1.1 and follow with a software update to pick up any later improvements.

Mac Mini Upgrade to Leopard

Similar Messages

Maybe you are looking for