Mac mini user. LaCie burner. How burn DVD from slideshow made on mac

Have burned a slideshow before but have forgotten just how. Can't get the LaCie to burn the DVD disc. UsingDVD+R double layer Memorex. Help.

I go to finder, pictures, I Photo slideshow folder, Choose slideshow, right click on mouse to "Burn", click and the indication is it is writing, finishing, verifying. I put the disc on our player at the TV and it says "disc not recognizable" The disc has been incised, so something is happening.No pictures are visible. I have tried 3 times to no avail.
I have made this slide show a few months ago of pictures on a trip. It is 1200 images, so quite large. I misplaced the disc and really am miffed at not being able to reburn it.

Similar Messages

2010 Mac mini Superdrive not burning DVD's

My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?

Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

How do i burn dvd from iMovie

How do I burn dvd from iMovie. iMac has yesomite installed.

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Burn dvd from Aperture

burn dvd from Aperture
How do I select photos, projects to burn for a dvd?

Frank's answer tells you hao to export your slideshow movie on a data DVD. But if you want to burn a video DVD that you can play in a DVD player you will need additional software, see Karsten Schlüter's User Tip:
How to create a video-DVD? (Macs without iDVD): Apple Support Communities
Regards
Léonie

What software is good to burn DVDs from my iMac ?.

What software is good to burn DVDs from my iMac ?.

It's what iDVD is for. If you don't have it:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Is there a way to create DVDs from movies made in iMovie on the iPad?

Is there a way to create DVDs from movies made in iMovie on the iPad? I have a PC. Thanks

King_Penguin wrote:
There are third-party browser apps that have settings within them to identify themselves as full browsers e.g. Atomic Web, and I believe the iCab Mobile browser also does (I don't have it so i can't check)
iCab indeed does allow for that

Help! New user on burning DVD's

Hello I have a Macbook I purchased early last year, the software I have include iLife 08, iWork08 and Quicktime Pro. My question is do I have everything I need to burn dvd's movies that I own so I can watch them on my iPhone?If not what do I need?
I do a lot of traveling and I have a huge dvd collection that would be nice to have some movies with me from time to time.
Thanks!

My question is do I have everything I need to burn dvd's movies that I own so I can watch them on my iPhone?
Click Here
(App is in the in upper right corner.)
You do but I also recommend looking into Roxio Toast / Streamer which is designed for this purpose.
Or you can check out these as well:
http://mymoments.roxio.com/enu/articles/mac/audio,backup,burning&_copy,mobile,photo,video/2008/03/toast_9s_greatest_hits.html?bhn_mid=560420&bhnrid=86002787
http://www.roxio.com/enu/products/toast/titanium/share.html
http://all-streaming-media.com/convert-audio-video-files/Cucusoft-DVD-to-iPhone- Converter-Move-put-copy-transfer-convert-DVD-video-to-Apple-iPhone-format-MP4-vi deo.htm
http://stream-recorder.com/forum/ad-convert-dvd-iphone-pq-dvd-converter-t2143.ht ml?s=92bf9244a632669da7046368a0d9faaf&
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

How can you edit a previously burned DVD from an older iMovie app?

I converted VHS home movies to DVD years ago on the origonal iMovie app. How can I edit those DVD's now? Do I need a third party app to convert the DVD files for use in the new iMovie?

Yes, you need to 'reverse engineer' the highly compressed mpeg2 format of the DVDs.
You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
If you are running Lion:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

Burn DVD from video

Somewhat a rookie so go easy on me. I produce a 30 minute TV show in Final Cut Express. I print to video for my media that I give the TV station. I'm often asked to present one of my episodes to a club, etc. A DVD is most convenient for this. I've never had luck printing a good DVD from FCE...I'm sure it's my technique. So, I got the smart idea of using my edited and finished video that I would send to the TV station and use iDVD OneStep (iLife 09) to produce a DVD. Everything seemed to go fine until I put my new DVD in a DVD player...no sound. The image quality is very good and very happy with that...but no sound. What have I done wrong or is iDVD simply not made for this purpose?

Hi
There is a lot to this. Some basic.
DVD - is a standard in it self - CAN only do SD-Video (as old CRT-TVs at it's best)
Neither iDVD, Roxio Toast™ or DVD-Studio Pro - can do anything better.
(Roxio Toast 10 (11) Pro incl BD-component - Can burn to Blu-Ray and even small movies
as this on Standard DVDs - BUT they NEED a Blu-Ray Player to be viewed)
*DVD quality*
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov *(not selfcontaining, no conversion)*
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x4 (x1) (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Burn dvd from imovie

How do I burn a dvd from imovie? Using imovie as updated when Mavericks was installed.

Do you actually have iDVD?
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

Disk Utility - Burning DVD from desktop file created from camcorder

I am unable to burn a DVD from a file on my desktop. When trying to use the upper tray, the disk drive won't remain closed and I am unable to proceed.
When using the lower tray, it begins the burn process, then returns this message:
Unable to burn file. The device failed to respond properly, unable to recover or retry.
The upper tray is a HL-DT-ST RW/DVD GCC-4480B
The lower tray is a Sony DVD RW DRU-530A.

Thanks for answering ALL the questions, too many times I ask as many questions as possible to get as much info as possible and I get a one line response.
4GB file with Disk Utility should be fine.
4x speed should be fine too, but you may want to try 2x, just in case the ATA-33 bus is struggling. The ATA-33 bus is the original bus in the MDD for the optical drives, the hard disks were on an ATA-66 and ATA-100 bus. Unfortunately ATA-33 is very limited in the amount of data it can reliably send in a given time, and 4x DVD burning is the absolute limit.
Sony DVD-R should be fine, many here are wary of Memorex media, I use it for temporary copies of product / games discs, but never for backups.
How is the external DVD burner attached ? FireWire ?
It really should be working, you've already confirmed that both the drives successfully burn CDs, so we know they're recognised and operating. And you've said the 4GB camcorder file is on your desktop, ie. on the internal hard disk, so we know it's not a speed issue with the source file, like if it was on a flash drive - or is it ? Or is it still on the camcorder ? If so get it copied to the internal hard disk.
Can you confirm the ATA-33 bus and Disc Utility support for the drive by using Apple System Profiler, if you select ATA, it should appear on the ATA-3 bus. You'll also have an ATA-4 and ATA-6 bus.
If you click on "ATA-3 bus" you should find an entry "Disc Burning" and it should say "Apple Supported" or similar. If it doesn't then I don't think you can burn with Disk Utility. Generally, above OSX 10.4.6 (or 10.4.5, can't remember exact) all these drives are supported, for burning and booting from. I suspect you're fine as you've said you burn CDs with it fine.
One thing some people do is to buy an ATA-133 PCI card, and run the internal hard disks off that and the ATA-100 on the motherboard. Then use the motherboard ATA-66 slot to drive the optical drives. Don't spend any money yet, we'd have to confirm that the burn speed is the issue. Like said, try burning at 2x or 1x.
Apologies now if my Apple System Profiler instructions are not 100% accurate, my OSX 10.5.5 Mac is unavailable just now so I've based my instructions on OSX 10.3.9 ASP.

Burning DVD from disc image

I've been burning DVD's from disc images using Encore 1.0 for some time now. ever since I upgraded to 2.0, Encore gives me error messages on my project like:
"first play not set" and
"remote control problem".
I don't see how these messages can appear when I'm using a disc image (i.e. a completed project) as the source. does anyone know?

When you click on the Build DVD button in the Disc panel, Encore does a quick check of errors
in the current project. If you have a new, empty project, you will at least get errors about First Play and Title Remote. Those errors have nothing to do with your disc image, they apply to the current project, from which you are trying to burn your disc image.
These errors may be safely ignored, since they don't have any effect on your disc image.
-Jeff

Burn DVD from Youtube

How can I burn a DVD from Youtube?

You can watch Youtube videos on your TV many ways. Many newer Smart TV's have a Youtube channel, if yours does not have that ability you can also get an AppleTV ($75 refurbished from Apple's online store) and view Youtube and much much more including your own video library, photo library, etc and other channels. If that is of any interest to you, click http://store.apple.com/us/product/FD199LL/A/refurbished-apple-tv for information.

Mac mini user. LaCie burner. How burn DVD from slideshow made on mac

Similar Messages

Maybe you are looking for