Mac Mini using dual-link to ACD 30" wake from sleep problem?

I have a new mac mini and rather new 30"ACD using the display port via dual link adaptor. The screen looks find but sometimes when I put the mini to sleep and turn the display off, and then turn the display on and wake the mac mini, nothing appears on the display. I don't think it is every time, but it occurs. I have my keyboard attached to the display with the usb connection, and so I can choose from the display options to turn the mac mini off or put to sleep when turning off the display manually. I have used this sometimes but prefer not to.
When the display doesn't show any image I have to hard shut down the mac mini, then start it up and leave the display on, then the image shows up.
Is there a solution to this? I don't mind using any one surefire way to wake the whole system wake from sleep. Either turn off or turn on the option where turning off screen also brings up option to put mac mini to sleep or turn off. Don't use that option at all. Attach the keyboard only to the mac mini directly, etc.
Any solutions would be appreciated.

What is the firmware version of your Mini DisplayPort to Dual-Link DVI Adapter? I've read many reports on how this particular piece of Apple kit is just not working properly (http://www.9to5mac.com/DisplayPort-Dual-Link-DVI-Adapter, http://foliovision.com/2009/12/20/apple-dual-dvi-mini-displayport-adapter-mb571z).
I've seen some people report that running firmware version 1.02 (or now 1.03?) solves their problems. I've also heard that people have had to resort to actually exchange their adapter in an Apple Store and hunt through new boxes to find adapters with the proper firmware version.

Similar Messages

My Mac mini locks up intermittently or will not wake from sleep what should I look for

Has this anything to do with flash

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report—it will be very long and not helpful.

Why my new Mac mini DVI dual link mini display port adapter doesn't work with my 30"display (LG W3000H)?

Hello There
Can any of you advise on the below? Tried to connect Mac mini with a 30" display through a DVI dual link mini display port adapter. For the first try Mac mini go connected to the display, then i've chosen the highest resolution (2560x1600, native) and right at that moment they got disconected. Since then the display stays black. What can be the issue, is it possible DVI dual link mini display port adapter is not compatible with 30"display (LG W3000H)? It works with DVI male-male cable plus DVI HDMI adapter as long as the resolution stays under 1280x800. Any idea is much appreciated.
Thank you, Vera

Hi,
I can report that my Mac Mini Intel Duo connected instantly and without even having to set it up (on the first try) with my 1366x768 native resolution DELL 50" Plasma Display. It's so beautiful that I just want to stand there and fondle my HDTV as I drool haplessly like Homer Simpson with a doughnut in his mouth. Seriously, no problems.... guess I bought the right cable (ebay).
Before you buy a Duo, make sure you're aware of the airport and bluetooth issues that so many (maybe everyone who tries to use them together) are having. It seems that bluetooth interferes with airport, or maybe the other way around. Anyway, it's messed up. Also, Airport reception is generally VERY poor with the new Intel Mac Mini.
Despite these things, I still love mine (I now have 2 base stations and an airport express for my powerhouse wireless needs, and an external DLink bluetooth-2-USB dongle solved the bluetooth/airport issues... in my case).
FWIW,
awk
667-MHz Ti PowerBook G4. Mac OS X (10.3.9)

Mac Pro Raid 0 (no Raid card) wake from sleep problem

I have a early 2009 Mac Pro with 5 hard drives. One Primary and the other four in the drive bays set up in a RAID 0 array. I don't have a raid card in the computer so software raid I guess.
My computer goes to sleep and sometimes (1 out of every 3 times), any attempt to access anything on the raid array (either through Finder or by using a program that has data on the raid array) causes the system to basically freeze up (get beach ball) and requires a hard reset of the Mac Pro.
I'm losing both data and patience with this. I could just set it to never sleep I guess, but I'm not sure how good that is for the computer and drives.
Any ideas?
Thanks,
TRaymond

My guess is there is something amiss with your hard drives and RAID.
Are they all the same make/model of drives?
What are those?
How much capacity?
Did you test each drive first?
This is a simple RAID0 (stripe)?
Have you run Disk Warrior against your system and RAID?

Mac pro shuts off when I try to wake from sleep

Hello mac gurus.
I've a problem that is slowly getting more and more frequent.
Mac Pro 2 x 2.8 GHz Quad-Core Intel Xeon
OSX 10.5.6
4 gig ram
When I leave work I let the computer go to sleep automatically. (I think I have it set for one hour of inactivity).
In the morning when I arrive at work, the LED power button is pulsing like it should. But... When I hit the space bar to wake the computer, I hear a clicking noise (from inside the computer), and the power button goes dark (ie: it shuts down completely). I then have to push the power button to restart and login as usual and all is fine.
This doesn't happen every time. But lately it seems to happen about 2-3 times a week.
I tried searching the message boards, but nothing seemed to describe my issue exactly. I'm suspecting an SMC reset might help, but again, that doesn't seem to be what's happening.
Thoughts? Help?
Thanks!
Cyen

Thanks Dale,
No I had not tried it, because I was unsure if the SMC reset was my problem or not. Since your post, I just did the reset this morning. I'll see if this fixed the problem, and I'll post an update in a few days (with hopefully positive results).
Note: I was expecting some sort of acknowledgment from the computer that the reset was successful, and there was none. So I hope I did it right.
(For those wondering, the SMC reset is simple. Shut down your computer. Unplug the power cord. Press and hold the power button for 5 seconds. Plug it back in, and restart.)

Dual Quad Core - wake from sleep problems

I have a brand new Quad core 2.8 ATI Radeon, and have experienced both wake from sleep problems within the first week of ownership, more than once. Namely, restart on wake, and/or corrupt graphics-frozen on wake. I haven't called AppleCare, but my question is is it worth it? Is it thought to be a software problem, or a hardware issue? I don't want to go to a lot of trouble if any replacement exhibits the same problem (or worse), but at the same time I feel it is a real issue and should be dealt with under guarantee. What should I do? Suggestions please...

There's lots of anecdotal data in the forum here and elsewhere, but the bottom line so far is that nobody knows except perhaps the Apple folks that are working on it.
No one that I've seen posting has identified even a common thread...some machines have the reboot from sleep problem, some have graphics issues, some have both (I'm in the first camp...reboot from wake but no (touch wood) graphic issues.
It wouldn't hurt to call Apple and get your issues on record; it helps them know the extent of the problem.
Your warranty is for a year so it's not immediate, especially since there doesn't seem to be a lasting fix available. Resetting SMC and/or PRAM works for some...for a while...
Right now I'm simply not sleeping the machine (I don't normally do it anyway) and waiting for Apple to come out with a fix. My bet is on a software/firmware fix (there are reports that the problem does not happen in bootcamp/windows, which more or less rules out hardware). But that's a sort of educated guess.
People have returned the machine only to get the same...or worse. Again, I'm not rushing into that.
Message was edited by: BillC37

IPod 4G always mounts for disk use when Mac wakes from sleep

My 4G iPod is always mounting for disk use when my Mac (10.4.8, Dual 1.8 GHz G5) wakes from sleep, even though the settings for the iPod has "enable disk use" unselected. When I launch iTunes (latest version) the iPod promptly is unmounted. I have restored factory settings, I have reinstalled the computer's OS and iTunes with it.
What is going on and how can I make it normal?
Dual 1.8 GHz G5 Mac OS X (10.4.8) iTunes 7.1, iPod 4G 20GB

UPDATE:
I have started to turn off Bluetooth at night before I put my computer to sleep. I HAVE NOT HAD THE FIREWIRE RANDOM DISMOUNT PROBLEM SINCE. I do not know if this is a freak coincidence -- but so far, so much the better for my firewire drive.
Hope this helps someone else down the line... eh hem...

Mac mini 2014 w/OS 10.10.1 Still won't wake from sleep correctly

Yes, the wake from sleep still exists with Mac mini 2014 and Yosemite using a Benq 2760H monitor. AND, OS 10.10.1 DON'T FIX IT!!!
I've been monitoring the forum for several weeks now looking for a solution.
And today, the email arrived announcing 10.10.1 listing a fix for the Mac mini/Yosemite wake from sleep problem! Finally- a fix!
But alas, a false alarm. Quickly updated the OS to 10.10.1, restarted the computer, check to see that 10.10.1 was listed and then put the unit to sleep.
Anxiously waited for 3 or 4 minutes and pressed a key, and nothing!!!! After a minute or two there were several screen flashes, waited a few more minutes and still nothing.
Where do we go from here?
I've been a Mac user 20+ years and experienced several problems but never have experienced such a long delay in even having a problem addressed, much less fixed.

I am having this problem still, even after updating with the latest combo. I find that my Macbook Pro (using 10.8.5) will show the beach ball spinning with a black screen. I have to restart the laptop in order to clear this problem. Very annoying since this can happen two or three times a day.
You mention 'plists'. What are they? And if you delete them, are they recreated automatically upon restart?

Probelm With EArly 2008 8-core Mac Pro on Wake From Sleep

Well, after more than a year of being a flawless machine, I am now starting to have trouble with my 8-core 2.8 GHz Mac Pro purchased in January of 2008. A few days ago I noticed that when I woke the Mac Pro from sleep, the desktop came up momentarily, and then the screen went went black after a second or less. The power light on the front of the Mac Pro was still burning brightly, but I could not do anything but do a power button forced reboot. I did so, and the machine booted up to a blue screen, but would proceed no further. I then did a second power button forced reboot. The Mac Pro then booted up perfectly this time and all was well.
However, I have noticed since then that often when I wake the Mac Pro up from sleep, the desktop comes up and everything looks normal, but I have absolutely no ability to do anything. I can move the cursor on the screen but clicking the mouse on anything (menu items, icons, etc.) does nothing. I cannot do anything but a forced reboot to regain control of the machine.
I have booted from my drive that has the clone of the OS perfectly with no problems. I have used disk utility to check the Mac's main boot drive and all checks out fine. I have repaired permissions. I have reset the SMC, but nothing has helped. This morning when I went to wake up the Mac Pro, the desktop came up, but absolutely nothing was operative. Mouse cursor moved on the screen, but I could not get any menu item or icon to respond when I clicked on it. I did a power button reboot and the machine is working again, but every time I do one of these power button reboots Time Machine takes 15-20 minutes to prepare and do its backup. Clearly something is wrong, but short of never putting my Mac Pro to sleep again I am out of ideas as to what to do next.
For over a year I have been using a Logitech wireless keyboard and mouse, but I don't know if this is involved in the wake from sleep problem or not. I should add that this keyboard/mouse combination has never previously given any trouble at all.
I would greatly appreciate any suggestions that anyone may have.
Tom

Glad to hear you were already using SuperDuper and (use to) use Disk Warrior.
Can't be rushed. Take a look at how long it takes Micromat and SoftRAID to update their products to get a ballpark idea of time and work to have compatible versions. Or do like others, wait for "SP1" or a year, wait for Adobe and others to be ready before fully supporting.
The best time to upgrade to (Jaguar, Panther, Tiger, and now Leopard) is a year out, even when the product is at its end release-point, not when it is just 1.0.
Minor but things First Aid misses, and can mean all the difference in the world. Major is bad enough that after recovering files you need, you should reformat and restore due to keys out of order, overlapped extents, corrupt journal (there is a tip about turning journaling off and back on to fix some problems).
I would wait for Disk Warrior (4.1.1) before upgrading to Leopard, rather than the other way around.
Alsoft can't work on an update until they have in their hands a stable and released version. And Disk Utility does and has changed during the last 18 months.
Apple is in the habit and you will find that developers are left in the dark during the last stage. Then 10.5.0 had too many bugs and problems. 10.5.2 was stable-ish, and changed the "rules of the game." 10.5.6 has had a few wrinkles of its own.
Apple warns to NOT use older versions of its own Leopard Disk Utility with the latest (10.5.6) when it comes to repairing permissions (see MacFixit).

Trouble receiving FaceTime calls on my Mac Mini using OSX Mountain Lion

I have a Mac Mini using OSX Mountain Lion, an iPad 2, and an iPhone 4. I tried to receive a FaceTime call on my Mac but it was telling the caller that it was busy. I was however able to call her iPhone from FaceTime on my Mac and we connected that way. After our video conversation I tried testing this by calling my Mac from my iPhone. I also received the message that it was busy. I should also add that when I first received the call I had my iPad FaceTime turned on. The iPad was ringing but not the Mac. So I turned off FaceTime on my iPad and had her call me back again using my email address. As noted it said it was busy. Please help!

Do you have different FT addresses on your Mini, iPhone and iPad?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

How can i control my new mac mini using my new macbook air? Thanks

Hi, I would like to control and even file share my macmini using my macbook air... the mac mini is plugged into the family 50inch plasma... so getting access to it is not always easy! I'd like to play itunes, films, file share, just about do everything from the macbook air as if I was on and in front of the macmini... i'm hoping to do this from any country using wifi!
I've looked at screens - vnc client, but can;t find anywhere where it says I should download the app... is there a master to download to the mac mini, then waht do i download to the macbook air to enjoy control... also am i expected to download twice and pay twice?
I'm very new to the mac world... loving it, but lots to learn! Appreciate your help, thank you
Chris
PS... bonus if I can also control the mac mini using my iphone4 and ipad 2 (yup, my bank balance took a major hit.... apple certainly got me hooked!)

Sceen sharing is built into the OS go to your help in the finder and type in "screen sharing"
To set up screen sharing: (on the mini)
Choose Apple menu > System Preferences and click Sharing.
Select the Screen Sharing checkbox.
To specify who can share your screen, select one of the following:
All users: Select this if you want to allow any user with a user account on your computer to share your screen.
Only these users: Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Accounts preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list and click Select.
Click Computer Settings and set the following options:
Anyone may request permission to control screen: Select this to allow anyone on your network to request to share your screen.
VNC viewers may control screen with password: Select this and enter a password that VNC viewer applications can enter in order to control your screen.
It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

Need to boot broken Mac-Mini using retail Snow Leopard 10.6 DVD

Hi,
In Summary:
==========
I have Mac Mini (late 2009) which does not boot anymore and I need to install Snow Leopard using retail DVD (version 10.6). The OS/installer from the DVD does not seem to boot either. I always very much appreciate the efforts of true geeks. So please, any casual beginner, please do not demoralize with something like "cannot be done" etc.
The complete story:
==================
The start of the problem:
1. All of a sudden, one fine day, on start up, my Mac Mini strated to shut itself down without no apparent reason to me. When trying to boot, it would show a progress bar for about 5 minutes - I am assuming that was disk-consistency check being performed. My best guess is that right after the use of Carbon-Copy Cloner (but I am not 100% sure) it all strated to happen.
2. Performed Mac's Disk-Util check and [Verify Volume] used to display "invalid directory item count, should be 31 instead of 29". Surface scan said disk hardware is 100% fine. Volume Repair never worked, since OS X was installed on the primary disk. I lost the DVDs that came with this Mac Mini, so the option to boot from that DVD and launch Disk Util etc. was not possible.
TechTool Pro - No Help:
3. Started googling and had to choose between [TechTool Pro] and [Disk Warrior], opted for TechTool Pro. Tried its bootable DVD only to learn that TechTool Pro cannot fix it. Again, it's surface scan suggested disk hardware is 100% fine. Sent the details to TechTool Pro support team, they couldn't help either after a couple of e-mails+data exchange. (How do I claim my lost money with TechTool Pro - suggestions appreciated as well).
Googling / Mac Forums:
4. Started looking into forums, learnt that someone had successfully repaired this problem using Ubuntu 11.04 install DVD (i.e., without installing the Ubuntu, but just using its 'try from DVD' feature). I had that handy, but forgot to disable HFS+ journaling before attempting to fix the problem. Anyway, attempting volume repair that way couldn't fix the problem as well. However this step took away my ability to boot from Mac.
5. However using Ubuntu's bootable disk, I could access Mac-HDDs contents - and was able to successfully back-up *all* my important data.
6. Googled and learnt that just attempting to boot using Ubuntu DVD can take away ability to boot using Mac bootable media - possibly due to EFI internals. Suspecting EFI is now corrupt, I tried other 'hacks' like:
6.1 eEFIt Boot Disk - which does not work at all,
6.2 Empire EFI w/ Chameleon - not sure how to proceed with options presented - trying either does not work,
6.3 Super GRUB2 - boots fine, but attempting to boot from Mac-HDD fails after a couple of seconds,
6.4 Boot-132 - boots fine, prompt asks for input, but then I cannot eject/replace the DVD due to Mac-Mini (lack of) design,
6.5 Ubuntu 11.04 / 11.10 - still boots fine - just that I cannot go into Mac-OS-X from here,
6.6 TechTool Pro bootable DVD - which used to boot fine earlier stopped to boot.
As you can see, none worked successfully. So I didn't yet try other popular rescue media - as I suspect that is not the direction I need to go into.
>> Looks like most of my problems are due to the fact that I have Mac-Mini which does not allow eject/replace of DVD from command prompt / out side of Mac-OS-X.
7. Tried emptying EFI partition, playing with EFI/Mac-OS partitions boot flags, Zapping the PRAM, nothing still allows me to boot either from Mac-HDD or any Mac-Bootable-DVD.
Current State:
8. Now while boot time, Mac displays a gray screen for a few seconds, and then a blinking prompt on black background. That's it!
Snow Leopard 10.6 Retail Install DVD:
9. Went to Mac store and bought this DVD only to witness that I can't boot from it as well. (This is a huge shocker, how is Apple able to sell these DVDs if these don't work on genuine MacMini itself. After all we are able to boot from and install Windows/Linux on a variety of Machines).
I am hoping for a very small step/fix that I am missing, since I can still see and access all Mac-HDD contents after booting from Ubuntu bootable DVD. However I am prepared for a good amount of exercise as well - assuming someone posts a valid/verified fix.
Things available right now:
==========================
A. Genuine Mac-Mini (Late 2009) who lost it's ability to boot either from its HDD or Mac-bootable DVDs (TechTools Pro, Mac OS X retail DVD)
B. Mac OS X 10.6 Retail DVD
C. NOT AVAILABLE - DVD that came with this Mac-Mini
D. Variety of rescue DVDs, listed in section 6 above
E. Another machine/PC with Ubuntu 11.04 - giving me ability to access internet
Thanks for reading.
Zita

I had a similar discussion recently with another user.
Your Mac mini (late 2009) originally came with Mac OS X 10.6.2 build 10A432 or build 10C2234 see http://support.apple.com/kb/HT1159 it would have come with an original install disc specific to your model of Mac which you could use to run Disk Utility from or to do a complete reinstall.
The retail boxed copy of Mac OS X 10.6 (Snow Leopard) was originally intended for older Macs which had previously come with Mac OS X 10.5 or 10.4. It would have on it a version of Mac OS X 10.6 or 10.6.1 which would be able to boot these older Macs, but had no need to boot newer Macs which were released after the launch of Mac OS X 10.6 since all those newer Macs already shipped with their own discs.
So it is normal that the retail boxed Snow Leopard installer does not work on your model Mac mini. You should be using the one that shipped with your Mac mini instead. I am guessing you have lost it.
Assuming you have lost the Mac mini original disc, I can suggest the following options to try and workaround this.
If you have another Mac, an older Mac, one that will be bootable using the retail Snow Leopard install disc you have, you could do either of the following.
Connect an empty external GUID partitioned hard disk to this other Mac
Boot from the retail Snow Leopard installer
Install on to the external disk
Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
You can now disconnect the external drive and connect it to your Mac mini and boot from it by holding down the Option key when you turn the Mac mini on
or a similar process if you want to wipe the Mac mini and reinstall directly on to it
Boot the Mac mini in FireWire Target Disk Mode (see http://support.apple.com/kb/ht1661 )
Connect the Mac mini as an external hard disk to the other older Mac
Boot from the retail Snow Leopard installer
Install on to the external disk
Once the install is complete, update it using the combo update not the one via Software Update to Mac OS X 10.6.8. This will add all the newer drivers needed to allow it to work on your newer Mac mini. You can download this combo update from here http://support.apple.com/kb/DL1399
You can now disconnect the Mac mini and boot from it as normal
Note: While the Mac mini is connected in FireWire Target Disk mode to the second Mac, you could backup (if you don't already have a backup) any files you need to retrieve.
If you don't have a suitable second Mac you may have to either borrow someone else's, or get the help of an Apple Store if one is in your area.

I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant. The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work?

Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media? I have not figured this out. Here's what I have observed:
I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts. A USB stick formatted as described does not appear in th boot menu at all.
An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
Thanks.

The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD. It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

Mac Mini used as Apple TV (airplay and apple remote on iphone/ipod)

Yesterday Apple announced the new Apple TV as an iOS device. It can be controlled using the apple remote app on an iphone or ipod touch. I am using a Mac Mini using Air Mouse to control the Mini which is hooked up to my TV. Would it be possible to use the Apple Remote app for this?

Hi Bart,
you could use the itunes remote app to control your itunes music / videos from an iphone/ipod touch/ipad.
http://www.apple.com/itunes/remote/
Keep in mind the itunes currently uses the remote app in a different manor to the apple tv. I don't think you could use the itunes remote app to for instance rent movies. But ones you had the movie rented you could use the remote app to trigger playing /pausing the movie. But there are some advantages, like you can get a list of videos on the computer on the iOS device.

Mac Mini using dual-link to ACD 30" wake from sleep problem?

Similar Messages

Maybe you are looking for