Mac Mini will not read dvd data disk ie osx install disk with internal drive but will read dvd movies
As title said , cant get internal drive to read data dvd's havent tried cd's. I also tried to use an external drive with no luck with any disks. system info shows the drive though. So i guess i have 2 issues. any ideas will help thank you
If the drive can read a movie DVD then the problem must be that the OS DVD is either dirty or badly scratched. Look at the shiny side. If it has finger prints clean it with a lint free cloth. If it has scratches you can call Apple for a replacement disc for a nominal charge.
Similar Messages
-
I have the 1st generation iPad. All of a sudden it will not connect to my wi-fi. It finds my wi-fi, but will not totally connect. I have done everything...reset network, rebooted router etc and it still will not connect. My other divices are connected....iPhone and 3 Macs. Any suggestions?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
my iPod nano screen is frozen and will not respond. It shows the song which was playing is paused, but will not resume playing. I have held down all controls, and changed the slide switch, but nothing happens
Hi Goofy Goat,
Welcome to the Apple Support Communities!
It sounds like you have done some great troubleshooting for your iPod nano that is not responding. In this situation, if resetting it did not resolve, I would suggest restoring the iPod back to its factory settings and then sync your content back onto it from iTunes. Please use the following article as a resource for restoring.
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Have a great day,
Joe -
IBook G3 Will Not Boot - ?/face Icon on fresh install to new hard drive!!
Well, this is my first post here, but I hope someone out there may be able to help me....
I've got this iBook G3, and it will not boot. Originally, I got it and the hard drive was kind of suspect. I was able to install Tiger and use it, but it just stopped booting one day. I figured it was the hard drive, because it wouldn't boot to the OS even when stripped of the extra ram and after a fresh install via target disk mode from my Powermac. So, I changed the drive and reinstalled Tiger. It still won't boot.
Oh, and I've tried resetting the PRAM and resetting open firmware. Any ideas?^^^I'm installing from a family pack and this is the only computer I'm running Tiger on...all of my others are Leopard. Which, now that I think about it, is another reason that cloning the drive to the iBook wouldn't allow it to boot. However, I know the drive is good at least, because my Powermac can boot from it.
Anyway, I put in a 512 mb stick, and it then will get to the grey Apple screen, where it hangs forever. If I do verbose mode, the last line says "creating RAM disk for /var/run"
It sounds like a RAM problem still. I think I have some actual Apple RAM laying around somewhere (maybe a 128 mb), as the stuff that's in it now is not "Mac Ram," but it is what was working when the computer was working before. I'm still at a loss. I know the method I'm using (restored Tiger DVD to partition on iBook due to a bad optical drive), as I've done it before. In fact, it's even the same image from the last time I did it, as I never deleted the .dmg file. -
MacPro won't boot from (2) internal drives but will from DVD
My MacPro hung this morning, blank screen but mouse red LED working. I restarted it and it booted into my 2nd internal drive with 10.5.2 rather than "Macintosh HD". Checked Time Machine and seemed to be all good.
I used the DVD to get TimeMachine to do a complete restore from internal drive 4 onto the main Macintosh HD. This got as far as saying something like "restore complete, click to restart using restored disk".
After clicking I just got a beachball of death.
Used DVD to run disk utility, clean bill of health on all drives except verify permissions gets 15% through then stops.
Now, when I try and boot from either of my two startup disks the MacPro starts up, goes to greyscreen then I get a couple of little clicking noises and the whole thing shuts down.
Tried unplugging everything then just put power lead back in and monitor connection,
Tried running Apple Hardware Test (as it boots from disk but not drives, thought it might be a power supply problem) but AHT gets to "test 1" then locks up
I can boot into single user mode, am about to try FSCK but running out of things to try.
Can I access files from the desktop and put hem onto a remote machine or USB stick from Single User Mode - or access/mount my drives from the DVD. In the "old" days it was poosible to boot to a desktop from a CD - can that still be done?
Cheers
Beardy man
Message was edited by: Beardy man
Message was edited by: Beardy manI always keep spare drives, and use SuperDuper to keep images even of drive volumes.
Keeping one drive to OS only and no data or prefs helps.
Having an emergency drive or partition: a must (sort of like Micromat TTPro eDrive only better).
Pull the drive for now. Maybe Data Rescue II later. And a FW case you can throw it into for repairs or to recover files.
I am surprised you don't get the "stop" sign, a circle + slash, that often indicates corrupt journal/directory and no boot device where it expects to find one.
TechTool Pro, commercial $90 5.0 is due soon, hopefully they were just waiting now for 10.5.5 to be out and see if it would change or alter (or break) their utility.
Backups, whether TS or a clone made with SuperDuper, are critical, should run on their own automatically in background, and the OS doesn't have to be that large, fit it on 60-100GB disk image so you don't have to worry about partition and size.
For now, use the DVD to install OS X on a new drive partition to begin to build a foundation from which you can do more and mark this as emergency-only. You can clone it later if needed to a "working" system. SuperDuper is free for full copy, or use Disk Utility Restore even to set the source and 'target' destination volumes. -
my spotify will not open on my iphone. msg is telling me login password is incorrect but doesn't let me access password entry, just goes right back to apps screen
Double tap the home button to bring up the multi-tasking screen. Find Spotify and swipe upwards on the thumbnail of the app to close it. Then reset the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and release. After the phone reboots, try logging in again.
-
When I try to review a page, I get a message that some of the info is encrypted and some isn't, then it only shows half the information. how do I get it to show all thee info on the page?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
iPod was working without issues, this seemed to come out of nowhere... Again, does not seem to accept a charge, power on, etc....
Try here to fix:
iPhone and iPod touch: Frozen and unresponsive -
My Mac Mini is not starting properly, when it does it goes to a gray screen, but sits there making a clicking noise
Welcome to Apple Support Communities
What OS X version have you got? Press Option key and check if you can select OS X -
Suddenly, my PC will not play my iTunes music. What's up with this??
My PC based iTunes will not play any of my music. My albums are all there but will not play. Music plays from my iPod which is synced with the PC. I can play music from my iPhone which is in iTunes Match too. This is a new problem. Does anyone have any ideas?
I am using Vista and have iTunes 11.1.5.5Is iTunes endlessly saying "Accessing iTunes Store"? Or is something a bit different going on?
-
am unable to burn any info-photo ect on to a disk. I have a 27" I mac mid 2010 version. I put in a disk, hit burn, it runs for about 3 mins and ejects the disk sayiny there was an error with the drive and will not restart.
The optical drive has probably failed. It's a fairly common thing with these slim SuperDrives. Does it read any discs you put into it? You can try resetting the SMC and pram but I'll be surprised if it helps.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on
Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
2010 Mac mini Superdrive not burning DVD's
My mac mini is not burning DVD's right. I put in a 500GB harddrive a few months back and the SATA cables are attached correct. I can read DVD's but writing DVD's doesn't work. The process finishes but when after I eject the disc I can see that nothing is burning in the inner most part of the disc. When I put the disc back in the computer thinks the disc hasn't been burned and asks if it shuld be open in finder like a blank disc. I know a cd/dvd should burn from the center and spiral outward as it writes more data but it seems the disc is offset when it writes its first data, leaving the inner most part of the disc blank. Maybe I should reformat the OS and start from scratch to see if that helps. Any other ideas?
Strange these Memorex DVD's worked flawlessly a couple of times then I started getting these srange burns. I think I'm going to blitz this install I'm backing up with time machine now so I'll see what happens. Is there anyway to reapply an EFI update to make sure nothing is corrupt? I did notice what looked like brownish black burns on the logicboard when I opened it up to put the new harddrive in. They were on the long solder traces where they test the logic board by the the logic boards sata connections. I keep the system on 24/7 but don't really play any 3d or do anything that is too processor intense. Another thing is the superdriver seems to favor the left side when a DVD is initially inserted and ejected but moves to the conter when pressed all the way in I can't remember that being normal.
-
I am considering purchasing a new Mac desktop. I have, at present, a Liteon 851S ext CD/DVD write and a Maxtor 3200 USB ext hard drive. Will these work with a Mac desktop? My local Apple store could not answer my question.Happy New year to all.
Yes the Mac can read that drive but you would need to Copy the data off of it to the Mac as apposed to Move, which implies Deleting them from the drive as they were transferred from the external to the Mac. Since the Mac can Not Write to NTFS drives it can't Delete anything as that is really a Write operation, IE Making changes to the NTFS formatted drive.
Once you have that Data on Both your New Mac and you Older Windows PC you can format that drive to work on both system.
If you want to and plan on doing that post back and I'll explane how, it is simple but should be done on a Windows PC.
If you only plan on using it on the Mac from now on that is fairly simple also and is done on the Mac, Once you have the files from it stored on the Mac.
Yes you could burn those photos to DVD but that is just a waste of DVDs, you don't need to. -
Hi,
as thousands of other users, my WD Passport drive worked like a charm until yesterday and now it wont show on any computer, but does show in the Disk management and when plugged in , the Disk Management offers two ways of initialization : MBR and GPT
i dont understand any of that and want to know if any of those two methods will make the disk initialize wITHOUT loosing the data on the drive?
i looked on so many forums and some people say that it will and others that it will not erase the data.
can you please tell me what is correct?? also a suggestion is to add some more wording to that initializaiton dialog box so that we can know what initialization does and doesnt
thank you so much
tTry connecting it to a different computer to see if you can access the data, under no circumstances should you Initialize the drive as all existing data will be lost.
If you still can't access your files, then remove the drive from the case and connect it via an extra SATA cable and power connector (you usually need a desktop PC in order to do this if the drive is a 3.5 inch model, a 2.5in drive will fit into a laptop
if you have a spare slot).
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help. -
My Mac Mini was not sending a signal to the monitor. I powered down using the power button and now it will not start. When i power up I get a strange 2 tone sound, like a warning alarm. The fan starts, and the light comes on, but no screen.
I have tried with a wired USB keyboard and mouse using a single screen. Powered up with option pressed. No change.
Reset SMC no changeRun the Apple hardware test to see what it tells you. Run the extended test when prompted, which can take awhile.
Maybe you are looking for
-
How do I watch multicam with audio?
Made a nested sequence, turned it into multicam, but when I watch all angles simultaneously in the source monitor, there's no audio. How do I enable the audio tracks? I've tried turning them "on" on the timeline, selecting them, grouping them, nestin
-
Hi, There are now 10 patches out. Are they comulative? Do I need to install only patch 10? Thank you
-
MXF file importing trouble to CS5
I just got a Panasonic hpx 250 camera and its native files are MXF files. They are not compatible with my software, premiere CS5. Can anyone recommend a converter or other fix that will allow me to use MXF files with premiere, something that will lin
-
Dear experts, I am applying this inquiry for a customer. Please check it below: In Direct Posting each line creates an invoice and a seperate check for tax payments. We want one invoice and one check for all tax payments for that tax authority. Will
-
Exiting an applet with a QUIT button
Hi all, Please excuse me if this questions has been asked 1001 times before. I am creating a quit button in a trusted applet, but it seems that the System.exit(0) call is not permitted, with the following message: "Exception in thread "AWT-EventQueue