Mac mini with a fire wire external drive

I have 10 folders with pictures in my fire wire external drive, but mac mini cannot see the pictures in one of the folders. If you click the folder, it shows 0 items. However, if the folder is chosen as a screen saver folder, the pictures show as a slide show. Why is that?

Use the Disk Utility and repair that drive.

Similar Messages

  • Mac mini usb 3.0 and external drive with Sleep issue

    I have now a new mini with USB3.0.
    I attached an external sharkoon sata quickport h3.
    If i use an USB 2 cable everything is fine.
    When i use USB 3 cable then after sleep, OSX says that the external drive was not properly dismounted....

    So, i tried an external USB3 2,5" harddrive and it works directly on the mini.
    When i plug this drive to the sharkoon, it doesn't work.
    So it seems that the USB3 Hub of sharkoon isn't working properly with the power managament of osx.

  • Mac Mini Will not boot from external drive or install disk

    Hi,
    I just bought a new 2.0 ghz mac mini 1 gb ram. 120gb hdd.
    I have a separate external HDD attached and wanted to boot from this. It works with my MBP and IMAC.
    When i plug it into the Mac Mini and start up with Option key. It recognizes it.
    I then click on it. It automatically reboots.... then grey screen comes on. It goes black after about 10 seconds. then boots into original operating system.
    I also tried to use the MAC install Disk, thinking it might be a corruption in the shipped software. It does the same thing.
    I have MAC Install DVD on an external drive too. Same issue.
    I partitioned the HDD and installed a copy of the Mac install disk onto that with disk utility... Same thing grey screen, then black then back to original operating system.
    Not sure what is going on?
    thanks
    Chris

    Hi,
    Thanks.
    It is running 10.5.8.
    I am trying to boot up an external drive with 10.5.8 on it. It works on my Macbook Pro which is running 10.5.8, runs on my IMAC running SL. But doesnt work on the mac mini?
    It had been running SL, however there are a number of programs I have like Windows Live Sync which are not yet compatable with SL so i downgraded to 10.5.6 which came with the Mac Mini then loaded all updates.
    It seems to just go into an auto reboot as soon as i click on it.
    i thought it might be the firmware? Is it possible to downgrade them and then re-install?
    I have reset the PRAM.
    Any help would be appreciated.
    Thanks

  • Mac Mini won't read my external drive

    Bought a Seagate 500GB external harddrive for my mac mini, and stored about 100GB of information in the harddrive. Now, the mini won't read the external harddrive. I am wondering if there is a way to retrieve it... Can someone help me? I don't think I can afford to loose 100GB of information.... Any help is greatly appreciated!

    Clearly it has worked previously since you have data on it, but you haven't indicated what model of Mac mini you have (which can make a difference in terms of troubleshooting steps) and what circumstances surrounded the 'disappearance' of the drive - particularly as Boece says, whether it was disconnected (or powered down) without being first ejected from the desktop.
    If the drive isn't being seen in the profiler, there is a possibility that the drive is not, in itself, faulty. A damaged cable, a faulty hub or a problem with the system's USB ports could be responsible. Since you don't give any detail about your system, it's hard to focus better on advising appropriate steps - however, if you are using a hub, remove it and connect the drive directly to the system, preferably using a different cable. If it mounts, then it was the cable or hub. If not, then open Disk Utility (in Applications>Utilities) and see if it appears in the drive list on the left.
    If there's no hub and the cable checks out OK, then you might next perform a PMU reset (if it's a G4 mini) or SMC reset (if it's an Intel).
    To reset the PMU for a G4 mini
    - Unplug all cables from the computer, including the power cord.
    - Wait 10 seconds.
    - Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    - Let go of the power button.
    - Press the power button once more to start up your Mac mini.
    To reset the SMC on an Intel mini:
    -From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
    -Unplug all cables from the computer, including the power cord and any display cables.
    -Wait at least 15 seconds.
    -Plug the power cord back in, making sure the power button is not being pressed at the time.
    -Then reconnect your keyboard and mouse to the computer.
    -Press the power button on the back to start up your computer.
    If those steps don't help resolve the problem, post back with more information.

  • G4 MDD to Mac Mini (intel) Via Fire wire  (G4 in Transferr mode)

    Hey All, I have a weird problem.
    I am trying to Transferr all my info from a G4 MDD to an intel mac mini.
    My problem is when I try to boot my G4 into Transferr mode (holding the "T" down when it is booting).
    The G4 just shuts down. I have no other problems with this mac.
    Please, any help would be greatly appreciated.
    Thank you and best regards,
    Chris Lund

    I am looking into it. I don't think so though.
    I am pretty sure that I have not set a password as this article suggests. And there is no mention of a computer just shutting off from holding the "t" key down.
    I am going to be looking into it more out of curiosity than anything else. I was in a pinch, and moved my files manually across the network.
    I will keep you posted.
    Thanks,
    Christopher Lund

  • My new mac mini with fusion drive says I only have 36 GB of storage

    I have a new mac mini with the 1 TB fusion drive. When I look in storage in the About this Mac area, I'm told I have 6.67 GB free out of 34.62 GB. An Apple rep said that this is a bug in the system and that I have the proper amount of storage available. Wondering if anyone else has had this issue.

    I have just gotten of the phone with Apple Support here in Canada, more to let them know about this issue and yes, got the same message. The Fusion drive is very new technology and they have not heard much about this problem either. Their best advice was to wait untill the new iMacs role out with the same drive and see if the same problem is cropping up elseware. Maybe a solutiion will be forthcomming at that time?
    Seriously, I must say..... very disappointing Apple! Steve Jobs is probably rolling over in his grave. Since when does Apple role out a product that does not work 100% out of the box? Since when does Apple adopt a "wait and see" approach to possible hardware glitches? Where is the quality control people!!
    Even as a die-hard Macintosh fan, I must concede that Apple is loosing "street cred".
    Well, I have my complaint logged and will be awaiting further updates regarding this issue, but I won't be holding my breath.   

  • Mac Mini with OSX server still OK?

    HI All,
    I was going to purchase the mac mini that was geared up to work best with OSX server however that option is now no longer available and the mac mini's have downgraded slightly in terms of quadcore processors and 2tb harddrives.
    We run a small design studio, file sharing is becoming a large hinderance on workflow and I thought OSX server sounded like a good solution for someone with little knowledge of the area. We have four imacs, and three macbooks. Our team is growing fairly quick and that number should double next year.
    Any ideas would be much appreciated.
    Thanks,

    Just get the latest mac mini, add some external storage with a Thunderbolt 2 connection and that setup will work great for filesharing.
    You will get gigabit network speeds and since it's Thunderbolt 2 the mac mini will have no problem to serve those files across the network.
    Make sure you get external storage with a decent RAID setup like a Promise Pegasus for instance, and invest in a good back-up solution.
    Then clone your mac mini OSX Server setup daily towards the RAID and you're good to go!
    Get a Mac Mini with an SSD or Fusion Drive and 16GB of RAM. That'll keep you going for the next couple of years easy!
    Goodluck!
    Jeffrey

  • Help with setting up mac mini w/keyboard,mouse and external hard drive

    OK, first, I filled my mac mini with photos and music, so I bought an exteranl hard drive and thought I copied over my library, but only half of it shows up. (Another questions)
    But, now that I have 3 things using the USB ports and only 2 USB ports available, how do I set this up. I tired a 4 port, but what ever I plug into the 4 port USB does not work.

    If I understand the problem, you have a 4 port USB hub that is not working.
    The obvious suspect is the hub. I trust it is a powered USB hub, i.e. one you have to plug it into an external power source. A hub that draws its power from the Mini is not a good idea, since that would be asking the Mini to provide power to the two built-in ports as well as four external ones.
    (I have a Keyspan usb 2 four port externally powered hub hooked up to my Mini. It works flawlessly.)
    Even if your hub is powered, it is still the first suspect.

  • How to connect an external HD to a 2007 Mac Mini with FireWire

    I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

    Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
    If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
    monoprice.com is a good place to find these cheaply and in the length you need.

  • I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?

    I've got a late 2009 mac mini with a 320gb hard drive and I want to upgrade it to a 1tb drive or bigger. What HDDs are compatible with my mini?
    Because of the price I'm not interested in solid state drives, unless of course you want to send me $1,000.
    I've already got external drives but I take my mini back and forth to work and don't want to carry those drives with me.
    I'm not interested in buying a laptop. My mini works great so why waste $1,000 or more when I can buy a 1 to 3 TB hdd for under $300 and have exactly what I want. My late 2009 Mac Mini with a large hdd.
    I went to Crucial's website and they can't tell me what drives fit my Mac Mini. That's where I got my ram (8GB). I'm ONLY interested in name brand quality HDDs.

    The limiting factor in your 2009 mini is the max 9.5mm drive thickness.
    One of the largest capacity 2.5" drives that meets this criteria is the HGST (formerly Hitachi) at 1.5GB
    Any reputable SATA HDD you can find that is not thicker then this 9.5mm will work.

  • External fire wire hard drive sleep trouble

    I have two Seagate fire wire external hard drives. One is a 200 gig, the other a 300 gig. Both drives were working fine untill I think the last OS 10.4.2 update. Anyway, after my Imac wakes from sleep, when Finder calls up one of the external hard drives, finder hangs up with the color spinning wheel. Also, if Itunes calls up the disk for a song, it will hang also. I have to reboot. The drives will not return from their sleep state, I guess. My USB Maxtor external 300 gig drive works fine, but it does not seem to power down like it once did. Any ideas how to fix this? I had to just turn off the firewire drives. I do keep an Ipod attached via firewire, and it works fine.

    Sounds like you need to run the repair option in Disk Utility on the 2 firewire drives, see if that fixes the problem.
    You may need to run repair 2 -3 times just to make sure.

  • Mac mini's best choice of external hard drive?

    What would be the best way to back up a Mac mini; using a G-Tech,Lacie,Iomega, or something else?

    Buy from a reputable vendor and try to keep to brand names that have a good reputation as well. I've been pleased with the Western Digital external drives as well as Seagate's. Maxtor has had some issues in the last 18 months and I'm not sure those have been resolved yet. For backing up FireWire is slightly more preferable because it tends to have better sustained write/read speeds than USB2 but heck, my backup is done in the background and doesn't affect my ability to surf or write so I really don't care one way or the other.

  • I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I hav 260000 mp3 stored on A My Book 3 TB external Fire wire 800 Drive - when I play songs I get short interuptions every 20 to 30 seconds. Can't iTunes handle that?

    I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

    I'm using iTunes 10.6.1 on an iMac 2,66 Ghz intel core Duo with8GB DDR3 and Lion 10.7.3 I have 260000 mp3 stored on a My Book 3 TB external fire wire 800 Drive - when I play songs I get short interruptions every 20 to 30 seconds. Can't iTunes handle that number of songs?

  • Can I replace the optical drive on a 2010 mac mini with a second hard drive?

    i was just wandering how easy it would be (if at all) to replace the optical drive on my 2010 Mac Mini with a second hard drive
    we use it as a media server only, and the DVD is almost never used

    http://eshop.macsales.com/shop/drive_bracket/datadoubler/

  • How do I erase the hard drive on my mac mini with OS X lion

    How do I erase the hard drive on my mac mini with os x lion

    Restart with the Command and R keys held down and use the Disk Utility from there.
    (127020)

Maybe you are looking for

  • Shipment is to be blocked if Letter of credit date has expired

    Shipment must be blocked (provision for Delivery order reversal) if Letter of credit Last Date of Shipment is expired: Example as follow: - SO 100002703 item 10 - The LC with financial doc 1062 - The last shipping date of Finance.doc 1062 is 30.09.20

  • Works fine in debug but not when published

    So I have simple navigation code setup to step through frames (I'm using Flash instead PowerPoint--too many pictures that are PSDs and illustrations that are AIs to do the conversions over to something PowerPoint understands). The code: stop(); stage

  • Video on fitness equipment.  Need connector?

    The fitness center I go to has Star Track equipment with an ipod docking station. My wife has an older ipod classic where she set up the video out and just drops it on the connector and all works fine. I just got a new nano and when I do this, it jus

  • How to make an attendance monitoring system

    Hello there, I've just made a system that allows records the time in and time out of the some people. But how do you track people that didn't even check in at all? How do you know if there's a person that was supposed to be present, but didn't come a

  • Error in executing function

    i am writing this function in which i pass the patientID which in number and this function returns the name of the patient i compiled this function i got compiled and message came Warning: execution completed with warning FUNCTION Compiled. but warni